Used Boehringer Dus 560 Ti for sale (80)

Condition: used, Year of construction: 2003, turning diameter 570 mm turning length 1500 mm control Manual Plus 4110 Heidenhain clamping length max. 1800 mm swing diameter over face slide 365 mm Lhslhsvylgdjccqpjg face travel 345 mm upper slide 125 mm centre height 280 mm drive of main spindle 21/18 kW spindle bore 62 mm spindle head DIN 55027 Gr.8 torque 2000/1700 Nm turning speed range - power take off spindle 5-2.500 U/min feed range - long. and cross 0,01-50 mm/min rapid traverse cross 5 m/min rapid traverse longitudinal 10 mm/min workpiece weight flying clamped 400 kg dimension of workpiece 1600 mm total power requirement 35 kva weight of the machine ca. 5,3 t dimensions of the machine ca. 4,3x2,3x2 m Attention!!! The machine will be delivered with Multifix as a tool holder and not with Capto as shown. three-jaw chuck steady-rest

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens SINUMERIK 810D weight of the machine ca. 5,2 t dimensions of the machine ca. 6648 x 2735 x 1973 mm Additional information Centre height 570 mm Centre height over flat track 280 mm Diameter over bed 570 mm Lhslhccowi Nfnjqpsg Diameter over cross slide 365 mm x-axis 345mm x-axis feed max. 2500 mm/min z-axis feed max. 5000 mm/min x-axis rapid traverse max. 5000 mm/min z-axis rapid traverse max. 10000 mm/min x-axis feed force 7,100 N z-axis feed force 12500 N Feed control 0% - 120% max. workpiece weight from front edge of clamping device 400 kg with tailstock 1000 kg with tailstock and 1 steady rest 1300 kg with tailstock and 2 steady rests 1600 kg Main spindle: Spindle / bore / spindle Ø in the front bearing DIN 52027 - A 8 / Ø62 / Ø100 Inner taper of the main spindle metric 70 Drive power 25 kW 60%; 20 kW 100% ED Torque max. 1800 Nm / 1400 Nm 2 gear stages Speed range 3-2500 rpm Speed range gear step 1: 3-500 rpm Speed range gear step 2: 15-2500 rpm Tool: SAUTER 8-station turret: Ø40 Turret no.: 0.5.480.516-089768 ComNo. 06.09216 Tool holders DIN 69880 / Ø50 Lathe tool - cross-section according to DIN 770 h x w 32 x 25 Tailstock: Quill diameter 100 mm Inner taper quill MK 5 Quill travel 190 mm Cooling: frequency controlled 1 bar/10 ltr - 4 bar/20 ltr; 2-stage programmable Dimensions: max. machine size (without chip conveyor) 4300 x 2131 x 1973 mm Space requirement (incl. chip conveyor) 6648 x 2735 x 1973 mm Accessories: 3-jaw chuck, diameter 250 mm chip conveyor, make KNOLL, built 2015 fixed steady rest moving steady rest various tool holders

Year of construction: 2001, operating hours: 26,400 h, Condition: ready for operation (used), Control Unit Brand SIEMENS Model 810 D powerline Additional Equipment Thread pitches: Metric threads (longitudinal, flat, and tapered) mm 0.1-400 Ljlhccowf Sm Hoqpjhg This BOEHRINGER VDF DUS 560 ti was manufactured in 2001. A robust horizontal turning machine, it's ideal for training purposes. If you are looking to get high quality turning capabilities consider the BOEHRINGER VDF DUS 560 ti machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 1,500 mm, turning diameter: 570 mm, center width: 1,500 mm, turning diameter over bed slide: 570 mm, swing diameter over cross slide: 365 mm, turning diameter over top slide: 365 mm, quill stroke: 190 mm, quill diameter: 80 mm, quill travel distance: 190 mm, center height: 280 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, swing diameter over bed slide: 365 mm, spindle speed (max.): 2,500 rpm, center height over cross slide: 183 mm, feed length X-axis: 345 mm, feed length Z-axis: 1,160 mm, total length: 4,000 mm, total width: 2,000 mm, VDF Universal Centre Lathe DUS 560 ti with programmable cycles ex works Austrian machining factory with top maintenance Last maintenance service in 2024 New Filter in 2023 Manufacturer: VDF BÖHRINGER Werkzeugmaschinen GmbH Göppingen Type: DUS 560 ti Year of manufacture: 1999 Installation date: 2003 Technical Specifications Working area Maximum swing over bed: 570 mm Maximum swing over support: 365 mm Maximum turning length: 1500 mm Centre height above flat bed: 280 mm Maximum workpiece weight: 400 / 1000 kg Maximum workpiece clamping length: 1300 mm Main spindle Spindle nose according to DIN 55027, size 8, internal taper 70 Spindle bore: 62 mm Spindle diameter at front bearing: 100 mm Spindle through-hole depth: 200 mm Maximum chuck diameter: 315 mm Speed range: 3 to 2500 rpm Maximum faceplate diameter: 560 mm Maximum faceplate speed: 700 rpm Maximum torque: 1800 Nm Support Z-axis travel: 1160 mm X-axis travel: 345 mm Tool system: Parat-3 Tool cross-section (DIN 770): 32 x 25 mm Tailstock Tailstock adjustment: manual Quill taper: MK5 Quill diameter: 80 mm Quill stroke: 190 mm Control and equipment Control: SINUMERIK 810 D 32-bit processor, digital control ManualTurn with cycle support 10.4" colour LCD display Operating manual: 094.0003.1330-00 Lhslhcewb E U Nocqpjg Three-jaw chuck: 315 mm Faceplate: 350 mm (up to 560 mm with thin parts) Tool turret size 3, Parat, 4-position, manually rotatable (4 x 90°) Chip conveyor from BÜRENER Maschinenfabrik Especially suitable for radius turning

Condition: used, Year of construction: 2001, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens Sinumerik 810 D spindle bore 62 mm spindle turning speed - stepless 3 - 2500 U/min Ljlswi Nd Dshccqpshg transmission ratio 2 feeds - longitudinal max. 10000 mm/min feeds - cross max. 5000 mm/min tailstock quill taper MT 5 main drive motor 20/30 kW Dimensions (LxWxH) 4,10 x 2,16 x 1,98 m total power requirement 35 kVA weight of the machine ca. 5,3 t Additional information The machine was used in 1-shift operation. Equipment/accessories: * CNC control SIEMENS Sinumerik 810 D * Tool/swivelling holder Parat size 3, Sandvik Capto C4 * Boring rest * Full clamping cylinder Forkardt OKRJ 120 for operating power chucks * Hydraulic unit Hydac * Steady-rest, diameter 20-315 mm * 3-jaw manual chuck, diameter 315 mm * Coolant device * Chip conveyor

Condition: excellent (used), Year of construction: 2002, Cycle lathes VDF Boehringer Lhslhccoun Rt Uoqpeg Type DUS 560i year of construction 2002 Center height 280 mm Center distance 2000 mm Turning diameter over bed 570 mm Turning diameter over support 365 mm Control system Sinumerik SIEMENS Bed width 360 mm Spindle bore 62 mm Speed range 3 - 2500 rpm Feed rate: 5000 mm/min Rapid traverse - longitudinal/plane 10 / 5 m/min Quick-change holder Parat Drive power - spindle motor 19 / 15 kW Mounting taper in the tailstock quill MK 5 Quill diameter 80 mm Quill stroke 190 mm Coolant device

Condition: used, Year of construction: 1999, turning diameter 570 mm turning length 2340 mm control SIN 840 D turning diameter over slide rest 345 mm Lhslovxwmashccqpsg spindle head DIN 55027 - Size 8 spindle bore 62 mm tailstock quill taper MT 5 spindle turning speed range 3 - 2.500 U/min total power requirement 35 kW weight of the machine ca. 5,60 t dimensions of the machine ca. 4,85 x 2,10 x 2,00 m extended machine bed steady rest chip tray coolant device 4-jaw chuck

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 2022.3781-03, turning diameter over cross slide: 365 mm, turning length: 4,000 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens Sinumerik 810 D, TECHNICAL DETAILS Turning length: 4000 mm Swing over bed: 570 mm Lhelhccev R Hamjqpeg Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section: max. 20 x 20 mm Faceplate diameter: 560 mm Chuck diameter: 250 - 315 mm according to VDF 6025 Control: SINUMERIK 810 D with screen Workpiece weight with tailstock: max. 1000 kg Workpiece weight with tailstock and 2 steady rests: max. 1600 kg Main spindle Spindle head according to DIN 55 027: Size 8 Spindle diameter in the front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Main Drive Motor type: Continuously variable three-phase AC motor Drive power (60% / 100% duty cycle): 25/20 kW Maximum torque (60% / 100% duty cycle): 1,800/1,400 Nm Total speed range: 3 - 2,500 rpm (2-stage) Constant cutting speed: 1 - 9,999 m/min Feed drives Drive type: Three-phase servo drives (AC motor) Transverse and longitudinal feed range: 0.01-50 mm/rev Max. feed rate (rapid traverse): 5 m/min Conventional rapid traverse, transverse: 2.5 m/min Max. longitudinal feed rate (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Transverse feed force: 7,100 N Longitudinal feed force: 12,500 N Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Quill inner taper: MT 5 Tip angle, standard: 60° Thread pitch: 0.1 - 2,000 mm MACHINE DETAILS Floor space required: 6.83 x 2.16 m Machine height: 1.98 m Weight: 7,200 kg Total power consumption: 35 kVA EQUIPMENT - Sauter 8-station disc turret - Fixed steady rest - 8 cylindrical shank adapters - Coolant pump - Lubrication pump - Machine stand - Transport base - Main spindle brake - Operating instructions and circuit diagrams

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 2002.1023-01, turning diameter: 420 mm, center width: 1,200 mm, center height: 210 mm, spindle speed (max.): 3,000 rpm, controller model: Siemens Sinumerik 840, Extensive accessory package included! Ljlewa Rnfshccqpohg TECHNICAL DETAILS Turning diameter: 420 mm Center distance: 1,200 mm Spindle bore: 51 mm Speed: max. 3,000 rpm Center height: 210 mm Control: Siemens Sinumerik 840 MACHINE DETAILS Dimensions (L x W x H): 2,700 x 1,300 x 1,800 mm Weight: approx. 3,500 kg Power supply: 400 V - 3 AV - 50 Hz EQUIPMENT - Steady rest - Collet chuck 173E (Ortlieb) - Parat base holder - 14 Parat tool holders (WD2/25) - Machine feet - Schunk Rota-G D200 key bar chuck - Live center - Machine documentation (operating manual / programming manual / Electrical circuit diagram / data backup on CD)

Condition: excellent (used), Year of construction: 2004, turning length / mm turning diameter over bed / mm turning diameter over slide / mm control / Universal lathe VDF Boehringer DUS 1000 ti OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Machine no. 2042.6616-05 Year of construction 2004 Turning length approx. 2200 mm Swing diameter over bed 1,000 mm Swing diameter over bed 1,000 mm Centre height over flat track 500 mm Bed width 560 mm Bed slide guide length 800 mm Spindle diameter front bearing 170 mm Spindle bore 128 mm Infinitely variable three-phase motor (AC motor) Lolhceud In Hocqpshg Drive power 37 kW Torque max. 4,069 Nm Total speed range 6.4 - 1,600 Gear stages 2 Heidenhain control Manualplus 4110, completely renewed approx. 1 to 2 years ago renewed 2 lynchets Equipped with roto power chuck, diameter approx. 500 mm. Including many accessories of clamping jaws, estimated 15 sets, as well as approx. 15 sets of Multifix basic holders, size D. Machine was equipped with a separate milling device, with its own control, value approx. 20.000,00 €. OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Only operated by the owner, very good condition!

Condition: used, Year of construction: 1997, turning length: 1,000 mm, turning diameter: 570 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, total height: 1,800 mm, overall weight: 4,000 kg, controller manufacturer: NUM, controller model: 1062, machining diameter: 570 mm, space requirement length: 3,400 mm, space requirement width: 1,900 mm, CONTROLS .. CNC Teach In Controls NUM 1062 BASIC FUNCTIONS .. number of x/z slides: 1 .. live positions: no WORKING RANGE TURNING .. swing diameter (max): 570 mm .. turning diameter (max): 365 mm .. worpiece length max.: 1000 mm MAIN SPINDLE .. spindle revolutions (min): 3 /min .. spindle revolutions (max): 2500 /min .. number of gears: 2 .. spindle diameter: 62 mm X/Z SLIDE .. traverse velocity Z (min): 0 mm/min .. traverse velocity Z (max): 10000 mm/min .. traverse velocity X (min): 0 mm/min .. traverse velocity X (max): 5000 mm/min .. tool fixture: Steel Holder TAILSTOCK .. taper: MK 5 ELECTRICAL SPECIFICATIONS .. mains power supply: 35 kVA .. mains voltage: 400 V Lelhcjurca Uocqpshg .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3400 mm .. space requirements -front/back-: 1900 mm .. total height: 1800 mm .. total weight approx.: 4000 kg ATTACHMENTS (TURNING) .. tailstock: yes Equipment: - 3 jaw chuck - div. soft jaws Machine is mechanically top but has a control defect (old tube screen, defective)

Condition: used, _____ Description: Year of manuf. : 2008 Control : Siemens 840 D Spindle bores : 45 mm Turning diam. : 420 mm Turning length : 1000 mm In General: Year of construction:2008 Control:Siemens 840 D Spindle speed:3,000 rpm Turning diameter:420 mm Center distance:1,200 mm Tool turret:8 stations Lelhsvr Ayxoccqpjhg Tool holder:VDI X-axis:420 mm Z-axis:1,000 mm Equipment: Chip disposal:Chip conveyor Coolant supply:Coolant pump Tailstock:With quill MK 4 Tool holder:Sauter tool turret Chuck:3-jaw chuck

Condition: good (used), Year of construction: 1977, Functionality: unexamined, machine/vehicle number: 218758, spindle bore: 53 mm, turning diameter: 520 mm, turning diameter over bed slide: 320 mm, turning length: 1,500 mm, total length: 4,000 mm, total width: 1,500 mm, total height: 1,800 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 31 rpm, overall weight: 1,500 kg, EQUIPMENT: - Tailstock - Multifix turning tool holder Lelswdn Nnshccqpjhg

Condition: good (used), Year of construction: 1974, machine/vehicle number: 1047.2416-07, VDF Lathe Boehringer M670 | Built in 1974 Well-maintained and robust VDF Lathe Boehringer M670 from 1974. Ideal for metalworking applications. The machine is ready for use and can be inspected by appointment. Technical Specifications: Manufacturer: Boehringer Type: M670 Year of Manufacture: 1974 Center height over flat track: 335 mm Center distance: 2000 mm Spindle head: DIN 5502 Gr. 8 Spindle diameter front bearing: 130 mm Spindle bore: 82 mm Speed range: 71–1400 rpm Lead screw pitch: 12 mm Max. swing over bed: 690 mm Lolhccqsv Tnc Uspohg Max. turning length: 2000 mm

Condition: good (used), Functionality: fully functional, Böhringer hydrostatic transmission: Ljlhccevwb Avjqpohg Type 3 C 89 ZF. Drive speed 1,500 rpm Output speed 0 - 950 rpm. Nm 750. Böhringer hydrostatic transmission: Type D 68. Drive speed 1,500 rpm Output speed 0 - 1,180 rpm.

Condition: used, Year of construction: 1975, turning length 1500 mm turning diameter over bed 610 mm turning diameter over slide rest 375 mm number of spindle speeds 9.0 - 1800 U/min. spindle bore 82.0 mm tailstock quill taper MT MK 6 spindle taper DIN 55022 bed width 500 mm Cross slide displacement 455 mm Upper support displacement path 200 mm voltage 380 V total power requirement 25.0 kW weight of the machine ca. 4250 kg range L-W-H 4250 x 1400 x 1600 mm Machine from a maintenance workshop New price in 1975 approx. 40.000 Euro Lathe with precision-ground and induction-hardened bed. Ideal for use in workshops/industrial plants, for example. Features: - Robust, conventional Lathe with drawbar - 1x three-jaw chuck with spare jaws - HEIDENHAIN digital readout - Special control panel * on swivel arm on the lock case - MULTIFIX tool holder with numerous inserts - Machine bed without offset - Hardened and ground guideways - Hardened and ground gears in the headstock - Electromagnetic main spindle brake - 1x robust, adjustable tailstock * including live center - Chip guard on the rear panel - 1x separate motor cooler - 1x separate control cabinet - Coolant system - Original machine documentation Lelhjwlvhzeccqpohg

Condition: used, Year of construction: 1987, Lead and draw spindle lathe Make: Boehringer Model: DUE 560 Year of manufacture: 1987 used Technical data: turning diameter 250 mm turning length approx. 1200 mm Rotation Ø over bed 560 mm Rotation Ø over facing slide 365 mm Max. workpiece between the centers 500-800 kg Spindle diameter in front bearing 100 mm Spindle bore 62 mm Spindle head DIN 55022 No. 8 Travel Face slide travel 345 mm Lhelhcstud S Ujcqpeg Top slide travel 125 mm Tailstock/pinsØ 80 mm Tailstock holder MK 5 Quill stroke 190 mm Longitudinal feed 60 x 0.0315-28 mm/1 Face feeds 60 x 0.016-14 mm/1 Tapping capacity 0.125-112 mm Total power requirement 20 kW Space requirement approx. 3.5x2.0x2.2 m Weight: approx. 2.5 tons

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 tailstock taper MT 5 quill stroke 190 mm Lslsu Sbkgshccqpshg pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, •Turret overhaul in 2021 •Cooling lubricant pump with higher pressure/output in 2021 •Draw tube renewed and headstock re-bearing and ground in 2022 •Prepared for automatic insertion of parts using a robot cell Control: CNC control including color screen Siemens 840 D TECHNICAL DATA Swing diameter max. 550 mm Turning diameter max. 480 mm Turning length 1000 mm Spindle bore 78 mm Drive power (50%) 53 kW Speed range (1-stage) 30 – 4000 1/min Drum turret Number of holders 12, of which 6 are driven Cylindrical shaft holder 40 mm Speed range (2-stage) 20 – 2500 1/min Tailstock (hydraulic quill adjustment) EQUIPMENT/ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C. axis  Tailstock dragged via program including various centering points Lolsvr Tkzshccqpjhg  12-way drum turret  Turret drive device  Chip conveyor  Coolant device with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 Heimbuch Spanntop SK 80, without collets  1 Schunk Rota NCF 315 three-jaw chuck  1 Schunk Rota NCF 250 three-jaw chuck  1 Schunk Rota NCF 250 two-jaw chuck  1 WTO impact head  2 driven tools CAPTO-Axial tool  2 driven tools CAPTO-Axial Radial tool  3 driven tools CAPTO-Radial tool  7 fixed tool holders  Installation elements  Documentation

Condition: good (used), Böhringer Jaw Crusher. The ad is being edited, more detailed specifications & Plant description will follow. Transport can be organized if required. Welcome to Oussman-Machinery Lelhst Nd Smeccqpshg Bskciu2Fia Please feel free to contact us for any further information. We speak: english, german, arabic & french.

Condition: used, Screening area: 1,300 x 4,000 mm Lelhetpa Rrsccqpjhg including screen panels (OD: 60 x 60 mm, UD: 15 x 15 mm) on a single-axle trailer with discharge conveyor

Condition: good (used), Böhringer Jaw Crusher. Lhelhccet Hgkaeqpog The ad is being edited, more detailed specifications & Plant description will follow. Transport can be organized if required. Welcome to Oussman-Machinery Please feel free to contact us for any further information. We speak: english, german, arabic & french.

Condition: reconditioned (used), Opening: 1.080 x 1.000 mm Rotor-diameter x –width: 1.000 x 1.060 mm blow bars and inside linings as new Lhslholhrlwoccqpog incl. steel construction and discharge conveyor

Condition: good (used), Jaw crusher Böhringer 1000/800 mm Manufacturer: Böhringer Model: 1.000/800 mm + driveunit - E-Motor - Transport can be organized, if required, at an additional cost. Welcome to Oussman-Machinery Please feel free to contact us for any further information. We speak: english, german, arabic & french. Lhsloq I Nlkohccqpeg

Condition: good (used), Functionality: fully functional, Double-deck screening plant Lhelhcstpgv Iscqpsg Screening surface: 5,000 x 1,800 mm with tapping device for fine screening mounted on base frame