Used Bof for sale (107)

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. Hfodpfx Agehg Rcxe Non The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: new, functionality: fully functional, power: 5 kW (6.80 HP), fuel type: electric, empty load weight: 4,200 kg, Year of construction: 2024, filling bunker with bunker gutter bunker capacity 10.5m³ S355 / St52-3 vibratory feeder with 10mm Hardox 450 wear plate gutter fully stress relieved annealed 2 x imbalance motors 2,5kW NEW Hfsdpfeuqynmex Ag Nen

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Hsdpfehgg Rrjx Ag Nofn Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2000, table length 350 mm Hfodpsxmk Hlsfx Ag Nen table width 220 mm ampere 18 A Control FANUC 18i

Year of construction: 2007, operating hours: 37,000 h, condition: ready for operation (used), General Data Measurements width 2810 mm Measurements depth 2600 mm Measurements height 2080 mm Machine weight 4450 kg Main Drive Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Workpiece Hfodpoxmbvqofx Ag Non Workpiece X 1200 mm Workpiece Y 400 mm Workpiece Z 700 mm Workpiece weight 1500 kg Injection Unit Injection pressure 2/4/8/13 bar This 3-axis CHARMILLES Robofil 440 CC was manufactured in 2007 and features a robust design with a total system weight of 4450 kg when filled with dielectric. It can handle workpieces up to 1500 kg, with maximum dimensions of 1200 x 700 x 400 mm. Ideal for precision wire EDM processes, this machine offers a comprehensive control system with a TFT 12" screen. If you are looking to get high-quality EDM capabilities consider the CHARMILLES Robofil 440 CC machine we have for sale. Contact us for more information. Application Types EDM

Condition: good (used), Year of construction: 2000, State: Machine still in production. Chuck type: Hfjdpfx Aowzimvog Njn Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight (kg): Max. machining current (A): Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,240 mm, total length: 2,600 mm, total width: 2,810 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, empty load weight: 3,300 kg, warranty duration: 6 months, Charmilles Robofil 440 CCS Year of manufacture: 2010 Charmilles Millennium CNC control Hedpfxoxlcqgo Ag Nofn Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Maximum taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Complete system dimensions: 2,600 x 2,810 x 2,240 mm Total system weight: 3,300 kg Upon order, the machine will be cleaned and completely overhauled by us, and all functions will be tested. Upon request, we offer the following services: - Commissioning of the machine at your site - 6-month warranty - Control system training - Accessories such as chiller and clamping devices

Condition: used, Year of construction: 2004, Wire erosion / EDM Travel distance X: 350 mm Hjdpfx Asvyzgaeg Njfn Travel distance Y :220 mm Travel distance Z: 220 mm max. workpiece size X: 1000 mm max. workpiece size Y: 550 mm max. workpiece size Z: 220 mm max. workpiece weight: 750 kg table size X: 680 mm table size Y: 450 mm with AWF ( Automatic Wire Feeding ) U / V axis: 350mm / 220mm submerged

Condition: used, Year of construction: 1999, functionality: fully functional, Fully functional machine. Viewable at our Semsales premises from mid-June. Hjdpfx Agjwmw I Sj Nsfn

Condition: reconditioned (used), Year of construction: 1999, operating hours: 25,984 h, machine/vehicle number: 125128, In very good condition: Refurbished Charmilles Roboform 2000+ completely refurbished with 16-fold RTC changer. Extensive maintenance performed: all air-valves and tubing replaced, filters replaced, motors refurbished with new bearings and cleaned up, fans replaced, screen replaced. Optionally floppy drives can be exchanged for USB drives. C-axis seals have been replaced and is accurately aligned again. This is a 64A machine. Software and documentation is provided, onsite installation including warranty can be discussed! Tested and fully functional. Can be viewed and tested in working order. Hsdpfew Ad Idex Ag Nofn

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 2350 mm Hfodpjxcztnsfx Ag Nen Measurements height 1680 mm Machine weight 2500 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 300 mm Workpiece Workpiece weight 500 kg Table Number of tslots 3 This 3-axis CHARMILLES Roboform 35 die-sinking EDM machine was manufactured in 2000. It features a stabilized cast iron machine bed, a C-axis with 360° rotation, and a maximum electrode weight of 50 kg. The machine offers X, Y, Z travel paths of 350 mm, 250 mm, and 300 mm respectively. Ideal for precision mold making with its robust construction and reliable performance. Contact us for more information about this machine. Application Types EDM

Condition: good (used), workpiece weight (max.): 800 kg, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 160 mm, ★ EXCEPTIONALLY well-maintained machine from the liquidation of a renowned toolmaker – please also see our other listings ★ ❗Wire EDM Machine GF AGIE CHARMILLES ROBOFIL FI 6050 TW❗ Year of manufacture: 2005 / 2008 Machine number: 136005 Condition: Used, untested Delivery terms: Free loaded on truck (FCA) – unpacked Location: 73347 Mühlhausen Availability: Early December 2025 – The machines must be collected by the buyer in week 49 / 2025 as scheduled. The exact date will be specified by us. Earlier availability may be possible by arrangement. Payment terms: Advance payment by bank transfer Internal ref.: JO3 Available for inspection under power: YES – by appointment Technical data: Max. workpiece dimensions: 1260 x 690 x 360 mm Max. table load: 800 kg Travel (X / Y / Z): 630 / 400 / 160 mm Travel (U / V): +48 mm Measuring resolution: 0.5 μm Manual rapid traverse: 15 mm/s Wire feed speed: Adjustable from 2 – 15 m/min Taper angle adjustable from 0° to 30° Work tank dimensions: 1420 x 770 x 420 mm Max. discharge current: 45 A Operating hours approx.: 33,568 !!! Cutting hours approx.: 3,660 !!! Since the machine is currently connected to a central cooling system, the buyer may need to provide a separate chiller. Further technical details are available upon request. Scope of delivery: Manuals Accessories & spare parts as shown in the pictures Dimensions & weights: Hjdexg Rf Ujpfx Ag Njfn Installation dimensions L x W x H approx.: 3000 x 2700 x 2500 mm Weight approx.: 4,000 kg If you have any questions or wish to arrange a viewing, please feel free to contact us: ⚠️Also see our other listings⚠️ Additional information: We strongly recommend collection via direct transport (freight carrier) The goods are sold under exclusion of any warranty Technical data subject to change Sale subject to prior sale ❗Sale to business customers only❗

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Charmilles ROBOFORM 550 Year of construction 2006 Construction: - short C-frame with fixed table - Automatically lowerable container Travel: X = 600 mm, Y = 400 mm, Z = 450 mm; Max. Workpiece dimensions (L x W x H): 1200 x 850 x 400 mm Max. Workpiece weight: 1600 kg Max. Electrode weight: 100 kg Hjdpfeurk Dbsx Ag Njfn Min. /max. distance between table and quill: 150-600 mm Quill with automatic chuck of your choice (Erowa / 3R Systems); Incl. 16x electrode changer Incl. C-axis for rotation, indexing and erosion Max. Electrode weight: 100 kg ISOPULSE generator with 64 amps 12" touchscreen with keyboard and handbox Integrated connections: Ethernet RJ45, floppy disk drive, CD-Rom drive Machine weight (net): 4400 kg Machine dimensions (L x W x H): 2750 x 3150 x 3000 mm The machine is currently still being used by our customer and will be dismantled by our specialist staff. After ordering, the Roboform will be cleaned, serviced and tested by us. Optional: - Transportation - Cooler - Dielectric - Commissioning

Condition: used, Year of construction: 2003, Diesinking / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 300 mm table size X: 500 mm table size Y: 400 mm max. workpiece size X: 780 mm max. workpiece size Y: 530 mm max. workpiece size Z: 300 mm max. electrode weight: 50 kg max. workpiece weight: 500 kg electrode changer: 4 - time generator: 64 Ampere drop tank Hfodpfx Asvyzf Neg Nen control Charmilles

Condition: reconditioned (used), Year of construction: 2007, operating hours: 16,730 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 275 mm, total width: 300 mm, total length: 300 mm, table width: 750 mm, Charmilles FO550S. 16-position rotary tool changer. Erowa ITS50 chuck. Machine currently being serviced at our premises in Semsales, Switzerland. Inspection possible upon request. Further information available on request. Hfodpfx Ajxmidpog Nen

Condition: used, Year of construction: 1993, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 116 mm, workpiece height (max.): 150 mm, workpiece width (max.): 990 mm, workpiece length (max.): 505 mm, table width: 420 mm, table load: 500 kg, Equipment: cooling unit, documentation/manual, Taken out of production in working condition, removed due to the purchase of a new machine. The machine is currently disconnected and dismantled in our warehouse. All cables are numbered and photographed; these can be shared after payment for the machine to ensure correct installation at the new location. Hodpfx Agowu Shpe Nsfn

Condition: like new (used), Year of construction: 2003, operating hours: 800 h, functionality: fully functional, Rösler vibratory finishing system consisting of a centrifuge type Z800 HA Turbo Floc, vibratory trough type R220 EC, and dryer type RT150 Euro. All machines are from 2003 and have been used only very rarely, therefore they are in almost new condition both in their lining and paintwork! All operating manuals for each machine are included! Hfodpfow Idgcex Ag Njn

Condition: used, Year of construction: 2002, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, ★ TOP well-maintained machine from the liquidation of a renowned toolmaker - please also see our other listings ★ ❗ Wire EDM Machine CHARMILLES ROBOFIL 240 ❗ - Year of manufacture: 2002 - Machine number: 920530 - Condition: Used, unchecked - Delivery terms: Free loaded on truck – unpacked - Location: 73347 Mühlhausen - Availability: Beginning of December 2025 – The items must be collected by the buyer in calendar week 49 of 2025. The exact date will be specified by us. Earlier availability may be possible by arrangement. - Payment terms: Advance payment by bank transfer - Internal reference no.: JO2 - Can be inspected under power: YES – by arrangement Technical data: - Maximum workpiece dimensions: 1000 x 550 x 220 mm - Maximum workpiece weight: 750 kg - Table dimensions: 680 x 450 mm - Total dielectric volume: 760 L - Travel X / Y / Z: 350 / 220 / 220 mm - Travel U / V: 350 / 220 mm - Maximum taper angle: ± 30° / 220 mm - Total generator hours approx.: 16,675 - Since the machine is currently connected to a central cooling system, the buyer will need a separate chiller. - Further technical details available on request Scope of delivery: - Manuals - Various accessories and spare parts as per images Dimensions & weights: - Installation dimensions L x W x H approx.: 2000 x 2000 x 2100 mm - Weight approx.: 2,500 kg ⚠️ Please also see our additional listings ⚠️ Additional notes: Hfodpjxg N Axofx Ag Non ► Direct pick-up (by forwarding agent) is expressly recommended ► The goods are sold excluding any warranty ► Technical data provided without obligation ► Subject to prior sale ❗ Sale only to entrepreneurs ❗

Condition: ready for operation (used), Struers LaboPol-5 Laboforce-3 Grinding and Polishing Machine Laboforce-3: Rotational speed: 250 RPM Applied force range: min. approx. 5 N - max. approx. 40 N LaboPol-5: Disc diameter: 200-230 mm Speed range: 50-500 RPM Hjdpfx Ajxfuhkeg Nefn You are welcome to arrange an inspection appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Interim sale reserved. Visit our shop to view this and our other offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Hfsdpfx Agow Ucyue Nsn Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: refurbished (used), Year of construction: 2007, operating hours: 15,125 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 200 mm, total length: 260 mm, total width: 280 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, type of input current: three-phase, overall weight: 3,300 kg, Charmilles Robofil 440SLP, 2007. Only 15,100 hours of work. Hfjdpfxjv Rbxws Ag Non Machine fully serviced and working. Viewable at our Semsales premises in Switzerland.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 41357/07, For sale: automatic centrifuge Rösler Z 800 HA-Turbo-Floc, designed for cleaning and recycling process fluids (water, emulsions, baths). The machine efficiently separates solid particles and sludge from liquids, thus extending the service life of process media and reducing operating costs. ✅ Capacity up to 800 l/h Hfedoxl Hpmjpfx Ag Nen ✅ Automatic operation ✅ Ideal for electroplating plants, paint shops, and machining operations ✅ Reliable German manufacturer In very good condition.

Year of construction: 1990, condition: ready for operation (used), With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible. Hfjdpfjw S Tygox Ag Non

Condition: refurbished (used), Year of construction: 1998, operating hours: 20,800 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, Machine currently undergoing revision at our facility in Semsales, Switzerland. Erowa ITS50 chuck. 16-position rotary tool changer, double gripper. Flat LCD screen. Retractable work tray. Inspection possible upon request. More details available on request. Hfedpfx Agoxlhude Non

Condition: excellent (used), Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, empty load weight: 2,500 kg, Equipment: documentation/manual, Machine in excellent condition. Machine already cleaned. Sold as is or revised on request. Hjdpfx Ajv Im R Teg Nofn Machine visible in our premises in Semsales in Switzerland.