For further information please contact the seller.
Bqlg8uaflg
One-man pressure brake and clutch bleeding system suitable for the professional workshop. Low pressure tank (20-40psi) can be pre-charged with compressed air - making the unit fully portable. Large reservoir means reduced risk of running the system dry during bleeding process or complete fluid change. Suitable for use on ABS systems. Supplied with a range of European, Japanese and US vehicle adaptors.
Epsf83gx
Operateur Control.Serial No. B971002
Control Operateur
Back gauge Programmable
Guards Sick
Capacity 25 ton x 1200mm
Maximum length of bend 1200mm
Between frames 1000mm
Daylight 320mm
Throat depth 200mm
Bed width 60mm
Input 415/3/50hz
Actuated via Wander type footswitch
Fitted with Rear & side guards
X=Back gauge in/out X
Y=Beam rise & fall Y
R=Fingers rise & fall R1, R2
Length 2100mm
Width 1600mm
Bmpyylqzar
Height 1860mm
Nett weight actual. 2,000 Kgs. / 2 Tons.
Technical data baler
Manufacturer Presto GmbH & Co. KG
Typ CC 40 V
Year of construction 2012
Hours of operation 6,924 hours
Press power main press 40 tons
Specific press capacity 48,5 N/cm²
Feed channel 1,080 x 1,100 mm
Capacity per cycle time 0,85 m³
Theoretic cycle time 34 sec.
Theoretic throughput rate 90 m³/hour
Throughput capacity under operating conditions 72 m³/hour
Sound pressure level in operation (LpA) 65 dB
Bale size 750 x 1,100 mm
Bale weight up to 400 kg, depending on material
Driv...
- Tonnage 100 ton
- Bending length 3100mm
- Stroke 215mm
- Bending speed 1 to 10 mm/sec
- Cybelec 600 control
- Y1, Y2, X, R
- Manual fingers
- Laser guards
- Side rear fences
2svwae
- Back gauge 700mm
- Approach speed 100mm/sec
- Bend speed 10mm/s
- Return speed 200mm/s
- Repeatability +/- 0.01mms
- Year of manufacture 1998
- Tooling
Bending tool holder for bending tool, die, upper knife, upper tool, deer foot tool
-Tool: for press brake
-Intermediate holder
-Number: 4 holders available
Xuc0apbik
-Price: per piece
Weight: approx. 4 kg/piece
* General * SKUR0447 * LocationBarneveld * MakeAZO GmbH & Co KG (D) * TypeD80XD100/D350 * No.1244152-01 * Year of construction2015 * Floorspace1,0x0,8 M * Total height0,6 M * Weight100 Kg * Extra SpecificationsThis docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspec...
With 3 Axis Cybelec Euro ControlSerial No. 2617
Control Cybelec Euro
Back gauge Programmable
Guards "Sick"
Capacity 100 ton x 4100mm
Maximum length of bend 4100mm
Between frames 3700mm
Daylight 380mm
Throat depth 250mm
Stroke length 150mm
Input 415.3.50 ac 7.5kw approx
Tooling 3300mm long top and bottom tooling
Actuated via Wander type foot switch
X=Back gauge in/out X
Y=Beam rise & fall Y1, Y2
Length 17'2" \ 5.23m
Width 6'2" \ 1.87m
3wn9l7ry
Height 8'4" \ 2.54m
Nett weight approx 9.93 tons \ 1...
output 30 Kva
weight of the machine ca. 0,15 t
Be7xs9piqc
- Tonnage 80 ton
- Bending length 2550mm
- Stroke 200mm
- Bending speed 1 to 10 mm/sec
- Nisshinbo CNC with graphics
- Y1,Y2, X, R, Crowning
- Light guards side rear fences
- Side rear fences
- Back gauge 700mm
- Approach speed 100mm/sec
- Bend speed 10mm/s
- Return speed 200mm/s
- Repeatability +/- 0.01mms
P7mro23h
- Year of manufacture 1997
- Can be seen working at ay time
Bending tool, die, upper knife, upper tool, upper beam
-Tool: for folding machine
-Dimensions: 60 x 15 mm
-Length: 1020 mm
Voioo
-Weight: 6 kg
* General * SKUR0451 * LocationBarneveld * MakeAZO GmbH & Co KG (D) * TypeD128/D350 * No.1097198 * Year of construction2012 * Material * MaterialStainless steel * Information * Floorspace1,0x0,8 * Total height0,6 M * Weight100 Kg * Extra SpecificationsThis docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destin...
With Amada ANMB Control. Manufactured 2012Serial No. K100362
Control Amada ANMB
Back gauge Yes
Guards Sick C-4000
Capacity 130 ton x 3000mm
Maximum length of bend 3130mm
Between frames 2700mm
Daylight 200mm
Throat depth 420mm
Stroke length 200mm
Input 415/3/50hz 12.5 kW / 21.3 Amp
Tooling full length segmented top tooling 3 x 840mm, 2 x 300mm, 1 x 200mm & bottom
Actuated via wander foot switch
Bfi2iziwfr
Fitted with side guard, rear guard
X=Back gauge in/out X1, X2
Y=Beam rise & fall Y1, Y2
...
axis 2 Stück
Gvvzag
1 x Elektronic Motor Braking Unit
Power range 3 - 15KW
Voltage range 200-575V
Power frequency 50Hz/60Hz
Btwveo38l0
Siemens EMG 15
Welding device, welding device
-Transfer in current condition as seen
-pneumatic: exciting
-Dimensions: 210/170/H370 mm
Mankh
-Weight: 11.3 kg
* General * SKUR0444 * LocationBarneveld * MakeAZO GmbH & Co KG (D) * TypeD100/D350 * No.1098984 * Year of construction2012 * Floorspace1,0x0,8 M * Total height0,6 M * Weight100 Kg * Extra SpecificationsThis docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our m...
With Cybelec DNC90 Colour CNC Control.Serial No. 92 3129
Control Cybelec DNC 90
Back gauge Programmable
Guards Sick
Capacity 600 ton x 5100mm
Maximum length of bend 5100mm
Between frames 4600mm
Throat depth 400mm
Stroke length, Max 365mm
Input 415/3/50hz, 40kW
Tooling Full length multi vee bottom - 5.1m x 250mm x 250mm. Vee sizes 200mm, 150mm, 100mm, 76mm, 38mm
Actuated via Wander type footswitch
Bgovrgwtoq
Pit required Yes
Fitted with Rear & side guards, crowning
X=Back gauge in/out X
Y=Beam ...
swing dia. over long. slide mm
spindle turning speed range U/min
diamond disc diameter mm
total power requirement 1,5 kW
Benjj9tkgf
Weight kg
max. width of grinding wheel 50 mm
ratio 0
max. dia. of grinding wheel 400 mm
weight of the machine ca. 0,35 t
dimensions of the machine ca. 1x1x1,3 m
Pre-Dressing Device for Gear Grinding Wheels
1 x Elektronic Motor Braking Uniat
Power range 3 - 15KW
Voltage range 200-575V
Power frequency 50Hz/60Hz
Btwvdsjnpx
Siemens EMG 15
Motor brake for Weinig machine
Container turning device, welding turning device, roller block, rotators, pipe straightening system
-Pipe straightening system for: steel pipes, with flame and water cooling flame straightening
-Drainage channel and water pump
W7adnaabu
-Roll diameter: Ø 180 mm
-Drive: PIV gearbox
-electric: adjustable
-Load capacity: 1 to
-Speed: min. 50 mm/min
-Speed: max. 150 mm/min
-Hand switch
-Counter bearing: laterally adjustable
-Dimensions drive: 3600/820/H850 mm
-Dimensions counter bearing: 2950/820/H...
* General * SKUR0446 * LocationBarneveld * MakeAZO GmbH & Co KG (D) * TypeD100/D350 * No.1098984 * Year of construction2012 * Floorspace1,0x0,8 M * Total height0,6 M * Weight100 Kg * Extra SpecificationsThis docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our m...
Cybelec DNC90 4 Axis Colour Control,Serial No. 92P089
Machine No. 971
Control Cybelec DNC90
Back gauge Programmable
Guards side & rear
Capacity 125 ton x 4100mm
Maximum length of bend 4100mm
Between frames 3740mm
Throat depth 320mm
Maximum Stroke 215mm
Input 415/3/50hz
Actuated via Wander type footswitch
Fitted with Rear & Side guards
X=Back gauge in/out X
Nshcr
Y=Beam rise & fall Y1 Y2
R=Fingers rise & fall R
Length 5000mm
Width 2700mm
Height 2500mm
Nett weight actual. 12,590 Kgs. / 12.4 Tons
pressure 160 t
chamfer lenght 5.500 mm
distance between columns 4.250 mm
rear stop
Rvc9juae
weight of the machine ca. 20 t
Condition Used
Listing name JOKAB SAFETY JSHD4 Safety Control Device
This listing is for two JOKAB SAFETY JSHD4 three-position Safety Control devices and cabling. Both in excellent condition, one unused. SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’.ID: FFNL014
Jbrkk7ozi
working surface 3000 x 1700 mm
milling spindle Perske
turning speeds 23600 U/min
distance spindle /table 75 mm
Control Letra Studio
Euroline Typ 255-50 W
cylinder head volume 255 l/min
liter capacity 165 l/min
pressure max. 10 bar
container volume 50 l
operating speed max. 2850 Upm
total power requirement 1,85 kW
weight of the machine ca. 2,5 t
control programm devices
Bngxfoxw
milling drills 8-10 pcs
Bending tool, die, lower knife, lower tool, lower beam,
-Tool: for folding machine
-Widening: for lower cheek
-Dimensions: 33/76/3040 mm
-Bore distance: 280 mm
-Hole diameter: 18 mm
-Length: 3040 mm
Enr7mdft3
-Weight: 33 kg
* General * SKUR0450 * LocationBarneveld * MakeAZO GmbH & Co KG (D) * TypeD128/D350 * No.1097198 * Year of construction2012 * Floorspace1,0x0,8 M * Total height0,6 M * Weight100 Kg * Extra SpecificationsThis docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our m...
With Delem DA66T Control. Manufactured 2013.Serial No. B20173
Control Delem DA-66T
Back gauge Programmable
Guards Sick C4000
Capacity 300 ton x 3100mm
Maximum length of bend 3100mm
Between frames 2540mm
Daylight 530mm
Throat depth 410mm
Stroke length 260mm
Bed width 380mm
Input 415/3/50hz
Tooling Full length bottom multi vee.
Actuated via Wander type footswitch
Fitted with Side Guards. & 2 x work supports
X=Back gauge in/out X
Cklrqn2a
Y=Beam rise & fall Y1, Y2
R=Fingers rise & fall R
Features...
weight 5 t
height 4.300 mm
width 600 mm
Be7yxbnrh2
length 1000 mm
width 800 mm
height 630 mm
Bt8xan0abd
weight 460 kg
T-slot - width 50 mm
Clamping table, clamping plate, T-slot table
Dimensions
Table length: 1000 mm
Table width: 800 mm
Table height: 630 mm
T-slot length: 50 mm Weight: 460 kg
Press brake PROMECAM 5000mm
Brand : PROMECAM
Model RG 155 150 Tons x 5000 mm
Bending length 5000mm
Bending force 150 Tons
Control: Delem DA-41 2 axis X-Y
Machine with CE safety standards + apave (several emergency stop points, laser beam safety barrier, right-left side panel.
O9fin
Lot import Tooling Punch and die V included:
Approximate dimensions Length 5700mm Width 1800mm Height 3200mm Approximate weight : 12 000kg
Bending tool, die, upper knife, upper tool, upper beam
-Tool: comes from a Fasti type 211-32-2.5 folding machine
-Transfer in current condition as seen
B2ou8cdq
-partially damaged
-Pointed tool
-Dimensions: 75 x 15 mm
-Length: 3041 mm
-Weight: 23 kg
* General * SKUR0452 * LocationBarneveld * MakeAZO GmbH & Co KG (D) * TypeD128/D350xD500 * No.1244149-01 * Year of construction2015 * Material * MaterialStainless steel * Information * Floorspace1,0x0,8 M * Total height0,6 M * Weight100 Kg * Extra SpecificationsThis docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to ...
Serial No. 885008
Control " Trumpf"
Back gauge Programmable
Guards "Sick"
Capacity 130 ton x 3000mm
Between frames 2670 mm
Daylight 375 mm
Throat depth 410 mm
Bfi2jcz2zs
Stroke length 215 mm
Input 415/3/50 11klw approx
Tooling full length top and bottom tooling
Actuated via wander type foot switch
Fitted with Side,rear guarding and Crowning
X=Back gauge in/out X
Y=Beam rise & fall Y1 Y2
R=Fingers rise & fall R
Length 12'
Width 7' 2"
Height 8'
Nett weight actual. 11,600 Kgs. / 11.42 Tons.
length 6.000 mm
Be7xqjuv2z
weight 0,8 t
Press brake PROMECAM RG25
Btw8fiaj8d
Force 25 T.
Maximum length 1250 mm
Distance between uprights 1020 mm
Hydraulic control yes
Bending tool, die, upper knife, upper tool, deer foot tool
-Tool: for press brake
-Tool radius: mm
-Dimensions: 30 x 169 mm
-Length: 2500 mm
-Weight: 89 kg
Zeqz7xxr
* General * SKUR0448 * LocationBarneveld * MakeAZO GmbH & Co KG * TypeD128/D350 * No.1097198 * Year of construction2012 * Floorspace1,0x0,8 M * Total height0,6 M * Weight100 Kg * Extra SpecificationsThis docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machi...
Serial No. 883310
Noif7
Control "Trumpf"
Back gauge Programmable
Guards "Sick"
Capacity 85 ton x 2000 mm
Between frames 1750 mm
Daylight 380 mm
Throat depth 410 mm
Stroke length 215 mm
Input 415/3/50 7.5 KW
Tooling Full length top and bottom
Actuated via Wander type foot switch
Fitted with Side, rear guarding and crowning
X=Back gauge in/out X
Y=Beam rise & fall Y1 Y2
R=Fingers rise & fall R
Length 8' 4"
Width 7'
Height 8'
Nett weight actual. 7,760 Kgs. / 7.64 Tons.
