Used Br 30 4 for sale (90,664)

Condition: used, Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 0.55 - 33 kW Casdpfjcvvy Eox Aflja -Speed: 30 - 2000 rpm -Shaft: Ø 45 mm -Construction: B3 -Protection class: IP 22 -External fan: 0.37 kW 2750 rpm 0.1 m³/sec -Dimensions: 1140/600/H520 mm -Weight: 346 kg

Condition: used, maximum load weight: 24,200 kg, overall weight: 30,000 kg, axle configuration: > 3 axles, first registration: 11/2011, Equipment: ABS, Manufacturer HFR Model 30 t. 4 axles Timber transport / Wood transport Year 2011 Condition Good Serial Number UH9PX301125HF1141 Ref. nr. 7949 Reg. date: 25-11-2011 Last seen: 10-12-2024 Disc brake: ? ABS: ? Rear axles: BPW Cedpew N Uuyjfx Afleaa Suspension: Air Tire Size: 265 / 70R19,5 Cover% left 100 - 100 - 80 - 100% Total weight: 30000 kg. Net weight: 5800 kg. Load capacity 24200 kg. Inside length: 7400 mm.

Condition: used, Year of construction: 1996, operating hours: 11,088 h, load capacity: 10,000 kg, lifting height: 5,000 mm, load center: 600 mm, Brand: Svetruck Model: 1060-30 Year of manufacture: 1996 Operating hours: approx. 11,088 h Load capacity: 10,000 kg Lifting height: 5,000 mm Load center: 600 mm Fuel: Diesel Volvo engine, 6-cylinder Condition: Good used (hydraulic pump replaced one year ago, hand brake caliper fully overhauled, forklift stored in dry conditions, equipped with two new tilt cylinders, new bolts, and pendulum bearing on the rear axle (steering) replaced). Cajdpfxoxbczds Aflsa Regular inspections carried out.

Condition: ready for operation (used), B&R Automation 8MSA3M.E3-30 servo motor Rev. D0 SN:68320217820, used, normal signs of use, 100% functional, scope of delivery as per photos Caedpfx Afowta Iuelsa

Condition: good (used), functionality: fully functional, Year of construction: 2014, operating hours: 6,000 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, Load capacity 3000 kg Linde H 30 Diesel Mast type: Triplex full free lift Year of manufacture: 2014 Operating hours: 6050 Codpfxoxlhbdj Afljaa Lift height approx. 5500 mm Overall height approx. 2500 mm 3rd + 4th valve, double auxiliary hydraulics Side shifter + fork positioner Looking for another forklift or high-lift truck? LPG, electric, diesel? Contact us and we will find the right vehicle for you. Errors and prior sale reserved. Sale to trade only, without warranty.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,702 h, load capacity: 3,000 kg, lifting height: 3,765 mm, free lift: 1,694 mm, fuel type: electric, mast type: duplex, construction height: 2,470 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Cajdpjvky Spofx Aflea Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Rear tires type: Superelastic Battery voltage: 80V Battery Ah: 775Ah Battery year of manufacture: 2018 Description: Side shift, 3rd valve, rear work light, front work light, half cabin, full free lift, CE certificate, LED,

Condition: used, Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread, lashing point , Loadbock thread with foldable rotatable load bracket unused Ovp -Type: VLBG 5 t M 30 Ident-No .: 850 08 13 -Carton: content 4 pieces -Quantity: 12 cartons available -Price: per box Codjg Akamepfx Afloaa -Weight: 15 kg / box

Condition: good (used), Year of construction: 2009, Double welding and cleaning line URBAN consisting of 2 four-head welding machines AKS 6910/4 - 30 /40, one with right-hand stop, one with left-hand stop, WINDOWS control, each with a URBAN TBA transport/cooling belt, transverse table with motor for removal of individual elements, URBAN SV 815 cleaning automatic with two heads, with infeed table and rotatable outfeed table, additional station for processing of corner and scissor bearing drillings as well as milling of elements with varying widths, buffer rack with tiltable shuttle table and two additional outfeed tables. Codpsw Niqpofx Aflsaa

Condition: used, Year of construction: 2006, gearing type: other, first registration: 01/2006, color: orange, mileage: 1,001 km, empty load weight: 1,100 kg, driver cabin: other, Vehicle location: Bovenden, clearing width 3000mm ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Cjdpfx Aor Hdhpoflsaa - .

Condition: ready for operation (used), B&R Automation 8MSA3M.E3-30 servo motor Rev. D0 SN:68320217821, used, normal signs of use, 100% functional, scope of delivery as per photos Caodokwig Uspfx Aflsa

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,301 h, load capacity: 3,000 kg, lifting height: 3,700 mm, fuel type: electric, mast type: simplex, construction height: 2,540 mm, fork carriage width: 1,100 mm, fork length: 1,200 mm, empty load weight: 5,553 kg, drive type: Elektro, construction width: 1,290 mm, Electric 4-wheel forklift Load center: 500 Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: As good as new Technical condition: Very good Front tires type: Superelastic Front tires Size: 23x9-10 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 18x7-8 Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: IBV Battery type: PzS Battery year of construction: 2021 Battery condition: 80 - 100% Description: Overhead guard with front and roof window, work lights front + rear, BlueSpot rear, rotating beacon, 3rd + 4th valve to fork carriage, 4x single lever Load protection grille, sideshift, integrated sideshift 3rd valve, 4th valve, rear working lights, front working lights, roof cover, windshield, load protection grille, safety light, interior mirror, rotating beacon, windshield wiper, single pedal, LED, seat, Cajdst Ddygspfx Aflea

Condition: used, functionality: fully functional, machine/vehicle number: FN 4806.., Year of construction: 2014, operating hours: 2,635 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,880 mm, fork length: 1,200 mm, empty load weight: 6,112 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: FN 4806.. Load centre: 500 Caodpfx Asr Hwtlefloa ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tyre type: superelastic Front tyre condition: 60 - 80% Rear tyre type: superelastic Rear tyre condition: 60 - 80% Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: JH Battery type: PzS Battery year: 2023 Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift,

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 30 rpm -Power: 0.75 kW -Diameter shaft: Ø 40 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 555/250/H250 mm -Weight: 40 kg Cedpfxjc Nvx Ie Aflsaa

Condition: used, functionality: unexamined, machine/vehicle number: 517383V00037, Year of construction: 2019, operating hours: 5,350 h, load capacity: 3,000 kg, lifting height: 2,986 mm, fuel type: diesel, Equipment: cabin, pallet forks, Manufacturer: STILL Model: RX 70-30 Year of manufacture: 2019 First commissioning: March 2019 Drive: Diesel Engine: VW, type BEF, 36 kW Load capacity: 3,000 kg Lifting height: 2,986 mm Operating hours: approx. 5,350 hours Tyres: SE tyres (front axle Continental 75%, rear axle Solideal 25%) Own weight: 4,581 kg Condition description: Age-appropriate good general condition, fully functional Seat upholstery damaged (see photos) Additional information: No guarantee or warranty Caedpowung Ijfx Aflea Important: The machine is sold in its current condition ("as seen").

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, working width: 3,100 mm, sheet thickness (max.): 25 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The lower, upper and side rolls move up and down linearly, operated by hydraulic pistons connected to the frame * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Rolled parts can be easily removed with hydraulically opening head and automatic lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) to support large-diameter bending * Hydraulic side supports to assist with large-diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending Capacity : 16/20 mm Bending Capacity : 20/25 mm Caedpfsxw Ecvox Aflea Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Bending Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 6,100 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, Equipment: clamp, pallet forks, Load capacity 3000 kg Linde H 30 Diesel Mast type: Triplex free lift Year of manufacture 2014 Operating hours 6050 Lifting height approx. 5500 mm Overall height approx. 2500 mm 3rd + 4th valve, double auxiliary hydraulics Rotator + fork positioner (clamp fork) Gross €24,871 / Net €20,900 Looking for another forklift or high-lift truck? LPG, electric, diesel? Contact us and we will find the right vehicle for you. Codpfx Aew Ebumsfljaa Subject to errors and prior sale. Sale only to commercial customers without warranty.

Condition: used, load capacity: 3,000 kg, lifting height: 7,650 mm, free lift: 2,610 mm, mast type: triplex, construction height: 3,220 mm, fork carriage width: 1,100 mm, fork length: 1,200 mm, empty load weight: 4,950 kg, total length: 2,430 mm, drive type: Elektro, construction width: 1,300 mm, Electric 4-wheel forklift Load center: 500 Fork width: 125 mm Fork thickness: 45 mm Mast type: Triplex Technical condition: Good Cajdot Ddwropfx Afloa Front tires type: Non marking Rear tires Type: Non Marking Hydraulic sideshift

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 13,000 h, load capacity: 3,000 kg, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,450 mm, gearing type: automatic, battery capacity: 775 Ah, battery voltage: 80 V, fork carriage width: 50 mm, fork length: 1,200 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23x9-10, rear tire type: superelastic tires (black), rear tire size: 18x7-8, Equipment: lighting, STILL RX 60-30 YEAR OF PRODUCTION 2007 Cjdpfxjv T Trbe Afleaa LOAD CAPACITY 3000 KG FOUR SECTIONS MTH 13000 ELECTRIC DRIVE BATTERY 80V/775 AH FROM 2018

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -3 phase motor voltage: 42/50 V Cajdofitfmspfx Aflea -Power: 0.12 kW -Speed: 25/30 rpm -Construction: B3 angle -Hollow shaft: Ø 19 x 35 mm -Protection class: IP44 -Dimensions: 390/200/H185 mm -Weight: 19 kg

Condition: good (used), Year of construction: 2010, Nestro Extraction System • Filter Unit Type: Nestro 7/4-30 Casdpfsw Ha Nrsx Aflea • 3-element intermediate filter unit with shaking motor cleaning system • with 3 dust collection containers • Filter Surface Area: 180 m² • Extraction Fan: 11 kW; 10,600 m³/h; 2500 Pa • Year of Manufacture: 2010

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 550 mm, roller (top) diameter: 550 mm, side roll diameter: 450 mm, roller length: 3,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 70 kW (95.17 HP), warranty duration: 12 months, Equipment: emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT Cajdpfoxbzptox Aflea * The bottom and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overloading * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * Easy roll position reading via three digital indicators * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft * Very user-friendly operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support when bending large diameters * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 5,500 h, load capacity: 3,000 kg, lifting height: 3,340 mm, free lift: 1,500 mm, fuel type: diesel, mast type: duplex, construction height: 2,350 mm, Load capacity 3000 kg Linde H 30 Diesel Mast type: Duplex free lift Year of manufacture 2017 Operating hours 5500 Lifting height approx. 3340 mm Overall height approx. 2330 mm 3rd & 4th valve, double auxiliary hydraulics Full cabin with heating Cjdpfx Aewu H Tgefloaa Net price 20900 Are you looking for a different forklift or high-lift stacker? LPG, electric, diesel? Contact us and we will find the right vehicle for you. Subject to prior sale and errors. Sale only to businesses, without warranty.

Condition: used, Gear motor, electric motor Cajdpect Tyqsfx Aflea -Speed: 30 rpm -Power: 0.45 kW -Construction: hollow shaft angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Brake -Number: 1x geared motors available -Price: per piece -Dimensions: 375/160/H275 mm -Weight: 12.5 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 3,100 mm, sheet thickness (max.): 20 mm, STANDARD EQUIPMENT * Lower, top and side rolls move up and down linearly via pistons hydraulically attached to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * The position of the rolls can be easily read with three digital displays * Rolled parts are easily removed thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC controls Codpfx Afow Smdfoleaa * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 12/16 mm Bending: 16/20 mm Top & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 1900 mm Height: 1950 mm Weight: 14,450 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, roller length: 3,100 mm, sheet thickness (max.): 30 mm, STANDARD EQUIPMENT * The bottom, top, and side rolls move linearly up and down via hydraulic cylinders connected to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor drive) * The positions of the rolls can be easily read via three digital displays * Thanks to a hydraulically opening head and an automatically lifting shaft, bent workpieces can be easily removed * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending device * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 – 320 – 350 – 380 – 400 – 460) * Electronic balancing system (Ø500 – 550 – 580 – 620 – 680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet extraction system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 – 320 – 350 – 380 – 400 – 460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Bending Capacity: 25/30 mm Top & Bottom Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg Caodjw Sl T Sjpfx Afloa