Used Bow Press for sale (12,876)

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: D12L/8327, Offer Number: D12L/8327 Machinetype: wire nail press Make: WAFIOS Type: N51 Constr. year: 1988 diameter range: 2,2-4,2 mm Iijdpfezd U Nrex Ag Usc nail length: 13-105 mm output - pieces/min: 430 Location: In our warehouse

Condition: used, Year of construction: 2020, Note: - No workpieces (molds) included - (blue) - No forklift, etc., available on site. Iedpfx Aszfib Eog Ueic - Oils must be taken away.

Condition: good (used), Year of construction: 1990, Roll compactor, Bergmann – used: Price ex works: only €950 (net) Manufacturer: Bergmann Type: PS 8100E Isdpfx Aszbygreg Usic Year of manufacture: 1990 Serial number: 05 3658 2845/90 Pressing pressure: to Weight: 750 kg 400V, 5.5 kW Condition: good Available: from Q4/2026 Location: Hamburg Efficient waste compaction: A special steel drum enables effective collection, shredding and compaction of the waste, reducing its volume up to ninefold. Continuous filling: The machine allows for continuous filling by all users. The feed shaft can also remain open during the working process, which facilitates and accelerates waste compaction.

Condition: good (used), Year of construction: 1999, Baling presses, HSM, 30-ton pressing force – used: Ijdpfx Aezbygfsg Ueic Price ex works: only €2,950 (net) Manufacturer: HSM Type: 225.1 VL Year of manufacture: 1999 Machine number: 6124.834. N Serial number: 200014505 Pressing force: 30 tons 400V, 5.5kW Condition: good Available: from Q4/2026 Location: Hamburg

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Isdjzddrdspfx Ag Uoic

Condition: good (used), Year of construction: 1998, functionality: fully functional, Type BF17B3S, Taiwan, 3 dies, year of manufacture 1998 max. wire diameter 12 mm max. wire cross-section 115 mm Iodpfx Agezd Da He Uoic max. ejector stroke 90 mm max. ejector on the punch side 20 mm Motor approx. 15 kW Power max. 160 pieces/min, depending on the part to be manufactured 3rd station: optional deburring or forming Press Biauli BF17B, year 1998, 13 tons Oil pans 424 kg Conveyor belt 199 kg Control cabinet 205 kg Platform 186 kg Machine parts/accessories 565 kg We sell the above items with exclusion of liability for defects in materials and workmanship and without any warranty on functions or their dimensional accuracy. No major defects are known to us, and the machine has functioned perfectly up to the present.

Condition: ready for operation (used), Year of construction: 1992, Immediately available due to business closure: CNC press brake Lotze Model 327 x 1500 kN Year of manufacture: 1992 Cybelec DNC 70 control Press force: 150 t Working length: 3500 mm CNC-controlled backgauge Throat depth: 300 mm Stroke: 300 mm Drive: 15 kW Isdpfjzd Rayjx Ag Ueic Complete set of top and bottom tools (prisms) Weight: 12 t Price: EUR 6,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location. Iodpfx Agozd N R Do Ujic

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Isdozd N Rwepfx Ag Uoic Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Hydraulic double-column straightening press Dunkes Type HDSR 75 Year of manufacture: 1977 Pressing force: 165 t 3 cylinders, pressing force per cylinder: 75 / 65 / 25 t Iijdpfszd N Rqex Ag Usc Table: 1500 x 500 mm Stroke: 350 mm Drive power: 3 / 15 kW Weight: 6 t Price: EUR 2,750— plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1992, Available immediately from our location: Hydraulic single-column press, Edelhoff Type HEP 45 Year of manufacture 1992 Iiodszd N Rdjpfx Ag Uoc Machine complies with the latest UVV regulations Pressing force 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive power 7.5 kW Weight 6 tons 4 guide pins of the upper ram are broken. These need to be unscrewed and replaced. Apart from that, the machine is in perfect working order. Price: EUR 3,000.00 plus VAT, ex works.

Condition: good (used), Year of construction: 2021, machine/vehicle number: 73332117063, functionality: fully functional, pressing force: 175 t, stroke length: 265 mm, total length: 4,100 mm, total width: 1,800 mm, total height: 2,900 mm, overall weight: 12,000 kg, controller manufacturer: DURMAZLAR, controller model: DT-15, working length: 3,050 mm, DURMAZLAR AD-R 30175 CNC Press Brake - Weight of upper tools: 11 kg - Weight of lower tools: 16 kg Iiedpozdzmdefx Ag Uec - Includes tool cabinet from the manufacturer APFEL - Contents include various press brake tools such as punches, dies, and other bending tools - Also includes another workshop drawer cabinet from the manufacturer SSI SCHÄFER, also with contents suitable for the machine. Note: The item must be picked up between August 4th and August 13th, 2026, on a date to be confirmed. FCA D-79268 Bötzingen – loaded onto a truck.

Condition: used, The Squarefold technology transforms V-shaped, saddle-stitched and folded brochures into flat, square booklets with a highly appealing visual appearance. Iisdpfszdgbuex Ag Ujc

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 4025 mm Isdpfjzakf Njx Ag Usic -Width: 1990 mm -Piston diameter: Ø 63 mm -Stroke: 110 mm -Pressure force: 20 t -Overall dimensions: 1990/4025/H1920 mm -Weight: 5060 kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, type of input current: three-phase, table width: 805 mm, table length: 1,205 mm, oil tank capacity: 250 l, total length: 2,050 mm, total width: 1,410 mm, total height: 3,200 mm, overall weight: 8,000 kg, DGUV certified until: 08/2020, pressing speed: 11 mm/s, Equipment: documentation/manual, safety light barrier, For sale: fully operational and complete Ageo 160t hydraulic press. Full documentation and maintenance logbook are available. On-site inspection possible. VAT invoice provided. Iijdpeyxg D Hofx Ag Uec

Condition: excellent (used), functionality: fully functional, Eccentric press Inventory No. 01 Manufacturer: ter Hart Type: EP 25 Press force: 25 tons * Stroke adjustment: 6 to 60 mm * Adjustable ram: 35 mm * Table dimensions: 360 x 320 mm * Installation height: 275 mm * Overhang: 175 mm * Foot pedal operation * Connection: 1.5 kW Iedpfozcf Hysx Ag Usic * Weight: 850 kg * Control panel with emergency stop (2 units)

Condition: excellent (used), functionality: fully functional, Eccentric press Inv. No. 02 Manufacturer: ter Hart Type: EP 25 Pressing force: 25 tons * Stroke adjustment: 6 to 60 mm * Adjustable ram: 35 mm * Table dimensions: 360 x 320 mm * Installation height: 275 mm * Overhang: 175 mm * Foot pedal operation Iodpfx Aezcf E Asg Usic * Connection: 1.5 kW * Weight: 850 kg * Control panel with emergency stop (2 units!!!)

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 • Hydraulic presses for gluing construction timber and blockboards • Compact footprint with front loading • Chassis on wheels, two of which are steerable • Height-adjustable hydraulic cylinders with manual adjustment—practical and functional • Vertically adjustable columns with frame pressing device Technical data: Working surface(s): 1 Usable dimensions: 2500 x 1800 mm Number of vertical hydraulic cylinders with manual adjustment: 3 Number of horizontal manual hydraulic cylinders: 2 Travel of hydraulic cylinders with manual adjustment: 60 mm Pressure of hydraulic cylinders with manual adjustment: 1500 kg Installation dimensions approx. 3200 x 800 x 2200 mm Location: Flörsheim Availability: short notice Isdjkwhb Hopfx Ag Ueic

Year of construction: 2023, condition: used, Pressing force 53 t stroke 300 mm control Siemens Pneumatic system pressure 6 bar Maximum supply pressure of the pneumatic system 10 bar Pressure in the hydraulic system 255 bar Dimensions (HxWxD) 3.200 x 2.500 x 2.350 mm weight 8.000 kg Iedpozbvm Isfx Ag Uoic In our assessment, the bushing press is in like-new condition. Technical features: - Bushing pressing including plastic deformation - TOX pneumatic-hydraulic actuator with 53t pressing force at 6 bar - 300mm stroke - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 1982, A well-maintained Joos veneer press is for sale. Available from the end of June/beginning of July. Machine details: Press area: 2550mm x 1350mm Pressing force: 900kN Press chamber height: 400mm Number of cylinders: 4 Weight: approx. 3100kg Electric heating plates Ijdezczqnopfx Ag Ueic Operating pressure: 355 bar Gold anodized surfaces.

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 37 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 265 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 104 mm, table length: 3,700 mm, table height: 900 mm, throat depth: 410 mm, clearance between the columns: 3,100 mm, oil tank capacity: 250 l, total length: 5,300 mm, total width: 2,700 mm, total height: 2,750 mm, overall weight: 13,100 kg, Equipment: CE marking, safety light barrier, 2012 Durma AD-R 37175 CNC Press Brake – 175 Ton x 3700mm | CNC Advantage Control | Tooling Included Used 2012 Durma AD-R 37175 CNC press brake for sale. 175 ton, 3700mm, CNC Advantage control, tooling included. Manufacturer: Durma Model: AD-R 37175 CNC Pressbrake Control: Durma CNC Advantage Control Year: 2012 Capacity: 3.7m x 175T Condition: Good Description 2012 Durma AD-R 37175 CNC Press Brake – a high-performance, precision hydraulic press brake designed for efficient and accurate sheet metal bending. This machine offers excellent value for workshops looking for a reliable 175 Ton CNC press brake with strong capabilities and proven Durma build quality. Manufactured by Durmazlar (Durma), a globally recognised leader in sheet metal machinery, the AD-R series is known for robust construction, ease of use, and excellent performance-to-price ratio. 🔧 Key Features 175 Ton Bending Capacity 3700mm Bending Length Durma CNC Advantage Control (2D Graphic Programming) 3 Axis Machine (Y1, Y2, X – Powered) Manual R-Axis via Backgauge Fingers Motorised Backgauge with Linear Guides & Ball Screw System Ijdjy Ir D Depfx Ag Ueic European Style Clamping System Full Set of Top & Bottom Tooling Included Top Tool Hangers Included (Supplied, not shown in photos ⚙️ Technical Specifications Bending Force: 175 Ton Bending Length: 3700 mm Distance Between Columns: 3100 mm Stroke: 265 mm Daylight: 530 mm Throat Depth: 410 mm Table Width: 104 mm Table Height: 900 mm Speeds Y Rapid Feed: 120 mm/sec Working Speed: 10 mm/sec Return Speed: 100 mm/sec Backgauge X Axis Travel: 650 mm X Axis Speed: 500 mm/sec Backgauge Fingers: 2 (height adjustable) General Motor Power: 18.5 kW Oil Tank Capacity: 250 Litres Dimensions (L x W x H): 5300 x 2700 x 2750 mm Weight: 13,100 kg 💡 Machine Overview The Durma AD-R series is engineered for precision bending, low maintenance costs, and long-term reliability, making it an ideal solution for fabrication shops and industrial production environments. With a large daylight opening, generous stroke, and rigid frame construction, this machine is well suited for handling a wide range of sheet metal applications, from light fabrication to heavy-duty bending work. The CNC Advantage Control system provides: 2D graphical programming Automatic bend sequencing Easy part calculation USB program storage and backup User-friendly interface for fast setup and operation 🏭 Why Buy This Machine? Excellent price-to-performance CNC press brake Strong European build quality Ideal for steel fabrication, sheet metal workshops, engineering firms Complete with tooling – ready to go to work Reliable and simple CNC control – easy for operators 📦 Included with Machine Full Top & Bottom Tooling Set Top Tool Hangers (supplied) Sliding Support Arms Backgauge System Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, throat depth: 410 mm, total length: 5,305 mm, total width: 2,430 mm, total height: 2,840 mm, overall weight: 9,800 kg, travel distance X-axis: 750 mm, controller manufacturer: ESA, controller model: S660W, working width: 3,700 mm, bending force (max.): 175 t, back gauge: 750 mm, distance between stands: 3,200 mm, control type: CNC control, degree of automation: automatic, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, Equipment: CE marking, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, 2021 MVD A175-3700 Hydraulic Pressbrake with ESA S660W Graphic Control – Very Good Condition For sale is a 2021 MVD A175-3700 Hydraulic CNC Pressbrake, equipped with the advanced ESA S660W Graphic CNC Control. This machine is in very good condition, and is ready for immediate use in production. MVD are globally recognised for their high-precision sheet metal forming machinery, combining durability with operator-friendly CNC controls. The A175-3700 offers exceptional performance for fabricators, subcontractors, and manufacturing companies needing reliable and accurate bending of sheet materials. Machine Make: MVD Machine Model: A175-3100 Machine Type: CNC Pressbrake Machine Capacity: 3700 x 175T Machine Year: 2021 Machine Control: ESA S660W CNC Graphic Control ✅ Key Features 175-ton hydraulic pressbrake with 3700 mm bending length ESA S660W Graphic CNC Control – intuitive 2D/3D programming, touchscreen interface 4-axis CNC (Y1, Y2, X, R) for flexible production High precision crowning system for consistent bending angle Heavy-duty welded steel frame for stability and long-term accuracy European-style tooling system – quick and easy tool changes Safety light guards for operator protection Excellent condition – 2021 model, lightly used 📐 Technical Specifications – MVD A175-3700 Press Capacity: 175 tonnes Bending Length: 3700 mm Distance Between Frames: 3200 mm Stroke (Ram Travel): 210 mm Daylight Opening: 465 mm Throat Depth: 410 mm Table Width: 90 mm Axis Configuration: Y1, Y2, X, R (4-axis CNC) Control: ESA S660W Graphic CNC – touchscreen with 2D/3D programming Backgauge Travel: 750 mm Approach Speed: 180 mm/s Iiodpexddw Eefx Ag Uec Bending Speed: 10 mm/s Return Speed: 130 mm/s Main Motor Power: 15 kW Machine Dimensions (L×W×H): 5305 × 2430 × 2840 mm Weight: 9,800 kg 🌍 Condition Year of Manufacture: 2021 Control: ESA S660W Graphic CNC Axes: 4-axis (Y1, Y2, X, R) Condition: Very Good Ready for inspection and delivery 🔑 Summary This 2021 MVD A175-3700 Hydraulic CNC Pressbrake with ESA S660W Graphic Control offers 175 tonnes of power, 3700 mm bending capacity, and advanced multi-axis CNC control for accurate and repeatable bending. An ideal choice for workshops and production facilities requiring a reliable, modern, and precise pressbrake. Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2008, operating hours: 88 h, PCS-H: console for ink and register control with touch panel Electronic double sheet detection Electronic missing sheet detection Photocells Automatic ink regulation from console RyobiMatic-D: alcohol dampening with variable speed Technotrans refrigeration unit Iiodpjy H Elxefx Ag Uoc Automatic washing of blankets and rollers Semi-RPC: semi-automatic plate changer Circumferential, axial and diagonal registers Extended delivery High pile delivery GrafiX powder sprayer Books and tools 88 million impressions

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, PCS-G control desk, IVS - Ink Volume Setting, Grafix dry spray > RYOBIMATIC dampening system, Ryobi RPC semi-automatic plate change > Preset - automatic size device > Suction feed board > Automatic blanket, roller and impression-cylinder washing device > High pile delivery, non-stop delivery Technotrans LED UV dryer Interdeck between 1st and 2nd unit 45 million Iodpfxey Hx Ime Ag Ujic

Condition: excellent (used), functionality: fully functional, Torsion-resistant gantry construction for precision and service life – Foot release – Stack height 60 mm – Insertion depth approx. 100 mm behind the drills Isdpfx Ajyx Axaeg Uoic – Insertion width 480 mm – Drill length compensation – Hole diameter 2 – 20 mm – 1 to 4 drilling heads – Automatic table lift