Used Blow Moulding for sale (2,554)

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total length: 680 mm, total width: 970 mm, total height: 1,550 mm, conveyor belt width: 750 mm, empty load weight: 250 kg, Equipment: chassis, New machine with a 24-month warranty Stainless steel model Advantages: + Excellent price-performance ratio + Complete machine with stainless steel cladding + Robust baguette long roller + Equipped with a secure, high infeed hopper Codpfjhydbtjx Al Aohc + With a safety switch on the filling hopper, which immediately stops the machine (see video!) + Conveyor belts made of felt + Simple, mechanical adjustment of the long roller settings + Fast spare parts supply within 1-2 working days SPECIAL accessories, optionally available at an extra cost: - Chassis: + EUR 440.00 net --- with 4 swivel castors, 2 of which have brakes - Guide for loaf breads: + EUR 500.00 net Technical data: - Long roller width: max. 750 mm - Weight range: 50 - 1,200 g - Hourly output: approx. 1,200 pieces (depending on the dough) - Motor power: 0.37 kW - Connection values: 400 V - 3-phase - 50 Hz - 16A CEE plug - Dimensions: 97 x 68 x 155 cm (W x D x H) - Machine height: approx. 70 cm (without chassis) - Net weight: 250 kg

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Rietschle, side channel vacuum pump side channel compressor -Type: SKG 245-2 Cjdsqddkgepfx Al Ashc -Drive: 1.1 kW -Speed: 2850 rpm -Flow rate: max. 170 m³/h -Compression pressure: 130 mbar -Number: 1x compressor available -Price: per piece -Dimensions: 450/310/H370 mm -Weight: 27 kg

Year of construction: 1995, condition: good (used), Radial fan from Venti Oelde with inlet silencer. !! Performance curve provided as an image attachment!! Volume flow: 46,308 m³/h Pressure increase: 4830 Pa / 48.3 mbar Weight: 2750 kg Temperature: 30°C Speed: 1480 rpm Fan efficiency: 82.9% Shaft power: 73.8 kW Motor power: 110 kW (90 kW also possible) Motor: VEM 315 S4 Voltage: 400 Volt / 50 Hz Year of manufacture: 1995 Chedpfjd Nqlcjx Al Aec

Condition: used, Year of construction: 1986, Second-hand machine Year of manufacture: 1986 Features and technical specifications: Motor: 4 kW Chsdpfx Aljzk Nw Ro Aoc Speeds: 3,000 / 4,500 / 6,000 / 8,000 / 1,000 rpm. Spindle height adjustment via handwheel Dimensions: 1200 x 80 x 1350 mm Wooden clamping jaws Includes Holz Her 3-roller feed unit and stand with chassis Availability: at short notice Location: Röllbach

Condition: used, Second-hand machine Features and technical specifications: - heavy-duty cast iron construction - Motor: 5.5 kW - Spindle diameter: 30 mm - 2900–4400–6000–7800–10,000 rpm - Height and swivel adjustment: electrically driven - Fine adjustment: via handwheel - with Panhans metal stop jaws Chjdpfx Aszk N R Del Ajc - with Holz-Her 3-roller feed mechanism Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2011, Weinig CUBE Moulding machine Description; Dimensions of the infeed table: 2000 mm Number of axes: 4 Spindle Sequence: Bottom-right-left-top Motor power resp. 5,5 - 5,5 (R+L) - 5,5 kW Mobile spindle: No Tools: Weinig Easylock Planing width: 20 / 260 mm Codpszqddrsfx Al Ajhc Planing height: 80 / 160 mm Throughput: 12 m/min Groove bed: No Other comments: Optical laser projection, 10" touchscreen (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Centrifugal fan, Fan, Exhaust fan, HRV 56N-400/M GL 360, used machine Manufacturer: Venti Oelde Type: HRV 56N-400/M GL 360 Overall dimensions: 1050 × 1120 × 1010 mm Weight: 280 kg Airflow capacity: 14,400 m³/h Year: 2014 Cedozwz Tdjpfx Al Aohc Electrical data: 22 kW, 400 V, 50 Hz, 39 A

Condition: not inspected (used), Year of construction: 1997, SCM Compact 23 K Moulder Description Spindle sequence bottom-right-left-top Infeed table length 2500mm Max. Working width 230mm Max. Working height 120mm Feed speed 6-12 mtr / min Spindle speed 6,000 rpm Chjdpfxswc A R Dj Al Ajc 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm Cjdpfx Aozwdn Dol Aehc -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

Condition: excellent (used), functionality: fully functional, working width 230mm working height 140mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM electric regulation of pressure beam Chodpfszxxy Rox Al Asc feeder with cardan variable regulated feeder heavy silenced cabinet

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom Codezxx D Nepfx Al Ajhc spindles diameter 40mm Memory System control table lubrication spindles speed 6000 RPM

Condition: used, functionality: fully functional, Planing width max. 230 mm Planing height max. 120 mm Number of spindles 4 Spindle speed max. 6,000 rpm Feed table length approx. 2,000 mm Motorized adjustment of planing width, planing height Feed rate max. 24 m/min Cjdpjzdk Dfofx Al Ajhc Emergency stop Dimensions approx. (L x W x H) 4,100 x 1,500 x 1,600 mm Weight approx. 2,800 kg

Condition: used, Year of construction: 1963, Rigid milling machine Year of manufacture: 1963 Spindle diameter 30 mm Codezk N Iiepfx Al Aehc Availability: at short notice Storage location: Röllbach

Condition: good (used), Year of construction: 2011, spindle diameter: 40 mm, number of spindles: 7, Weinig Unimat 500 Year of manufacture: 2011 Planing width: 230 mm Planing height: 120 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Number of rollers in the table: 2, driven with 150 mm width Feed rate: 5 - 30 m/min Feed motor: 5 kW Memory function: 3 sets of radially CNC-controlled adjustments for spindles 3, 5, and 6 Spindle arrangement: Cedpfx Aszzv Abel Ajhc Bottom: 7.5 kW Right: Left: 7.5 kW Right: 5.5 kW Top: 7.5 kW Top: 7.5 kW Bottom: 11 kW

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Spindle Power: Bottom spindle: 4 kW Right spindle: 7.5 kW Left spindle: 7.5 kW Top spindle: 7.5 kW Bottom spindle: 4 kW Universal spindle: 4 kW Planing width: 220 mm Planing height: 120 mm Max. spindle speed: 6,000 rpm Spindle diameter: 40 mm Feed rate max.: 22 m/min (infinitely variable) Feed motor: 3 kW Main motor: 7.5 kW Pneumatic top pressure Feed via cardan drive Motorized adjustment (planing width and height) Chedsyybdwepfx Al Aec Infeed table length: 2,000 mm Integrated lubricant pump

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 114550, working width: 230 mm, planing height: 120 mm, number of spindles: 6, Planer and moulder Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control and the proven PowerLock quick-change system, and also features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable: 2.5 m (including straightening fence) Top pressure rollers, spring-loaded Lateral pressure, pneumatic Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Reduced feed roller distance between pendulum holders (400 mm) Additional feed rollers and shortened roller spacing Durofer steel roller, self-cleaning Cedsx Sxfvopfx Al Ajhc Infeed roller in front of the 1st bottom tool, pneumatic Siemens/Powercom control The machine is in a very good, well-maintained condition, has been professionally operated and regularly serviced, and will remain in operation until 17.12.2026. Inspection of the running machine is possible anytime by appointment. The price includes the tools for all 6 spindles. Dismantling and loading will be invoiced separately to the buyer. The technical description and the machine layout can be found in the documents.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW Codpfjzp Rmqsx Al Ashc - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: used, total length: 1,150 mm, total width: 900 mm, total height: 1,800 mm, Colour: Green Empty weight: 400 kg - Documentation available: No - CE certificate present: No - Spindle diameter [mm]: 25 - Table length [mm]: 1150 - Table width [mm]: 900 - Tiltable spindle: Manual - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 - Feeding device present: Yes - Brand: Holz-her - Number of wheels [pcs]: 3 - Tool key included: Yes Chodpfx Aey Nc Aajl Asc - Tools (milling heads) included: Yes - Spindle speed: Manual - Min. spindle speed [rpm]: 1400 - Max. spindle speed [rpm]: 1200 - Voltage [V]: 400 - Fuse [A]: 32 - Transport dimensions: 1150mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1992, Spindle arrangement: bottom – right – left – top Planing width min./max. 8-180 mm Planing height min./max. 5 - 120 mm Length of infeed table: 2000 mm Feed rate: 8 m/min Chsdpfxsz Abtho Al Ajc Feed rollers: pneumatic Infeed roller before the jointer Electric height adjustment of the feed beam Manual width adjustment via crank 4 planing cutterblocks, each with 2 knives 1 pre-jointer Fold-up safety guard 4 dust extraction connections Total connected power approx. 18 kW Dimensions approx. L x W x H 3000 x 1000 x 1450 mm Weight approx. 1200 kg

Condition: excellent (used), functionality: fully functional, working width 250mm Chsdjzxz Hmspfx Al Asc working height 140mm 8 heads 3 toothened rolls in the table before first head heads set: bottom/right/left/right/left/top/top/bottom variable regulated feeder to 100m/min spindles diameter 50mm two side bearings of spindles feeder with cardan spindles speed 6000 rpm pneumatic pressure of feeding rolls two side heads regulation two axes heads regulation iron cast body

Condition: used, Year of construction: 1987, Used Machine Year of Manufacture: 1987 Condition: Completely Overhauled Features and Technical Specifications: - Table size: 1100 x 760 mm - Motor: 4.7/5.7 kW, pole-changing - With clockwise/counterclockwise rotation - Milling spindle: MK 5 / 30 mm - Height and swivel adjustment via handwheel - Speeds: 3000/4500/6000/9000 rpm - Swivel range of the milling spindle: -5 to 45° - Milling stop with metal jaws - Mounted on a round insert plate and thus rotatable 360° - With table extensions on both sides featuring extendable frame supports - With 4-roller feed mechanism Weight: approx. 900 kg Pictures show the machine in its pre-overhaul condition Availability: approx. 4 weeks after order placement Csdpfszk Nziox Al Ashc

Condition: used, Year of construction: 1986, Table milling machine Manufacturer: Schneider Type: SK2/4 II Year of manufacture: 1986 Technical data - 3,000 - 10,000 rpm - Runs in both directions (left/right) - with Haffner feed unit - including accessories Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Csdpfx Aszuyxael Aehc

Condition: good (used), Year of construction: 2003, functionality: fully functional, planing width: 230 mm, working height: 100 mm, Planer Moulder P 1000 UNIMAT STAR with 6 Tool Holders Chedpfx Aexyu Itjl Ajc

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230DBK Dust Collector is a professional dust extraction unit designed for the efficient removal of sawdust, wood chips, and dust generated during the machining of wood, metal, and plastics. With its compact design, high suction pressure, and 1,000 m³/h airflow capacity, it is an ideal solution for woodworking shops, technical schools, and craft workshops. Its lightweight construction, quiet operation, and excellent mobility make it a practical and efficient dust collector for users seeking reliable performance in a compact package. Key Features 1,000 m³/h airflow capacity – efficiently removes sawdust, chips, and dust from a single workstation. 0.75 kW motor powered by 230 V – operates from a standard mains outlet without requiring electrical modifications. Ø230 mm metal impeller – dynamically balanced for smooth, quiet operation and long service life. Vacuum pressure up to 1,030 Pa – delivers powerful suction, even when handling heavy or damp wood chips. Adjustable Ø100 mm extraction inlet – compatible with a wide range of woodworking and industrial machines. Mobile wheeled base – allows the unit to be moved easily between workstations. 56 L collection bag – reduces the frequency of emptying and supports uninterrupted operation. Low noise level (approx. 70 dB) – provides comfortable operation in enclosed workshop environments. Construction and Technology The CORMAK FM230DBK woodworking dust collector is built around a proven impeller-based extraction system. Its 230 mm dynamically balanced metal fan operates at high speed to generate stable suction, ensuring efficient removal of dust and chips directly from woodworking machinery. The 56 L textile collection bag is mounted on a sturdy steel frame for quick removal and replacement, helping maintain continuous productivity. The entire unit is installed on a mobile base with four wheels, making it easy to reposition even in confined workshop spaces. The adjustable Ø100 mm extraction inlet allows simple connection to a variety of machines with different dust extraction configurations. Performance and Efficiency Cedpfx Asvu Aprjl Ajhc The FM230DBK combines powerful extraction performance with quiet, energy-efficient operation. Its large-diameter metal impeller and high static pressure significantly reduce the risk of clogging, while the 1,030 Pa vacuum pressure effectively captures heavier particles and larger wood chips. Thanks to its relatively low operating noise, the unit is well suited for enclosed workshops where maintaining a comfortable working environment is important. Standard Equipment Mobile wheeled base Heavy-duty steel support frame Flexible extraction hose with nozzle 56 L textile collection bag Adjustable Ø100 mm extraction inlet Optional Equipment High-efficiency filter bags Multi-point extraction manifolds Antistatic Ø100 mm flexible hoses Reducers and adapters for non-standard machine connections Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,000 m³/h Maximum vacuum pressure 1,030 Pa Impeller diameter Ø230 mm Extraction inlet diameter Ø100 mm Collection bag capacity 56 L Noise level Approx. 70 dB Overall dimensions 1,100 × 500 × 1,300 mm Weight 21 kg

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, spindle diameter: 50 mm, type of input current: three-phase, input voltage: 400 V, number of spindles: 9, input frequency: 50 Hz, input current: 184 A, WEINIG Hydromat 23 - 9 heads, refurbished in 2020 Opre Annamária: Oh +36 20 949 4988: For sale: a WEINIG Hydromat 23, one of the most reliable machines for professional woodworking. The machine underwent a complete overhaul in 2020 at a German specialist service center and has been operating flawlessly ever since. Technical specifications: - 8 + 1 universal heads, total 74.5 kW (lower 11 kW, upper 11 kW, the remaining heads 7.5 kW, including one universal head) Chedpfx Alsztpgwo Aec - Working width: 230 mm - Working height: 160 mm - Tool/spindle diameter: 50 mm - Year of manufacture: 2000, complete overhaul in 2020 at a German specialist service center The machine can be viewed and tested in operation by prior arrangement in Nagytarcsa, near Budapest, Hungary. Available as a separate option: with many planing heads, planing knives, accessories, and a dust extraction system. Price: 59,000 EUR