Used Double Belt Press for sale (28,519)

Year of construction: 2025, condition: new, functionality: fully functional, With stainless steel square tube frame 15 pressing rollers 2 press nipps Electrical powerd with stepless speed regulation Belt width 1500mm High pressure belt cleaning integrated Nominal capacity up to 15.000 kg/h (depending on fruits & operating condition) Psdjclt Sbopfx Adlegk

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Heated Press – Double-column Press – 700 × 500 mm Heated Plates, Sliding Table The machine shown here was built to a customer’s order and has already been delivered. We can manufacture this machine for you at short notice – including consideration of individual options as required. This is a hydraulic heated press with electrically heated platens and a manual sliding table for pressing, laminating, and forming processes under elevated temperature conditions. Base price: €23,500 net Options (on request): The listed options are based on completed customer projects and enable targeted adaptation of the machine for the respective application. The base machine is a functional standard version – in practice, it is usually supplemented with additional equipment and configured specifically for the project. ==== Technical Data & Information: ==== General Information * Design: Double-column press * Pressing force: 30 t (adjustable) * Total weight: approx. 3,200 kg * Dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm ==== Working Area Psdpfxsy H Dtzo Adlogk * Table size: 700 × 500 mm * Heated plates: 700 × 500 × 65 mm * Installation height: max. 800 mm * Table traverse: 500 mm (manual) ==== Table & Ram * Ram stroke: 600 mm * Cylinder diameter: Ø 130 mm * Piston rod: Ø 80 mm * 8-fold guide for parallelism ==== Speeds * Working speed: 9 mm/s * Return speed: 25 mm/s ==== Hydraulics & Drive * Working pressure: max. 240 bar * Pump capacity: 12 l/min * Motor power: 3 kW * Hydraulic tank: 80 l * Pressure accuracy: ±5 bar * Hydraulic system with air cooling ==== Controls & Operation * SIEMENS S7-1200 controller with 7" touch panel * Programmable parameters (stroke, pressure, time, cycles) * Two-hand operation * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 25 kW (including heating) ==== Equipment * Electrically heated press plates up to 200 °C * Temperature monitoring with sensors * Passive pressure holding function up to 60 minutes * Hydraulic and electronic overload protection * Safety limit switches * CE certification * Two-layer coating according to RAL standard ===== Hot pressing, laminating, plastics processing, rubber and composite material processing, molding Heated press, hydraulic press, double-column press, thermal press, laminating press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully conform to the Brazilian national safety guideline NR 12, which is based on these standards. Our core strength is special machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulic components of our presses, we primarily use parts from leading European manufacturers.

Condition: used, Year of construction: 1950, pressure 500 t distance between columns 1600 mm stroke 60 mm max. ram stroke 60 1 / min ram adjustment 100 mm dayligth 700 mm Table area 1600x1400 mm ram surface 1400x1150 mm weight of the machine ca. 40 t Pedpfx Adoyutvyelogk The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine Podpfx Aeydi A Iedlegk -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Condition: used, Machines for Export from Liquidation Stock No. 62506 = Double Mitre Saw RAPID Type DGL 5000 / 500 = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 58052 = Eccentric Press MÜLLER GEFREES = Weight approx. 4,700 kg = Special price EUR 2,400 Stock No. 59408 = Eccentric Press Weingarten = Weight approx. 1,400 kg = Special price EUR 1,000 Stock No. 58984 = Eccentric Press Müller Gefrees = Weight approx. 1,400 kg = Special price EUR 1,000 Stock No. 58309 = Eccentric Press MÜLLER GEFREES = Weight approx. 1,000 kg = Special price EUR 1,000 Stock No. 60975 = Eccentric Press 16 tons (Year 2017) = Weight approx. 800 kg = Special price EUR 1,000 Stock No. 62267 (1) = Eccentric Press Weingarten 75 tons (Machine 1) = Weight approx. 4,800 kg Stock No. 62267 (2) = Eccentric Press Weingarten 75 tons (Machine 2) = Weight approx. 4,800 kg Stock No. 54183 = Hydraulic Press MÜLLER 10 tons, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Pgedpfxey Erzds Adljk Stock No. 57780 = Hydraulic Press MÜLLER Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic Press – Hydraulic power unit standing alongside = Weight approx. 3,000 kg Stock No. 60507 = WEBO Drilling Machine with 4 heads = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL Drilling Machine with 2 heads = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = Column Drilling Machine WEBO MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = Radial Drilling Machine WEBO Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines for immediate export available. For example: 10 units welding equipment CLOOS, ESS, etc. 2x CNC lathe HITACHI SEIKI

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Pgjdpfxsy H Ibvs Adlok Motor power: 3 kW

Condition: used, Year of construction: 1979, pressure 1000 t distance between columns 3030 mm stroke 350 mm Distance table/ram, max. stroke up, adjustment up 1400 mm table surface area 3000 x 2000 mm table height over floor 430 mm side window 1450 x 1400 mm ram surface 3000 x 2000 mm speed down 300 mm/s speed up 340 mm/s working speed 18 - 44 mm/s return capacity 120 t oil volume 4400 l width with platform 4950 mm power capacity 2 x 90,0 + 10,0 kW weight 87,0 t Dimensions (WxDxH) 4,35 x 3,65 x 7,55 m height over floor 6,05 m height beneath floor 1,5 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work stored in partly dismantled condition free loaded to truck Pjdjvuk I Ajpfx Adlogk

Year of construction: 1998, condition: ready for operation (used), A hydraulic double-column drawing press, which has only been used as a die tryout press, is available. Press force: 2500kN, stroke: 400mm, max. installation height: 600mm, table dimensions X/Y: 1250mm/800mm, column clearance: 1350mm, side passage: 640mm, table height: 800mm. Machine dimensions X/Y/Z: approx. 5700mm/3600mm/2800mm, weight: approx. 36000kg. The machine received a new screen, a hydraulic pump, a Sitema fall protection system, a press cylinder seal kit and an oil change in the last 12 years. Documentation available. An on-site inspection is possible. Pgjdpfx Adoy Hk S Relok

Condition: used, Year of construction: 1965, pressure 160 t stroke 15 - 170 mm no. of strokes 15 - 40 /min Pgedpfovuk S Uox Adlek distance between columns 2050 / 1900 mm dayligth (stroke and adjustment up) 690 mm column travel -side 800 mm table surface area 1600 x 800 mm table height over floor 900 mm ram surface 1620 x 700 mm ram adjustment 140 mm power requirement 15,0 kW Weight 24,0 t dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm total height over floor 4,8 m height under floor 0,5 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1979, pressure 60 t distance between columns 650 mm stroke 220 mm distance table/ram, max. stroke up, adjustment up 410 mm table surface area 600 x 525 mm pressure of drawing cushion in table 5 t stroke of drawing cushion in table 80 mm table height over floor 900 mm side window 200 mm ram surface 560 x 490 mm dimensions (WxDxH) 1,9 x 1,3 x 2,7 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick FGS 600), hydraulic drawing cushion in table, two-hand and foot operation No foundation pit necessary can be offered without or with putting into operation in given condition Pgodpfx Adjvuk Nmelok

Condition: used, Year of construction: 1980, pressure 50 t Pjdpjvuk Ngofx Adlegk distance between columns 1750 mm stroke 500 mm Distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1700 x 750 mm table height over floor 800 mm side window 650 x 750 mm ram surface 1700 x 750 mm power requirement 11,0 kW weight 11,0 t Dimensions (WxDxH) 2,1 x 1,15 x 3,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way No foundation pit necessary can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1983, pressure 160 t stroke fix 160 mm no. of strokes 30 - 120 /min distance between columns 1190 mm dayligth (stroke and adjustment up) 735 mm column travel -side 600 mm table surface area 1200 x 1000 mm hole in the table 500 x 300 mm table height over floor 900 mm ram surface 1000 x 800 mm ram adjustment 125 mm Pgsdpovuk E Uofx Adljk material width 550 mm material thickness 0 - 6,0 mm material cross-cut 1100 mm² feed length 350 mm power requirement 45,0 kW Weight 25,0 t dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, ram interlocking, centralized lubrication, mechanical pincer feed (Haulick, RS 350/550 SL 90) as is where is, WITHOUT putting into operation

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: AL-X20390, conveyor belt width: 1,500 mm, total width: 1,690 mm, overall weight: 68 kg, input voltage: 400 V, Equipment: type plate available, Air-cooled portable heating press for welding PVC/PU conveyor belts up to a width of 1500 mm and a thickness of 5 mm. Model GAMMA 1500 manufactured by FONMAR. Weight: 67.8 kg. Width: 1690 mm. 400V. The device is unused. Pgjdjydb Ucepfx Adlok

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Pedpsyz Dr Tefx Adlogk Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 250 t, table width: 1,000 mm, table length: 1,200 mm, die cushion stroke: 200 mm, The machine still needs to be built. Requirements can be considered where possible. Ejector in ram – approx. 10 t. Table draw cushion approx. 800 x 850 mm. Weight approx. 18 t. Stroke approx. 600 mm. Psdpfxjvga H Es Adljgk

Condition: used, Year of construction: 2019, Overview This belt press was manufactured in 2019 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  Capacity: 1,500 kg/h (apples) Application: Juice extraction from crushed apples Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems Pedpoyw Aa Ijfx Adlogk

Condition: good (used), Year of construction: 2004, KAISER Press KSTU 1600 - 15 - 3 PSR Pressing force 1,600 kN Stroke rate 20 - 260 1/min Pgjdpfx Adoy Ev Syelok Adjustable stroke 20-120 mm Ram adjustment 120 mm Installation height 400 mm Including strip feeding line

Condition: excellent (used), Year of construction: 2002, EXNER Press Pedpfey Erlpsx Adlegk EXSBZRD 500/100 Press force: 5,000 kN Tool dimensions: 1,800 x 1,200 mm Max. stroke length: 600 mm Working speed: 16/30 mm/s Rapid traverse speed: 400 mm/s Including feed and transfer unit

Condition: good (used), Year of construction: 1999, KAISER Press KSTU 3150 - 20 - 5 RK Press force: 3,150 kN Strokes per minute: 20-150 1/min Stroke adjustment: 20-180 mm Ram adjustment: 150 mm Table area: 2,000 x 1,250 mm Ram area: 2,000 x 1,000 mm Installation height: 600 mm FECKER strip feeding line Pjdsy El S Aepfx Adlsgk Strip width: 30-600 mm Strip thickness: 0.3-8.0 mm Max. coil weight: 8,000 kg

Condition: good (used), Year of construction: 2000, Kaiser Press KSTU 3500 - 25 - 6 P Press force 3,500 kN Stroke rate 20–100 1/min Stroke adjustment 40–250 mm Ram adjustment 200 mm Table area 2,500 x 1,250 mm Ram area 2,500 x 1,100 mm Installation height 700 mm Dreher strip feeding line Pgsdpfxsy El Iqo Adljk Strip width 30–600 mm Strip thickness 0.3–3.0 mm Max. coil weight 3,500 kg

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Pjdpfxevuuikj Adlsgk Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm Pedpsx Sr Evofx Adlogk dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm Psdpsyn R Elefx Adlegk die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydraulic weight of the machine ca. 280 t The machine was overtaken 1999.

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t Psdpfxsyn R Efs Adlogk stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm Psdpfxjyn R D Uo Adljgk die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydraulic weight of the machine ca. 280 t The machine was overtaken 1999.