Used Base for sale (6,331)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm Kdsdpfey Thl Ijx Apdsl -Dimensions: see photo technical drawing -Overall dimensions: 85/65/H55 mm -Total weight: 1.6 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set Kjdpoy Thh Nsfx Apdsdl -Jaw width: 20 mm -Dimensions: see photo technical drawing -Overall dimensions: 75/80/H50 mm -Total weight: 1.4 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set Kdjdpfx Apey Thg Esdjl -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H48 mm -Total weight: 1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Kdodpfx Apsy Thfhodjl -Top jaws: 4-piece hard rotary jaw set -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H47 mm -Total weight: 1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/90/H55 mm Kdjdpfjy Thdksx Apdol -Total weight: 2.1 kg

Condition: used, Year of construction: 2020, Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) Application: Depalletising of new glass containers Configuration: Z-arrangement with pallet infeed and upper-level container discharge Pallet handling: Pallet lifting unit with automatic empty pallet discharge Discharge table: approx. 5,000 mm length Conveyor: Steel chain conveyor Drives: Servo drives (SEW) Sweep-off system: Four-sided centring carriage, servo-driven Layer handling: Integrated handling module with suction gripper system for layer pads and top frames Vacuum system: Ejector-based System Configuration: Pallet lifting unit Container discharge table (approx. 5,000 mm) Steel chain conveyor system Handling module with suction gripper Packing material magazine Empty pallet discharge system Safety fencing (approx. 25 m) Light barriers and safety circuits Kdedpfx Aey Tn D Djpdol

Year of construction: 2018, condition: used, This listing is for a Beckman Coulter CytoFLEX A00-1-1102 Flow Cytometer. The unit is in full working condition and is ready for immediate release. This unit is MISSING the main software dongle. The Beckman Coulter CytoFLEX A00-1-1102 is a state-of-the-art flow cytometer designed to deliver unmatched performance and adaptability for both simple and complex research applications. This compact benchtop system offers superior sensitivity, resolution, and flexibility, enabling precise nanoparticle and fluorescence detection. Key Features: - Exceptional Sensitivity and Resolution: Ideal for applications requiring nanoparticle and multicolor fluorescence analysis. - Upgradeable Configuration: Built-in upgradability supports up to 3 lasers and 13 colors, ensuring your system evolves with your research needs. - Compact Design: At less than 22.7 kg and dimensions of 40.6 cm x 40.6 cm x 33 cm, it fits seamlessly into any lab workspace. - Plug-and-Play Filters: Versatile bandpass-only light collection system for streamlined experiments. - CytExpert Software: Experiment-based software simplifies multicolor setup and quality control (QC). - Ease of Use: Intuitive operation, maintenance, and installation—ready to run within minutes. - Flexible Sample Handling: Accommodates both 12 x 75 mm tubes and microtiter plates for diverse experimental needs. - Performance Specifications: - Lasers Supported: Blue (488 nm), Red (638 nm), and Violet (405 nm). - Fluorochrome Detection: Supports a wide range, including FITC, PE, PC5, APC, and more. - Future-Proof Design: Upgrade configurations in less than a day, ensuring longevity and cost efficiency. Applications: Kdjdpfx Apoxxx N Esdsl - Small particle analysis - Multicolor flow cytometry experiments - Advanced fluorescence detection

Condition: refurbished (used), Year of construction: 2015, operating hours: 6,727 h, functionality: fully functional, overall weight: 4,824 kg, fuel type: diesel, tank capacity: 1,000 l, power: 160 kW (217.54 HP), output current: 288 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 200 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Stamford, For sale is a Powerplant AS200 IS2 diesel genset with 200 kVA prime power, manufactured in 2015, powered by an Iveco CURSOR87TE1F.S550 engine with Stamford alternator. Total operating hours: 6727h. A key feature of this unit is the HJS Emission Technology Stage IIIA to Stage V emission upgrade carried out by HJS Emission Technology UK in Swindon. The genset was equipped with a modern exhaust aftertreatment system designed to significantly reduce emissions and allow operation in emission-sensitive environments and projects. The genset is already registered with CVRAS/EST. In accordance with CVRAS/EST requirements, a telematics unit has been installed to monitor NOx performance. The first year of telematics service is included. After 12 months, an annual service fee applies. The telematics connection allows remote monitoring via the HJS online portal, including AdBlue refill status, system condition and NOx performance data, helping operators maintain compliance and monitor the system efficiently. The retrofit system combines proven exhaust aftertreatment technologies including: Diesel Oxidation Catalyst (DOC) Diesel Particulate Filter (DPF) SCR system with AdBlue injection The DPF reduces particulate emissions, while the SCR system lowers NOx emissions. The installed 80-litre AdBlue tank provides approximately 30 operating hours at full load without refilling, depending on load profile and operating conditions. This retrofit solution enables existing generators to meet modern Stage V emission requirements without the immediate need to purchase a new machine. Installed HJS components: 10.5” DOC 10.5” DPF 13.0” SCR 80-litre AdBlue tank Control unit Telematic unit AdBlue pump Fuse box Display The original silencer was removed during conversion. Operating time after the upgrade is only approx. 10 hours. This genset is ideal for construction, industrial, rental and infrastructure projects where low emissions and NOx monitoring are required. It is also suitable for use within London Low Emission Zones and other projects with strict emission regulations. Technical Specifications: Generator make: Powerplant Model: AS200 IS2 Prime power: 200 kVA Engine: Iveco CURSOR87TE1F.S550 Engine power: 160 kW RPM: 1500 Alternator: Stamford UCI274H1 Control panel: Deep Sea Electronics DSE7410 Housing: Canopied Year: 2015 Dry weight: 3762 kg Wet weight: 4824 kg Voltage AC: 400V / 230V Voltage DC: 24V Frequency: 50 Hz Serial number: 4184/01 Note: Sold as a used industrial machine. Inspection and technical verification prior to purchase are recommended. All information is provided to the best of our knowledge based on available technical data. If you have any questions or require further information, please contact us. Kjdpfxjy R D Hcj Apdedl

Condition: good (used), Year of construction: 2004, Safety cabinet, hazardous materials cabinet, safety cabinets, tool cabinet, steel cabinet, workshop cabinet, electronics cabinet, battery cabinet, hazardous materials cabinet, safety cabinet -Manufacturer: asecos, hazardous materials cabinet, safety cabinet with ventilation attachment -Design: With 3 shelves, drip tray, transport base -Technical data: see photos Kdedjy S R U Aopfx Apdsl -Dimensions: WDH 1200/640/2140 mm -Transport weight: 278 kg

Condition: good (used), Year of construction: 2004, Safety cabinet, hazardous materials cabinet, safety cabinets, tool cabinet, steel cabinet, workshop cabinet, electronics cabinet, battery cabinet, hazardous materials cabinet, safety cabinet Kjdpoy S R Iijfx Apdsdl -Manufacturer: asecos, hazardous materials cabinet, safety cabinet -Design: With 3 shelves, drip tray, transport base -Technical data: see photos -Dimensions: WDH 1200/640/H1970 mm -Transport weight: 276 kg

Condition: new, Year of construction: 2024, approx. 512 units, Auer, ESD R-KLT 6429 (60x40x28cm) - used -: Kjdpfxjvx E Urs Apdedl Ex-stock price: now only €6 instead of €9 (net) Full lot purchase only! Manufacturer: Auer Type: 6429 New item ESD R-KLT number: 6429 ESD R-KLT container with composite base External dimensions (L x W x H): 60 x 40 x 28 cm Internal base dimensions (L x W x usable H): 54.4 x 36.4 x 24.2 cm Base design: composite base, closed Volume: 48 litres Material: ESD PP Weight: 3.36 kg Colour: traffic black, similar to RAL 9017 Condition: unused Available: immediately Location: 41238 Mönchengladbach

Condition: good (used), Approx. 50 open front storage bins / stacking and transport containers SSI Schäfer, type: 14/7-0a, 710/500x820x610mm – used -: Price per unit ex location: €59 (net)! Price for complete purchase: only €49 (net) per unit! Manufacturer: SSI Schäfer Type: 14/7-0a Year of manufacture: unknown Colour: painted Material: metal Weight (kg): 35 Nominal dimensions (mm) LxWxH: 700x800x600 External dimensions (mm) LxWxH: 710/500x820x610 Load capacity (kg): 800 kg Stack load (kg): 2400 kg Wall thickness (mm): 1.25 Base thickness (mm): 2 Condition: good Available: immediately Location: Mettmann Kedoyzd Iuopfx Apdodl

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 169 h, load capacity: 1,400 kg, lifting height: 2,500 mm, fuel type: electric, mast type: simplex, construction height: 1,950 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Mast type: Standard Condition: As new Technical condition: New Battery voltage: 24V Battery year: 2025 Battery condition: New Description: Price includes a new safety (UVV) inspection. The device is in like-new condition based on the low number of operating hours. Charger with matching plug included. We are happy to arrange cost-effective transport for you. Lease-purchase is generally possible. 12 months warranty. We are an official Jungheinrich partner. CE certificate, Kdjdpfoy Ap U Aox Apdsl Operator platform

Condition: used, Used Netzsch model PMD VC2500 stainless steel variable capacity pre-mix disperser. Approximately 600-2500 litre working capacity. Unit has welded base and bolted dished top head. Has top entry stainless steel 3-tier 4-blade pitched paddle agitator direct driven by 7.5kW, 415 Volt, 3/50, 1435rpm motor via Renold model PM60 gearbox rated 48.2/1 reduction ratio. Unit has bottom entry stainless steel scraped surface agitator belt driven by 7.5kW, 3/50, 1,440rpm motor via Renold model SMH8 gearbox rated 25/1 reduction ratio. Has external heating/cooling jacket. Unit has bottom discharge. Kdodpoy Ddv Defx Apdsl

Year of construction: 2012, condition: good (used), functionality: fully functional, Rotary Airlock Valve / Rotary Valve Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge strips Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Max. volumetric flow: 28,000 m³/h Kdodey Tiagopfx Apdol Max. inlet diameter: 450 mm Speed: 22 rpm Rotor width: 1,500 mm Rotor diameter: 1,200 mm Dimensions: 2,200 x 2,200 x 2,500 mm (LxWxH) Weight: approx. 3,000 kg Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video above on our website or on our YouTube channel. Inspections, including under power, are possible at any time by prior arrangement. We are happy to answer your questions about the machine by phone, Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the stated information or possible errors. Offers are non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex-works, advance payment required, without warranty or guarantee.

Condition: used, functionality: fully functional, mileage: 311,153 km, power: 338 kW (459.55 HP), first registration: 01/2024, fuel type: diesel, overall weight: 8,460 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Globetrotter XL Single energy battery system (2 batteries) NEW D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR I-shift Automated 12-speed - GCW 60 tonne Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre Kdjdpfx Apoy Sgtzsdel 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyre 315/70R22.5 Drive tyre 315/70R22.5 Jost JSK 37 cast fixed or sliding fifth wheel 3800 mm 2.31:1 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK 65 litre under/behind cab Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Technology Secondary colour information display. Fleet Management System gateway - required for telematics and Dynafleet dealer fit. Exterior LED headlamps V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor

Condition: used, functionality: fully functional, mileage: 184,970 km, power: 338 kW (459.55 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 460 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI Step E Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Kdedpsy Sf Evefx Apdsl Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 65 litre under cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side Skirts: YES Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour

Condition: used, functionality: fully functional, mileage: 206,687 km, power: 338 kW (459.55 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 460 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI Step E Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 65 litre under cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Kodpsy Sfinefx Apdodl Mirror cameras: no Automatic - LED headlights Roof lights: without Side Skirts: YES Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour

Condition: like new (used), Year of construction: 2023, 5x Vacuum Tube Lifters with Column Slewing Crane, 4m Jib, 4m Height, 80kg Load Capacity – used –: Price per unit, ex site: €12,500 (net), dismantled, packed, and loaded! Manufacturer: Timmer Kdjdpfxexugfts Apdol Model: S5/SON Type: lightLIFT 50 kg Article No.: S5-4000/SÄ4000/43-80SO Year of manufacture: 2023, rarely used Short Description/Application: Handling of cartons up to max. 40kg Ideal for Spax cartons Tube lifter: lightLIFT 50 kg Model: UST-LL-HE-140/50-2.5-FH Lifting unit: lightLIFT with fixed handle Handle length: 300 mm Lifting capacity: 50 kg Lift tube Ø: 140 mm Lift tube length: 2,500 mm Unit includes: - Electric vacuum blower Medium incl. motor protection switch, enclosure for motor protection, and vibration dampers Weight: approx. 54 kg Vacuum suction hose Material: PVC Diameter: 38 mm, length: 15 m Colour: Black For vacuum generators: SMALL, MEDIUM, LARGE and vacuum pump Double holder for parking the suction pads as a clamp solution for crane column 180x180mm Dual-side mount for suction pad 62740700 and cross bar 62740650 Colour: RAL7035 light grey Column slewing crane with fastening material Column slewing crane with jibs, Type RB Load capacity: 80 kg Jib length: 4,000 mm Design: - Sturdy slewing brackets - Smooth-running jib bearings (Zedex-25/K) - Manual slewing resistance adjustment (prevents arms from swinging by themselves) - Slewing range approx. 250° each Jib Arm: - 4,000 mm jib arm length - Adjustable support strut - Jib made of profile steel - Reinforcement element - P3 profile running rails (42.5x47.5x3mm), galvanized, under the jib arms - Load capacity: 80 kg Incl. slewing angle limiter Column: - Height (lower edge of running rails): 3,500 mm - Column height: 4,000 mm - Column 180x180x6 mm - Base plate with gusset plates (600x600x15 mm, optionally 1000x1000) Original new price for the 5 units approx. €70,000 (net) Available: immediately Condition: very good Location: Hamm AB (acceptance report), operating manual, etc. available as PDF upon request.

Year of construction: 2016, condition: good (used), RFID tunnel, Sick, belt width 83 cm, ideal for capturing content and quantity, e.g., in cartons – used – Price per unit ex location (net): €9,950! Manufacturer: Sick Year of manufacture: unknown, can be clarified, probably 2016 Model: to be provided Type: to be provided P/N: to be provided S/N: to be provided Tunnel width: external approx. 1.10 m Tunnel length: to be provided Belt conveyor: Belt width: approx. 83 cm Total conveyor element width: approx. 88 cm Element length: approx. 4 m Condition: good Available: immediately Location: Unna Kdsdpfxswx H Rgo Apdel Gain insight into cartons and check content and quantity without having to open packaging. Since shipment verification is crucial to ensure customer satisfaction, make sure your customer receives exactly what they ordered with an RFID tunnel system. This system ensures that the ordered goods are delivered, minimizing expensive returns. 2.1 Intended Use The RFID read/write device RFU630-041xx is an intelligent 4Dpro sensor of the RFU6xx (UHF) product family. Version (operating range): Long Range. The stationary device automatically identifies radio-based data carriers (transponders) on moving or stationary objects. The device also supports management of the data carriers. The compact read/write unit processes the data of all common passive transponders via a maximum of 4 external antennas in accordance with ISO/TEC 18000-6C and EPCglobal UHFC1G2 within the region-specific UHF carrier frequency range. The device does not have an integrated (internal) antenna. Intelligent process logic enables processing either as a stand-alone solution or grouped in network operation. The device sends the read results to a host computer via its host interface. The computer coordinates further data processing within the workflow. Through its host interface, the device receives corresponding commands for data carrier management (writing, reading, etc.). Device variants refer to regional allocation; see device overview.

Year of construction: 2016, condition: good (used), Approx. 65 aluminum spring base trolleys, Gmöhling – used – : Price per unit ex location: only €450 (net) When purchasing 20 units or more: only €395 (net) / unit For entire batch purchase: only €350 (net) / unit Manufacturer: Gmöhling Model: unknown Year of manufacture: unknown, but no older than 2016 Height from ground: approx. 95 cm Length: approx. 1.11 m / Internal length: approx. 1 m Width: approx. 66 cm / Internal width: approx. 62 cm Including forklift pockets Spring force unknown, likely 70 kg Kedpfx Aowxw Ddepdodl 2 fixed casters and 2 swivel casters Continuous edge and bottom profiles to reinforce the container walls Elastic impact protection on the upper trolley frame provides effective protection for both trolley and contents Extremely robust and dimensionally stable Internal height: approx. 580 mm Volume: approx. 380 liters Finish: anodized Color: aluminum silver Net weight: approx. 48 kg Original price approx. €1,100 Condition: good Available: immediately Location: Unna

Condition: used, functionality: fully functional, mileage: 291,635 km, power: 338 kW (459.55 HP), first registration: 01/2024, fuel type: diesel, overall weight: 8,460 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Globetrotter XL Single energy battery system (2 batteries) NEW D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR I-shift Automated 12-speed - GCW 60 tonne Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyre 315/70R22.5 Kedpfx Apsy R T Ivodjdl Drive tyre 315/70R22.5 Jost JSK 37 cast fixed or sliding fifth wheel 3800 mm 2.31:1 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK 65 litre under/behind cab Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Technology Secondary colour information display. Fleet Management System gateway - required for telematics and Dynafleet dealer fit. Exterior LED headlamps V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor

Condition: good (used), Approx. 1,400 pieces, Euro stacking transport boxes, SSI Schäfer, EF 6220 D1, 60x40x22cm, with half-height opening on the narrow side - used - : Price ex location: €5,250 (net)! Only sold as a complete lot! Manufacturer: SSI Schäfer Model: EF 6220 D1 Year of manufacture: unknown Color: red Dimensions External width [mm]: 400 External height [mm]: 220 External length [mm]: 600 Base dimensions: 600 x 400 Internal width [mm]: 353 Internal height [mm]: 216 Internal length [mm]: 553 Usable height in stack [mm]: 196 Condition: good Available: immediately Location: NRW Kdedpex Eaxnjfx Apdol

Year of construction: 2021, condition: new, Cantilever rack, single sided, 3m height, 1.20m arms, 750kg per arm - New - : Price ex location incl. loading! 1 racking unit with 4 uprights 1.988.-€ (net)! Surcharge for cantilevers with deflectors for this rack: 40.-€ Transport costs within D (without islands): 430.-€ (net)! Of course they can also build longer or shorter shelf units from it by omitting or buying more frames (or also by different axle distances), this example with 4 frames is only the most common shelf solution!!! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights one-sided approx. 3,000 mm high, hot-dip galvanized, IPE 160 base and arm depth 1200 mm with 3 height adjustable shelf arms each load capacity at load center 600mm 750 kg per arm / 2250 kg per upright with 4 uprights per arm level 4 x 750 kg = 3.000 kg, arms IPE 100, with longitudinal and diagonal bracing e = 1300 mm, standard is 1.30m - so if you do not specify otherwise we deliver the rack with a center distance of 1.30m. Other center distances are possible e.g. 1m, 1,25m against small surcharge also 1,50m or special dimensions! As a standard delivery, the length of a shelf row with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm types etc.) selectable! Please contact us! Ksdpfx Ajddmp Aepdodl

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Kjdey R Nnfspfx Apdedl Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.