Used Horizontal Bending Press for sale (33,749)

Condition: as good as new (ex-display), Year of construction: 2025, Horizontal Bending press Zopf - model T 100 - year of construction 2025 - demo model - length of stroke 200 mm - weight 320 kg Bending capacity flat material mild steel 150x10 (with special tooling) Podpfsdibygox Adiord with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke demo model

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW Psdpfx Ajgvkmrodierd dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: as good as new (ex-display), Year of construction: 2024, Horizontal Bending press Zopf - model T 200 with automatic backgauge - programable backgauge 900 mm with - year of construction 2023 - demo model - length of stroke 185 mm - weight 500 kg Pedpfx Ajgrydbodierd Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 100 mm Touch screen with programming of the stroke and backgauge demo model

Condition: new, Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 800 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 80 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. Psdpfxod A Nc Do Adiord - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg - bending capacity: flat material max. 300x32 mm at Vmax round tube 3/8" - 3" gas pipe

Condition: new, Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 1000 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 100 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. Predpfx Adsxpf R Djied - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg - bending capacity: flat material max. 300x34 mm at Vmax round tube 3/8" - 3" gas pipe

Condition: new, Year of construction: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - hydraulic pressure 40 to. Pedpfxsqvm Uko Adijrd - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x22 mm round tube up to 60 mm

Condition: new, Year of construction: 2023, Horizontal bending machine AH 20 with backgauge Predewyt Tqjpfx Adiod - ZOPF - with semi-automatic control - hydraulic pressure 20 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 2,2 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x12 mm round tube up to 48 mm

Condition: as good as new (ex-display), Year of construction: 2025, Horizontal bending machine T 400 Multi - ZOPF - with semi-automatic control - (99 bending programs each 16 steps) - hydraulic pressure 40 to. - length of stroke 250 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. Prsdpfjfiqlfox Adiod - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 200x22 mm round tube up to 65 mm

Condition: as good as new (ex-display), Year of construction: 2024, Horizontal Bending press Zopf - model T 200 - year of construction 2024 - demo model - length of stroke 185 mm - weight 450 kg Psdsdy Igzepfx Adierd Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke demo model

Condition: used, Year of construction: 1985, Offer 25995 Technical Data: - Pressing force 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm - Max. installation depth with straightening bar 1050 mm - Max. installation depth without straightening bar 1400 mm - Stroke speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW Prsdpfxewp Eguo Adiod - Space requirement approx. B 3600 x H 1400 x T 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening bar 1300 x 400 mm with over - Threaded spindle, laterally adjustable supports

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Control: Conventional - Motor power: 1.5kW - Capacity: 50mm - Model: fielbuiger - Shaft diameter: 155mm - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Podpfx Aoxixrhsdierd Lukas van Rossum

Condition: new, functionality: fully functional, Year of construction: 2025, bending force (max.): 1,000 t, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, overall weight: 8,000 kg, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, bending angle (max.): 90 °, table length: 3,200 mm, working height: 450 mm, All-Electric Servo Bending Machine Prjdpfov Hchlex Adisd Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: used, Year of construction: 2025, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Empty weight: 800 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Control: Teach-in - Motor power: 4.0kW - Table width: 550mm - Table length: 300mm - Model: Hydraulic - Max. stroke: 180mm - Power: 28.0ton Prjdoxixruepfx Adied - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm Prodpfsfxygwex Adiod pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: new, Year of construction: 2025, pressing force: 20 t, – Capacity 20 tons – Bending capacity 200 x 12 mm Pedpfx Ajvt Eunjdijrd – Stroke 200 mm – NC touchscreen control – Foot control – Emergency stop – 400V

Condition: good (used), Profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press -Bending/straightening press: hydraulic profile bending machine Predpjt Hmhlofx Adijd -Base: solid construction, mobile -Hydraulic unit: unfortunately without type designation -Piston rod: Ø 55 mm / stroke: 200 mm -Individual components: see photos -Total dimensions: 1180/1060/H1000 mm -Weight: 445 kg

Condition: new, Year of construction: 2025, overall weight: 1,000 kg, Horizontal bending machine T 300 Multi new version - ZOPF - with semi-automatic control - (99 bending programs each 16 steps) - hydraulic pressure 30 to. - length of stroke 250 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. Pedpfxswqftdj Adijrd - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 200x20 mm round tube 3/8" - 2"

Condition: new, Horizontal Bending Machine Fastech FP 30 Description • Pressure: 30t • Stroke: 285mm • Max. tool height: 250mm Prodpfxefg Eu Uo Adied • Flat bar on the tall edge: 200 x 18mm • Working speed: 10.0mm/sec • Return speed: 10.0mm/sec • Working height: 930mm • Table: 660 x 1250mm • Total power requirement: 3.0kW • Motor: 400 Volt 50Hz • Weight: 850kg • Dimensions (L-W-H): 1250 x 650 x 1250mm • Oil capacity: 40.0l Equipment: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made from hardened and ground forged steel • Digital stroke adjustment display • 1x tool set • Double foot switch

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Podpfx Ajxpqy Dsdierd Weight 5,000 kg Good condition

Condition: new, pressure: 100Oil tank capacity: 120Bending capacity: (Flaches Material) 320 x 24Bending capacity: (Runde Rohre) 114 x 10pressure: 285working speed: 10Return speed: 10motor: 10table area: 750 x 1425working height: 930length: 1430width: 750heigth: 1450weight approx.: 1700stroke: 285 UZMA hydraulic horizontal presses with multi-directional feature, Psdpfx Adjr I H Axeierd pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: new, pressure: 22stroke: 200table diamension: 625 x 1.100total power requirements: 2,2weight approx.: 0,635messurements (LxWxH): 1,100x0,630x0,925 Podpfx Adsd Ab Ibeiord

Condition: new, Oil tank capacity: 12Bending capacity: (Flaches Material) 200 x 12Bending capacity: (Runde Rohre) 48 x 4,0pressure: 20working speed: 10Return speed: 10motor: 2.2table area: 480 x 1060working height: 930length: 1150width: 480heigth: 1200stroke: 185weight approx.: 530 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. Prjdjr I H A Aspfx Adisd With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: new, Oil tank capacity: 40Bending capacity: (Flaches Material) 200 x 18Bending capacity: (Runde Rohre) 60 x 4,0pressure: 30working speed: 10Return speed: 10motor: 3table area: 660 x 1250working height: 930length: 1250width: 650heigth: 1250stroke: 285weight approx.: 1050 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. Psdpfx Asr I H A Hediord With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: new, Oil tank capacity: 40Bending capacity: (Flaches Material) 200 x 18Bending capacity: (Runde Rohre) 60 x 4,0pressure: 40working speed: 10Return speed: 10motor: 3table area: 660 x 1250working height: 930length: 1250width: 650heigth: 1250stroke: 285 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Psdpfjr I H A Rex Adierd Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: new, Oil tank capacity: 60Bending capacity: (Flaches Material) 300x15Bending capacity: (Runde Rohre) 76x4,0pressure: 50working speed: 10Return speed: 10motor: 5.5table area: 600 x 1250working height: 930length: 1400width: 600heigth: 1500stroke: 285weight approx.: 1050 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. Pedjr I H A Uspfx Adisrd With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling