Used Board Coating Machine for sale (89,024)

Condition: used, Board pack aligner consists of two parts, that is attached together Part 1 - Length 5.6 m - Width 2.6 m - Height 430 mm - Electric motor 2.2 kW Part 2 - Length 2.4 m - Width 2.36m - Height 430 mm Hnodpfx Adjhc Ridjdjg - Electric motor 1.5 kW

Condition: used, Length: 7,5 m Electric motor: 1,1 kW each rail Hjdpfx Adsmrzthedsng Chain conveyor for board packs - Length: 7,5 m, - Electric motor: 1,1 kW (each rail).

Condition: good (used), Endoline 221 case erecting machine, can handle cases between 200-500mm length, 150-400mm width and 175-600mm height at up to 16 cases per minute as standard. Hnodpfsu S R Avjx Addeg

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, overall weight: 8,200 kg, total height: 2,130 mm, total length: 3,320 mm, total width: 2,440 mm, space requirement width: 2,440 mm, input current: 30 A, input frequency: 50 Hz, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Hodox Hzm Sepfx Addsng

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 250 mm, pass-through width: 250 mm, overall weight: 650 kg, The Ceetec A250 is a medium-sized unit from the series of coating machines and is therefore ideally suited for use in industrial and production facilities, such as paint shops, joineries, sawmills or building supply stores offering facade boards, decking, soffits, structural timber, etc. The device is most commonly used in manual mode, which means that the workpieces are loaded and unloaded by hand. Wooden components are conveyed horizontally through the machine by an automatic feed system. The Ceetec A250 ensures high-quality finishing thanks to its eight rotating brushes, each of which can be individually adjusted. Excess paint recirculates in a closed-loop system through a filter and back into the tank. The closed-loop circuit ensures optimal paint usage. The unit is supplied complete with brushes and a bag filter, making it ready for operation after connecting to a power source. The Ceetec A250 is a standard model, which means it is typically in stock and can usually be delivered at short notice. Brush coaters of the A-series are easy to keep clean. Consumable parts that naturally wear out are stocked in our warehouses, ensuring availability and fast delivery times. Thanks to the modular design of the machines, the operator can handle the replacement of most parts independently. The machine can be additionally equipped with a variety of brushes, bag filters with different mesh sizes, roller tables, and paint trolleys, among others. For processing raw wood, it is recommended to install a cleaning unit to remove dust and shavings before the machine. The device is intended for use with water-based products. ADVANTAGES OF CEETEC A250: Independent adjustment of brush heads Application system using low-pressure nozzles and distributing brushes on all four sides of the workpiece Closed-circuit operation enabling recovery and reuse of excess preservatives Adjustable feed speed Can be equipped with a unit for handling short elements (from 800mm) Option to fit a 2m roller table at the machine infeed and outfeed Basic working parameters: Hodpfsxhc Tmox Addsng Speed: from 18 m/min to 42 m/min Workpiece dimensions: Max. H: 250 mm x W: 250 mm. L: Min. 2000 mm. (other sizes available!) Power supply: 3 x 380 V + PE IP. Class 54 Machine dimensions: 2450 mm x 1200 mm x 2000 mm (height) Net weight: approx. 600 kg

Condition: refurbished (used), Rovema SPA end packaging machine for wraparound for with long flaps and with short flaps Hnedsx Ag Ukjpfx Addsg

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 410798, type of input current: three-phase, The Kraft VPS100/1500 is a high-precision, fully automatic carton cutting machine designed for flexible and efficient production of shipping and protective packaging from continuous corrugated board – ideal for companies with a wide range of small batch series or on-demand production. Its patented multi-tool system allows for creasing, perforating, and cutting in a single pass, both longitudinally via the processing roller and transversely via the integrated cutting bar. 🎛 Processing & Tools 6× multifunction tools for longitudinal processing 1× multifunction tool for transversal processing Creases are applied gently using creasing skids – reduces carton cracking Perforation via oscillating cutting knife, intensity adjustable Cutting with a serrated knife on a rubberized roller → low-fiber, tactile cut edge Hjdpfx Asx Emguoddsng ⚙ Drive & Mechanics Maintenance-free, high-dynamic linear drives for precise feed Segmented top pressure for reliable carton feed 2 rubberized rollers as counter-cut and transport medium 📐 Technical Specifications Max. working width: 1,500 mm Min. working length: 380 mm Board thickness: min. 1.5 mm (E-flute 1.3) max. 7.0 mm (BC-flute 2.7) Tool width: approx. 45 mm ➕ Carton Feed (Feed Stand) Max. stack height: 2,100 mm + 120 mm pallet Max. feed rate: 100 m/min Min. web width: 300 mm Max. web width (VPS 1500): 1,500 mm Total width "side by side": max. 1,350 mm 💻 Control & Software Hardware BECKHOFF industrial PC C6930 (Intel® Core™ i5-7500T, 2.7 GHz, 4 cores) 16 GB RAM, 240 GB SSD Windows 10 IoT Enterprise 21" multi-touch panel Control cabinet integrated into base machine Software features Multi-stage cut optimization Dynamic tool management Bidirectional multi-line processing User management (user, service, admin, Kraft) Comprehensive production, carton, and design management Message statistics, manufacturer documentation, training videos, service portal, etc. Documentation Operating manual in local language Circuit diagrams in German or English Spare parts drawings Other Equipment Standard interface for barcode scanner, file import (XML), database import Control panel mounted on swing arm, left side 🔄 Setup Times & Performance Changeover time with automatic carton changer: approx. 4.5 seconds Tool repositioning only: approx. 2.5 seconds The machine is delivered with multiple FEFCO formats and is production-ready immediately (e.g. 0201, 0331, 0403, 0410, 0412, 0421, 0401 incl. perforation) 🚚 Assembly, Transport & Year of Manufacture Demo and test machine year of manufacture 2019 Single-shift operation since 2022 Dismantling, packaging and delivery handled by seller Unloading requires 3.5-ton forklift with long forks 🎨 Colour Scheme Base machine: RAL 7015 (Slate Grey) & RAL 7035 (Light Grey) Safety fence: RAL 7015 Safety fence posts: RAL 7035 💡 Key Advantages of this Machine Very short setup times → ideal for flexible packaging production Low-fiber cut edges → reduced risk of injury & improved appearance Intuitive user interface Fully automatic, high-precision operation Immediately ready for use with included design templates Low-maintenance linear drives High process stability due to segmented top pressure

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 571120240869, Lightly used: Edda CNC carton cutting machine Very neat machine, offered for sale due to a change in production. The machine can be seen in operation on site and is still in use. Site visits and demonstrations are possible! See the video for machine operation. Fully automatic, self-adjusting knives, equipped with 11 longitudinal knives and 1 cross-cutting knife. Ideal machine for custom packaging of parts to be shipped. Machine is equipped with TPA control system, very user-friendly. Feed module for fanfold carton is present. Price ex works Staphorst. Hedpfx Adjxw R Ukjdjng

Condition: excellent (used), Endoline Carton Erector Hnedsv Tywwjpfx Addjg Model 221 With bottom taper Serial number: 051235542 415 V, 3 Ph, 50 Hz Dimensions carton erector: 1850 mm x 1850 mm x 2150 mm Including outfeed roller conveyor, roller width: 400 mm Dimensions roller conveyor: 1750 mm x 800 mm x 550 mm.

Condition: good (used), Year of construction: 2018, MG Tech Leanbox Case former Serial: HO2859 Hnjdpfswxlm Hox Addjg 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 21-2584 BE ATS, type of input current: three-phase, total height: 1,680 mm, input voltage: 400 V, total width: 2,950 mm, total length: 1,800 mm, compressed air connection: 6 bar, air demand: 38 m³/h, For sale: SOCO PACK BE-2200 ATS (RIGHT) Automatic Cartoning Machine High-speed automatic case erector with bottom sealing unit and conveyor Basic Information: Model: SOCO BE-2200 ATS RIGHT Type: Automatic case erector with bottom tape sealing Version: Right-hand (RIGHT) with CE-compliant safety cover Condition: New / excellent, ready for immediate operation Location: EXW Prešov, Slovakia Technical Specifications: Capacity: High-speed operation – suitable for fully automated lines Power supply: 3 x 400 V AC, 50 Hz, 0.5 kW Air consumption: 38 l/cycle, min. 6 bar Discharge height: Adjustable: 560 – 850 mm Pneumatic components: FESTO Control system: Siemens S7-1200 PLC with touchscreen and Ethernet connection Operating languages: English, German, Slovak Features and Equipment: Automatic bottom case taping Horizontal motorized carton magazine (length 1500 mm, capacity approx. 190 cartons) Magazine adjustment via counter and handwheel – quick changeover for formats Touchscreen control panel with cycle counter, alarms, demo mode End-of-conveyor safety sensors with alarm A-60 pneumatic stop system + powered roller conveyor (1230 mm, height 490–700 mm, speed 20 m/min) Color: RAL 9006 (aluminum grey, powder-coated finish) Hnedex Ryvajpfx Addog Accessories: Extension kit for HOREC 0.5 L and 0.7 L cartons Brush for feeding square cartons Vacuum suction heads (2 pcs) – cover full range of required dimensions Bottom flap spreader – suitable for thin or 5-ply cartons Tape monitoring sensor (optional): detects empty roll, tape break or misapplication

Condition: like new (used), Year of construction: 2017, Nordson Durablue 4F hotmelt glue unit suitable for up to 6 hose connections. This unit is equipped with a gear pump, unlike a (double-acting) plunger pump, this has no so-called dead stroke. This makes the unit very suitable for constant glue assignments where an even glue dosage is important. The glue unit has been completely cleaned internally and externally by us, tested and is fully functional. Hnodpfx Adjvupz Iodsg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 42,280 h, functionality: fully functional, machine/vehicle number: SH1239, feed length X-axis: 700 mm, feed length Y-axis: 400 mm, year of last overhaul: 2025, Equipment: documentation/manual, Large working area: 700 x 400 mm Hodpoxt Rkksfx Addsng Torsion-resistant welded steel frame Highly dynamic linear motor axes Quick product changeover possible Flexible PCB holding systems Separation process with rotary cutting tool Cuts any type of PCB material

Condition: ready for operation (used), Year of construction: 1993, A+F cartoner available. Packaging capacity: approx. 25cycles/min, carton length range: 200mm-800mm, carton width range: 150mm-600mm, carton height: 300mm, product diameter: 95mm, max. product height: 300mm. Machine dimensions X/Y/Z: approx. 4000mm/2000mm/2200mm, weight: approx. 3000kg, control system: Siemens S5. Documentation available. An on-site inspection is possible. Hodpfx Aexuvp Ioddjng

Condition: excellent (used), Year of construction: 2012, Flexographic printer 1 color by HMB Mikolow, printing field 2300/1600. Feeding by vacuum from the format stack. Hnodpfx Adsvb Ht Usdeg

Condition: like new (used), Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: N1500796, type of input current: three-phase, total height: 1,800 mm, input voltage: 400 V, total width: 1,000 mm, total length: 1,400 mm, overall weight: 200 kg, working height: 1,800 mm, compressed air connection: 8 bar, air demand: 10 m³/h, input current: 16 A, air pressure: 8 bar, working width: 500 mm, input frequency: 50 Hz, infeed height: 500 mm, AS GOOD AS NEW CYKLOP BOXCLOSER CLOSES VARIABLE SIZED BOXES WITHOUT ADJUSTMENTS BY HAND. SO ONE BOX CAN BE 300X300MM AND THE NEXT CAN BE 500X500MM AND SO ON. NEEDS 16A 5 POLE AND COMPRESSED AIR. TESTED AND SERVICED. Hnodpfswd Tc Tex Addog

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total length: 2,150 mm, total width: 1,000 mm, total height: 1,550 mm, type of input current: three-phase, overall weight: 700 kg, workpiece weight (max.): 500 kg, input voltage: 400 V, feed rate X-axis: 30 m/min, conveyor belt width: 400 mm, power: 2 kW (2.72 HP), input frequency: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. The SA380 brush sanding machine offers the following advantages: 1. Flexible: All profiles, including beams up to 400 mm wide and 260 mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction system 3. Powerful: Automatic feed of 13–30 m/min ensures high throughput Hodpfsw Av Ivjx Addeng 4. Top results: 8 axes with flexible Fladder brushes deliver a perfect finish: 4 sand WITH and 4 sand AGAINST the feed direction (on 4 sides, 2 per side) 5. Safe: Completely enclosed design, requiring only a single 120 mm dust extraction connection The SA250 and SA380 are built to be extremely robust and are manufactured entirely in Denmark. We currently have two demonstration machines in stock.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, UES Perfectmelt hotmelt glue unit equipped with 4 hose connections and an automatic filling system (glue granules). This glue unit is compatible with Nordson (Ni120) due to the hose connections and the plugs on the glue hoses. UES AG is a supplier of (German) quality machines (hotmelt). They supply systems that can be connected to your existing glue equipment, in this case Nordson. Hnodpevt A Sqjfx Addeg This unit was tested for a short time at a customer and is in perfect condition.

Condition: good (used), Year of construction: 2007, Max. pane height: 2700 mm. Connected load: 400V AC/50Hz/3.1A Total length with inlet and outlet: approx. 7700 mm. Max. height: approx. 4200 mm. Weight: 2550 kg. Condition: good, second-hand. Hnjdpfx Ajxq Rp Isddog

Condition: ready for operation (used), Year of construction: 1998, A cup cartoner Ammann is available. Cup type: 95mm cup, max. cup diameter: 95mm, carton dimensions X/Y: 470mm/330mm, configuration: 3x6, packaging capacity: approx. 15000cups/h. Machine dimensions: approx. 2500mm/2500mm/2400mm, weight: approx. 1700kg. The machine was rebuilt in 2008. An on-site inspection is possible. Hsdpexuvpuefx Addsng

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), nominal power: 7.5 kW (10.20 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,600 rpm, input frequency: 50 Hz, input current: 30 A, type of input current: three-phase, overall weight: 8,200 kg, total length: 3,320 mm, total width: 2,440 mm, total height: 2,130 mm, grump will follow shortly Hnsdpfx Adowvbm Rodeg

Condition: used, Year of construction: 2001, functionality: fully functional, OLI CASE PACKER, MODEL OLI 210/OLIMAT 2P Small automatic case packer with small footprint. Built in 2001, with full documentation. Composed of 2 modules: OLI 210 (for products in feeding, staking and introduction) and OLIMAT 2P (for case-shaping, closing and out feeding). CHARACTERISTICS - PLC: TSX - Panel command : MAGELIS - Incoterm: EXW PRODUCTION - Max speed: 20 cases/mn (160 cartons/mn) - Cases format range: 100 x 60 x 100 mm (min); 500 x 340 x 400 mm (max) Hnodpfxsxzum Eo Addjg - Product entry height: 900 mm - Product exit height: 1100 mm DIMENSIONS - Size: 4700 x 1600 x 2000 mm (approximately) ENERGY CONSUMPTION - Power: 5 KVA, 3 x 400 V/N/PE - Operating pressure: 6 bar

Condition: used, Straightening machine, strip straightening device with adjustable LENZE geared motor Straightening machine, strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a classical straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, stepless Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz - Pull roller pair, drive of the lower rubber-coated roller via open gear drive - Speed infinitely adjustable via handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit not driven) - On a sturdy metal base - Straightening machine was used for cardboard approx. 350 x 1.5 mm Hnjdpfedzp U Aox Addeg Space requirement (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Condition: ready for operation (used), Year of construction: 2016, A fully automatic packaging system for jars with upstream carton erecting unit (wrap-around trays) including automatic product mixing of offline products is available. Example of mixed formats: 6-3-3/4-4-4/5-4-3/8-2-2/10-2, max. packaging capacity: 280 jars/min, max. carton erecting capacity: 2.3 cartons/min, mold changeover time: approx. 15min, overall system dimensions X/Y: approx. 16600mm/5800mm, weight of carton erector/packaging unit: approx. 1200kg/7500kg, operating hours: approx. 5000h. Documentation available. On-site inspection is possible. Expected to be available from mid/end of July 2025. Hnedpfxswn H U Ds Addog

Condition: ready for operation (used), Year of construction: 2009, Packaging capacity: 100 cups/min, packaging schemes: 2x3x2/2x5x2, product formats X/Y/Z: 41mm/133mm/98mm, max. product tolerance: +/-1.5mm, infeed and outfeed height: 860mm/1060mm, infeed and outfeed adjustment: +/-50mm, operating hours: 64016h. Documentation available. On-site inspection is possible. Hnedpjwqqv Refx Addjg