Used Bed Dryer for sale (5,723)

Condition: used, Year of construction: 1978, swing diameter 1000 mm Bsdpoy Nd S Aofx Al Iowl 4-jaw-chuck diameter 800 mm faceplate 1000 mm turning diameter over bed slide 750 mm turning dia. in gap 1500 mm turning length 1500 mm turning speed range - spindle 4-710 U/min total power requirement 12 kW weight of the machine ca. 5,6 t dimensions of the machine ca. 3,5 x 1,7 x 1,7 m Machine has a 4 position toolholder with quick change device and DRO.

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Bsdpfx Ajygvniol Ijwl

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: G70303, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 16mm Bed length between centres 1250mm Spindle speeds (16) 25-2000rpm Bsdoy Hh Ivepfx Al Iewl Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. weight 1800Kg Machine in Metric execution MACHINE EQUIPPED WITH Newall 2 axis DRO System 3 Jaw chuck Quick change toolpost and 3-off toolholders Stationary steady Chuck guard Coolant system Rear splashguard

Condition: used, Year of construction: 2007, x-travel 2.000 mm y-travel 800 mm Bjdpjy Nfbrofx Al Iowl z-travel 1.000 mm Control Heidenhain iTNC 530 spindle tunring speed 4.500 U/min tool taper SK 50 number of tool places 20 Pos. table surface area 2.000 x 700 mm max. table load 4.000 kg weight of the machine ca. 11.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2003, x-travel 2.500 mm y-travel 800 mm z-travel 1.250 mm Control Heidenhain iTNC 426 spindle tunring speed 4.000 U/min tool taper ISO 50 table surface area 2.200 x 750 mm max. table load 4.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Automatic universal milling head, 0 and 180 degrees Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Bwodpfxjy I Dg Rj Al Isl Prior sale is reserved.

Year of construction: 2024, condition: excellent (used), Axe & Status Tuscan LL550 X 6000 5-Bedway Heavy Duty Lathe With Fanuc Series 0i-TF Plus CNC Control (2024) Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed Width 990mm. Axis Travel 'X'=480mm, 'Z'=6,000mm. Feed Rate 'X'=0-3,000mm/min, 'Z'=0-3,000mm/min. (2) 'FCG-32C' Ø800mm x Ø320mm Through Bore 4-Jaw Manual Chucks (Front & Back of Spindle). (2) SMW Autoblok 'K4 ZSW' Programmable Steadies, Range Ø52mm - 280mm. Headstock Spindle Nose A2-20. Spindle Bore Ø305mm. Spindle 'X' Axis Servo Motor 3kW, 'Z' Axis Servo Motor 7kW. Spindle Speeds 7-400rpm (Motor 30/37kW), Morse Taper 6. V12-200 Hydraulic 12 Station Turret, 32mm Tool Size, Ø50mm Boring Bar Holder Dimension. Motorised Tailstock Body Movement, Quill Ø165mm, Quill Travel 250mm, MT 6. S/No LL393806057 (2024). Bwedpeyw Tkwjfx Al Ijl Electrical Specification AC220V/50Hz, 3 Phase. Automatic Doors & Full Cover Guard, Motorised Fondex Front & Rear Chip Conveyors, Auto Lubrication & 15-Bar Coolant System, Air Conditioned Electric Cabinet, Halogen Work Lights, Unimag DS-2030-30 Disc Type Oil Skimmer, Yong Teng E04-AL60 kVA Transformer, Plus: (2) Steel Cabinets: (1) 500mm x 500mm x 800mm With 6 Drawers & (1) 1,000mm x 700mm x 1,000mm With 6 Drawers, Full Range Of Machine Manuals, Ø800mm 4-Jaw Manual Chuck (Already Described In Original Detail) With Backing Plate & Spare Jaws, (11) Assorted C6 Capto Adaptors Including Boring Bar Holders, Tool Blocks & Facing Tool Holder,; Boring Bar Attachment (To Hold up to 150mm). Overall Dimensions Approx 8,470mm x 3,050mm x 2,370mm High; Weight Approx 20,500kg.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details Bwjdpoy Idhhjfx Al Isl x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Movement Y-axis 2100 mm Movement Z-axis 1300 mm Movement W-axis 1000 mm C-axis-swivel of milling head body 360 ° Bodpfxoy Egnle Al Iswl A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E Bjdpfxjv I Akve Al Iswl - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: used, Year of construction: 2008, machine/vehicle number: PUVD 1600-2, - Producer Printworld - Type PUVD 1600-2 - Year of construction 2008 - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt - Feed speed adjustable 2 - 50 m/min - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location Bwedpfx Aljumvkco Iol - Voltage / HZ 400 / 50

Condition: used, mileage: 375,582 km, power: 309 kW (420.12 HP), first registration: 07/2005, fuel type: diesel, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,200 l, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, Year of construction: 2005, Equipment: ABS, air conditioning, cruise control, electric window regulation, onboard computer, traction control, = Additional options and equipment = Bsdpfx Aljy Ipwbo Iowl - Aluminium fuel tank - Low noise - Air conditioning - Metallic paint - Sliding roof - Sleeper cab - Sun visor = Further information = Technical specifications Number of cylinders: 6 Engine displacement: 12,130 cc Transmission: I-Shift, automatic Weights Kerb weight: 6,810 kg Payload: 12,190 kg Gross vehicle weight: 19,000 kg Maintenance, history and condition APK (Technical Inspection): valid until 07.2026 Technical condition: good Visual condition: good Additional information Contact Vitali Lenda for further details.

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Bsdorx Rxtspfx Al Iswl Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 16,000 m/min, feed rate Y-axis: 16,000 m/min, feed rate Z-axis: 16,000 m/min, spindle speed (max.): 4,000 rpm, table width: 900 mm, table load: 10,000 kg, table length: 2,700 mm, total height: 3,440 mm, total width: 6,000 mm, total length: 7,000 mm, overall weight: 24,000 kg, power: 38 kW (51.67 HP), CNC Bed-Type Milling Machine Ki-Heung - U1050 MACH-ID 9598 Make: Ki-Heung Type: U1050 Control: HeidenHain iTNC530 Year: 2014 A4 Automatic head 2.5 x 2.5 Degrees Drum AC 24 positions HeidenHain iTNC530 HeidenHain HR-410 Wandwheel Flatt guideways / High Ridgid machine  Oil Chiller Covered CE-Doors X-Axis: 2500mm Y-Axis: 1050mm Z-Axis: 1600mm Table Length: 2700mm Table Width: 900mm Table load: 10000 Power on spindle: 38kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 16000mm/min. Feed rate Y-Axis: 16000mm/min. Feed rate Z-Axis: 16000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 7000mm Width: 6000mm Height: 3440mm Bsdpfx Aey Ew Suol Iewl Weight: 24000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2020, Atlas Copco FX 14 Bodpfx Aowhv Adjl Ijwl Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 12,00 m³/min

Condition: good (used), Year of construction: 2013, Kaeser TAH7 Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Bwsdpfx Aljwhvqzo Ijl Flow rate: 0,60 m³/min

Year of construction: 2007, condition: excellent (used), Inline can / jar washer & dryer Completely stainless steel Container Max 180mm wide & 250 hight as-is or Bsdpfx Aoh Eazzsl Iowl tested and adjusted to costomer needs

Condition: excellent (used), Year of construction: 2000, overall weight: 6,000 kg, total height: 300 mm, total length: 4,000 mm, total width: 2,000 mm, plate height: 300 mm, plate width: 2,000 mm, 8 units Precision Leveling wedges BILZ PK4/72 Size 200 x 200; x 80 mm Load 38.000 N/pc Levelling +5 to - 7 mm Floorplate Length: 4000mm Bwedjy Efqxopfx Al Iel Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 6 Distance from T to T-slot / Jump:320mm T -slot size: 36mm Weight a plate approx.: 6000kg Number of matching pieces: 1 Length: 4000mm Width: 2000mm Height: 300mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), overall weight: 4,600 kg, total height: 305 mm, total length: 4,000 mm, total width: 1,640 mm, Floorplate Length: 4000mm Floorplate Width: 1640mm Height: 305mm No. Of T-slots: 5 Distance from T to T-slot / Jump:330mm T -slot size: 28mm Number of matching pieces: 1 Length: 4000mm Width: 1640mm Height: 305mm Weight: 4600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Bwjdpfjy D Ngnox Al Iel

Condition: used, Year of construction: 2009, travel -x axis 2.500 mm travel -y axis 1.000 mm travel -z axis 1.250 mm control HEIDENHAIN - iTNC 530 turning speed range 20 - 4.000 U/min with NC rotary table 1.000 x 1.000 table surface area 2.700 x 850 mm numbers of positions in the tool changer 40 tool taper SK50 Bedjy E Txwepfx Al Iowl CNC Bed Type Milling Machine | SORALUCE - TA-25-A equipped with NC-rotary table, radio measuring probe and 40-way tool changer. The machine is in good condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: A25A | TA-25 A | TA 25 A

Condition: used, Year of construction: 2015, travel -x axis 3.000 mm travel -y axis 1.500 mm travel -z axis 2.000 mm control HEIDENHAIN - iTNC 530 turning speed range 0 - 6.000 U/min with NC rotary table 1.600 x 1.400 mm workpiece weight 12.000 kg numbers of positions in the tool changer 40 tool taper SK50 CNC Bed Type Milling Machine - Universal | MTE - RT-3000 equipped with integrated NC-rotary table , ITC (20 bar), radio measuring probe and 40-way tool changer. The machine is in good condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Bwjdpfx Aloy E Txqs Isl #Tags: RT30 | RT 30

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, year of last overhaul: 2025, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! Technical details of the machine: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range: 15,000 rpm Bwodev Rw Uuopfx Al Iol Feed rates: X, Y & Z axes (mm/min): 10 - 10,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle KW25 - Chip conveyor - Cooling lubricant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA RUE 45 linear guideway system on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table load: 5,000 kg, table length: 2,700 mm, overall weight: 15,500 kg, year of last overhaul: 2024, RefurbishmentPLUS by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2007 Capacities / Travel: Longitudinal (X): 2,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,200 mm Table size: Length: 2,700 mm Width: 850 mm Number of T-slots on the table surface: 6 T-slot width: 22H12 mm Reference slot: 22H8 mm Distance between slots: 140 mm Max. table load: 5 t/m² Bwjdpfxeun Nnqs Al Isl Paint finish: RAL 5011 (steel blue) and RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 form A Main drive: Drive power: 100% duty cycle KW24 Spindle speed range: Spindle speed: 20-4,000 rpm Torque: 479 Nm Feed rates: X, Y, and Z axes mm/min 10-10,000 Max. rapid traverse speed: X, Y, and Z axes mm/min 25,000 Weight: approx. 15,500 kg BASIC MACHINE EQUIPMENT: Heidenhain iTNC 530 HSCI Automatic milling head, diagonal H200 Chip conveyor Coolant system STANDARD EQUIPMENT: - Portable electronic handwheel HR 510 with 3m spiral cable - Hydraulic counterbalance acting directly on the vertical slide - 3D thermal expansion compensation for Heidenhain CNC contouring controls - Complete splash guard enclosure consisting of two front doors and one rear door for operating the machine from the front and rear. All doors are equipped with viewing windows. - Heidenhain AC drive motors in all axes with diagonal drive technology - INA RUE 45 linear guideway system in all axes with central lubrication - Ball screws (IT5) in all axes - Heidenhain direct linear measuring system in all axes - Telescopic covers for the X-axis guideways - Automatic cyclic lubrication for all axes and motion components - Work area lighting Refurbishment+ – what does that mean? The RefurbishmentPLUS line offers you a machine that has been uncompromisingly restored to its original technical and visual condition. All assemblies have been completely disassembled, repainted, and rebuilt with new, original spare parts. Cables, hydraulics, guides, spindles, rolling bearings – everything new!

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table length: 3,700 mm, overall weight: 18,500 kg, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2007 Travel / Stroke Capacities: Bodpfxoxgn Efs Al Iewl Longitudinal (X): 3,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,000 mm Table dimensions: Length: 3,700 mm Width: 850 mm T-slots: 5 x 22 H12 Reference slot: 1 x 22 H8 T-slot spacing: 140 mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 24 kW Spindle speed range: Spindle speed: 20-3,000 rpm Torque: 479 Nm Max. feed rate: X, Y, and Z axes 25,000 mm/min Mean acceleration: 2 m/s² Weight: approx. 18,500 kg HEIDENHAIN iTNC 530 HSCI Swiveling control pendant including Heidenhain iTNC 530 control (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatic indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic tool changer: Automatic tool changer (random carousel) with 20 magazine positions: The automatic tool change is carried out in the vertical position of the tool spindle. Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Chip conveyor package: Three chip conveyors, two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, discharge height: 1,000 mm Coolant System 2: Coolant/lubricant system 2 with discharge via shower ring and internal coolant supply according to DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of high-pressure pump from 15 bar. RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced by us following a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, all identified visible defects and faults are professionally repaired by our expert service team.

Condition: used, Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, RepairFIT by Dornhöfer The Difference. Bedpfsygipajx Al Iswl Installation & Commissioning Included! TECHNICAL MAIN DATA Year of manufacture: 2014 Travel/Capacity: Longitudinal (X): mm 3,000 Transverse (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table/Clamping surface: Length: mm 3,200 Width: mm 1,000 Number of T-slots on table surface: pcs. 7 T-slot size: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Maximum transport load: kg 11,000 Paint: graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Maximum drive power, from 198 rpm: kW 30 Spindle speed range: Spindle speed: rpm 20-6,000 Maximum torque: Nm 935 Speed control: 3-stage (oil-cooled) with automatic changeover Feed rates: X, Y and Z axes mm/min: 2 – 15,000 Maximum rapid traverse speed: X, Y and Z axes mm/min: 25,000 Maximum feed force: X, Y and Z axes: N 22,000 Space requirements: Length approx. BT3200: mm 8,100 (without cross conveyor +1,280 mm) Height approx. (at Z = 1,500 mm): mm 3,800 Width approx. (at Y = 1,200 mm): mm 5,000 (with spacer 4,500 mm) Weight: approx. kg 20,200 Connected load: approx. KVA 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE universal milling head Diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & through-spindle coolant RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced through a strict selection process and undergo thorough inspection (Deep-Dive Check). After intensive cleaning, any identified obvious defects and faults are professionally repaired by our qualified service team.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/1993, total length: 13,600 mm, total width: 2,500 mm, total height: 2,850 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,810 mm, color: red, Year of construction: 1993, General information Bodpfsy Hvlcsx Al Iswl Model code: ## Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: ROR Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 7.600 kg Carrying capacity: 31.400 kg GVW: 39.000 kg Functional Make of bodywork: Groenewegen Huifzeil / Plateau Maintenance APK (MOT): tested until 07/2026 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL