Used Bracket-With Shaft for sale (7,623)

Condition: used, Year of construction: 2015, operating hours: 4,186 h, 2015 | Hitachi ZX48U-5A CLR with 3 excavator buckets | Used Tracked Excavator | 4186 hours Bsdpfx Aox Trmpjaaolf 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 29900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 61 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: well-maintained machine, boom newly re-pinned 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40014 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2015, 2015 | MAN TGX 18.480 4x2 BLS WITH TIPPER HYDRAULIC AND GOOD TIRES | Used Tractor Unit | 396459 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 28 inspection points 28 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The MAN truck was in good condition at the time of the inspection, however, most of the tires need to be replaced. The rear left mudguard is torn off. Unfortunately, the trailer could not be detached, which limited the inspection of the truck. Tilting the driver's cabin was not possible due to the lack of tools, so an inspection of the engine could not be performed. The truck is equipped with a double-acting hydraulic system with two lines and an additional pump designed for a Walking Floor. The total height with the cabin spoiler mounted is 3.9 m. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31325 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Bledsyaik Djpfx Aaaof ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), mileage: 646,000 km, power: 100 kW (135.96 HP), first registration: 10/1994, fuel type: diesel, tire size: 9.5R17,7, axle configuration: 4x2, wheelbase: 3,150 mm, fuel: diesel, fuel tank capacity: 100 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro2, suspension: steel, loading space length: 4,250 mm, loading space width: 2,400 mm, loading space height: 2,100 mm, Year of construction: 1994, Equipment: spoiler, tail-lift, = Additional Options and Equipment = - 5-speed manual gearbox - Heated exterior mirrors - Leaf spring suspension - Comfort driver's seat - Roof spoiler - Main battery switch - Radio/CD player = Remarks = GOOD CONDITION MERCEDES-BENZ 914K ECOLINER (6-CYLINDER) 4x2 FULL STEEL CHASSIS WITH TARPAULIN BOX, ALUMINIUM SIDE BOARDS, MANUAL GEARBOX & STEEL SUSPENSION!! 140HP, 6-CYLINDER ENGINE!! 5-SPEED MANUAL GEARBOX!! STEEL SUSPENSION!! ROOF SPOILER!! ETC.!! DAUTEL TARPAULIN BOX: LENGTH x WIDTH x HEIGHT approx. 4.25 x 2.40 x 2.10 m!! SORENSEN AST 1004 1,000 KG TAIL LIFT!! ALUMINIUM SIDE BOARDS!! GOOD RUNNING TRUCK, READY FOR HEAVY TRANSPORT JOBS!! MORE MERCEDES-BENZ 4x2 / 6x4 / 6x6 / 8x4 / 8x8 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! Blodpfowv D Dfjx Aaasf SHIPPING, STACKING, TRANSPORT, TRANSIT REGISTRATION OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR WEBSITE FOR OUR CURRENT STOCK; YOU CAN ALSO VIEW OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical information Number of cylinders: 6 Engine displacement: 5,958 cc Transmission Gearbox: 5-speed manual gearbox, 5 gears, manual transmission Axle configuration Brakes: Drum brakes Suspension: Leaf springs Front axle: Tire size: 9.5R17.7; Max. axle load: 3,700 kg; Steering axle; Tire tread left: 70%; Tire tread right: 70% Rear axle: Tire size: 9.5R17.5; Twin tires; Max. axle load: 6,280 kg; Tire tread inner left: 90%; Tire tread outer left: 90%; Tire tread inner right: 90%; Tire tread outer right: 90%; Reduction: single reduction Weights Unladen weight: 3,300 kg Payload: 5,700 kg Gross vehicle weight: 9,000 kg Functional Tail lift: SORENSEN AST 1004 1,000 kg, rear tailgate, 1,000 kg Body make: DAUTEL tarpaulin box with aluminium boards and loading platform Loading platform height: 83 cm Condition Technical condition: very good Optical condition: very good Further information Please contact our Sales Department or Erik Engel for further information.

Condition: new, axle configuration: > 3 axles, loading space width: 3,000 mm, loading space height: 1,170 mm, total width: 3,000 mm, total height: 1,170 mm, suspension: hydraulics, tire size: 215/75R17.5, wheelbase: 1,500 mm, color: red, Year of construction: 2026, Main Features Year: New Universal Gooseneck SH 35/2 Loading platform: 3,700 mm x 2,440 mm 3.5 inch king pin Hydraulic lifting and lowering Hydraulic support cylinders Coupling height: 1,450 mm Integrated lashing points Lashing rings Spare wheel + spare wheel holder Hydraulic locking pin Automatic lubrication for gooseneck with Beka-MAX pump Hatz Diesel PPU Hatz single-cylinder diesel engine (silent pack) @ 9.6 kW 240 L hydraulic oil tank, powder coated 35 l/min flow rate and max. working pressure of 250 bar Three sizes of quick couplers for pressure connection Three sizes of quick couplers for tank connection Electric RPM control THP SL 3 Max. axle load: 45,000 kg per axle Total axle load: 3 x 45,000 kg = 135,000 kg GVW: 135,000 kg Unladen weight: 10,650 kg Payload: 124,350 kg Total length: 4,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 4 Max. axle load: 45,000 kg per axle Total axle load: 4 x 45,000 kg = 180,000 kg GVW: 180,000 kg Unladen weight: 13,850 kg Payload: 166,150 kg Total length: 6,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 5 Max. axle load: 45,000 kg per axle Total axle load: 5 x 45,000 kg = 225,000 kg GVW: 225,000 kg Unladen weight: 17,250 kg Payload: 207,750 kg Total length: 7,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 6 Max. axle load: 45,000 kg per axle Total axle load: 6 x 45,000 kg = 270,000 kg GVW: 270,000 kg Unladen weight: 19,800 kg Payload: 250,200 kg Total length: 9,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) Low Profile Deck FB 300 - 10,000 mm, without mechanical coupling, non-driveable - Payload rating in combination (6+6): 300 t - Height 300 mm, length 10,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use Bljdpex S Evbofx Aaaof - Bogies for modular configuration - Dead weight approx. 21,300 kg - Incl. hydraulic locking pin for connecting modular bogies lengthwise 1 x Low Profile Deck FB 250 - 8,000 mm, with mechanical coupling, non-driveable - Payload rating in combination (6+6): 170,000 kg - Height 250 mm, length 8,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - 1x extension for low profile deck, 4,000 mm - 1x extension for low profile deck, 5,000 mm General Information Year of construction: 2026 Axle Configuration Tyre size: 215/75 R17.5 Axle brand: BPW Eco Plus Suspension: hydraulic suspension Center axle 1: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 2: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 3: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 4: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 5: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 6: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Functional Deck height: 117 cm Extendable chassis: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Damages: none Financial Information...

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, TABLE Surface (mm): 1400×1200 T-slot / Width / Distance (mm): 9(11) / 22 / 125 Max permissible load (kg): 8000 Auto indexing, continuous (°): 0.001 TRAVEL Longitudinal (mm): 2500 / 3000 / 4000 Cross (mm): 1050 / 1250 (with flat ram) 1000 / 1250 (without flat ram) Vertical (mm): 1450 FEED Axis feed (mm/min): 5000 Rapid traverse (mm/min): 12000 (X, Y) 10000 (Z) 6 (C) Drive motor (Nm): T1400×1200: 50 (X), 27 (Y, Z), 50 (C) SPINDLE Taper: ISO50 Speed (rpm): 4000 2-step: 0–1000 / 1001–4000 Drive motor (kW): 28 / 38 WEIGHT Machine weight (kg): 30000 Bedpfsyfmtaex Aaaslf

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Bodpsu Ixt Dsfx Aaaslf

Condition: good (used), Nice Formax F19 former with touchscreen controls. Well maintained machine direct from European burger factory. With Tenderform Bjdpoqaz R Uefx Aaajlf

Condition: good (used), Year of construction: 2008, Built in: 2008 Size: max 320 x 320 mm; min 150 x 145 mm Cover size: max 660 x 320 mm; min 225 x 135 mm Book block thickness: max 65 mm Weight: 2,100 kg Cover thickness: 80-300 g/qm Pile height: max. 150 mm Speed: max 1,350 c/h Bljdpfx Aju R Hxgjaaef Type of current: 400/50 V/Hz Overall dimensions: w x h x l 3.610 x 2.910 x 1.80 mm Equipment perfect binder: - 4 clamps - milling station with pressing roller - hotmelt spine gluing unit - hot melt side gluing unit - PUR gluing unit - Premelter for PUR gluing unit .

Condition: new, Year of construction: 2019, pressing force: 400 t, pressure:400 t distance between columns:2500 mm stroke:600 mm Table dimensions:2500 x 2000 mm distance table - lower edge of ram:600 mm total power requirement:18 kW speed of forward flow:9 mm/sec Return Speed:19 mm/sec :67 Lt./min. Total weight, approx.:26 t Bodpjd Ttydofx Aaajlf

Condition: excellent (used), mileage: 128,632 km, power: 165 kW (224.34 HP), first registration: 06/1988, fuel type: diesel, tire size: 13R22,5, axle configuration: 4x4, fuel: diesel, color: orange, gearing type: mechanical, number of gears: 6, emission class: euro2, suspension: steel, loading space length: 5,050 mm, loading space width: 2,500 mm, Year of construction: 1985, Equipment: crane, differential lock, seat heater, = Additional Options and Accessories = - All-wheel drive - Heated mirrors - Passenger bench seat - Leaf suspension - Comfort driver's seat - Differential lock - Differential lock - Speed limiter - Hydraulic system - Hub reduction - Radio/CD player - Sun visor - Toolbox - PTO (Power Take-Off) - PTO (Power Take-Off) = Remarks = PERFECT CONDITION MERCEDES-BENZ 1622AK (V6) 4x4 FULL STEEL SUSPENSION CHASSIS WITH HMF 1003K2 CRANE, MANUAL GEARBOX & REDUCTION AXLE!! 220HP, V6 ENGINE!! ZF6 GEARS MANUAL GEARBOX!! FULL STEEL SUSPENSION!! REDUCTION AXLE!! P.T.O.!! SUN VISOR!! 3RD SEAT!! ETC.!! HMF 1003K2 CRANE MOUNTED ON REAR OF CHASSIS (2 HYDRAULIC EXTENSIONS)!! 4x STORAGE BOXES!! RACK FOR OVERSIZE LENGTH ABOVE CAB!! TRUCK IS IN CLEAN & GOOD WORKING AND DRIVING CONDITION, READY FOR (ELECTRICAL) JOBS!! MORE MERCEDES-BENZ 4x2 / 4x4 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A “ONE STOP SHOP” COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ENGEL TRUCKS; “YOUR GLOBAL TRADING PARTNER” = Further Information = Transmission Transmission: ZF 6-speed manual gearbox, 6 gears, manual transmission Axle configuration Brakes: Drum brakes Suspension: Leaf suspension Front axle: Tire size: 13R22.5; Differential lock; Max. axle load: 7,500 kg; Steered; Tire tread left: 90%; Tire tread right: 90%; Reduction: single reduction Rear axle: Tire size: 445/65R22.5; Differential lock; Max. axle load: 11,500 kg; Tire tread left: 90%; Tire tread right: 90%; Reduction: outboard planetary axles Weights Unladen weight: 10,700 kg Payload: 8,300 kg Gross vehicle weight: 19,000 kg Functional Mast: Telescopic Bodpfx Aaeyrhgbjaolf Lifting capacity: 10,000 kg Superstructure brand: HMF 1003K2 CRANE Condition Technical condition: very good Visual condition: very good Further information Please contact Sales Department or Erik Engel for further information.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM Bsdpfx Aex Imqljaaelf • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm Additional equipment • Iemca KID 80/16 Plus bar feeder (2022) — KID 80 included • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets Blodpex D Rvnefx Aaajf

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 16,000 rpm, This HELLER MC 16 with pallet pool was manufactured in 1999. It features a Control Uni Pro system, a 120-tool magazine, and an HSK-63A tool holder. The spindle operates at a speed of 16,000 rpm. Consider the opportunity to buy this HELLER MC 16 horizontal machining centre. Contact us for more information. Bledpfx Aaox D Iz Uoajf

Condition: ready for operation (used), 40 mm x 40mm x20 mm cutting €5 each Bedpfeyhnqlsx Aaajlf

Condition: used, axle configuration: 3 axles, first registration: 11/2011, total length: 13,710 mm, total width: 2,550 mm, suspension: air, tire size: 445/40R22.5, wheelbase: 9,110 mm, Year of construction: 2011, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 445/40R22.5 Axle make: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: tyre tread left: 20%; tyre tread right: 20% Rear axle 2: tyre tread left: 20%; tyre tread right: 20% Rear axle 3: tyre tread left: 20%; tyre tread right: 20% Weights Unladen weight: 6,500 kg Payload: 32,500 kg Bjdpoycgq Tofx Aaajlf Gross vehicle weight: 39,000 kg Functional Loading platform height: 120 cm Condition Damages: none Identification Registration number: OL-66-LH

Condition: used, DAEWOO PUMA 300 LB (Doosan) 2-axis CNC lathe CNC Fanuc 18T Hydraulic tailstock Condition: very good. This machine can be inspected in our warehouse, under power. Blsdpoqfm A Aofx Aaaef Mimu machine tools Italy

Condition: ready for operation (used), Year of construction: 1981, power: 45 kW (61.18 HP), cutting height (max.): 200 mm, shaft diameter: 65 mm, chain width: 340 mm, Double-shaft multiblade saw Manufacturer: Raimann Model: KD Chain width: 340 mm Cutting height: 200 mm Saw motors: 2 x 45 kW Shaft diameter: 65 mm Electric height adjustment Bedoyhlubjpfx Aaaelf Transport chain with spikes Feed system modernised to stepless speed adjustment via potentiometer, approx. 0 to 40 m/min. Includes 3 saw sleeves with saw blades, some fitted with new saw blades.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, overall weight: 71 kg, number of blades: 3, total length: 775 mm, total height: 370 mm, total width: 320 mm, power: 2.2 kW (2.99 HP), rotational speed (max.): 1,400 rpm, For sale is a Hunkeler Z 25/3 shredder unit, designed for integration into pneumatic extraction pipework systems. This device is ideally suited for shredding continuous edge trims from paper, cardboard, and plastics, making it perfect for use in printing plants, bookbinding operations, and industrial finishing facilities. Technical data: Type: Z 25/3 Blodpfx Ajyx S E Noaasf Manufacturer: Hunkeler (Switzerland) Version: For installation in extraction duct systems Rotor: 3 HSS blades Stator: 1 HSS blade, single-row adjustable Pipe connection / air passage: Ø 250 mm Electric motor: 2.2 kW Rotor speed: 1,400 rpm Construction: Robust welded design Mounting: Four-sided mounting Bearings: External flange bearings with grease nipples Weight incl. motor: approx. 71 kg Dimensions (L × W × H): approx. 775 × 320 × 370 mm Colour: RAL 7035 Condition: Lightly used, fully functional, minimal signs of use Delivery terms: EXW – ex location, Worb, Canton of Bern, Switzerland Without warranty or guarantee Immediately available Inspection possible by arrangement Collection by buyer The machine was installed in 2015 and verifiably used very little. Original price approx. EUR 14,300. Sales price EUR 5,900 excl. VAT.

Condition: used, axle configuration: 3 axles, first registration: 11/2016, total length: 14,040 mm, total width: 2,600 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 8,760 mm, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - Refrigeration/deep-freeze unit - Air suspension - Disc brakes = Further information = Bledjyn Hxnspfx Aaaof Axle configuration Tire size: 385/65 R 22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: left tire tread: 40%; right tire tread: 40% Rear axle 2: left tire tread: 30%; right tire tread: 30% Rear axle 3: left tire tread: 50%; right tire tread: 50% Weights Unladen weight: 8,850 kg Payload: 33,150 kg Gross vehicle weight: 42,000 kg Functionality Loading platform height: 115 cm Refrigeration unit engine: Diesel and electric (8,798 operating hours diesel; 494 electric) Condition Damages: none Identification Registration number: OP-20-LV

Condition: used, axle configuration: 3 axles, first registration: 05/2017, total length: 14,040 mm, total width: 2,600 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 8,760 mm, Year of construction: 2017, Equipment: ABS, tail-lift, = Further Options and Accessories = - Cooling / deep-freeze unit - Air suspension = Further Information = Axle configuration Tire size: 385/65 R 22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread left: 20%; Tire tread right: 20% Rear axle 2: Tire tread left: 30%; Tire tread right: 30% Rear axle 3: Tire tread left: 40%; Tire tread right: 40% Weights Unladen weight: 9,770 kg Bledpeyn Hxhjfx Aaaof Payload: 32,230 kg Gross vehicle weight: 42,000 kg Functional Loading platform height: 115 cm Refrigeration unit: Diesel and electric (12,325 operating hours diesel; 677 electric) Condition Damage: None Identification Registration number: OP-07-TZ

Condition: used, axle configuration: 3 axles, first registration: 11/2015, total length: 10,240 mm, total width: 2,600 mm, suspension: air, tire size: 385/55 R 22.5, wheelbase: 7,480 mm, Year of construction: 2015, Equipment: ABS, = Additional options and accessories = Bjdpfx Asyn Hwwoaaelf - Rear doors - Lift axle - Air suspension = Further information = Axle configuration Tyre size: 385/55 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Middle axle 1: Tyre tread left: 30%; Tyre tread right: 30% Middle axle 2: Tyre tread left: 30%; Tyre tread right: 30% Middle axle 3: Tyre tread left: 30%; Tyre tread right: 30% Weights Unladen weight: 6,720 kg Payload: 17,280 kg Gross vehicle weight: 24,000 kg Functionality Loading platform height: 120 cm Cooling engine: Diesel and electric Condition Damages: none Identification Registration number: 72-WN-LR

Condition: good (used), Year of construction: 2011, functionality: fully functional, overall weight: 30,000 kg, power: 250 kW (339.91 HP), input voltage: 400 V, Stationary shredder LINDNER Jupiter 2200. Electric drive: 250 kW Bjdpfx Aouv Htueaaslf Including switch cabinet and hydraulic unit.

Condition: used, Year of construction: 2005, operating hours: 3,600 h, 2005 | JCB 535-140 with forks and loading bucket | Used Telescopic Forklift | 3600 hours Bedpfxsx Ti Uds Aaaolf 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 34500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 59 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The unit functioned during inspection recommended full service and filters 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40116 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2017, operating hours: 8,267 h, 2017 | Volvo ECR145EL with Steelwrist rototilt and 2 buckets | Used Tracked Excavator | 8267 hours 📍Location: France, La Chapelle-du-Bois 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 65000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 69 inspection points 65 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ Blsdpfex N Syzjx Aaaef 📌 Inspector's Comment: The machine was in working order at the time of inspection. The window and the broken claw of the grapple will be repaired before the sale. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40039 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2017, operating hours: 8,562 h, 2017 | Hyundai HX300 NL with a bucket | Used Tracked Excavator | 8562 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 52500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 48 approved ✅ 16 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: Well-used excavator, undercarriage needs to be tightened. Hydraulic oil pump makes a grinding noise, hydraulic oil level low, swing brake no longer functioning properly, much play on boom pin, small coolant leakage at vent valve, overpressure system does not build up sufficient pressure, otherwise an operational machine. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39020 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Blsdpfx Aasyiy R Heaof We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.