Used Brandt Edgebander for sale (100)

Condition: used, Year of construction: 2008, - with workpiece return - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Feed rate max: 20 m/min - with groove milling unit One: Edge banding machine with return Manufacturer: Brandt Type: KDF 991 Year of manufacture: 2008 Workpiece return Manufacturer: Ligmatech Type: ZHR 05 Boomerang Year of manufacture: 2007 Technical data - Right-hand machine - Machine length: 8,260 mm - Ligmatech ZHR 05 length: 10,460 mm - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Thickness of wound edge max: 3 mm - Workpiece width min: 60 mm - Feed rate max: 20 m/min - Stepless feed: material pressure zone adjustable via servomotor - Electromotive height adjustment - Infeed stop: adjustable via servomotor - Infeed stop for thin elements - Glue system for granules: glue pot above the feed chain - BRANDT glue system QUICKMELT QA 45 Laedpjzuyp Sefx Afwef - Suitable for PUR adhesives - Magazine for single strips - Spray device, front, cleaning at the rear - Pre-milling unit - Preheating zone - End trimmers: 2 motors, pneumatically adjustable - Flush trimming: top + bottom, manually adjustable - Fine milling trimming unit: 2 motors, adjustable via servomotor R2 - Edge rounding unit: 4 motors, manually adjustable - Groove milling unit: manually adjustable with tilting function - Radius trimming blades: R2, pneumatically adjustable / Second set for R1 included - Flat trimming unit - Glue joint trimming blade - Cleaning fluid spray at the rear - Buffing unit - Solid wood edge sanding unit - Conformity marking: Including complete documentation and CE

Condition: used, Year of construction: 2004, - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) Lodpfx Afjzux T Asweaf - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Edge banding machine Manufacturer: Brandt Type: KDF 560 Year of manufacture: 2004 Technical data - Voltage: 400 V / 50 Hz / 3 phases - Connected load: 13.2 kW - Fuse rating: 35 A Equipment - Automatic unit adjustment via the PC control system - Control: Brandt Power Control PC20+ - Suitable for thin and thick edges (ABS, PVC, veneer, and solid wood edges) - Edge thickness: approx. 0.4 to 8 mm - Workpiece height: approx. 8 to 50 mm - Feed speed: 14 m/min Installed units - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2014, Description: see machine photos. Lajdpfx Aey Tm Nfefwof

Condition: used, machine/vehicle number: 006723, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Ledpjq A I Aaofx Afwsaf Max feed speed: 11 m/min

Condition: used, machine/vehicle number: 006458, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Ljdpfx Asnzrt Aefwsaf Maximum panel thickness: 50 mm

Condition: used, Year of construction: 2010, Edge milling machine Manufacturer: Brandt Type: FTK 130 Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is provided for informational purposes only and is not binding. Laodpfx Aozuzlhjfwof

Condition: used, Year of construction: 2010, Edge banding machine Manufacturer: Brandt Type: Optimat KTD 720 Lasdpfx Afszuzlbjwof Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2005, total height: 2,300 mm, overall weight: 2,600 kg, product length (max.): 6,060 mm, This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. • Processing units / aggregates: • Pre-milling unit • Glue application unit • Edge feeding and cutting (roll/strip) • Pressure zone • End trimming unit • Top and bottom trimming unit (pre-milling + profiling) • Corner rounding unit • Scraper unit (profile scraper) • Glue joint scraper Lsdpfx Ajzug E Tofweaf • Cleaning (solvent or spray system) • Polishing unit • Working capacity: • Workpiece thickness: 8–60 mm • Edge band thickness (rolls): 0.4–3 mm • Edge band thickness (strips): up to 12–15 mm • Feed speed: 8–18 m/min (up to 20 m/min depending on configuration) • Minimum workpiece width: • 70 mm (workpiece thickness 8–22 mm) • 120 mm (workpiece thickness 23–40 mm) • 150 mm (workpiece thickness 41–60 mm) • Maximum edge roll diameter: 830 mm • Electrical & power: • Total installed power: approx. 21 kW • Voltage: 400 V, 3-phase, 50 Hz

Condition: excellent (used), Year of construction: 1999, Edge banding machine Manufacturer: Brandt Laodpozt I Iyofx Afwof Type: KD 69 Q Year of manufacture: 1999 Edge thickness: 0.4 - 3 mm Workpiece thickness: 10-50 mm Min. workpiece width: 70 mm Min. workpiece length: 170 mm Feed rate: 11 m/min Power: 6 kW Pressure beam adjustment: Electric Miter saw unit: Yes Radius flush trimming unit: Yes, two units Radius draw knife: Yes Rounding unit: Yes Dimensions: 4,400 x 1,260 x 1,990 mm Weight: approx. 1,160 kg

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Ljdpoy Ruzqsfx Afwoaf

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue applicators, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed speed: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x100 mm, 4x80 mm including the illustrated ductwork to 200 mm Easy-Touch control with color screen for easy machine operation 10 programs can be saved Units: Top pressure: manual adjustment with crank and SIKO counter Infeed guide: manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue applicators for quick color change from white to transparent Gluing section with automatic edge infeed for roll material up to 3 mm Pressure zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and rounding Corner rounding cutter R2 with 1 diamond cutter, motorized Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking Operating manual in folder form All indexable inserts of the milling units and trimming blades have been replaced or resharpened, saws sharpened, and diamond joining cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profile milling unit has not been replaced, but it is still sharp. Lasdpfx Afjzn Afpswof Original paint, with only a few spots touched up. Dust extraction hoses renewed. Approx. 1200 operating hours, which is only 1/2 hour per day. Machine dimensions: approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight: approx. 950 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier."

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Lsdpfxjvvkd Ts Afweaf

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Lsdpevvkfwsfx Afwjaf

Condition: used, Year of construction: 1996, Brandt edge banding machine in good, used condition. KTV51 - Year of manufacture 1996 The machine was purchased used and only used occasionally. The machine is being sold as part of the closure of our carpentry business. Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. Laodpfozpflnex Afwef An inspection of the machine is possible by arrangement. A fixed inspection date is scheduled for July 18 or August 1 from 10 a.m. to 2 p.m. at our premises in Stemwede.

Condition: excellent (used), BRANDT KDF 440, 1440 edger well-equipped, CNC-controlled units operated from the control panel Pre-milling cutters Plate heating Glue application with a roller Second tank included Pneumatic pre-trimming guillotine Pressure rollers Trimming balls for final cut Liquids Multi-milling unit (up/down) R1-R2 Corner rounding unit R1-R2 Multi-profile edging unit R1-R2 Straight edging unit Liquids Laedpfx Afezuztfowof Polishing unit Nesting package Max. element height 60 mm Max. veneer thickness in roll 3 mm Feed rate max. 14 m/min with corner rounding 11 m/min Very good condition for a used machine Original mileage 144,000 meters

Condition: good (used), Year of construction: 1991, Edge banding machine for shaped parts, edge bander, edge banding machine -Workpiece thickness: 10-85 mm -Heating fan: 6 kW, pre-coated edges Laodpfx Aob A Ninjfwjf -Cutting knife -Edge plate -Transport dimensions: 900/700/H1080 mm -Weight: 135 kg

Condition: good (used), Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine Lodpjgylq Ssfx Afwoaf -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available -Dimensions: 510/430/H570 mm -Weight: 62 kg

Condition: good (used), Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine Lsdpsgylrdefx Afwsaf -Manufacturer: Brandt, components from the BRANDT KM 36 edgebanding machine -Individual components: see photos -Price/Sale: complete -Overall dimensions: 1200/800/H530 mm -Total weight: 122 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 2 milling units and 2 buffing units from BRANDT KS 25 edgebanding machine -buffing units: motor KMER 0.18 kW 1360 rpm -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling -Milling units: Motor Perske / Homag, see photos of nameplates -Voltage: 220 V / 200 Hz Ledpfxjx Hyzhj Afwjaf -Price/Fee: complete -Overall dimensions: 1200/800/H590 mm Total weight: 175 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch Lodpegy Da Sofx Afweaf -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -Finish unit: from BRANDT KM 35 edgebanding machine -Motor: ATB 0.25 kW -Speed: 2820 rpm - laterally adjustable -Height: adjustable -Dimensions: 480/250/H490 mm -Weight: 29 kg Lsdpfxegy T I Ej Afwsaf

Condition: good (used), Year of construction: 1981, Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine Lasdpjb A Hfqjfx Afwsf For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Condition: used, Edge banding machine, edge banding machine, edge banding machine, finishing unit, buffing unit, modular assembly kit, format processing unit, double-end profiler, edge processing machine, sanding unit, edge banding unit -Unit: from edge banding machine BRANDT KM 35 -Motor: Groschopp type PM1 72-35 - Mot 180 V / 54 W. Lasdpfx Asgy T Nxsfwjf -Individual components: see photos -Dimensions: 425/270 / H260 mm -Weight: 24 kg

Condition: good (used), Gear, angular gear, Stinrad gear, transmission gear, worm gear, angular gear for edge banding -Manufacturer: ZAE, angular gear with cardan joint from the BRANDT KS 25 edge banding machine -Type: W 88 -Translation: i = 2: 1 Ljdpfx Afjgylraswjaf -Dimensions: 260/100 / H210 mm -Weight: 7.2 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz Lajdpfsgy Dbhex Afwof -Number: 2x milling unit available -Price per piece -Dimensions: 500/350 / H570 mm -Weight: 55 kg