Used Boston Wire Stitcher for sale (3,106)

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Klsdpfex N I N Sjx Addjl Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: good (used), Introma ZD-2 SR Wire Stitcher The machine is in very good condition and ready to use. This is the current production model. Technical specifications: Capacity: 180/min Sewing thickness: max. 25mm Wire diameter: max. 1mm Power supply: 230V Weight: 230kg The machine has an adjustable table for block and booklet stitching. Side and front margins. Kledpfxox N I N Eo Addel Instructions included.

Condition: good (used), Hohner Favorit wire stitcher Very good condition, ready to work. A reliable machine, with legendary durability. Klsdpfewungbsx Addol Technical data: performance: 160-225 cycles / min sewing thickness: 25mm (piercing up to 40mm without closing the clamp from the bottom) wire diameter: max. 1mm Power supply: 380V Weight: 280kg The machine has an adjustable table for block and booklet sewing.

Condition: good (used), Module converter, electronic module Kedpfx Aofcl H Ijddoll -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 Kedofcl H Uspfx Addell -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor Kljdpfjq Rxz Tex Addsl -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Ksdpfx Asxtwddsddoll

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. Kljdpfjf Nku Rox Addsl On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. Kjdpfxjmk S Slj Addell We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: ready for operation (used), 1 x Stitching unit 380 with Amrys 2 x Stitching headsd HK75 1 x Caliper control with reject 1 x Obluque sheet saddle monitor 1 x Remote control jogger inch 5 x Section feeders 370 with Amrys Kjdpfoxya Eqex Addjll 1 x Cover folder feeder 554 with Amrys 1 x Three knife trimmer 449 with Amrys 1 x Muller Martini Perfetto stacker delivery 450

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys 2 x stitching heads HK75 Kedevpaubepfx Addoll 6 x section feeders 370 with Amrys ASIR3 1 x cover folder feeder 1554 with Amrys 1 x three knife trimmer 449 with Amrys 1 x OMG stacker delivery

Condition: excellent (used), Year of construction: 2008, Ref: 11054 . 2008 Horizon Stitchliner 5500 Fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: • 10.4” icon-based 200 job memory colour touchscreen • Simple, fast set-ups by non-specialist finishing operators • Advanced all-system automation • Make-ready in seconds, next-to-no-waste, on-demand working • Works from flat-sheet 4-page sections Ksdpfxex Sq S Ie Addell • No need to pre-fold • Integrated automatic set-up 3-knife trimmer • No need to pre-trim • Score, plough fold, registration and genuine saddlestitch • High quality books with sharp spine definition • High efficiency from runs-of-one Comprising: 30 station - 5 x VAC60 (a+m+c) 6 station tower suction collators with touch-screen control, double- and miss-sheet control Separate collating from 'C' tower ST-40 Stacker /bypass to; ACF-40 Accumulator/Folder with double gate-fold to; SPF-30 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-30 Three knife trimmer unit with hand-feed station LC-20 Long belt delivery Specification: Max sheet size: 350W x 500L mm Min sheet size: 148 x 210 mm Max stitch thickness: 6 mm. Production speed up to 6,000 booklets per hour, dependent on stock.

Condition: ready for operation (used), 1 x stitching unit - 380 2 x stitching heads HK75Q 1 x remote control jogger inch Klsdpfxsxxnlpe Addjl 1 x oblique sheet saddle monitor 6 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stacker delivery - Perfetto 450   Optional if needed; Centre cut for double production small size attachment for feeders additional stitching heads 

Condition: used, Year of construction: 1998, Sodick AM 35 CNC EDM Machine Model: AM 35 Year: 1998 Control: Neuro Fuzzy II 40: ‘X’ axis Travel: 350mm ‘Y’ axis Travel: 250mm ‘Z’ axis Travel: 250mm Kljdpfxswqgh As Addsl Tank Dimensions: W 790 x D 590 x H 320mm Max. electrode weight: 50 kg Max. Table Load: 550 kg With: Magnetic chuck 350 x 250mm

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys 2 x stitching heads HK75 1 x Touch screen Navigation control with auto make ready 5 x section feeders 370 with Amrys 1 x cover folder feeder 1554 with Amrys              only 10,000 hours Kodpfsvvpagsx Addoll 1 x three knife trimmer 449 with Amrys 1 x Muller Martini Practico stacker

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Kodpfx Aex R Uzdsddjll Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. On site viewing and inspection recommended

Condition: ready for operation (used), Hole Punch Centre cut Kedpfx Adoir A Hasdoll Slim line stitching heads

Condition: used, Year of construction: 1979, weight 200 kg 931855500 Kjdpfx Adsx U A Sredell

Condition: used, Year of construction: 1974, wire dia. 5 - 17 mm wire length max. 5.000 mm straightening feed stufenlos bis ca. 60 m/min 11 kW, 380 V, 50 Hz 45 kW, 1480 U/min; 380 V, 50 Hz Klodpex U A I Hsfx Addjl total wight ca. 15 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, für Draht Ksdpfx Aoh Tafxjddell hydraulically tiltable ja 2 t Year unbekannt Hydraulik +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 10024150, Sewing machine Muller Martini Ventura MC-200, Machine speed* Mechanical of 18 to 200 cycles/min, max. 12 000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, Lap opening min. 8 mm, low or high folio lap, Stitches Number of stitches standard 13, staggered 14, Stitch length 16.5 mm with/without blind stitch possible for all stitch types Sewing machine Muller Martini MC 200 Ksdpfsx Rywkox Addoll

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75            ONLY 3,800 hours 1 x SEMKO side caliper with reject 6 x section feeders 1551 1 x cover folder feeder 1528 Kljdpfsv Ap Iwsx Addjl 1 x three knife trimmer 1565 1 x stream delivery 1564

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Klsdpexpxhvjfx Addel Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation, see the function video for more information. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 1998, condition: like new (used), machine/vehicle number: 91.06243, 4 compact-double-feeder, type MM 1551, 1 cover-feeder, type MM 1528, With creasing-system, Stitching-station, type MM 1550, 2 standard-stitching-heads and also with loop, Trimmer type MM 1522, Extra belt-delivery Model 1511, 2 compressors, Extra knife set. Kljdpfxsgt E I Es Addsl Machine nr: 91.06243

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device Klsdovw Radopfx Addol -Manufacturer: Oerlikon wire feeder, gas-cooled -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm -Total weight: 19.6 kg