Lathe-conventional-electronic
OPTIMUM OPTIturn TH4215D

Name: OPTIMUM OPTIturn TH4215D
Brand: OPTIMUM
Availability: InStock

Condition

New

Location

Niederlangen Germany

Lathe-conventional-electronic OPTIMUM OPTIturn TH4215D

Show map

Machine data

Machine type:: Lathe-conventional-electronic

Manufacturer:: OPTIMUM

Model:: OPTIturn TH4215D

Condition:: new

Price & Location

Location:: 49779 Niederlangen

Call

Details about the offer

Listing ID:: A9180620

Reference number:: 1125-2200001

Update:: 24.09.2025

Description

turning diameter 420 mm
turning length 1500 mm
swing diameter over bed slide 250 mm
Swingdiameter in the bed bridge 590 mm
centre height 210 mm
Turning length in the bed bridge 260 mm
reus 16 (45-1800) U/min
tail stock MK 4
quill stroke 120 mm
diameter of quill 50 mm
spindle taper DIN ISO 702-2 Nr. 6
spindle bore 52 mm
spindle cone MK 6
feed längs 17 / 0,05 - 1,7 m/min
feed plan 17 / 0,025 - 0,85 m/min
total power requirement 4,6 kW
weight of the machine ca. 1340 kg
dimensions of the machine ca. 2440 x 915 x 1375 mm
Fully equipped master and feed spindle lathes. TH 4215 with
digital position indicator DPA 21 / 3462070

- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 6
- Precisely crafted slide
- Hand wheels with adjustable fine scaling 0.04 / 0.02 mm
- Quadruple steel holder
- All guides can be adjusted using V-ledges
- Adjustment range top slide ± 90°
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Main spindle running in oil bath
- Smooth-running gear wheels, hardened and ground with 2 adjustable
Precision tapered roller bearings
- Hand wheels decoupled and tested according to EN 23125
- Two-channel right-left switch tested according to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- All metric pitches in the range 0.2 to 14mm/rev and all
Inch threads in the range of 72 - 2 threads per inch without changing the
Change gears adjustable by shift lever in the control panel
- Clockwise/counterclockwise rotation can be switched on the bed slide via the
switching spindle
- Central lubrication in bed slide
- Meehanite cast base and machine bed in one piece
- Lead screw cover
- Emergency stop device with foot control
- Safety handwheels with snap-out function in the X and Z axes
- Tailstock for taper turning adjustable ± 10 mm
- Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm
- Quick, easy and tool-free adjustment using a clamping lever
- Heavily ribbed prism bed, induction hardened and precision ground
cast iron
- Coolant device with separate coolant tank with level indicator and
oil separator; easy and complete emptying and cleaning according to DIN
- LED machine lamp in the chip guard

Models TH 4210D and TH 4215D with digital readout DPA21
- User-friendly membrane keyboard, splash-proof, closed
andglare-free
- Glass scales

Iedpfjk Egrpsx Ah Uotr
scope of delivery
- Fixed bezel passage Ø 15 - 145 mm
- Revolving bezel passage Ø 10 - 75 mm
- LED machine light
- Reducing sleeve MT 6 / MT 4
- Fixed center MK 4
- Change gear set
- Position stop with fine adjustment
- Initial filling of the machine with quality oil
- Operating tool

Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø
250 mm
Quick change holder SWH5-B set

Seller

Registered since: 2011

769 listings online

Call

Send inquiry

Telephone & Fax

+49 5939 ... show

Fax:

These listings may also fit your interest.

Listing

CONTAINER CONVOLUT OFFICE-U. LIVING CONTAINER 20FT

Ölbronn-Dürrn

1,094 km

CONTAINER CONVOLUT OFFICE-U. LIVING CONTAINER
20FT

€12,000

fixed price plus VAT

Call

Condition: good (used), For sale is a container bundle consisting of 3 x 20-foot containers. The units are insulated office or residential containers, each featuring a single-leaf entrance door and a secondary door with wind protection on one end, as well as two tilt-and-turn windows on the opposite end. The containers are fully equipped and ready for use, with electrical wiring (including fuse box), multiple power outlets, lighting, and electric radiators. Previously used as residential containers, they are in good, weather-tight condition. Each container features an exterior 400-Volt connection (with pass-through available). The listed price applies to all three containers when purchased as a package. Iedpfxoh Hx Nhj Ah Uotr Transport can be arranged upon request. The containers can be delivered to your desired location and positioned precisely using the crane mounted on the delivery vehicle. Any additional transport costs due to distance will need to be clarified in advance.

See details

Listing

Feucht

1,195 km

Milling machine
KunzmannWF 4/3 TNC 124

Call

Condition: reconditioned (used), Year of construction: 2002, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 344025 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D touch probe system for recording the workpiece position for determining workpiece reference points for measuring a finished part incl. Weldon chuck SK40/Ø 16 mm - universal table 650 x 395 mm (T-slot: 14 mm) can be swiveled around 3 axes can be rotated 360° (as 4th axis digital displayed in the control) pivotable +/- 30° tilting range towards the machine 45° tilting range away from the machine 15° centering hole Ø 32 mm table load 150 kg - vertical milling head SK 40 with hydraulic tightening system DIN 69872 Itedpjm Nbwtofx Ah Usr - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - operating instructions used as seen The machine is technically corresponding to the state of the year it was built.

See details

Listing

L + Z lathe, turning machine, mechanic's lathe WEILER LZ PRIMUS GS

Hessisch Lichtenau

989 km

L + Z lathe, turning machine, mechanic's lathe
WEILERLZ PRIMUS GS

€9,700

fixed price plus VAT

Call

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light Iedpfjrtd Uwsx Ah Ustr - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

See details

Listing

Mularzów

1,645 km

E.Gillet/ no Primultini
E.Gillet1600

€50,000

ONO plus VAT

Call

Listing

Wiesbaden

979 km

Stylus grinding machine
KIRBAUG 2

Call

Listing

Conventional Horizontal Lathe - Turnado 230/2000 Knuth Turnado 230/2000

Wasbek

869 km

Conventional Horizontal Lathe - Turnado 230/2000
KnuthTurnado 230/2000

Call

Condition: new, The Turnado 230/2000 is a versatile and robust Conventional Horizontal Lathe from KNUTH, designed for various machining needs within the Engine Lathes product group. This modern version of the classic lathe features a heavily ribbed machine bed and a powerful main motor, providing high torque and a wide range of spindle speeds. It includes essential accessories such as a 3-jaw lathe chuck, a 4-jaw independent chuck, and an integrated coolant system, making it efficient for operational tasks. The user-friendly control panel ensures easy operation, while the high-quality spindle support delivers precision even under heavy loads. With a maximum workpiece length of 2,000 mm and a turning diameter of 460 mm, this machine is built to offer lasting high value and high productivity. You can request a quote to enhance your machining capabilities with the Turnado 230/2000, your ideal choice in the Conventional Horizontal Lathes category. Itjdpfxop Ebgrj Ah Ujr

See details

Listing

Zuzenhausen

1,070 km

Compact cutting mills
ZERMAGSE

Call

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economical cutting mills: This GSE series is ideal for all injection molding and blow molding companies. It is basically suitable for all thin-walled plastic waste. These cutting mills are characterized not only by their low purchase price, but also by their robust, split steel/welded housing, the easy cleaning option and easy blade and screen changes. Thanks to the tangential housing geometry in conjunction with V-cut rotors (except GSE 300/300), even bulky and large-volume feed parts are accepted and shredded by the rotor. Itjdsghgbtepfx Ah Usr Grinding material transport: The cutting mills are equipped with an extraction system and bagging station as standard. A grinding material collection container is also available as an option, which, like the extraction tray, is made of stainless material.

See details

Listing

Metal bandsaw OPTIMUM OPTIsaw S275N - Exhibition machine - OPTIMUM Metallbandsäge OPTIsaw S275N

Bad Honnef

891 km

Metal bandsaw OPTIMUM OPTIsaw S275N - Exhibition machine -
OPTIMUMMetallbandsäge OPTIsaw S275N

€1,999

fixed price plus VAT

Call

Condition: new, OPTIMUM OPTIsaw S275N metal band saw - Exhibition machine - Feed infinitely adjustable, tiltable ----- Technical data ----- Swivel range: 0 - 60 °, Itjdpfx Ahou R S Hpj Ujr Cutting height: 150 mm, cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new exhibition machine -

See details

Listing

Hövelhof

893 km

Bench drill press
FLOTTTB 23L

€650

fixed price plus VAT

Call

Listing

Universal tool milling machine KUNZMANN UF 6 NR

Waiblingen

1,136 km

Universal tool milling machine
KUNZMANNUF 6 NR

Call

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR Itedoiqkc Ispfx Ah Ujr year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank

See details

Advertise here