Used Braces for sale (468)

Condition: used, Year of construction: 1988, CRANE HALL with ADDITION 492 m² + 288 m² with 2 x 10-ton crane runways *for DIY enthusiasts* DEMAG, year of construction 1988 Crane hall (all dimensions are approximate) Width: 13.50 m Length: 36.50 m Eaves height: 8.89 m Ridge height: 9.25 m Roof slope: 3.05° Snow load at previous location: approx. 85 kg/m² Crane runways: 2 pieces Crane runway 1: 10 tons Cantilever at a height of: 8.85 m, the same for both cranes Hook height at 7.00 m, the same for both cranes Serial No. 1: Serial No. 88205500 Type FKKF, year of construction 1988 Drive motor 1 Crane runway 2: 10 tons Serial No. 2: Serial No. 88205510 Type FKKF, year of construction 1988 Drive motor 2 Addition Width: approx. 12.00 m Length: approx. 24.00 m Height: approx. 5.60 - 6.00 m Crane runway support provided for approx. 2.5 - 4 tons Equipment Supports: HEA 400, 14 pieces, 9.80 m, 17,150 kg incl. struts to truss, approx. 1.40 m Truss: IPE 400, 7 pieces, 10.70 m, 4,966 kg Iijdpoz Hlx Hjfx Am Dsh Gable wall supports Wall posts: IPE 140, 32 pieces, 6.00 m, 2,478 kg Pressure tubes roof: DN 80, 14 pieces, 6.00 m, 528 kg Gable wall supports Wind bracing in 3rd bay, 10 mm, 10 pieces, 6.23 m, approx. 23 kg Crane runway rails: 2 x 36 m 1 gable frame Supports: IPE 360, 3-4 pieces Pressure tubes: 90 mm, 11 pieces Corner supports: HEA 300, 3 pieces, 5.60 m The supports were cut off, 1 support was tapered, approx. 60 were embedded in concrete. Roofing: none Wall panels: none Windows: none Doors: none Gates: none Power cable crane runway: none Structural calculations / plans: none Lighting: none Crane runway drive, addition: none

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers sufficient space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 100.06 linear meters of shelving units, 40cm deep, used, workshop shelving, warehouse shelving, hand-stacking, boltless shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 100.06 linear meters Shelving offer of 100.06 linear meters consisting of: - 0101 x uprights approx. 200 x 40 cm, pre-assembled - 0600 x shelves approx. 100 x 40 cm. - 2400 x shelf supports. - 0100 x cross braces - Manufacturer: META CLIP. - Load capacity: 100 kg per shelf, with evenly distributed load. - Levels: 6 storage levels. - Surface: Sendzimir galvanized. - Used, available from stock Iiedpfx Amjz Slf He Djh -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €7,118.00 net plus legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery can be arranged via our partner logistics company, if desired. The costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Let us know your requirements... We will be happy to help you realize your projects, from planning to ordering to assembly. Are you interested or do you have any questions? Simply contact us via message or phone. You will find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: like new (used), Year of construction: 2016, machine/vehicle number: DN-KR29, DEMAG KBK overhead crane, dimensions approximately 24 x 6 m Load capacity / lifting capacity: 1 x 500 kg - 0.5 tons Technical data of the system: Overhead crane track made of Demag KBK2 / KBKII-H / KBKII-H-R rails Height of steel structure: 4.52 m (bracing) Top of steel structure (purlin): 4.38 m Bottom of steel structure (purlin): 4.24 m Bottom of crane track: 3.84 m Bottom of bridge: 3.6 m Hook height: 3.1 m External dimensions of steel structure (space requirement): 24 x 6 m Support spacing: 8.7 + 7.5 + 8.2 m Dimensions of overhead crane track: approximately 25 x 5.3 m The system is delivered complete: KBK rails, rail connectors Carriages, end plates, cable carriers, supports/hangers, etc. + complete steel structure (HEA140/U140) including Abus GM 500 kg chain hoist The crane is disassembled and packed on a pallet. Isdozv E Dkjpfx Am Djih Item location: 75053 Gondelsheim Very good condition - almost new. See photos. Shipping by freight forwarder or collection only by prior arrangement. Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: good (used), The scope of delivery includes: 1x used support strut Manufacturer: Mecalux Iedpei Dxxlefx Am Djih Material color: blue Length: approx. 1,057 mm Center-to-center distance of the boreholes: approx. 997 mm Borehole diameter: approx. 10.5 mm Cross-section: C 40x25x8 mm Weight: 1.150 kg | per piece General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately from us depending on the delivery location and scope.

Condition: good (used), The scope of delivery includes: Iodpfxei Dx Iie Am Djih 1x used upright frame strut Manufacturer: Mecalux Material color: blue Length: approx. 851 mm Center-to-center distance of borehole: approx. 795 mm Borehole diameter: approx. 10.5 mm Cross-section: C 40x25x8 mm Weight: 0.930 kg | each General information about the item: This item is offered for collection only. Any further transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: like new (used), Estimated stock level: approx. 840 pieces. We are offering a second-choice structural brace from the manufacturer SSI Schäfer for sale. Technical data for the structural brace: Shelving system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x Structural brace, second choice Material color: Sendzimir galvanized Overall length: approx. 1,270.0 mm Center-to-center hole distance: approx. 1,230.0 mm Iijdsh Eg Agopfx Am Deh Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Weight per piece: approx. 1.35 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), We are offering a second-choice structural support beam from the manufacturer SSI Schäfer for sale. Isdpfjh Eg Ansx Am Deih Technical data for the structural support beam: Shelf system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 1x Structural support beam, second choice Material color: Sendzimir galvanized Overall length: approx. 1,208.8 mm Center-to-center hole distance: approx. 1,168.8 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers ample space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 30.06 linear meters of shelving, 40 cm deep, used, workshop shelving, warehouse shelving, manual storage, plug-in shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 30.06 linear meters Shelving offer of 30.06 linear meters consisting of: - 031 x uprights approx. 200 x 40 cm, pre-assembled - 180 x shelves approx. 100 x 40 cm - 720 x shelf supports - 030 x cross braces - Manufacturer: META CLIP - Load capacity: 100 kg per shelf, with evenly distributed load - Levels: 6 x storage levels Ijdpsz Slbbjfx Am Doih - Surface: Sendzimir zinc-plated - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €2179.00 net plus applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged through our partner shipping company upon request; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Please let us know your requirements… We will be happy to help you with the implementation of your projects, from planning and ordering to assembly. Are you interested or have any questions? Simply contact us via message or phone call. Our phone number can be found on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), We are offering you a second-choice structural brace from the manufacturer SSI Schäfer for sale. Technical data for the structural brace: Shelf system: SSI Schäfer Type: PR 600 The scope of delivery includes: 01x Structural brace, second choice Material color: Sendzimir galvanized Overall length: approx. 1,249.2 mm Center-to-center hole distance: approx. 1,209.2 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope. Iiedpfx Aeh Eg Akem Doh

Condition: good (used), We are offering you a second-choice structural support beam from the manufacturer SSI Schäfer for sale. Technical data for the structural support beam: Shelf system: SSI Schäfer Type: PR 600 Iijdpfx Amjh Eg Acj Djh The scope of delivery includes: 1x structural support beam, second choice Material color: Sendzimir galvanized Overall length: approx. 1,304.4 mm Center-to-center hole distance: approx. 1,264.4 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Weight per piece: approx. 1.38 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the pallet racking system: Racking system: Jungheinrich Type: Esmena Technical data for the installation: Number of racking rows: 1 Length per racking row: 53,433 mm Number of bays per racking row: 5 Number of levels including the base level: 2 Technical data for the capacity: Pallet spaces per bay: 19 Number of pallet spaces per row: 228 Total number of pallet spaces: 288 Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in the scope of delivery: 20x Pallet racking uprights, used Material color: blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System hole spacing: 50 / 50 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Height: 6,000 mm Isdpoz Ng E Usfx Am Doih Depth: 1,100 mm 114x Pallet racking beam, used Material color: yellow Box profile: 116 x 40 mm Beam type: GNA 116x40 SEG5 Hook: 5 hooks Clear span: 2,707 mm Max. load per beam pair: 2,400 kg, with evenly distributed load. 228x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams to prevent unintentional lifting 80x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 20x Shimming plate, used Material: Fully galvanized For leveling the racking uprights that are installed on uneven ground 1x Load plate with information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), ABUS Hall Crane 500 kg Description: For sale is a professional, freestanding light crane system from market leader ABUS (HB system series), manufactured in 20. The system is in very good, clean condition, comes directly from ongoing operations, and is perfectly suited for workshops, metalworking shops, automotive repair shops, or welding stations to move loads up to 500 kg precisely and effortlessly. Technical data & details: Crane and lifting gear manufacturer: ABUS Kransysteme GmbH Hoisting unit model: Original ABUS ABUCompact electric chain hoist (factory number: ) Load capacity: Max. 500 kg (official ABUS marking on the bridge) Design: Freestanding structure made of solid I-beam steel supports. No ceiling or wall mounting required! Construction: High-strength bolted connections with large gusset plates and additional diagonal bracing for maximum static safety. Floor mounting: The columns have thick base plates for secure anchoring with heavy-duty anchors in the hall floor. Iedozrw Exepfx Am Djih Power supply: Professional, original ABUS cable management system (C-rail with cable trolley) for tangle-free power supply over the entire travel length. Operation: Includes the original ABUS floor control (crane pendant switch) with two-stage push buttons and an integrated emergency stop switch for precise operation directly from the floor. Condition: Disassembled and ready for loading Collection: Free of charge by the buyer Loading service: A forklift is available on site. We will gladly assist you free of charge with loading onto your transport vehicle. "Everything from one source: We will gladly offer you a suitable bank financing option for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: new, The scope of delivery includes: 01x Truss strut, new Manufacturer: Stow Material color: sendzimir galvanized Profile dimensions: C: 35 x 25 x 7.5 mm Length: approx. 1,154 mm Center-center hole: approx. 1,112 mm Ø drill hole: approx. 10 mm Weight: approx. 1.20 kg | pc. Currently available in stock: approx. 600 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Isdsta Ak Sspfx Am Djih General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, The scope of delivery includes: 01x Truss strut, new Manufacturer: Stow Material color: sendzimir galvanized Profile dimensions: C: 35 x 25 x 7.5 mm Length: approx. 1,287 mm Center-center hole: approx. 1,245 mm Ø drill hole: approx. 10 mm Weight: approx. 1.37 kg | pc. Currently available in stock: approx. 566 pcs. Your contact person in our company: Mr.: Andre Evering Ijdeta H Snopfx Am Djih Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, The scope of delivery includes: 01x Truss strut, new Manufacturer: Stow Material color: sendzimir galvanized Profile dimensions: C: 35 x 25 x 7.5 mm Length: approx. 1,035 mm Center-center hole: approx. 993 mm Ø drill hole: approx. 10 mm Weight: approx. 1.07 kg | pc. Currently available in stock: approx. 900 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: Ijdpfxetaui Ae Am Deih This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : Iijdpjz Syp Esfx Am Djh 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers ample space for the organized storage of boxes, containers, spare parts, and other stored goods. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 10.06 linear meters of shelving units, 40cm deep, used, workshop shelving, warehouse shelving, hand storage, boltless shelving, small parts storage Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 10.06 linear meters Shelving offer of 10.06 linear meters, consisting of: - 011 x uprights approx. 200 x 40 cm, pre-assembled - 060 x shelves approx. 100 x 40 cm - 240 x shelf supports - Incl. cross bracing - Manufacturer: META CLIP - Load capacity: 100 kg per shelf, with evenly distributed load - Levels: 6 x storage levels - Surface: Sendzimir galvanized - Used, available from stock -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €799.00 net plus applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged through our partner shipping company, if desired; the costs depend on the postal code. Assembly: Our trained personnel will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Please let us know your requirements... We will gladly assist you with the implementation of your projects, from planning and ordering to assembly. Isdpfx Aez Sk Tpem Djih Are you interested or do you have any questions? Simply contact us via message or phone. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: good (used), clear span: 2,700 mm, total length: 31,140 mm, total width: 1,100 mm, total height: 2,500 mm, load per truss pair (max.): 2,400 kg, Technical data for the pallet racking system: Racking system: META Thyssen Type: Multipal S Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 31,140 mm Number of bays per racking row: 11 bays, each 2,700 mm Number of levels including the base level: 02 Technical data for the capacity: Pallet spaces per bay: 09 Number of pallet spaces per row: 99 Total number of pallet spaces: 99 Ijdpfx Asz I Tfksm Deih Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in the scope of supply: 12x Pallet racking uprights, used Material color: Sendzimir galvanized Profile dimensions: 120 x 75 x 2.00 mm Including cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted frame) 2,500 mm high 1,100 mm deep 44x Pallet racking beams, used Material color: Yellow Profile dimensions: 100 x 50 mm Beam type: HN100|20 Connector: 3 HK Clear width: 2,700 mm Max. load per beam pair 2,400 kg, with evenly distributed load 88x Safety pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 48x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 24x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. Isdoz Sypfspfx Am Deih - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: good (used), Technical data for the pallet racking system: Racking system: Dexion Type: P 90 Technical data for the installation: Number of racking rows: 01 unit Length per racking row: 25,300 mm Number of bays per racking row: 09 units Number of levels plus base level: 03 units Included in the scope of delivery: 10x Pallet racking uprights, used Material color: hot-dip galvanized Frame profile: 100|25 Profile dimensions: 100x90x2.50 mm Adjustment grid: 50|50 mm including cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 6,000 mm high 1,450 mm deep 54x Pallet racking beams, used Material color: hot-dip galvanized Box profile: 160 x 50 mm Beam type: BX 160|50|2.0 Connector: 5 HK clear width: 2,700 mm max. load per beam pair 4,500 kg with evenly distributed load 108x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal supports against unintentional lifting out 01x Load sign with information on bay and shelf loads, Isdpfxszlyd Ro Am Dsih manufacturer and batch number Dimensions: 420 x 297 x 3 mm Note: Hot-dip galvanized surface – ideal for outdoor use Thanks to the high-quality hot-dip galvanized surface, the pallet racking system is optimally protected against corrosion and is therefore ideally suited for use outdoors. The galvanization ensures high weather resistance and a long service life – even under demanding weather conditions. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Iedpfx Amez Syq Nj Deih Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: used, clear span: 3,300 mm, total length: 37,320 mm, total width: 1,100 mm, total height: 2,200 mm, Technical data for the pallet racking system: Racking system: META (Thyssen) Type: Multipal S Technical data for the installation: Number of racking rows: 1 unit Length per racking row: approx. 37,320 mm Number of bays per racking row: 11 units, each 3,300 mm Number of levels including base level: 02 units Included in the scope of supply: 12x Pallet racking uprights, used Material color: Sendzimir galvanized Frame profile: SR85|20 Profile dimensions: 85 x 75 x 2.00 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) 2,200 mm high 1,100 mm deep 44x Pallet racking beams, used Material color: orange Beam type: HN100|20 Box profile: 100 x 50 mm Connector: 4 HK (hooks) Clear span: 3,300 mm Iodpfx Aoz I Sygsm Djih 88x Safety pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting out 48x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 24x Shimming plate, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: like new (used), Year of construction: 2018, Modular belt, belt length 2,450 mm, Kraus – used: Price ex works: only €3,950 (net), disassembled, packed, and loaded! Industrial conveyor belt with a robust, profiled frame design. Reliable and robust, it is suitable for: • Transport of molded parts, • Machine discharge of components for removal (integrated/partially integrated/self-contained), • Transport of various materials Manufacturer: Kraus Betriebsausstattung und Fördertechnik GmbH, AT-Klagenfurt Type: FB 90 MODUL Year of manufacture: 2018 Technical data: Maximum total load capacity: 100 kg Conveyor speed: 2 m/min Belt length: 2,450 mm, overall length approx. 2,600 mm Frame width: 1,300 mm Belt width: 1,200 mm Height: approx. 920 mm Belt design: Modular belt 1" PP/grey FDA Drive: Gear motor, SEW 230/400V – 50Hz, IP54 Installation position: Floor Design: Frame: galvanized profiles with bolted cross braces Connection cables for connecting to a machine / Harting connector Installed signal cables for 2 x light barriers / Harting connector Original new price: €7,000 (net) Condition: Like new, scratches on the motor housing Operating hours: < 100 operating hours Available: immediately Location: Warehouse Frankenberg / Saxony Iiedpfx Amoz I Eino Djh

Condition: good (used), clear span: 2,775 mm, total length: 17,350 mm, load per truss pair (max.): 1,023 kg, Technical data for the pallet racking system: Racking system: Jung Heinrich Type: Esmena Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 17,350 mm Number of bays per racking row: 6, each 2,775 mm Number of levels including the base level: 6 Technical data for the capacity: Pallet spaces per bay: 21 Pallet spaces per racking row: 126 Total pallet spaces: 126 Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: not specified Weight per pallet (max.): approx. 341 kg Included in the scope of supply: 07x Pallet racking uprights, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System hole pitch: 50 / 50 mm incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted truss) Height: 9,000 mm Depth: 1,100 mm 72x Pallet racking beams, used Material color: orange Box profile: 85 x 40 mm Beam type: GN85x41 Connector: 5 hooks Clear width: 2,775 mm Max. load per pair of beams: 1,023 kg, with evenly distributed load. 144x Locking pins, used Material color: Sendzimir zinc-plated For securing the longitudinal members Iodpfx Amjz A D Dge Deih against unintentional lifting out. 28x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, zinc-plated Approved for: cracked concrete 14x Shims, used Design: completely zinc-plated For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Iiedpfx Ajz Sypxem Doh Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.