Used Biesse Rover 336 for sale (339)

Condition: excellent (used), workpiece length (max.): 6,700 mm, workpiece width (max.): 1,900 mm, workpiece height (max.): 290 mm, number of axes: 5, Rover B edge 1967 5 axis 13,2KW liquid cooled drilling head BH40L 29vertical +10horizontal + saw Automatic pod and rails position Edge banding Aggregates for edge banding Njdpfjylcgpex Ah Ssdc uniclamp vertical + horizontal Very good condition

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable speed: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: diameter 10 mm Spindle speed: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles on the X-axis, 12 vertical spindles in the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Ndedpfxoydf Nde Ah Soc Vacuum tool capacity: 40 m³/h CNC: Display: monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Stock location: Röllbach

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Working area X: 3640 mm Working area Y: 1342 mm Ndsdpszmff Nefx Ah Ssc Part clearance: 180 mm 12 kW C-axis electrospindle, ISO30 mounting Drill bits for vertical drilling: 24 Drill bits for horizontal drilling X: 6 Drill bits for horizontal drilling Y: 4 Saw blade for grooving in the X direction 12-position revolver tool changer Work table with 6 rails with EPS automatic positioning of the rails, vacuum cups Chip conveyor belt 1 vacuum pump with a capacity of 90 m3/h Safety mats Approximate weight: 4000 kg. Includes 3 aggregates (for door milling, mortising, etc.), vacuum cups, and some Uniclamps. Only 1406 operating hours on the 4-axis electrospindle, and 831 hours on the drilling unit. Available from January 2027.

Condition: used, Year of construction: 2013, Working center with automatic robot for panel loading and unloading management Biesse XP600 Numerical Control with Biesse Works ADVANCE graphic interface software - machine version and version office - WRT technology (Widows real time) the machine control logic is processed directly on the PC and not on a dedicated special device Working field in X axis 6200 mm Working range in Y axis mm 1552 Working field in Z axis 180 mm Z axis travel mm 235 N ° 2 work fields in X axis Bar worktop \ console No. 10 EPS electronically adjustable bars for suction cup support N° 8 pneumatic bakelite bars for lifting the panel - loading / unloading aid N° 4 EPS electronically adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing N° 1 vertical electrospindle, with automatic tool change, motor KW 12 - 12000 RPM - flange for aggregates - preparation for C-Axis Vector Automatic tool change system with 12 positions - positioned on the machine head BH35L boring head with spindles arranged as follows: - N° 14 verticals in X axis - N° 10 vertical in Y axis - N° 6 horizontal in X axis - N° 4 horizontal in Y axis Independent blade for making grooves in the X axis - diam. 120 mm Front protection and safety system with carpets Perimeter protection grids Automatic lubrication system Machine control cooling and cleaning system with conditioner Vacuum pump mc / h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Nedpfxekvrxue Ah Sodc Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 translating motorized roller conveyor * 1 motorized panel stack unloading roller conveyor Technical features: * Type : KR210-2 * Number of axles : 6 * Admissible nominal load : Kg 210 * Machine weight : Kg 1267 * Sound level: 75dB * Installed power: 25.8 kW * Panel dimensions - Min\max length: mm 300\3000 * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: Kg 90

Condition: used, machine/vehicle number: 008338, X axis working area: 4500 mm Y axis working area: 1935 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Ndedpfx Ajx A Tkxsh Sjc Number of controlled axes: 5 axes Total number of drilling spindles: 41 Total number of tool changer positions: 37

Condition: used, machine/vehicle number: 007087, X axis working area: 4300 mm Ndedpfxey Nkrvs Ah Sec Y axis working area: 2200 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 40 Total number of tool changer positions: 30

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, empty load weight: 7,200 kg, working width: 1,535 mm, spindle speed (max.): 20,000 rpm, working height: 275 mm, working length: 6,200 mm, Submitting a bid obliges you to collect the machine by June 22, 2026! TECHNICAL DETAILS Number of milling spindles: 2 Milling spindle 1 Number of controlled axes: 5 Spindle speed: 1,000 - 20,000 rpm Main motor power: 9 kW Milling spindle 2 Number of controlled axes: 3 Main motor power: 18.5 kW Tool changer positions: 22 Tool clamping system: HSK-F63 Working area X-axis: 6,200 mm Working area Y-axis: 1,535 mm Working area Z-axis: 275 mm X-axis maximum travel: 6,820 mm Y-axis maximum travel: 1,963 mm Table length: 6,200 mm Table width: 1,320 mm MACHINE DETAILS Software: BiesseWorks Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,400 x 2,500 mm Unladen weight: 7,200 kg Transport packages: 1 piece EQUIPMENT Vacuum pump Becker VTLF 250 (main motor power 5.5 kW; capacity 250 m³/h) Safety mat Pneumatic material clamping system Beam table Ndodpfxey Tu Upo Ah Ssc CNC documentation: USB stick, user key/licenses

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Panel thickness (edge banding unit): 14 - 60 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool changer positions: 22 Number of suction beam traverses: 10 Milling Unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Glue unit Tool magazine Grooving unit Number of places in tool magazine: 22 MACHINE DETAILS Nodjyqzrnopfx Ah Sodc Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety grid Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8011

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Total number of tool changer positions: 14 Ndjdpfx Ahow Idgvj Sjc

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Nodpfx Aeyqxxrjh Sjdc Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 39 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008270, X axis working area: 4320 mm Y axis working area: 1500 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Ndjdpszw Dxcofx Ah Sjc Total number of drilling spindles: 23 Total number of tool changer positions: 22

Condition: excellent (used), 4-axis machining center work area: 3200 x 1350 mm Ndodpfx Aszzd S Dsh Sec automatic tool changer

Condition: used, machine/vehicle number: 008560, X axis working area: 3140 mm Y axis working area: 1260 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Nodpfozvwtqsx Ah Sjdc Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 13

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Nodpfx Ahjyzyrvs Sjdc Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 46 Total number of tool changer positions: 22

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, number of axes: 4, table length: 4,300 mm, table width: 2,200 mm, number of spindles: 40, tool diameter: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X-direction: 6 Number of spindles for horizontal drilling in Y-direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Njdpfx Aoyq Ez Tsh Ssdc Number of stations in tool magazine 1: 22 Number of stations in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT • Automatic panel loading system • Automatic panel stacking system • Lift table • Conveyor system • Vacuum pump Note: The safety fences at the rear and on the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered as-is, in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive materials. The buyer has the right to inspect the machine prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7087

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Ndjdpowuz Eksfx Ah Ssc Total number of tool changer positions: 16

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Ndedpey Ehrxsfx Ah Ssc Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), CNC CELL with AUTOMATIC panels handling for routering, boring, cutting and edge banding BIESSE Machine with a movable gantry (on the X-axis)–CNC with “bTouch” screen and “bPad” wireless console Software bSolid+bEdge, connection to SOPHIA, IoT (Industrial Internet of Things) platform N. 10 supports ATS (L = mm 1800), with automatic EPS (Electronic Positioning System) Automatic tool change system (Tools storage plate in X-axis / 16 positions) Useful working area (X - Y - Z) mm 6735 x 1650 x 245 (290) Useful working area (X - Y - Z) in edge banding mm 5780 x 1930 x 60 N. 2 Working areas - Vacuum pump (capacity m3/h 250) - Motorized carpet to evacuate wastes/chips 1st Y-axis)- 2 machining heads (upper) in 4 slots Slot 1 + Slot 2: N° 1 vertical HSK F63 electrospindle (13.2 kW) with C-axis (360°) and air blowers Automatic tool change system (Tools storage plate in Y-axis / 6 positions) N° 16 (or 20) independent vertical drilling spindles + N° 6 (or 8) independent horizontal drilling spindles Njdpfxozxnphj Ah Sedc N° 1 Circular Saw (grooving) 120mm diameter (on the X-axis) Slot 11 + Slot 12: N° 1 vertical spindle HSK F63 (13.2 kW) with C-axis (360°) and air blowers Automatic tool change system (Tools storage plate in Y-axis / 6 positions) N° 16 (or 20) independent vertical drilling spindles + N° 6 (or 8) independent horizontal drilling spindles N° 1 Circular Saw (grooving) 120mm diameter (on the X-axis) 2nd Y-axis - Edge Banding Unit - GU60C Glueing Unit (Hot Melt EVA glue) / Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (for 2+2 = 4 reels) 200312) automated panels loading +unloading, using a KUKA robot (moving along the X-axis)

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 94464, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, controller model: XNC Numerical Control, TECHNICAL DETAILS Working Area X-Axis: 3,400 mm Working Area Y-Axis: 1,300 mm Working Area Z-Axis: 155 mm Number of Work Fields: 2 Tool Changer Positions (lateral): 3 Tool Changer Positions (chain): 20 Nsdpfx Aheydkkgs Sedc Drilling Head Configuration: 10 vertical drills X-axis 12 vertical drills Y-axis 6 horizontal drills X-axis 2 horizontal drills Y-axis MACHINE DETAILS Control System: XNC Numerical Control Vertical Spindle Type: C-axis Vector, ISO 30 cone type EQUIPMENT Extraction pump 8 manually adjustable beams for suction cup support with display 8 pneumatic bakelite rails for panel lifting 3 manually adjustable suction cups per beam Front safety and protection system with mats Comprehensive safety fencing Motorized mat for chip removal

Condition: used, machine/vehicle number: 007686, X axis working area: 3765 mm Nsdpfxsu Tliyo Ah Sodc Y axis working area: 1560 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 008184, X axis working area: 8200 mm Ndodpfx Ahjyxmv Ne Ssc Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of tool changer positions: 22

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 6,170 mm, travel distance Y-axis: 1,395 mm, travel distance Z-axis: 180 mm, drill diameter: 35 mm, rotational speed (max.): 24,000 rpm, Submission of bids obligates timely collection by the end of May! TECHNICAL DETAILS Travel axis X: 6,170 mm Travel axis Y: 1,395 mm Travel axis Z: 180 mm Spindle Main spindle power: 7.5 kW to 12 kW Max. speed: 24,000 rpm Tool holder: HSK F63 Drilling head Vertical spindles X-direction: 10 Vertical spindles Y-direction: 10 Horizontal spindles X-direction: 6 Horizontal spindles Y-direction: 2 Max. drilling diameter: 35 mm Usable length: 45 mm Max. outreach: 60 mm Tool change system Turret tool changer capacity: 18 tools Holder: ISO30 / HSK F63 Max. tool diameter: 200 mm Max. tool length: 160 mm Working length: approx. 7,300 mm MACHINE DETAILS Clamping and vacuum system Vacuum pump capacity: 90 m³/h Uniclamp clamping unit workpiece thickness: 4,098 mm Electrical system Connection: 400 V / 50 Hz / 3 Phase Power: 22 kW Compressed air Connection: 3/8" Operating pressure: 6 bar Consumption: approx. 400 NL/min Extraction Connection diameter: 250 mm Air requirement: 5,300 m³/h Air speed: 30 m/s Pressure drop: 1,500 Pa Dimensions & Weight Dimensions (L x W): approx. 8,850 x 4,020 mm Machine weight: approx. 4,750 kg EQUIPMENT Ndjdpfx Ajy Iwuhsh Soc Portal design with movable machining unit 10 consoles with adjustable vacuum supports 30 adjustable support elements Multi-zone vacuum system Automatic central lubrication Chip conveyor Blow-off device for spindle Pneumatic preparation system Safety equipment in accordance with Directive 98/37/EC CNC control (Biesse system)

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, number of spindles: 21, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,300 mm Ndsdjytr Ryopfx Ah Soc Travel speed X-axis: 80 m/min Travel speed Y-axis: 60 m/min Travel speed Z-axis: 25 m/min Number of suction traverses: 6 Spindles Number of spindles for vertical drilling: 15 Number of spindles for horizontal drilling in X-direction: 4 Number of spindles for horizontal drilling in Y-direction: 2 Total number of spindles: 21 Milling unit Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Tool changer Number of tool positions: 10 MACHINE DETAILS Total power: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Cones and milling cutters are not included in the scope of delivery. Safety fences will be supplied subject to availability (right side missing). The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8174

Condition: used, Year of construction: 2019, functionality: fully functional, Used Biesse WINLINE 16 2Y – CNC machining center with 2 Y-axes The Biesse WINLINE 16 2Y is a CNC machining center with automatic workpiece handling, powerful electrospindles, and flexible machining options. The machine is suitable for efficient and precise machining of wood and panel materials. Ndsdpfxe Aazt Tj Ah Sec Specifications 30 kW electrospindle - HSK F63 tool holder - 25 kW continuous power (S1) - Programmable speed: 1,000–18,000 rpm - 360° interpolating C-axis with Direct Drive - High precision and flexible machining 5-axis electrospindle - 16.5 kW peak / 14 kW continuous power (S1) - HSK F63 tool holder - Water-cooled spindle - C-axis with 360° continuous rotation - B-axis with undercut capability up to -10° - Max. 18,000 rpm Tool changer - 44-position tool changer - Max. tool/aggregate weight: 10 kg - Max. total tool weight: 140 kg ### Automatic workpiece handling - NC-controlled loading and unloading - 3 workpiece clamps - 6 EPS supports with clamps along the Y-axis - Option for an additional 2 supports - Max. workpiece size with automatic handling: 3,200 × 200 × 140 mm - Min. workpiece size with automatic loading: 300 × 40 × 40 mm ### Control and other equipment - bSolid CAD/CAM software with 3D simulation and collision detection - BH660 PC-based control - CE safety enclosure - Chip conveyor and automatic lubrication - UPS and wireless bPad - Conveyor belt for loading and unloading workpieces up to 3,200 mm - Labeling equipment, chip deflector, and 350 mm saw blade and horizontal milling head Contact us for more information about the machine's condition, price, and delivery.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,560 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, rotational speed (max.): 20,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis working area: 5,900 mm Y-axis working area: 1,560 mm X-axis travel speed: 80 m/min Y-axis travel speed: 60 m/min Z-axis travel speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 6 Horizontal drilling spindles in Y-direction: 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Motor power: 10 kW Spindle speed: 20,000 rpm Tool changer Ndodpfjyxm Swex Ah Ssc Number of positions: 10 Tool: head-mounted MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT EQUIPMENT Work table with suction cups Number of suction bar rows: 10 Suction cups for securing the workpiece Vacuum pump The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photographic documentation and descriptive technical/commercial documents. The buyer is entitled to inspect the item before collection and is responsible for installation, securing and use of the machine at the final destination. External reference: 8173