Used Bending Rolls for sale (9,925)

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Fedpfx Aajzuzpysnjpp Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Fjdpfx Ajwk Rlxsanspp Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm total power requirement 3 kW Fpodpfx Aaoztfxijnop weight of the machine ca. 2 t

Condition: good (used), functionality: fully functional, Year of construction: 2010, control type: manual, actuation type: hydraulic, number of rollers: 3, sheet thickness (max.): 5 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 1,100 kg, Equipment: centralized greasing system, cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, Bending length: 1.050 mm Bendingcapacity: 5.0 mm Steel 3.0 mm Stainless steel Fpedoz Tdg Djpfx Aanjp 6.0 mm Aluminium Upper roll: Ø130 -> 75 mm Lower rolls: Ø130 mm Featured with: - Hydraulic drop end - 3-rolls driven - Hand-footcontrolled

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Fpodpfx Aeh U Rzgeanop Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. Fpedsz Ix Ukepfx Aanop • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: used, Year of construction: 2004, sheet width 1550 mm Fjdezxt Txspfx Aanjpp plate thickness 6 mm diameter of upper rolls 228 mm drive elektronisch zwei angetri

Condition: new, sheet thickness: 7bending length: 1600prebending: 5Upper Roll Diameter: 160Bottom Roll Diameter: 140Side Roll: 120motor: 4messurements (LxWxH): 3650 x 1140 x 1040weight approx.: 2100 MACHINE EQUIPMENT 1. Separate, movable control panel 2. Digital readout for side roll positioning 3. Machine body made of welded steel construction (St-52) 4. Cone bending device 5. All rolls are mounted in bearings 6. Cone rolling and positioning control from the control panel Fodped Ab Skefx Aanepp 7. Induction-hardened rolls 8. Top and pinch rolls driven by hydraulic motors and planetary gear reducers 9. CE marking and certifications according to ISO 9001:2015, TSEK and TURQUM OPTIONAL ACCESSORIES 1. Infinitely variable rotation speed 2. Side and central supports for large diameters 3. Material feeding table 4. Material ejector 5. Interchangeable top roll 6. Oil cooling system 7. CNC control 8. NC control

Condition: used, sheet width 3000 mm plate thickness 6 mm pre-bending 4 roll diameter 205 mm total power requirement 5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 4,0 x 1,4 x 1, 5 m Roundo 3-roll plate bending machine, featuring: Fjdpfx Aj Ahkinsanepp - Hydraulic drop-end bearing and remote control - Conical bending attachment: a device for rolling cones and funnels.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, actuation type: electric, roller diameter: 90 mm, working width: 1,270 mm, sheet thickness (max.): 3 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), input voltage: 400 V, rotational speed (max.): 6 rpm, type of input current: three-phase, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, sheet metal roll bending machine BOLUK BM 1270 x 90 - 2.5 mm NEW! for sale. manufacturer: BOLUK 1270X90mm year of manufacture: 2024 Bending Length: 1270 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Manually adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device - Manually foldable end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 1850x700x1200 mm Fpedjxhub Aspfx Aanop Weight 520 kg

Condition: new, sheet length: 2600sheet thickness: 8prebending: 6Upper Roll Diameter: 210Bottom Roll Diameter: 190Side Roll: 170motor: 7,5messurements (LxWxH): 4900 x 1300 x 1390weight approx.: 4800 MACHINE EQUIPMENT 1. Separate, movable control panel 2. Digital readout for side roll positioning 3. Machine body made of welded steel construction (St-52) 4. Cone bending device 5. All rolls are mounted in bearings 6. Cone rolling and positioning control from the control panel 7. Induction-hardened rolls 8. Top and pinch rolls driven by hydraulic motors and planetary gear reducers 9. CE marking and certifications according to ISO 9001:2015, TSEK and TURQUM OPTIONAL ACCESSORIES 1. Infinitely variable rotation speed 2. Side and central supports for large diameters 3. Material feeding table 4. Material ejector Fpoded Ab Sfopfx Aanjp 5. Interchangeable top roll 6. Oil cooling system 7. CNC control 8. NC control

Condition: new, sheet length: 2600sheet thickness: 6prebending: 4Upper Roll Diameter: 190Bottom Roll Diameter: 170Side Roll: 150motor: 4messurements (LxWxH): 4545 x 1380 x 1255weight approx.: 3600 MACHINE EQUIPMENT 1. Separate, movable control panel 2. Digital readout for side roll positioning 3. Machine body made of welded steel construction (St-52) 4. Cone bending device 5. All rolls are mounted in bearings 6. Cone rolling and positioning control from the control panel 7. Induction-hardened rolls 8. Top and pinch rolls driven by hydraulic motors and planetary gear reducers 9. CE marking and certifications according to ISO 9001:2015, TSEK and TURQUM OPTIONAL ACCESSORIES 1. Infinitely variable rotation speed 2. Side and central supports for large diameters 3. Material feeding table 4. Material ejector Fjdpfx Aod Ab Sheanopp 5. Interchangeable top roll 6. Oil cooling system 7. CNC control 8. NC control

Condition: used, Machine type : Motorized bending roll Manufacturer : Bradbury Control unit : MCE (industrial electrical control panel) Fpodpfx Aew Dd Iyoansp Supply voltage : 380 V Phase : 3 Frequency : 50 Hz FLA (Full Load Amperage) : 17.6 A Main motor FLA : 15 A Disconnect short-circuit rating : 200,000 A Internal short-circuit rating : 65,000 A Electrical diagram no. : ED3033 Electrical serial no. : B014541 Machine Application The Bradbury bending roll is used for rolling and forming sheet metal into precise cylinders, cones, or arcs. It is employed in the production of ducts, tanks, tubes, or metal shells, and can be integrated into profiling or cutting lines. Features / Differences – Dedicated MCE control panel, with high-capacity electrical protection (200,000 A). – Main motor rated at 15 A, operating on standard industrial 3-phase power. – Full electrical documentation under reference ED3033 for operation and maintenance. – Compatible for integration within Bradbury automated coil processing lines.

Condition: good (used), Year of construction: 1995, control type: CNC control, actuation type: hydraulic, controller manufacturer: PSG 2000 ULTRA, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 310 mm, side roll diameter: 270 mm, sheet thickness (max.): 16 mm, overall weight: 16,000 kg, total length: 7,000 mm, total width: 2,100 mm, total height: 5,600 mm, Make: FACCIN Type: 4HEL 16/13 Control: PSG 2000 ULTRA Fodpfs Ai Dcajx Aanspp YOP: 1995 PSG Ultra Controller for Eclipse and Teachin Cycle operations TOP Support motorized adjustable arm length ..... mm SIDE Support hydraulic swivable  Central lubrication Conical bending device Fully hydraulic machine Rolling width: 4000mm Rolling thickness 3x toproll Ø:16mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 13mm Top Roll Ø: 310mm Bottom Roll Ø: 280mm Side roll Ø: 270mm Number of rolls: 4 Rolling speed: 0 - 5 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 200mm/min. Control: PSG Faccin Top support: Yes Side supports: Yes Length: 7000mm Width: 2100mm Height: 5600mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, sheet thickness: 25sheet length: 2600prebending: 20Upper Roll Diameter: 360Bottom Roll Diameter: 330Side Roll: 250motor: 18,5messurements (LxWxH): 5045 x 1900 x 1680weight approx.: 10780 Machine Features: - Separate, movable control panel - Digital position display for the side rolls - Fully welded steel machine frame (St-52) - Cone bending attachment - Bearing-supported rolls - Cone bending and position adjustment via the control panel - Induction-hardened rolls - Top and bottom (central) rolls driven by hydraulic motors and planetary gear reducers - Certifications: CE, ISO 9001:2015, TSEK and TURQUM Optional Accessories (upon request): - Infinitely variable rotation speed - Side and central supports for large diameters - Material feeding table - Material ejector - Interchangeable top roll - Oil cooling system Fjdpfx Aaed Ab Rwjnjpp - CNC control - NC control

Condition: used, sheet thickness: 2messurements (LxWxH): 170 x 55 x 110sheet length: 1050weight approx.: 300Upper Roll Diameter: 75 3-Roll Plate Bending Machine Fjdpfxo Agdage Aanepp Dimensions (L × W × H): approx. 170 × 55 × 110 cm Working width: approx. 1050 mm

Condition: used, Offered for sale is a hydraulic three-roll plate bending machine. Pre-bending capacity X/Y: 3000mm/15mm. Bending width: 3000mm. Reference material: Steel. Tensile strength of the reference material: 45-47kp/mm². Yield strength of the reference material: 25-27kp/mm². Equipped with hydraulically adjustable bottom rolls, hydraulic drop-end, plate support with vertical guide mast and support arm, and machine-mounted push-button control panel. Inspection possible by arrangement. Fedpfx Ae Ad Nrleanjpp

Condition: new, Rollmak 3-roll round bending machine SM 90-10/3.3 Technical specifications: Sheet width 1050 mm Sheet thickness 3.3 mm max. sheet thickness 3.0 mm Roll length 1050 mm roller diameter 90 mm smallest bending diameter 130 mm Weight 440 kg Dimension L-W-H 1650 x 700 x 1160 mm Motor:1,1 KW Equipment: Top and bottom roller electrically driven Swing-out top roller Rear roller infeed with handwheel Conical bending device Fjdpfetzll Esx Aanepp Asymmetrical roller arrangement Self-braking main motor Separate control panel safety line Values apply to St-37 / 240 N/mm² CE mark

Condition: new, Rollmak 3-Roll Round Bending Machine SM 90-10/3.3 Special equipment included in the price: Fsdpfx Aaslu Emxjnopp hardened rollers motorized rear roller adjustment digital display Sheet metal width 1050 mm Sheet metal thickness 3.3 mm max. Sheet metal thickness 3.0 mm for pre-bending Roller length 1050 mm Roller diameter 90 mm Smallest bending diameter 130 mm Weight 465 kg Dimensions L-W-H 1650 x 700 x 1160 mm Motor: 1.1 kW Equipment: Top and bottom rollers electrically driven Top roller can be pivoted outwards Taper bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel Safety cord Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Rollmak 3-Roll Round Bending Machine SM 90-12/3.0 Fsdpfx Aolu Enrsanjpp Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 1250 mm Sheet metal thickness 3.0 mm max. Sheet metal thickness for pre-bending 2.5 mm Roller length 1250 mm Roller diameter 90 mm Smallest bending diameter 130 mm Weight 500 kg Dimensions L-W-H 1850 x 700 x 1200 mm Motor: 1.1 KW Equipment: Top and bottom roller, electrically driven Top roller can be swung out Taper bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm -Roller diameter: 55 mm Fjdpfxjz A S Sre Aanjpp -Dimensions: 1670/580/H1150 mm -Weight: 156 kg

Condition: used, Offered for sale is a hydraulic three-roll plate bending machine. Bending width: 3000mm. Pre-bending capacity: 31mm at 3000mm plate width. Reference material: Steel with yield strength of 240N/mm². Pre-bending diameter at specified capacity: greater than 630mm. Control system: Separate control panel with joystick control for roll and support adjustment. Equipped with hydraulically adjustable bottom rolls, overhead plate support, side plate support and hydraulically operated drop-end bearing. Inspection possible by arrangement. Fedpfxs Ad Nq Uo Aanepp

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired Fpsdpfjz Dxpmox Aansp (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: used, Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine -Spare part top roller -Drawing with the pictures -Max. Sheet width: 2060 mm -Max. Sheet thickness: mm -Roller diameter: 141 mm Fpjdpfocx T E Rsx Aanop -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg

Condition: as good as new (ex-display), Year of construction: 2022, 1550 mm 2,0 mm 1,5 mm roll diameter oben 90 mm 560 kg 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device Fjdpfxexcuxds Aanopp - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment