Used Bezel for sale (160)

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 143 mm Dsdpfju I Hqqsx Apbjcn -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 166/57/H115 mm -Weight: 1.7 kg/pc.

Condition: used, lunette, steady rest, lynette Dedpfx Asu Rv Svspbscn -Clamping tool: clamping bracket -Clamping width: 142 mm -Dimensions: see photo technical drawing -Dimensions: 165/70/H125 mm -Weight: 2.5 kg

Condition: used, Bezel, moving bezel, bezel, steady rest, lynette Dsdpfx Aot Trx Aepbscn -Bezel: moving -Tip height: 180 mm -Plating: Brass -Dimensions: see photos / technical drawing -Dimensions: 340/70/H380 mm -Weight: 6.3 kg.

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 173 mm -Groove width: 42 mm -Dimensions: see photo technical drawing -Dimensions: 205/82/H46 mm -Weight: 3.3 kg Dcsdpfx Apeuqf Nijbon

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 208 mm -Groove width: 40 mm -Dimensions: see photo technical drawing -Dimensions: 230/80/H50 mm Dcodpfxeuqf Npe Apbon -Weight: 4.3 kg

Condition: used, Bezel, stick, lynette -Bottom parts: different sizes -Price: on request -Number: 4x bezel lower parts available -Price: per piece -Dimensions: Dcsdpfxjdl U Nfo Apben -Weight: kg

Condition: good (used), Moving bezel, tracking bezel, setting stick, lynette Dedsb Eu Szopfx Apbscn -Max. passage: Ø 150 mm -Edition: Gray cast iron -Hole spacing: 395 mm -Peak height: 240 mm -Drawings accompanying the photos -Dimensions: 480/455/H470 mm -Weight: 25 kg

Condition: good (used), Moving bezel, tracking bezel, setting stick, lynette -Max. passage: Ø 80 mm -Edition: Gray cast iron -Hole spacing: 340 mm -Peak height: 150 mm -Dimensions: 390/70/H320 mm -Weight: 12 kg Dcsdpfx Apeb A Nlysbon

Condition: good (used), Bezel, moving bezel, bezel, setting stick, lynette Dcedpfjb A Rqqex Apbjn -Max. passage: Ø 70 mm -Edition: Brass -Hole spacing: 295 mm -Peak height: 135 mm -Weight: 4 kg

Condition: good (used), Bezel, setting stick, lynette -Intermediate plate for: bezel -Prism size: 33/38 mm -Height: 71 mm -Drawings: with the photos -Dimensions: 345/175/H71 mm -Weight: 32 kg Dcsdpfsdpyzzex Apben

Condition: good (used), Bezel, setting stick, lynette -for: Crankshaft grinding machine -Max. flow rate: Ø mm -Peak height: 245 mm -Technical drawing: see photos Quantity: 1 piece available Dodpfx Asd Ebpwspbecn -Weight: 22 kg

Condition: used, Bezel, stick, lynette Dcodpfob A Td Rsx Apbsn -Max. Passage: Ø 65 mm -Tip height: 83 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 250/280/H65 mm -Weight: 6 kg

Condition: good (used), Year of construction: 2006, Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OPTIMUM, Lead screw and feed screw lathe type D320X920 -Machine bed: hardened Dcsdpfx Apezd Eqyjbsn -Turning length: 930 mm -Turning diameter over bed: 320 mm -Turning diameter without bed: 500 mm -Turning diameter over support: 180 mm -Spindle bore: Ø 40 mm -Spindle speeds: 65 - 1800 rpm -Three-jaw chuck: Ø 160 mm -Tailstock mount: MK3 -Drive: 1.5 kW -Accessories: 2x bezels, Multifix tool holder, see photos -Dimensions: 730/1590/H1310 mm -Weight: 525 kg

Condition: good (used), Moving bezel, tracking bezel, setting stick, lynette -max: Passage: Ø 140 mm Dsdpfxsb A Nvhe Apbocn -Edition: Red brass -Hole spacing: 335 mm -Peak height: 215 mm -Drawing with the photos -Dimensions: 450/100/H540 mm -Weight: 26 kg

Condition: good (used), Bezel, setting stick, lynette -Max. passage: Ø 70 mm -Peak height: 250 mm -Weight: 10 kg Dcjdpfx Apeb A Iuioben

Condition: new, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, color: blue, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, traction control, permissible total weight: 18000 kg, seats: fabric, interior color: anthracite, air suspension, lift axle, retarder: ZF Intarder, electronic braking system EBS, electronic stability program ESP, anti-slip regulation ASR, auxiliary air conditioning, comfort seats, driver's seat with air suspension, LED headlights, radio, power steering, alloy wheels, electric windows, immobilizer, sun visor, all-season tires, digital exterior mirrors, XG+ cab, cab with air suspension, adaptive cruise control with FCW and AEBS-3, lane change warning system, Goodyear R1, 315/70R22.5 GO EQMDU 154/150 L Traction ABB 3P RR, not applicable, emission class Euro 6 OBD-E, engine H6, fuel B7, automated transmission, TraXon, 12 gears, wheelbase 4.00 m / rear overhang 0.99 m, standard component arrangement, PACCAR Connect 10-year subscription, external sun visor, signal horns, 1 set, high beam assistant, LED skylights, additional LED lights, FH roof, prepared, two LED headlights for the rear of the cab, all-round lights on the front of the cab, prepared, windshield with sun protection film, laminated glass with sun protection film, main mirror, convex main mirror, no front mirror, DAF Corner View, side deflectors, extended, both sides foldable, side skirts with extension on the upper/lower side, lower cab step in cab color, mirror housing in cab color, cab color, roof spoiler, color of side deflector: cab color, color of side skirt: cab color, color of headlight bezel: cab color, color of bumper: cab color, cab, interior trim: Natura, door panel: leather, driver's seat: Xtra Leather Air, driver's seat, swivel base, passenger seat: cinema, table, leather cover, TV, prepared, refrigerator and drawer, mattress with mattress topper for DAF Relax Bed, curtains with partition curtain, LED interior lighting: Exclusive, auxiliary air conditioning, integrated, auxiliary power supply: standard + 2x 40 A, ECAS remote control with extended functions, FMS connector, extended. Dcodsz Iud Ispfx Apbon

Condition: good (used), Bezel, setting stick, lynette -Number: 3x bezel quills -Diameter: 60 mm -Length: 140 mm Dcodpsb Ri S Uofx Apbsn -Grooves: 6/10 mm -Edition: Gray cast iron -Weight: 6 kg

Condition: new, power: 350 kW (475.87 HP), fuel type: electric, axle configuration: 2 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Options: * CRYSTAL WHITE * DAF Digital Vision System * Laminated glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windshield with sun protection film * External sun visor * Two LED headlights for the rear of the cab * Rear view camera with preparation for 2nd camera * DAF Corner View * High beam assistant * Fixed cab steps * Front chassis version: Aero floor panel * Air-suspended cab * XG+ cab * Headlight beam pattern for right-hand traffic * Headlights without height adjustment * LED skylights * Chrome trim on the front of the cab, side walls: darkened * LED headlights, cornering and fog lights * LED daytime running lights * Side fenders, foldable on both sides * Adjustable roof spoiler, for XG+ cab * Side panel: complete * Chassis color: Black * Roof spoiler color: Crystal White * Side fender color: Crystal White * DDVS housing color: Crystal White * CRYSTAL WHITE * Color of headlight bezel: Crystal White * Color of bumper: Crystal White * Lower cab step: Crystal White * Color of side panels: Crystal White * Steering wheel, leather * Driver's seat: Xtra Leather Air * Passenger seat: Xtra Leather Air * Door panel: Leather * Cab interior trim: Natura * Passenger seat, swivel pedestal * Mattress with mattress topper for DAF Relax Bed * Curtains with partition curtain * Refrigerator and drawer * Dashboard design: Vision * Auxiliary power supply: Standard + 2x 40 A * LED interior lighting: Exclusive * ECAS remote control with extended functions * Stationary air conditioning, integrated * Color of interior trim: Exclusive * Cab wall paneling: textile * Roof hatch with electric operation * Preparation for air compressor * Driver's seat, fixed pedestal * Upper sleeper bunk * Automatic cab climate control * Safety net for upper sleeper bunk/storage compartment * Armrests on both sides of the driver's seat * Armrests on both sides of the passenger seat * Storage compartment with drawer in the center console * Stationary heater with waste heat pump and timer * Speakers: Exclusive * Predictive Cruise Control * Digital tachograph, VDO version G2V2A * Speed limiter: 90 km/h * PACCAR Connect 10-year subscription * Tachograph calibration * Antennas: Radio, 2x cellular, GNSS, Extra: CB * DAF Truck Navigation * Infotainment including DAF Truck Navigation * Wireless charger * Adaptive Cruise Control with FCW and AEBS-3 * Preparation for toll system * FMS connector, extended and prepared * Driver Performance Assistant * Rear warning system * Lane change warning system * Emergency hammer * Hill start assist * DAF Side and Turn Assist * Electronic Stability Control (VSC) * Speed limit recognition * DAF Drowsiness and Distraction Detection * Main chassis switch * Standard immobilizer * Axle load monitoring * Front leaf suspension: medium * Front: 9,00 t, parabolic, 183N * Front axle 1, 9,000 kg, load index 160 * Rear axle load capacity 13,00 t * Stabilink rear axle suspension * One ride height position, standard height * Rear: Air suspension SR1344 * Rear axle 1, 13000 kg, load index 149 * Front axles: 385/55R22.5 * Alu Alcoa Dura-Bright 32 mm * F1,385/55R22.5GO EQMSU 160/158 L Steering ABA 3P * Wheel trim rings, silver-grey * Goodyear * Tire pressure monitoring system * Driven rear axle(s): 315/70 R22.5 * R1,315/70R22.5GO EQMDU 154/150 L Traction ABB 3P Dcsdpfxjz Hg Dko Apbjn * Urge-to-move * Rear axle ratio 2,38 * Mechanical

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 Dsdok Egrpspfx Apbocn - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: excellent (used), Year of construction: 1961, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm Dcjdpfx Aewfpilepbjn -Weight: 2510 kg

Condition: used, Bezel, stick, lynette -Max. Passage: Ø 102 mm Dedpsdpaqyjfx Apbjcn -Tip height: 144 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 270/70/H295 mm -Weight: 5.6 kg

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings Dcodpfeucgr Ijx Apben - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, Bezel, stick, lynette -Max. Passage: Ø 110 mm -Tip height: 220 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 440/320/H80 mm Dcsdpfx Asb A Tfkjpbon -Weight: 13.6 kg

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Completely overhauled in 2013 Heavy duty workpiece headstock Djdpfx Aexyadaepbocn tailstock Without chuck and without bezel in the photo Kelco 90 control The machine can be viewed in operation at the customer's premises from 2025 up to and including January 2026.

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 280 mm turning length 1000 mm turning speeds 70 - 2000 U/min centre height 195 mm spindle bore 54 mm Djdpfxop U Ut Ao Apbscn tailstock quill taper MT 3 MK connected load frequency 400 V total power requirement 2,2 kW weight of the machine ca. 0.85 t dimensions of the machine ca. 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool