Used Saddle for sale (657)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,812 h, functionality: fully functional, product width (max.): 480 mm, product height (max.): 12 mm, product length (max.): 320 mm, TECHNICAL DETAILS Performance (cycles/hour) Speed: max. 14,000/h Wrapping speed: max. 14,000/h Pre-folding: max. 12,000/h Piston opening: max. 12,000/h Rcjdpfozw Ak Rjx Ahaof Offset stitching: max. 12,000/h Dimensions – Width × Spine Length Uncut: max. 320 × 480 mm Uncut: min. 85 × 128 mm Single-up Cut: max. 315 × 475 mm Minimum cut size: 80 × 120 mm Double-up Uncut: min. 85 × 210 mm Trim mark Cut: min. 2 × 64 × 100 mm Product height (compressed) 3-knife cut: max. 12 mm Middle cut as trimming cut: 10 mm Middle cut as punching cut (half punching width): max. 6 mm Triple cut as trimming cut: 5 mm MACHINE DETAILS Operating hours (according to counter): 14,812 h EQUIPMENT 1 CHU feeder 2 DVU vertical feeders 2 DHU horizontal feeders 1 Stitchmaster three-knife cutting machine with middle cut 2 knife sets 4 stitching heads CHA forklift Note: Further technical details can be found in the attached document.

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75Q 4 x section feeders 1551 1 x cover folder feeder 1528 Rsdpfx Ahozmzp Djaocf 1 x three knife trimmer 1565 1 x stream delivery 1564

Condition: ready for operation (used), 1 x stitching unit 1550 Rjdpfx Ahozlu Sijascf 1 x Touch Screen Navigation control 1 x SEMKO side caliper  2 x stitching heads HK75Q 6 x section feeder 1551   fitted with ASIR camera recognition              ONLY 2,600 hours from NEW 1 x cover folder feeder 1528 fitted with ASIR camera recognistion  1 x three knife trimmer 1565 1 x stream delivery 1564 Optional if needed; Waste extraction system Loop stitching heads Standards stitchinbg heads Slim line stitching heads

Condition: ready for operation (used), 1 x stitching unit - 380 2 x stitching heads HK75Q 1 x remote control jogger inch 1 x oblique sheet saddle monitor 6 x section feeders 370 Rcedjxxnlpjpfx Ahaef 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stacker delivery - Perfetto 450   Optional if needed; Centre cut for double production small size attachment for feeders additional stitching heads 

Condition: ready for operation (used), 1 x Stitching unit 380 with Amrys 2 x Stitching headsd HK75 1 x Caliper control with reject Redpfjxya Eqox Ahascf 1 x Obluque sheet saddle monitor 1 x Remote control jogger inch 5 x Section feeders 370 with Amrys 1 x Cover folder feeder 554 with Amrys 1 x Three knife trimmer 449 with Amrys 1 x Muller Martini Perfetto stacker delivery 450

Condition: excellent (used), Year of construction: 2014, Ref:11114. 2014 Muller Martini Primera E140. Latest specification, top of the range, M.M. saddle stitcher with short change over times and wide size range. The 'E' model has full ‘AMRYS’ (Automatic Make ReadY System) set-up. Feeders, stitcher, trimmer & stacker are quickly and automatically set to the desired book format. Comprising: 7 station track & chain on universal bases 6 x 3738 stream feeders 6 x 0379 top-loading feeders with ASIR III cameras 0507 Cover feeder with motion / copy control Semko & Ellex control Primera E140 stitching unit 2 standard stitching heads HK75 2 ring-eyelet stitching heads HK75 0408 three knife trimmer with centre cut M.M. 'Robusto' 0451 compensating counter stacker Rcjdpfx Aozn Hqiohasf Including PIAB air venturi suction system. N.B. In-house compressed air supply required (not included). Specification: Product size (untrimmed), Max: 480 x 320 mm high folio lap (290 mm low folio lap) Max: 480 x 300 mm (without lap) Min: 90 x 80 mm (with & without lap) Signature size stitching, Max: 480 x 320 mm Min: 153 x 115 mm, 126 x 123 mm (CD size) Product sizes, trimmed, Max: 475 x 310 mm Min: 105 x 63 mm (148 x 105 mm with stacker) Head/foot trim, Max: 50 mm front trim, Max: 50 mm Product thickness, Max: 13 mm (standard) Mechanical speed, Max: 14,000 copies/hr.

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys 2 x stitching heads HK75 6 x section feeders 370 with Amrys ASIR3 1 x cover folder feeder 1554 with Amrys 1 x three knife trimmer 449 with Amrys 1 x OMG stacker delivery Rsdpjvpaubofx Ahajcf

Condition: ready for operation (used), 1 x stitching unit 380 2 x stitching heads HK75Q 1 x Touch screen Navigation control 1 x oblique sheet saddle monitor 1 x remote control inch 4 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 Rcodpfxjyuk S Se Ahajf 1 x stream delivery 1564 Optional; 2 x loop stitching heads 1 x Rima stacker

Condition: used, Niles Centre Lathe, Type DLZ800 LIV5000, Approx 5.2m Between Centres x 860mm Swing Over Bed, 250mm Swing Over Saddle, Fitted with 750mm 4 Jaw Chuck, 2 Fixed Steadies Steadies, Total Weight 7 Tons, Serial No Rcjdpfx Ahozvrrhsaef Specifications: Swing: 1,000 mm Centers: 8,000 mm

Condition: excellent (used), Year of construction: 2019, Ref:11075 . 2022 Horizon Stitchliner Mark III Only 8.35 million books made! Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: Rcodpsywlifjfx Ahaof Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 12 station (1 x VAC 600Ha + 1 x VAC 600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 4 x Hohner 43/6S stitching heads to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer PK-30 Kicker Shingle delivery belt

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75            ONLY 3,800 hours Rsdpfxev Ap Iwj Ahaecf 1 x SEMKO side caliper with reject 6 x section feeders 1551 1 x cover folder feeder 1528 1 x three knife trimmer 1565 1 x stream delivery 1564

Condition: used, Lang Centre Lathe, Approx 7.6m Between Centres x 800mm Swing Over Bed, 400mm Swing Over Saddle, Fitted with 4 Jaw Chuck (750mm Diameter) , 2 Fixed Steadies Rcodpfx Ahezvrn Neaef

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options. Rjdpfxozhnlzs Ahascf

Condition: excellent (used), Year of construction: 2016, Ref: 11137 . 2016 Horizon SPF-200L Latest model, high speed, fully automated booklet maker with A4 landscape format capability With additional trimmer for 3 sided cutting! Features: Advanced Automation – All necessary settings for a wide variety of booklet formats can be performed automatically. Even the fold roller gap adjustment is automated so very quick changeover with minimal test sheets. 10.4’’ large colour touchscreen with icon-based display for easy operation Cost Savings –works with pre-cut 4-page sheets instead of folded signatures to eliminate the folding process. Equipped with: 3 x Horizon VAC-600Ha+m+c towers (18 Bins) PJ-77R Jogger delivery for rear collation off C tower IFU-200 connecting unit SPF 200L Stitcher and folder 2 x 43/6-S Hohner Stitching heads FC 200L Foredge trimmer TBC-200L Top and bottom trimmer Waste paper removing conveyor PK-30 kicker LC-200 delivery Specification: Sheet Size: Max. 356 x 610 mm or 14.000” x 24.000” Rcjdpozuth Ijfx Ahaef Min. 120 x 180 mm or 4.725” x 7.090” Sheet Weight Range: Normal Paper: 64 to 157 gsm Art Coated Paper: 84.9 to 157 gsm Stitch Thickness: Top/Side Stitch, Corner Stitch and Fold Max. 4 mmor 0.155” (About 48 sheets of normal paper 64 gsm) Production Speed: Max. 4,000 booklets per hour (A4-Finish, Portrait) Max. 3,500 booklets per hour(A4-Finish, Landscape)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Redpfjzhn Rqsx Ahascf Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: excellent (used), Year of construction: 2018, Ref:11117 . 2018 Muller Martini HK75Q Stitching Heads (pair) HK75Q quick setting stitching heads in good working condition (without bottom clincher). Specification: Min. center distance: 75 mm Min. wire length: 24 mm, Max. wire length: 32 mm Rcjdpet Dpqqefx Ahajf Min. leg length: 6 mm, Max. leg length: 9 mm Max. stitching thickness: 5 mm Also available: Ref:11116 . 2018 Muller Martini HK75Q Stitching Head (single) Ref:10679 . 2005 MULLER MARTINI HK45 NARROW (pair) Ref:10678 . 2002 MULLER MARTINI 0249 LOOP (pair) Ref:10677 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10676 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10675 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10674 . 2010 MULLER MARTINI 0249 LOOP (single)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 35,000 l, usable tank capacity: 35,000 l, total length: 4,865 mm, inner diameter: 3,000 mm, outer diameter: 3,016 mm, overall weight: 4,670 kg, wall material: stainless steel, wall thickness: 8 mm, manhole location: top, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this large-capacity 316L stainless steel horizontal storage vessel is suitable for bulk hygienic chemical and process liquid storage. Designed for vacuum and low-pressure service. Constructed entirely in 316L stainless steel throughout with 8mm shell and 6mm dish walls, heavy duty stainless steel cradle supports, and ANSI/tri-clamp process connections throughout. Suitable for bulk hygienic storage, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 35,000 Litres. Shell ID: 3,000mm. Overall Length: 4,865mm. Shell Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 4,250–4,670kg depending on configuration. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Factory Tested: 2021. Three units currently available: two insulated and one non-insulated. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Rcedpfx Ahezht Rieajf Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 15,000 l, usable tank capacity: 15,000 l, total height: 3,875 mm, outer diameter: 1,750 mm, overall weight: 2,900 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 15,000 Litres. Shell ID: 2,930mm. Overall Height: 3,875mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 2,900kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19635-3. Factory Tested: September 2020. Rcjdpfx Aezhn Ngshasf Nozzles and fittings include 610mm hinged manway, CIP inlets with dip pipe and TOD clip-on spray fittings, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, flush polished level switch, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. . Please contact us for further information or to discuss delivery and installation options.

Condition: ready for operation (used), Hole Punch Centre cut Slim line stitching heads Rcedpfx Ajir A Hajhajf

Condition: ready for operation (used), 1 x stitching unit 1558 Rcjdpfx Aoir A D Rehaof 6 x section feeders 1559 1 x cover feeder 1528 1 x three knife trimmer 1522 1 x stream delivery 225

Condition: used, Hankook Protec 9NC/4000 4m Between Centres, fitted with 630mm Diameter 3 Jaw chuck with 250mm bore, also 800mm 4 jaw with 250mm bore , and 770mm rear mounted 4 jaw with 250mmm bore. 720mm Swing Over Saddle, 1000mm Swing Over Bed, Year 2008.3, Full length Swarf Conveyor, Fanuc 21i Control. Fitted with Duplomatic BSV-N250-8/25-220-380/60L. Available now under power at site to view, available now for supply. Specifications: Swing: 37.4" Rodpfx Ahsx I R Emeascf Machining Length: 157" Power: 26 kW Max RPM: 630 RPM

Condition: used, functionality: fully functional, turning diameter over cross slide: 660 mm, spindle bore: 105 mm, turning diameter: 910 mm, turning diameter over bed slide: 813 mm, turning diameter over top slide: 535 mm, turning length: 2,500 mm, spindle speed (max.): 643 rpm, spindle speed (min.): 16 rpm, Binns & Berry TB 909 Double Gap Bed Lathe Model: TB 808 Swing Over Bed: 808mm (32”) Swing Over Top Slide: 535mm (21.4”) Distance Between Centers: 2500mm (100”) Spindle Speeds: 16.6 – 643 RPM Spindle Bore: 105mm (4.2”) Machine With: 4 Jaw Chuck 3 Jaw Chuck Rcjdpezlhtajfx Ahaof Fixed Steady 2 Axis Digital Readout Rapid Traverse To Saddle

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75 4 x section feeders ( 2 twin) 1551 2 x hand feeding station Rcodpoir A D Hjfx Ahasf 1 x Three knife trimmer 1522 1 x delivery

Condition: like new (used), Year of construction: 2003, operating hours: 6,762 h, functionality: fully functional, type of input current: three-phase, Equipment: compressor, documentation/manual, MULLER MARTINI PRESTO SADDLE STITCHING 8 FEEDER + STACKER APOLLO 1540 used, as new conditions, age 2003-2005 composed by STITCHING UNIT 1550 NR. 4 DOUBLE KOMPACT FEEDER 1551 NR.1 COVER FEEDER 1528 NR.1 TRIMMER 1522 NR.1 STACKER APOLLO 1540 NR.3 COMPRESSOR RIETSCHLE KTA 80 OPTIONAL: lenght and stitching control Rodjyylnmepfx Ahascf small format within 98x60 mm on feeder small format within 98 mm on trimmer

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Duplo 600 Bookletmaker Stitch/Fold and Trim. Year 2019 1 Owner from new. In full working order with video on request. Any further info, inspection get in touch. Machine located in UK Paper type: Fine quality paper: 64 to 160gsm Art/Coated paper: 84.9 to 160gsm Cover sheet: 350 gsm Paper Size Rcodpfozmn Aqox Ahajf Saddle stitching/Length: 170 to 640 mm Width: 105 to 364 mm Side and corner stitching: B5LEF, A4SEF/LEF, B4SEF/LEF Maximum processing speed A3 finished to A4: 4,100sets/h A4 finished to A5: 4,600sets/h Minimum size: 5,200sets/h Stitching Capacity No. of stitches: 0 to 2 Stitch thickness within:2.5mm Folding Capacity Below 25 sheets (81.4 gsm) Key Applications • Letter landscape booklets • Small size booklets • Calendars • Corporate Reports • Catalogs • Brochures • Yearbooks • Magazines