Used Belt Linisher for sale (10,167)

Condition: new, Year of construction: 2025, Automatic sanding machine KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. structure unit Robust 3-belt sanding machine for the highest demands Constant working height thanks to top section adjustment Working width 1350 mm Passage height max. 205 mm (up to 18.5 kW main drive motor) Sanding belt dimensions for "R" and "Ed-L": 1350 x 2000 mm Sanding belt dimensions for "Xi-L": 150 x 4700 mm Unit "R" contact roller ➢ Grooved rubber contact roller hardness 80 Sh ➢ Contact roller level infinitely height-adjustable via touch screen ➢ Motorized lifting/lowering of the contact roller according to unit selection ➢ Increased sanding belt speed Unit "Ed-L" sanding pad diagonal ➢ Electronic sanding pad with segment width 22 mm (swiveling special version), with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Infinitely variable sanding belt speed (with PLC storage) ➢ Additional sanding pad insert "Xi-L" cross sanding unit in the machine frame Electronic sanding pad with segment width 22 mm with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Cross sanding belt supported by lamellar belt ➢ Infinitely variable sanding belt speed (with PLC storage) Perfect-3 1350-REdXi-LL - Main motors ➢ 1st unit: 18.5 kW (25 hp) / ➢ 2nd unit: 11 kW (15 hp) / ➢ 3rd unit: 16 kW (MPM) (22 hp) / 400 V/50 Hz 400 V/50 Hz 400 V/50 Hz - Workpiece feed ➢ Fabric-reinforced rubber transport carpet ➢ Rubberized carpet drive roller ➢ Motor: 2.2 kW (3 HP) / 400 V/50 Hz ➢ Speed: infinitely variable 3 - 15 m/min - Vacuum device ➢ On feed table ➢ Additional perforation of the transport carpet over 200 mm ➢ Vacuum generator: 2.2 kW (3 hp) / 400 V/50 Hz - Sanding belt cleaning ➢ Air blade for sanding belt cleaning of the two units "Ed-L" and "Xi-L" insert-controlled, with suction ducts and driven by blower 1.1 kW (1.5 HP) 400 V/50 Hz - Pressure elements ➢ Inlet: ➢ Intermediate units: ➢ Outlet: parallel spring-loaded, ground steel pressure roller ⌀ 50 mm rubberized pressure roller ⌀ 50 mm Rubberized pressure roller ⌀ 50 mm 1. grooved rubber contact roller, 80 sh. 2.diagonal sanding pad with lacquer finish and air blade for sanding belt cleaning 3.cross sanding unit with lacquer equipment and air blade for sanding belt cleaning Guodjr Hr Dzepfx Ag Njh Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz Additional equipment: W61: Structuring burr at the outlet B 10: Structuring brush Abralon, Mink W71: Additional quick-change shaft for brush 1350 B 12: Brass-plated steel wire brush 1350 C 10: LED package A 20: 5 x motorized regulating flaps (2x D=180 + 3 x D=150) Working width 1350 mm Max. passage 205 mm Sanding belt dimensions: 1350x2000 mm and 150x4700 mm 10" touch screen with Industry 4.0 control Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2014, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor with central drive -Type: 1100 -Speed: m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo nameplate -Belt width: 600 mm Gusdpfx Agoign Une Njh -Conveyor length: approx. 13800 mm / approx. 1000 mm height adjustable -Set-up dimension: 13880/970/H370 mm -Transport dimension: 4770/970/H1580 mm -Total weight: 478 kg

Condition: new, width of the strips 50.0 mm band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min tube diameter 16.0 - 114 mm Gedpfx Aoxaaxqog Neuh radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: excellent (used), REF: MM6212 1 X Large stainless-steel framed swan-neck elevator conveyor with flighted belt. Technical specification ⚙️ ✅ Belt width - 365mm. ✅ Infeed height - 550mm. ✅ Outfeed height - 2500mm. ✅ Overall dimensions - 4.3m long x 740mm wide x 2.6m high. Gusdoxd U Injpfx Ag Noh

Condition: used, total length: 2,500 mm, total width: 900 mm, total height: 2,000 mm, Type: Round trip accumulation table Dimensions: 250 x 90 x 200 cm Movement: round trip for continuous feeding Gjdpovlzlmjfx Ag Njuh Buffer table between two machines. Full casing

Condition: ready for operation (used), Dosing Belt Conveyor Ammann Guedjwkaw Rjpfx Ag Njh Brand: Ammann A-A length = 1700 mm. Beltwidth: 650 mm. Driving: 1,5 kW Gearbox On stock: 6 pieces.

Condition: new, Year of construction: 2025, Quick belt tension via lever Upper belt support with graphite coating Gusdpfx Agoff Hdbe Noh 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Clockwise and anti-clockwise rotation as standard The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4540 mm width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Suction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Drive motor power 3.3 / 4.5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right over the work table possible

Condition: used, Year of construction: 1981, functionality: fully functional, Braun profile belt sanding machine BP 700, Table tiltable up to 45°, Width 500 mm, depth 1260 mm, height 1040 mm, Sanding height 200 mm, cutting height 200 mm Sanding belt length 3020 mm Gujdpfow E Igpox Ag Neh Band saw blade length 3050 mm Working width 700 mm Three-phase motor 1.5 HP, 220/380 Volts Belt speed 18 m/s Mobile on base frame

Year of construction: 2009, condition: new, belt dimensions 2000x100mm Belt speed 30m/sec Angle adjustable from 30 to 90 Power 3kW 4000V50Hz Weight 200kg Rollers for grinding rye 3/4";1/2"; 1"; 11/4" Gusdsx Davepfx Ag Njh

Condition: excellent (used), REF: MM6213 1 X Large stainless-steel framed swan-neck elevator conveyor with flighted belt. Technical specification ⚙️ ✅ Belt width - 365mm. Gedpfx Aoxd Uywog Nsuh ✅ Infeed height - 550mm. ✅ Outfeed height - 2500mm. ✅Overall dimensions - 4.3m long x 740mm wide x 2.6m high.

Condition: used, Year of construction: 1995, total length: 650 mm, total width: 1,350 mm, total height: 1,900 mm, power: 1 kW (1.36 HP), Manufacturer: Ozaf srl Model: E 10 Year: 1995 Type: cleated conveyor belt / Giraffe conveyor. Power: 1.5 Kw Equipment: vibration system Dimensions: 65 x 135 x 190 cm Godpfx Aovlyy Nsg Nsuh Discharge height: 120 cm

Condition: ready for operation (used), Krupp Electro Magnetic Conveyor Belt, Heavy Duty Block : L= 1650 x W=1200 x H=600 mm Power Block = 7,7 kW Power Drummotor = 5,5 kW Beltwidth: 1400 mm, A-A = 3200 mm Speed = 2,5 m/sec. Gujdjxnnddjpfx Ag Noh Including rectifier (new) Weight appr. 7500 kg On stock 1 piece.  

Condition: new, Year of construction: 2025, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well Godpfx Aehk Df Djg Njuh One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: used, Belt sanding machine BÜRKLE BSU 2500/800 - used - Sanding belt cover, Extraction fan ----- Technical data ----- Table size: 2,500 x 800 mm, Motor: 5.5 kW, Sanding belt dimensions (LxW): 7,200 mm Gedpsxlt Ebefx Ag Neuh

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND with two belt speeds ideal for steel and stainless steel belt dimensions: 2000 x 150 mm belt speed: 18/ 37 m/sec Gsdepgmufopfx Ag Nouh power: 2,2/ 3,8 kW 400V/50Hz weight: 110 kg Tech. Data and dimensions: Errors excepted

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15/30 m/s total power requirement 3,0 kW weight of the machine ca. 159 kg dimensions of the machine ca. 768 x 1185 x 1417 mm Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead man's switch Station for flat grinding small workpieces Gedpfjt Hyqgjx Ag Nouh Low running costs

Condition: ready for operation (used), Permanent Magnetic Conveyor Belt (unused) Brand: LKoreman Block : L= 1200 x W=850 x H=300 mm Length frame A-A = 1900 mm Beltwidth: 800 mm Driving Gear Unit 1,5 kW Gedpfx Agoxnndqj Neuh Speed 1.6 m/sec  

Condition: as good as new (ex-display), Year of construction: 2025, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Gedpsgf Sw Nofx Ag Nsuh Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND Belt dimensions: 2000 x 75 mm belt speed: 18/ 37 m/sec power: 2,2/ 2,8 kW 400V/50Hz Godpfepgmtzex Ag Nouh weight: 90 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: ready for operation (used), Belt Conveyor LKOREMAN Brand: LKOREMAN Beltwidth: 500 mm *A-A length = 6000 mm Power : Gearbox 2 kW In stock: 1 piece *A-A length = 10000 mm Power : Drum motor 1,1 k Guodpfx Agsxnncte Nsh In stock: 1 piece

Condition: used, Dear Sir or Madam, Gusdjwhm Tgepfx Ag Njh We are offering a "Profilar" belt sander below. Price upon request

Condition: ready for operation (used), IFE Electro Magnetic Conveyor Belt brand: IFE Length frame A-A = 2300 mm Beltwidth: 800 mm This Magnet has 2 magnetic Blocks: *nr1= main magnetic block, type electro Dim. Block : L= 950 x W=900  x H=650  mm Power: 3,5 kW *nr2= auxiliary magnetic block, type permanent. Dim. Block : L= 550 x W=620  x H=190  mm Driving: 2 kW Gearbox Gjdexnnc Topfx Ag Nsuh Including rectifier.

Condition: ready for operation (used), Lot of Belt Conveyors, consisting of Nr1= Brand: LKOREMAN, year of manufacture 2010 A-A  length: 1000 mm, Beltwidth: 1000 mm Power : 0,2 kW Drum motor , Beltspeed: 0,4 m/s. Gujdpfxsxnndwj Ag Neh Nr2= Brand: LKOREMAN, year of manufacture 2001 Curve conveyor 20°, Beltwidth: 700 mm Power : 0,37 kW gearbox , Beltspeed: 0,2 m/s.

Condition: ready for operation (used), Belt Conveyor Brand: LKOREMAN Gjdpfx Aoxnncysg Neuh A-A  length = 7000 mm Beltwidth: 2000 mm Drive-Return Drum Ø 520 mm. Power : Stiebel Gearbox 18,5 kW Speed appr. 1,3 m/sec.

Condition: ready for operation (used), Belt Conveyor Metso Brand: Metso 2 piece on Stock: *1x A-A  length = 11.500 mm, Beltwidth: 1300 mm, Flat Version. Driving: 7,5 kW gearbox. *1x A-A  length = 20.000 mm, Beltwidth: 6500 mm. Driving: 7,5 kW gearbox. Gedpoxnnc Hofx Ag Neuh