Used Injection Plastik for sale (1,831)

Condition: good (used), Manufacturer: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Serial No.: M0793 Made in: West Germany (Kelberg / Eifel) Type: Single-screw plastic extruder Documentation: Included (original German manual and correspondence from 1987) Condition: Used, but complete and fully functional Location: Ivanka pri Nitre, Slovakia Technical Details (approximate) Screw diameter: 30 mm L/D ratio: 25 D Main drive motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 rpm) Iaodpfx Ajxu E E Seddsl Power supply: 3 × 380–420 V / 50 Hz Control voltage: 220 V Cooling system: Air-cooled barrel with heating zones Control cabinet: Included, equipped with relays, circuit breakers, and analog meters Description Compact single-screw extruder for laboratory or small-scale production, manufactured by Plastik-Maschinenbau GmbH in West Germany. Designed for processing thermoplastics, material testing, or small extrusion lines (e.g., tubing, profiles, or coating applications). Supplied with the original electrical cabinet, pressure gauge, and documentation. Mechanically and electrically complete; ready for standard commissioning.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2 h, functionality: fully functional, machine/vehicle number: LM 500 W6-P, A Plasmek Plastic Makinalari LM500 W6-P wrapping machine is for sale due to lack of use. The machine has virtually zero operating hours and has not been used. All parts and accessories are included. Ijdpfxsw H Rpvs Addeal

Condition: excellent (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 21.1605, 21.1702, 21.1600, 21.1682, type of input current: three-phase, Complete line for rigid plastic for washing, drying and remove fluff and dust, with a 1.5-2 tones / hour productivity: Iasdpswpm U Tsfx Addjl - sink-float water tank - horizontal friction washer - mechanical cleaner and dryer - zig-zag classifier and big-bag loading system - electric control panel for entire system The parts that come into contact with water are made of stainless steel or hard steel. Machines with a ladder and a pedestal for inspection (sink-float water tank and horizontal friction washer) allow installation on both sides, also the machines in the line allow rotation relative to each other, the line can be I or L or U shaped. The line is perfectly functional, very little used, it was purchased for a project that did not materialize.

Condition: reconditioned (used), operating hours: 27,716 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 1,980 mm, total width: 815 mm, total height: 1,897 mm, overall weight: 1,105 kg, Now fully refurbished by the team at STV Machinery is this Boy 22M-HV machine. It has a horizontal clamp unit and a vertical injection unit which it makes it suited for split-line injection. It is fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. Isdex U Ay Nopfx Addsal Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements height 470 mm Dimensions Machine Length 470 mm Clamping Unit Clamping force 1100 kN This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information. Iajdpfxex D Ea Ue Addjl Application Types Injection Moulding

Condition: good (used), Year of construction: 1996, operating hours: 24,222 h, Description Type: BOY 80M Year of manufacture: 1996 Ijdpfox Swn Nox Addoal Operating hours: 24,222 hours Screw (high wear resistance): 42 mm Max. injection pressure: 1,532 bar Max. shot volume: 200 cm3 Clamping force: 80 t Max. distance between tie bars: 410 mm Min. mould height: 250 mm Max. distance between plates: 725 mm Dimensions: 1,000 x 3,395 x 1,995 mm (L x W x H) Weight: 3,250 kg Options • Core pull • Including Procan control system • High wear-resistant 42 mm screw and cylinder • Colour contact (potential-free max. 5A) • Signal control for colouring

Condition: excellent (used), mileage: 876,343 km, power: 599 kW (814.41 HP), first registration: 10/1999, fuel type: diesel, number of seats: 31, gearing type: mechanical, axle configuration: 4x2, emission class: euro2, suspension: steel-air, tire size: 215/75 R17.5, total length: 8,100 mm, total width: 2,300 mm, total height: 2,850 mm, Year of construction: 1999, Equipment: ABS, air conditioning, = Additional options and accessories = - Radio/CD player = Notes = Iedpfx Aewdnc Ieddjal TRANSPORT TO ANTWERP 590 EURO = Additional information = Number of doors: 3 Transmission: 6-speed, manual Tyre size: 215/75 R17.5 Front axle: Steered; Suspension: Leaf spring Rear axle: Twin tyres; Suspension: Air suspension Unladen weight: 5,100 kg Technical condition: very good Optical condition: very good Reference number: 7

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 2,400 bar, warehouse no.: 503653 manufacturer: ENGEL type: e-max 200-50 controller: year of construction: 2011 clamping force: 500 kN distance between tie-bars h x v: 370 x 320 mm size of mould plates h x v: 520 x 470 mm min. mould height: 150 mm max. mould height: 350 mm max. open daylight: 610 mm opening stroke: 260 mm screw diameter: 25 mm swept volume: 59 ccm injection pressure: 2400 bar Iaedpfx Aex R Sm Doddel equipment included screen text german CEE-socket 16A air valve 1x machine without material hopper machine without hopper loader Anti vibration mounts interface robot EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 3.7m x 1.32m x 1.8m total weight: 3400KG

Condition: used, Year of construction: 2006, operating hours: 64,000 h, functionality: fully functional, machine/vehicle number: 200084, clamping force: 2,200 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 474 cm³, injection weight: 434 g, mold height (min.): 400 mm, opening stroke: 1,050 mm, overall weight: 8,500 kg, heating capacity: 14.9 kW (20.26 HP), pump power: 45,100 W, power: 60 kW (81.58 HP), input voltage: 400 V, Equipment: documentation/manual, CS series - LCD color screen - Selogica control system - Technology level 2 servo-driven with 2 variable displacement pumps - High wear-resistant plasticizing unit - Electric and hydraulic control of NVD in the mold for the 1st injection unit - Minimum installation height extended to 400 mm - Connection for air blow-off unit 1 - Core pull 1 - Core pull 2 - Injection pressure increased by 10% - HHG interface according to EUROMAP 67, 50-pin - Extended robot interface (EUROMAP 12 and 67) - Temperature control unit interface - Serial printer interface V24 - PC keyboard interface - Post-pressure switching channel 1 on the moving mold platen - Interface for color separation units - 6 manually adjustable free cooling circuits - Arburg equipment package 1,2,3,5,6,7 Iajdpfx Aex Td Apeddjl - Injection control - Ejector plate locking connection - Centering diameter 175 mm through the moving clamping plate Completely overhauled by Makutec in 2020. In operation until CW2/2026.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 199479, clamping force: 250 kN, screw diameter: 30 mm, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 270U 250-170 injection moulding machine. Fitted with a Selogica controller. This machine is the four tie bar variant with good size platens for maximum versatility from a small clamp machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Iodpjx U Ax Eefx Addeal Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team.

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements height 405 mm Dimensions Machine Length 405 mm Clamping Unit Clamping force 800 kN This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine. Iasdpfx Adex D Ea Iodsl Application Types Injection Moulding

Year of construction: 2011, condition: good (used), Brand: Babyplast Iedpfxsx Rzbwo Addoal Model: 6/10P Year of manufacture: 2011

Condition: excellent (used), mileage: 259,937 km, power: 400 kW (543.85 HP), first registration: 03/1999, fuel type: diesel, tire size: 315/80 R22,5, axle configuration: 6x2, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: other, loading space length: 7,300 mm, loading space width: 2,440 mm, loading space height: 2,570 mm, Year of construction: 1999, Equipment: ABS, air conditioning, electric window regulation, power assisted steering, = Additional options and equipment = - Radio/CD player - Sleeper cab Iedpfxsxvlvas Addjal = Notes = TRANSPORT TO ANTWERP 590 EURO = Further information = Axle configuration Tyre size: 315/80 R22.5 Front axle: Steered; Suspension: Parabolic suspension Rear axle 1: Twin tyres; Suspension: Air suspension Rear axle 2: Suspension: Air suspension Weights Unladen weight: 12,125 kg Payload: 13,875 kg Gross vehicle weight: 26,000 kg Condition Technical condition: very good Visual condition: very good Identification Reference number: 87

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive Isdpex Rx Eyefx Addoal wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 17,300 h, A used cooling unit from the Swiss manufacturer TOOL TEMP AG Iodox Tr I Hopfx Addeal Model: TT 54000 Year of manufacture: 2008 Operating hours: 17,300 Location: Upper Franconia _____ Our general terms and conditions apply. The seller is not liable for any typing or data transmission errors. All details and photos have been provided by the owner and released for publication. The appearance of the listed items corresponds to their age and the images shown. The condition of the technology and wear is appropriate for the age of the items. Used machinery is sold exclusively to commercial customers and without any warranty.

Condition: refurbished (used), operating hours: 42,000 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 2,430 mm, total width: 810 mm, total height: 1,620 mm, Our team are currently working on the refurbishment of this BOY 22M injection moulding machine. This machine is fitted with a 24mm screw. BOY machines are very popular due to their small footprint. Any machines awaiting or undergoing refurbishment by us can be reserved with a 10% deposit. As this machine is already underway, you can expect this machine to be fully refurbished by our in-house experts within a matter of weeks. Isdpfsx U Axfjx Addsal Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 22M which is very similar to the BOY 22M machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 201812185055532, Haitian Model / Type: JU8500 II Injection unit: 10600 Year of manufacture: 2018 Serial no.: 201812185055532 Connected load: 157 kW Clamping unit Clamping force: 1850 ton Tie bar spacing (H x V): 1650 x 1550 mm Min. mould height: 500 mm (750–150–100) Max. mould height: 1450 mm (1600–150) Centre ring adapter plate: 175 mm Core pulls: 4 Ejector Ejector force: 450 kN Injection unit Theoretical max. injection volume: 5227 cm³ Max. specific injection pressure: 2030 bar Screw diameter: 110 mm Screw type: Conventional, with mixing section Screw speed: 0–120 rpm Min. screw speed: 10.9 rpm Plasticising capacity (PS): 255 kg/h L/D ratio: 20 (reduced) Nozzle radius: R39 Hydraulic / oil Oil tank capacity: 1560 litres Nozzle / bedplate Nozzle through-hole in bedplate: 100 mm Nozzle bore: 6 mm Weight & dimensions Machine weight: 94,000 kg Overall dimensions (L x W x H): 1450 x 965 x 360 cm Included Control system included Platforms and stairs included Safety crash protection included Product weights (reference) Min. shot weight (1/2D): 533 g 1D: 1066 g Iasdpfxsx Stgus Addjl 2D: 2133 g Max. shot weight (3D): 3199 g Note Motan vacuum conveyor with cyclone separator not included; it must be dismantled and left on site.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 678 cm³, injection pressure: 2.007 bar, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, installation height: 330 mm, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 1,150 mm, Equipment: documentation/manual, warehouse no.: 503393 manufacturer: KRAUSS MAFFEI type: KM 300-1400 CX controller: MC5 year of construction: 2011 clamping force: 3000 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm Iaodpsx Rx Emefx Addol opening stroke: 820 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included screen text german CEE-socket 16A pressure accumulator for uprated injection speed Handling without safety fencing core pulling hydraulically 2x machine incl. Handling machine without material hopper Anti vibration mounts interface EUROMAP 67 interface for handling Schuko-socket 10A measures & weight measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG technical data robot-system handling type: Linear manufacture: Wittmann controller: W 833 year of construction: 2011 handling weight: 10 kg X axis: 900 mm Y axis: 1800 mm Z axis: 3000 mm B axis rotationn: 180 ° C axis rotation: 90 ° screen-text: deutsch total weight: 560 kg

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Isdsl Tnz Eepfx Addeal Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 201712075033692, Haitian Model / Type: JU7500/2 Plus Year of manufacture: 2018 Serial no.: 201712075033692 Clamping unit Clamping force: 750 ton Opening stroke: 900 mm Max. daylight: 2050 mm Tie bar spacing (H x V): 1110 x 960 mm Platen size: 1510 x 1440 mm Centre ring diameter: 200 mm Centre ring adapter plate: 175 mm Min. mould height: 450 mm Max. mould height: 1150 mm Open distance (open loopweg): 2050 mm Ejector Ejector stroke: 300 mm Ejector force: 195 kN Injection unit Theoretical max. injection volume: 2262 cm³ Max. shot weight in PS: 2058 g Max. specific injection pressure: 2200 bar Injection stroke: 450 mm Screw diameter: 80 mm Screw type: Conventional, with mixing section Screw speed: 0–145 rpm Min. screw speed: 15 rpm Plasticising capacity (PS): 255 kg/h Cylinder type: 5000 Hydraulic / electrical Hydraulic pressure: 210 bar Oil tank capacity: 1000 litres Power supply: 400 V Installed power: 86 kW Nozzle / bedplate Nozzle radius: R39 Nozzle through-hole in bedplate: 100 mm Iajdex Stfwjpfx Addsl Nozzle bore: 6 mm Weight & dimensions Machine weight: 32 ton Overall dimensions (L x W x H): 970 x 510 x 270 cm Included Control system included Platform and stairs included Safety crash protection included Product weights (reference) Min. shot weight (1/2D): 205 g 1D: 410 g 2D: 820 g Max. shot weight (3D): 1230 g Note: Motan vacuum conveyor with cyclone separator not included; it must be dismantled and left on site.

Condition: good (used), Year of construction: 2007, operating hours: 30,056 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 1.86 bar, ejector force: 22,000 N, ejector stroke: 150 mm, plate length: 770 mm, plate width: 745 mm, installation height: 300 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 7,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, warehouse no.: 503471 manufacturer: KRAUSS MAFFEI type: KM 100-380 CX controller: MC5 year of construction: 2007 operation hours: 30056 h clamping force: 1000 kN Iodpfxex Rx Ege Addeal distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 745 x 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm screw diameter: 40 mm swept volume: 201 ccm injection pressure: 1860 bar equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine with material hopper machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 4.7m x 1.7m x 2.25m total weight: 7800KG

Condition: good (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 280 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,065 bar, total length: 3,200 mm, total width: 1,350 mm, total height: 1,850 mm, overall weight: 2,900 kg, Equipment: documentation/manual, warehouse no.: 503562 manufacturer: ENGEL type: Victory 200-28 Tech controller: CC200 year of construction: 2011 clamping force: 280 kN size of mould plates h x v: 500 x 400 mm min. mould height: 150 mm max. open daylight: 550 mm opening stroke: 400 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor LxW: 2800mm x 350mm Discharge height: 950mm Speed: 9m/min machine incl. Handling machine incl. water flow regulator Anti vibration mounts interface for ejector plates safety interface for temperature control units Schuko-socket 10A selection unit measures of machine l x w x h: 4.4m x 1.9m x 2.1m total weight: 2900KG technical data robot-system Iaodex Rx Eaopfx Addjl handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 electric cabinet dimensions: 1,00m x 0,35m x 0,64m

Condition: excellent (used), Year of construction: 2008, operating hours: 17,745 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, total length: 2,300 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 14,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503469 manufacturer: KRAUSS MAFFEI type: KM 250-2000 CX controller: MC5 year of construction: 2008 operation hours: 17745 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm Iaodpfx Ajx Rx Dpeddol min. mould height: 330 mm max. open daylight: 1170 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 6.7m x 2.2m x 2.3m total weight: 14500KG technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LR 150 - 1577 X axis: 900 mm Y axis: 1400 mm Z axis: 2000 mm total weight: 395 kg

Condition: excellent (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, input frequency: 50 Hz, input voltage: 400 V, clear span: 1,150 mm, Equipment: documentation/manual, warehouse no.: 503469 manufacturer: KRAUSS MAFFEI type: KM 250-2000 CX controller: MC5 year of construction: 2008 operation hours: 17745 h clamping force: 2500 kN Iasdpfox Rx A Sex Addel distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1170 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. robot-system machine incl. safety fencing machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 6.7m x 2.2m x 2.3m total weight: 14500KG technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LR 150 - 1577 X axis: 900 mm Y axis: 1400 mm Z axis: 2000 mm total weight: 395 kg

Condition: good (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1.904 bar, ejector force: 33,000 N, ejector stroke: 150 mm, plate length: 660 mm, plate width: 710 mm, installation height: 200 mm, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, type of input current: three-phase, clear span: 1,050 mm, warehouse no.: 503156 manufacturer: KRAUSS MAFFEI type: KM 160-1000 PX controller: MC6 Isdpfx Ajx Rxzuoddjal year of construction: 2018 operation hours: 9585 h clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included: screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG