Used Bellow for sale (175)

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: KTR-Rotex, claw coupling type GS -Shaft: Ø 28/Ø 38 mm -Price: per piece -Number: 13 piece -Dimension: Ø 65 x 88 mm -Weight: 0.6 kg/piece Bledefzr Ufjpfx Al Isg

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: torsionally flexible claw coupling Bsdpfx Ajg A U Nvjl Iolg -Holes: Ø 22 mm / Ø 29 mm -Quantity: 1 piece available -Price: per piece -Dimensions: Ø 258 x 200 mm -Weight: 37.4 kg/piece

Condition: excellent (used), Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: Witzenmann, Hydra axial compensator unused -Type: ABG 01.0450.196.0 -Nominal diameter: DN 450 / Length 406 -Material: Bellows stainless steel -Bolt circle: Ø 575 / 22 mm Blodpfxjip Eq Ss Al Ieg -Number: 2x dampers available -Price: per piece -Dimensions: Ø 600 x 415 mm -Weight: 40 kg/piece

Condition: excellent (used), Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: SB Broneske, compensator unused -Type: SBF25.100 -Nominal diameter: Ø 270 mm -Material: Bellows stainless steel -Bolt circle: Ø 335 / 18 mm Bjdpsip Rb Rjfx Al Iolg -Dimensions: Ø 375 x 260 mm -Weight: 15 kg

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, flexible coupling, tire coupling, overrunning coupling -Manufacturer: Stieber, freewheels and backstops -Type: Stieber HD ETK 30 GL Z 08 -Hollow shaft: Ø 30 x 80 mm -Dimension: Ø 120 x 80 mm -Weight: 5.1 kg Blodpfx Aljfxbg Ae Ieg

Condition: good (used), metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: torsionally flexible claw coupling -Type: MMS 16 N1-1 .: 5-701320 Blsdpfx Alsuzn Drs Ieg -Bore: Ø 50 x 120 mm -Total dimensions: Ø 128 x 120 mm -Weight: 3.0 kg

Condition: excellent (used), Vibration damper, compensator, damper, expansion compensator, expansion joint, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: Witzenmann, Hydra Axial Compensator, unused -Type: ABG 01.0350.195.0 Blodpfx Alsip Eqns Ieg -Nominal diameter: DN 350 / Length 360 -Material: Bellows V4A stainless steel -Bolt circle: Ø 445 / 22 mm -Dimensions: Ø 490 x 365 mm -Weight: 27 kg

Condition: used, Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Width: 730 mm Bsdpfxsd Nkr Do Al Ijlg -Extendable to: 1600 mm -Number: 2x covers available -Price: complete for 2 pieces -Dimensions: 1600/730/165 mm -Weight: 34 kg/piece

Condition: used, Metal bellows coupling, claw coupling, connecting coupling -Shaft: Ø 20 mm -Price: per piece -Number: 4 pieces -Dimension: Ø 67 x 88 mm Blodpfxod Nbilo Al Ieg -Weight: 0.4 kg

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, rotary encoder coupling, encoder coupling -Manufacturer: Paguflex -Type: G30 (10 pieces available) Bodecqudbjpfx Al Islg -Outer diameter: 46 mm -Inside diameter: 12 mm -Price piece: 18 EUR net -Weight: 0.07 kg

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling Bsdpoflw A Djfx Al Ielg -Hollow shaft: Ø 40 mm -Dimension: Ø 130 x 80 mm -Weight: 5.5 kg

Condition: used, Slat aprons, samurai aprons, machine covers, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, guide cover -Lamellar apron: protective cover, 2 pieces -Extendable: max. Length 920 mm -Width: 380 mm -Price / fee: complete -Dimensions folded: 380/100 / H95 mm -Weight: 2 kg / pc. Bedpohf Dztjfx Al Islg

Condition: used, Air bellows, roller bellows, air cushions -Manufacturer: Goodyear -Part-Number: 1R11-700 566222709060000 Bsdpfeb A Tfxox Al Iolg -Weight: 7 kg

Year of construction: 2018, condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellow coupling, mechanical shrink disk Bljdpfxefzr Uuj Al Iog -Manufacturer: Stuwe, mechanical shrink disks -Type: HSD 62-22x62 -Shaft: Ø 62 mm -Price: per piece -Number: 33 piece -Dimension: Ø 110 x 35 mm -Weight: 1.3 kg/piece

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: Torsionally flexible claw coupling -Bohrung: Ø 10 mm Bodpfog A U N Sox Al Islg -Dimension: Ø 108 x 95 mm -Weight: 3.5 kg

Condition: used, Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Cover comes: from a WMW boring mill -for guide inside dimensions: 100 x 725 mm Bledpfx Aljdu U T To Iog -Extractable: mm -Dimensions: 950/820/H150 mm -Weight: 30 kg

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: Torsionally flexible claw coupling -Boret: Ø 20 mm -Dimension: Ø 176 x 140 mm Bedpjg A U Rdefx Al Ielg -Weight: 12,6 kg

Condition: used, Slat aprons, samurai aprons, machine covers, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, guide cover Bedpfxjcumgrj Al Islg -Bed width: max. 270 mm -Apron retracted: 410 mm -Apron extended: 1930 mm -Drawing with the pictures -Number: 2x aprons available -Price: per piece -Dimensions: 430/410/H175 mm -Weight: 26 kg

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Blsdpfexf Sn Iox Al Iog Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Offer and images subject to confirmation.

Condition: used, axle configuration: 3 axles, first registration: 09/2021, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Chassis, Light Version Aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm. Axles and Suspension: SAF-Intradisc light axle assemblies, 'off-road version', with 3 x 9 t disc brake axles (430 mm), SAF air suspension, centrally arranged to the chassis longitudinal members. 1st axle with liftable air bellows, starting aid and manual forced lowering. Smart Board Info Center, Hebert lowering valve, front load pressure gauge. Tyres and Wheels on Alloy Rims 6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims. Kingpin 2" screwed into an 8 mm thick 'light' plate. Bjdpfx Asyiw T Ejl Islg Landing Gear Support winches, load capacity 2 x 20 t, with swivel foot for air suspension. Braking System In accordance with E.G. standards, twin-line Wabco system, spring-actuated parking brake operating on two axles, with Wabco EBS-E including RSS (Roll Stability System), Wabco Smartboard Info Center, aluminium air reservoir system. Electrical System In compliance with StVZO guidelines, 3 round three-chamber lamps (Aspöck type), 24-volt system with 2x 7-pin and 1x 5-pin socket, 2x 7 side marker lamps, 2 central rear LED reverse lights, 1 round fog lamp, 4 LED work lights, 1 interior LED lamp, 4 red LED position lights in the door header. All air and electrical lines are neatly laid in plastic conduits. Tipper Body / Tipping Skip "Smooth Construction" Internal structure fully welded. Aluminium skip, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide and welded, floor plate 8 mm thick highly wear-resistant alloy (5383H34/HB 110) with 90-degree profile to side walls, front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors (1/2–1/2 configuration) and grain slide. Universal door operated automatically-pneumatically, separately lockable lever, rear frame in swing-out ALU design, two hold-downs with rubber buffers on the tipper skip fixed to the chassis at the front wall. Hydraulic System Tipping Cylinder with "Sheath" Suspension Hydraulic cylinder mounted on the front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose end 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete spray flaps across full vehicle width fixed to underrun protection, no spare wheel holder ALU, side underrun protection right side foldable, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing hoops in the centre approx. 150 mm elevated, additional central hoop support, roll tarp with central light strip and separate reinforcements in high wear areas, approx. 660 g/m² quality, tarp rolling system with quick tension closure, continuous rubber rope at rear edge with two tension hooks to be fastened to rear swing hoop, walkway on the chassis, rear tarp closure welded with rubber rope to prevent water ingress, robust folding underrun protection, 2 "Clear-Pass" spray flaps on mudguard (EG-compliant), aluminium grain funnel with sack fitted laterally to frame, holder for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding

Condition: used, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 46 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and Suspension Disc brakes 430 mm “off-road version” SAF-Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, air bellows centrally mounted to chassis longitudinal member 3rd axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, lift-lower valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70%, with silver steel rims, 11.75x22.5 ET 120, UNI wheel bolts King pin 2" - bolted into an 8 mm thick plate Landing gear Mechanical landing legs, 2 speeds, 2x20t support load, with swing foot for air suspension Brake system According to ECE regulations, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, aluminium air tank system Bjdpfx Ajyiw T Ssl Ijlg Electrical system According to StVZO guidelines with 2 five-chamber Aspöck type lights, 24V system with 2x7 and 1x15 pin socket, with side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly laid in plastic pipes Tipping body / Dump body “smooth construction” Fully welded inside Aluminium dump body, side walls with 30 mm thick plank profiles (2-3 mm) welded 600 mm wide, floor 6 mm thick, high wear-resistant alloy (5383H34/HB 110) with 45-degree bevel to side wall, front wall 4 mm reinforced, inclined design, rear wall designed as a universal door, straight design with 2 wing doors in 2/3–1/3 configuration and a grain chute, ALU round profile welded laterally and below to seal door gap on rear doors, rear doors partly clad with smooth aluminium. Universal door operated automatic-pneumatic, lockable with separate lever, aluminium rear brace pivotable, two hold-downs with rubber buffer on the dump body fixed to the frame at the front wall. Hydraulic system Tipping cylinder with "rotule" suspension (light) Hydraulic cylinder mounted on front wall with a working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and loose 1" half, tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap over the full vehicle width attached to underrun guard, no spare wheel holder, aluminium, foldable side underrun protection right side, large toolbox type 860, approx. 3 m aluminium ladder, 3 central aluminium swing bows raised approx. 150 mm, additionally a centrally mounted bow holder for positioning up to 2 bows to widen the loading width, roll tarpaulin with central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality with roll tarp system, continuous rubber cord at the rear closure of the tarp with two tension hooks to be fixed on the rear swing bow, catwalk on the frame in chassis colour with access left and right, tarpaulin closure to the side with quick-release fastener, rear tarp closure with welded rubber cord to prevent water ingress, robust foldable underrun protection in aluminium, 2 "Clear-Pass" spray flaps on mudguard according to EU standard, aluminium grain hopper fixed to the side of the frame with plan bag, holders for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,960 kg Offer and images subject to change.

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: 1307-62, total height: 1,600 mm, total length: 1,360 mm, total width: 610 mm, grinding wheel diameter: 175 mm, overall weight: 670 kg, grinding length: 500 mm, grinding spindle speed: 4,350 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 225 mm, travel distance Z-axis: 230 mm, grinding spindle motor power: 550 W, table length: 800 mm, table width: 165 mm, power: 0.55 kW (0.75 HP), disc diameter: 175 mm, Semi-automatic tool grinding machine with infinitely variable table drive. Machine inspected, grinding motor newly fitted with bearings. Grinding spindle of newer design without disturbing noises (repairable). Bellows in good condition, cross bellow new. Clamping surface undamaged. Electrical system inspected. For further details, see operating manual. Blsdoytq Abjpfx Al Isg

Condition: used, maximum load weight: 29,280 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 13,260 mm, loading space width: 2,480 mm, loading space height: 2,945 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, SCHWARZMÜLLER 3-axle SANH Mega Curtainsider with one-piece tail lift for forklift transport First registration 10/2024, in as-new condition Mileage only 7,937 km (trade fair/exhibition trailer) Permissible gross weight (technical): 39,000 kg Unladen weight: 9,720 kg Internal length: 13,600 mm Internal width: 2,480 mm Internal height: front 2,895 mm, rear 2,945 mm, height adjustable Coupling height: 960 to 1,050 mm Chassis with frame reinforcements for increased point load: 20 tons over 5 m Perforated outer frame 22 pairs of recessed lashing rings, 4 t 10 pairs of recessed lashing rings, 5 t Anti-slip screen-printed floor, 27 mm + additional 12 mm cross-laid birch plywood, forklift axle load capacity 7,200 kg, rear bolted steel durbar plate wear sheet 5/7 mm Reinforced aluminium front wall, 2,550 mm high, interior front wall protection in 9 mm screen-printed board Tarpaulin bar at front corner posts with ratchet tensioner, curtain openable and tensionable from the front Rear portal extendable, 490 mm per side 3 pairs of reinforced centre posts, 5 rows of slat pockets 4 rows of aluminium slats, 100 mm EDSCHA sliding roof with steel scissors, can be moved both forwards and backwards Hydraulic lift roof, hand operated on both sides, roof lift height 400 mm Sliding curtain, Code XL INFLATABLE AIR HOSE SYSTEM in trailer roof DHOLLANDIA tail lift, load capacity 9,000 kg Full-height steel platform, 2,950 mm Platform drivable up to 14,000 kg! Remote control operation Hydraulic rear support SAF axles, disc brakes IntradiscPlus Integral Axle spacing: 1,310 + 1,410 mm 1st axle: lift axle 3rd axle: trailing steering axle Tyres: 6 x 435/50 R 19.5 Goodyear WABCO trailer EBS with RSS anti-skid system Spring-actuated parking brake on 2 axles Bodpfx Alexcrq De Iolg Air suspension with lift and lower function, extra-long air bellows with total lift of 250 mm Axle load indicator via CAN bus Tire pressure monitoring Full LED lighting 2 x stainless steel toolboxes on left, 1,000 x 500 x 500 mm RENTING is the new BUYING – immediately available with us as a full-service rental!

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, spindle speed (max.): 18,000 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 100 mm, table load: 20 kg, The new price of the machine was EUR 39,875! TECHNICAL DETAILS Travel range Travel in X: 500 mm Travel in Y: 500 mm Travel in Z: 100 mm T-slot table X: 700 mm Y: 570 mm Maximum table load: 20 kg Spindle data HFS spindle power: 80 W HFS spindle speed: 18,000 rpm Movement Rapid traverse: 100 mm/s Repeatability: 0.01 mm Tool holder: 6 mm MACHINE DETAILS Electrical connection: 240 V Software: Signumeric EQUIPMENT Bellows covers Cable drag chains Jäger engraving spindle 42-2 W27 FS incl. frequency converter Bodpfx Alox Hfzmo Ielg Reinforced base frame Heat dissipation via spindle support 2 m cable outlet Quick-change holder for customer-supplied electric scriber

Condition: good (used), Air spring bellows, roller bellows, air cushion, air filter housing -Knecht combination air filter -Inlet/Outlet: Ø 57/60 mm Bodpjd Swrlefx Al Islg -Type: LVPO 045 S/9 -Price: per piece -Quantity: 1 piece -Dimensions: Ø 165/365 mm -Weight: 3.2 kg