Used Bevelling for sale (567)

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Kdodjcr S Ecspfx Ag Usn Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Kdedjvutw Hspfx Ag Uon Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2026, Robust design also allows the machining of longer workpieces Sanding unit swivels, therefore also usable as edge sanding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the grinding belt High belt speed of 17 m/s Right-left rotation Upper grinding sole with graphite coating grinding shoe 4-fold spring mounted With movable grinding shoe for bevelled surfaces Kdjdpfx Aoff Hdfsg Ujn Smooth-running grinding table even with high loads from heavy workpieces Optimal price-performance ratio Additional equipment ESE Electrical table height adjustment as standard Divided table to fold up for special edge grinding Drawer sanding device Integrated worktable lighting Equipment details 225 mm large balanced belt rollers ensure optimum and low-vibration drive belt speed 17 m/s With swivel-mounted professional sanding shoe for bevelled surfaces 4-fold spring suspension Electrical table height adjustment as standard Operating elements ergonomically arranged on separate control panel With drawer sanding device as standard Divided table to fold up for special edge grinding applications Dimensions and weights Length approx. 3750 mm width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection Suction nozzle diameter 160 / 160 mm Work table(s) Work table height adjustment 550 mm Work table transverse stroke 690 mm Electrical data Power Höh

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: Ksdpfx Agopq If De Uodn T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW Kdjdpepgkmwjfx Ag Ujn fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Edge sanding machine with overhead feed unit What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table with rubberized feed belt and overhead pressure beam. It significantly facilitates the grinding and production of beveled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it is also an aid when machining exceptionally large or small parts. The feed speed is infinitely variable between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the top pressure beam gently convey the material. A second bottom conveyor belt is available as an option. The top pressure rollers can also be replaced by a rubber belt, which helps especially when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all processing - from solid wood to fine veneer edges in high quality. The infinitely variable feed speed allows optimum adaptation to the material. 1st sanding station: "veneer side Kodpfx Agshqb Rcs Usdn 2nd sanding station: "solid wood side 3rd sanding station: "Additional table 4th sanding station: "Semi-circular table Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock K 36 Top equipment with motorized adjustment - Exhibition piece - New machine - - immediately available - This Hebrock endurance racer offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily use. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock is setting new standards in the field of perfect edge processing of various edge thicknesses. max. edge thickness: 3 mm max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 60 mm Min. workpiece length approx. 140 mm Feed speed approx. 15 m/min. Ready for operation approx. 6 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Equipment: Hebrock K 36 - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touch screen), hot melt adhesive application to the workpiece workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 3 mm routing depth, maintenance-free, coated glue tray with HF double-motor cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with pneumatic trimming adjustment and interchangeable panel trimmer (combi version), corner rounding trimmer, radius scraper, surface scraper (incl. cleaning station, robust chain drive, ball-bearing mounted double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m. support, feed rate approx. 15 m/min, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change equipment for corner router 36/08/2/1 additional exchangeable motor corner router R=1 36/09/1 Multi-radius scraper 36/24/1 Release agent spraying device 36/24/2 Cleaning agent spraying device 36/25 Protective spraying edge Kdedei Am Ukspfx Ag Ujn 36/27 Nesting (1x milling station + 1 x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/bevel) 36/45 Axis package Motorized adjustment of panel, edge thickness and joint milling depth jointing depth adjustment Location: ex stock 54634 Bitburg - immediately available -

Condition: new, empty load weight: 2,850 kg, maximum load weight: 7,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Each ramp approx. 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 10 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel side walls, foldable and removable, wood planks 50 mm, loading surface at rear beveled, inside loading width 2,480 mm, rear stanchion removable, front open for through-loading, Also available with a loading length of 6,300 mm!!, Rental price from 500 ¤, -- Printing errors, mistakes, and changes reserved, sample pictures --, More data at: !, More details: ! Kjdpfszc Uy Aox Ag Uedn

Condition: new, empty load weight: 3,050 kg, maximum load weight: 9,950 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 900 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Kodpozc Uzgofx Ag Usdn

Condition: used, mileage: 419,200 km, power: 175 kW (237.93 HP), first registration: 06/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 3,780 mm, Year of construction: 2013, Equipment: air conditioning, parking heater, tail-lift, * Mercedes Benz 1824 L AXOR with multi-chamber refrigerated box body, Carrier Supra 950 - BÄR LBW 2. * Diesel - Engine displacement: 6,374 cc³ - 175 kW / 240 hp - Euro 5 - Green emissions sticker - * Body dimensions: Length 7,200 mm x Width 2,600 mm x Height xxxx m - Wheelbase: 4,900 mm - * 2 seats - Automatic transmission - Air conditioning - Suspension: leaf spring / air - Trailer hitch - Wheel formula: 4x2 * Retarder - Permissible total weight: 18,000 kg - Unladen weight: 10,550 kg - Payload: 7,450 kg - * Truck 1: 1824 L - Registration date - Mileage: 400,500 - VIN: WDB 9505361L652633 * Truck 2: 1824 L - Registration date - Mileage: 513,750 - VIN: WDB 9505361L752647 * Truck 3: 1824 L - Registration date - Mileage: 422,750 - VIN: WDB 9505361L756551 * Truck 4: 1824 L - Registration date - Mileage: 419,250 - VIN: WDB 9505361B980262 Kdsdpfx Ajzd Irasg Usn * Vehicles are immediately available and ready for pick-up - Vehicles are not labeled - * Please schedule an appointment for viewing - Price is per vehicle - * Contact person: Mr. Andreas Vogel * The information provided on the internet is a non-binding description. * It does not constitute guaranteed characteristics. * The seller is not liable for typing or data transmission errors. * Subject to changes, errors and prior sale. Special equipment: Wheel bolt cover, storage compartment on engine tunnel, trailer coupling: towing hitch, audio system: CD radio, battery 220 Ah, compressed air tank aluminum, cab: comfort suspension (1.8 Hz), cab variant: S (short with extended rear wall), generator 100 A, graphic information display with economy meter, rear lights for mounting a tail lift, air dryer 1 chamber heated, spare wheel jack on the side, switch for tail lift, circuit breaker, seats in the cab: driver's seat comfort suspension seat incl. horizontal suspension, voltage converter 24V / 12V 15 A, steel rims 9.00x22.5, 12-volt socket, cab socket 24V, front underrun protection, preparation for cool box / refrigerator, preparation for telephone / fax, front axle inclined, thermal protection glazing, auxiliary heater (air) Additional equipment: Emission standard EURO 5, axle configuration: 4x2, front axle load 7.5 t, exterior mirrors electrically adjustable and heated, exterior mirror electrically adjustable, left, outside temperature display, long-haul cab, sunroof (steel), differential lock rear axle, cab: S (short), suspension: leaf spring / air, electric windows, gearbox 6-speed - Type: G 85-6, urea tank (AdBlue): 95 liters, rear axle H 6, bevel gear 440, interior filter: pollen filter, body/superstructure: chassis, fuel tank: 210 liters plastic, model update Axor 2, engine 6.4 liters - 175 kW diesel (OM 906 LA), engine start/stop system, engine brake with constant throttle, spare wheel under frame end, disc brakes, seats in the cab: passenger single seat, fixed, stabilizer rear axle, stabilizer front axle, Telligent braking system with ABS+ASR, fixed rear underrun protection, immobilizer, permissible total weight 18.00 t.

Condition: good (used), Gearbox, bevel gear, worm gear -Gearbox: Ratio: i = 1:1 -Shafts: Ø 8 x 17 mm -Rotation direction: see photos -Dimensions: 98/97/33 mm -Weight: 0.3 kg Kedpjt Snwrsfx Ag Uodn

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ksdpfxezc Eqfj Ag Usdn

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min Kedpfx Ajzaan Teg Uodn rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,700 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 400 mm side walls, steel side walls HOT-DIP GALVANIZED, with central stake on the side, plug-in, chassis: hot-dip galvanized, wooden floor, 14 lashing eyes in the outer frame, bevelled at the rear, 2 x ramps each 3,000 mm long x 725 mm wide, ramps with spring lifting mechanism, ramps with gratings also available in wood!, Loading height: 880 mm, , Also available in loading area length 7.20 m, available for immediate delivery., , Rental price from 580 euros, , --  Subject to printing errors, mistakes and changes, Sample images --, More data at: !, More details: ! Kodpfx Ajzcvz Ieg Usdn

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2026, total width: 2,480 mm, Equipment: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick loading surface, hydraulically liftable and lowerable loading area behind the gooseneck, approx. 2,800 mm long, with rear bevel approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm) over the axles, checker plate covering Two-part steel ramps: * One pair galvanized two-part steel ramps, reinforced design, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 8 t on an area of appr. 20 x 20 cm) * Ramps with hydraulically extendable and retractable sections and hydraulic lifting device, maximum load per pair: 40,000 kg * In accordance with regulation 1230/2012/EU, ramps with a length less than 300 mm in driving position do not have to be included in the total vehicle length of 16,500 mm Landing gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 rigid axles, 1 self-steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Colors: * Trailer in RAL 3002 carmine red * Rims silver * Tarp in RAL 9006 silver Including accessories: * 1 spare wheel carrier under the loading area, right-hand side in direction of travel * 2-inch kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holders on the front wall * 3 levels of wooden slats * Galvanized folding supports under the rear slope of the loading platform * Adjustable curtain body height approx. 3,960 mm * Galvanized front wall with tension mechanism for sliding curtains * Roof from EDSCHA, adjustable in height by approx. 400 mm, can be slid forward on aluminum roof beam profiles (bolted to front and rear wall) Kjdpfx Agey Nu Hkj Uodn * 3 pairs of sliding stakes in the loading area * Body hydraulically extendable by approx. 750 mm left and right at the rear * Sliding tarp with approx. 700 mm length reserve, tension straps at approx. 600 mm intervals in height * Top edge of body approx. 3,960 mm (laden) * Driving with open sliding roof is not permitted and will damage the tarp * A painted sand layer as anti-slip coating on the gooseneck and loading area checker plates * Cover plates to bridge the gap between ramps and loading area * Electro-hydraulic unit at the rear under the loading area * Mountings for warning boards, including socket, on the left and right of the gooseneck and ramps * Ramp control valves installed on the right side of the trailer * Grating in the gooseneck slope C30/3 (point load approx. 2 t on an area of 20 x 20 cm) * Grating in the slope of the load f

Condition: reconditioned (used), machine/vehicle number: 05640, functionality: fully functional, power: 2.3 kW (3.13 HP), input voltage: 230 V, input current: 12 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 130 mm, tilt adjustment saw blade: 60 °, height adjustment type: mechanical, saw blade bore: 30 mm, rotational speed (max.): 2,200 rpm, overall weight: 16 kg, Equipment: saw blade guard, Used circular saw for carpentry, FESTO AXP 132 E Technical data: Kdsdpfszc Edlex Ag Usn Power consumption 2,300 W Speed 2,200 rpm Bevel adjustment for sawing 0-60° Bevel adjustment for routing 0-45° Cutting depth at 90° 50-132 mm Cutting depth at 45° 90 mm Cutting depth at 60° 60 mm Weight 16 kg The circular saw currently has a grooving cutter head installed (160x80x30 mm). For reverting to a standard circular saw, the protective cover and clamping flange are included (not visible in the pictures). A saw blade is not included. The machine has been workshop-tested and is fully functional. You will receive an invoice with VAT shown. Payment is made by prepayment (bank transfer) - No PayPal! Collection from the store is, of course, also possible. Shipping is via UPS. Shipping costs within Germany: €11.90. If you have any questions, please do not hesitate to contact us.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Kedpfjzcmvpox Ag Uodn

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source model: Max Photonics, laser power: 12,000 W, laser wavelength: 1,063 nm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, pipe diameter (max.): 550 mm, pipe length (max.): 120,000 mm, table length: 120,000 mm, working length: 120,000 mm, The machine is located in Espelkamp and is available immediately. It is manufactured and designed by one of the best manufacturers of tube laser systems. The diameter of the materials that can be processed is 550 mm, or it can handle I-beams, angle iron, rectangular or square tubes, and other materials with an edge length of 550 mm. The system operates with extreme precision and speed. With it, entire steel halls can be cut and beveled with the corresponding 45-degree head in a very short time. Kdodpfx Agozcqm Sj Ujn This turns every steel structure into a kind of Lego set. No more manual cutting, measuring, and nesting. The accompanying software ensures exact and efficient nesting of the components, minimizing material waste. The price includes installation, training, and software.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Kodpfxjzb Diqj Ag Usdn

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 392 kg, total width: 1,500 mm, total length: 4,000 mm, cutting height (max.): 250 mm, type of input current: three-phase, space requirement length: 4,000 mm, space requirement width: 1,500 mm, rotational speed (max.): 6,670 rpm, rotational speed (min.): 6,670 rpm, spindle speed (min.): 6,670 rpm, spindle speed (max.): 6,670 rpm, power of the milling unit: 6,000 W, length stop: 3,000 mm, working width: 500 mm, working height: 250 mm, input voltage: 400 V, power: 6 kW (8.16 HP), Mafell ZAF 250 - EXCELLENT CONDITION Scope of delivery: -1 milling head, complete with reversible blade; -1 support table Maximum wood dimensions (W x H) rectangular: 500 x 250 mm Maximum wood dimensions (W x H) 60°: 220 x 250 mm Length of the support with scale: 3000 mm Feed rate: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idling speed: 6670 rpm Nominal power: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly and accurately, efficiently and with a perfect fit. - Straight tenons, angled tenons, corner and mortise joints - the compact ZAF 250 Vario is the right choice. - Using a stop, the exact length scale can be adjusted. -The milling tool, specially developed for the ZAF 250, can be quickly adapted to different tenon lengths and for milling joints. -The ZAF 250 Vario has precise adjustment options and a clear control panel. Thanks to the built-in laser, you can position the wood accurately. Result: Milling with millimeter precision in any type of wood! -After the tenon geometry has been set, the milling head automatically follows the shape of the tenon and delivers the desired tenon - including surface milling, chamfering and beveling. -The ZAF 250 Vario has an adjustable feed rate for applications in hardwoods. Application area: -Tenon and mortise milling up to 60° -Material usage, e.g.: solid wood and glued laminated timber Advantages: -Significant time saving - due to simple and quick adjustment of length, angle and tenon and mortise dimensions. - Maximum wood dimensions 500 x 250 mm at 0° and 220 x 250 mm at 60°. Kjdpfx Agjzbnl Aj Usdn -Minimal space requirement – thanks to the swiveling head, the workpiece always remains in the same position. -No wood waste - fully dust-extractable.

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Ksdoy R Tk Ropfx Ag Usdn Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Condition: used, Frame clamping element (WS15) HOLZ-HER - used - ATTENTION: SET price for 4 pieces! Clamping cover type O, Clamping to console via toggle switch, Opening/closing via toggle switch ----- Technical data ----- Clamping range: 40 - 115 mm Kdjdevtrk Aspfx Ag Ujn

Condition: as good as new (ex-display), Year of construction: 2026, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT Double Miter Saw Exenso DS350E - 3000 mm ----- For wooden glazing beads, mullions, profile strips, aluminum strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Includes 1 pc. center support. - Pneumatic clamping of the components. - Exenso DS3 positioning control with 15" touch panel display in a dustproof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Manual input of cutting data - Processing of data from a cutting list (data set according to specifications) - Processing of measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Includes control cabinet, motor, and software licenses. Item 1.2 Part number 942.5203 DS hydropneumatic feed unit Item 1.3 Part number 723.0121 2 pcs. DS saw blade for wood Bevel/Angle/Flat tooth - Positive Item 1.4 Part number 942.5236 2 sets of DS combined workpiece clamping Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the Materials from above. (Free access to the worktable) Pneumatic horizontal clamp - Anti-rotation clamping cylinder with pressure piece. The clamps can be individually selected via the saw's control system. The clamping sequence can also be set via the control system. Includes safety pre-tensioning pressure. Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.5 Part number 942.5241 Ksdpfxoyy A Ike Ag Ujdn DS350 table support grooved (standard groove, special grooves according to customer specifications available on request!) Item 3.1 Part number 945.2007 Packaging DS350 (transport frame) ----- Total price in this configuration ex works - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the Offcuts for butt-jointed glazing beads instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Item 2.1 Item number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders, rotationally secured - 2 cylinder holders with clamping levers ----- OPTIONAL accessories, at extra cost upon request: ----- Item 4.3 Item number 942.5237 DS software "Extra Length" (subsequent steps must be confirmed) Sequence control incl. hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a timed sequence. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.1 Item number 944.1023 GMF 3000mm caliper complete set (1500 mm plus 1500 mm extension) Includes charger and receiver. A robust aluminum measuring rail with a measuring range of 3,000 mm is ideal for measuring glazing beads. Functionality For use on doors and large window sashes, the GMF caliper can be mechanically extended safely and quickly to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic detection Accuracy of ±0.1 mm Resolutio...

Condition: new, functionality: fully functional, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, laser wavelength: 1,080 nm, pipe diameter (max.): 350 mm, pipe length (max.): 6,000 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 500 kg, power: 1.5 kW (2.04 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 6,450 kg, total length: 10,200 mm, total width: 2,280 mm, total height: 2,530 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF6035GT 6kW tube laser cutting machine with bevel cutting function – TÜV-CE certified The SENFENG SF6035GT is a powerful tube laser cutting machine with a bevel cutting function for the precise and efficient processing of tubes and profiles. The machine is particularly suitable for metalworking companies, steel construction, mechanical engineering, vehicle construction, the furniture industry, structural engineering, and industrial tube processing. The machine is equipped with a 6kW fiber laser source and enables precise cutting as well as bevel cutting up to ±45°. This allows for efficient preparation of angled cuts, miters, and complex tube connections. Technical main data: • Model: SENFENG SF6035GT • Laser power: 6kW • Machine type: Tube laser cutting machine with bevel cutting function • Tube length: 2000–6400 mm • Round tube: Φ80–Φ360 mm • Square tube: □80–□360 mm • Minimum wall thickness for bevel cutting: ≥3 mm • Bevel cutting angle: ±45° • Positioning accuracy X/Y: ±0.05 mm • Repeatability X/Y: ±0.03 mm • Max. rapid traverse speed: 60 m/min • Max. chuck speed: 60 rpm • Max. acceleration: 0.6G • Max. tube weight: 500 kg • Machine weight: approx. 6450 kg • Dimensions: approx. 10200 × 2280 × 2530 mm • Power supply: 3-phase, 380V, 50Hz • Protection class main power supply: IP54 • CNC system: FSCUT 5000BH • Professional TubesT nesting software • Pneumatic self-centering chuck • TÜV-CE certified Processable profiles: • Round tubes • Square tubes • Rectangular tubes • Oval tubes according to drawing • I-beams • U-profiles • H-beams • Angle steel • Special profiles after technical evaluation Advantages of the SF6035GT: • Precise tube cutting and bevel cutting in one machine • ±45° bevel cutting function for complex tube connections • Pneumatic self-centering chuck for quick and efficient clamping • Stable machine structure for high cutting quality • Follow-up support for long tubes • Suitable for heavy tubes up to 500 kg • Efficient CNC control for quick operation and precise processing • Optionally available with automatic or semi-automatic loading system Kodpfxjzcm H Us Ag Ujdn Other available SENFENG tube laser models: In addition to the SF6035GT, other tube laser cutting machines from SENFENG are also available, including: SF6020T, SF6035T, SF6038T, SF9020T, SF6020NT, SF6038NT, SF9032NT, SF9035NT, SF9038NT, and SF12038NT. All of the models mentioned are TÜV-CE certified and can be selected according to tube length, tube diameter, material requirements, degree of automation, and production needs. SENFENG Germany offers professional consulting, installation, commissioning, operator training, and after-sales service. In addition, SENFENG Germany has a local spare parts warehouse to enable fast service support and short response times. If you are interested, we will be happy to advise you on the appropriate machine selection and configuration for your tube processing.

Condition: new, Year of construction: 2023, BERG+SCHMID Aluminum Circular Saw Model VELOX 350 Manual Speed: 1800+3,600 rpm - Mitre left + right 45° - Head bevel cuts up to 45° (Schifter) Kodpfjr Ilktjx Ag Ujdn - Ball bearing rotary table - Machine base - Highest cutting quality due to vibration absorption - Very smooth running cut - Pull-through start and high performance - Machine base with chip drawer Saw blade dimensions: 350x32mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein