Used Brake Drum Lathe for sale (25,539)

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, actuation type: electric, controller manufacturer: Safan, controller model: TS1, bending force (max.): 80 t, working width: 2,550 mm, stroke length: 290 mm, throat depth: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, operating speed: 90 mm/s, table height: 950 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 6,800 kg, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, input voltage: 400 V, warranty duration: 3 months, pressing force: 80 t, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) Hedpfxout S E Ne Abusw CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: used, maximum load weight: 35,410 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2018, loading space length: 13,500 mm, loading space width: 2,490 mm, loading space height: 2,710 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2018, Additional information: * Curb weight: 6590 kg * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 30% * Tire tread depth inner right | First axle: 30% * Maximum axle load | First axle: 9000 kg * Tire size | Second axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 30% * Tire tread depth inner left | Third axle: 30% * Tire tread depth inner right | Second axle: 30% * Tire tread depth inner right | Third axle: 30% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Position | First axle: Rear * Brake type | First axle: Drum brakes * Suspension | First axle: Air suspension * Position | Second axle: Rear * Position | Third axle: Rear * Brake type | Second axle: Drum brakes * Brake type | Third axle: Drum brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional features: Hodpfx Absyw Eakjuew * Rear doors * Homepage Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We kindly ask you to inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors. The stated prices do not include BPM and are only valid for export.

Condition: used, LVD 3m x 135Ton, 4 Axis CNC controlled, with LVD Cadman CNC Control, Type PBEB 135/30, S/N 31078, Year 2007, - No Tooling LVD PBEB 135/30 CNC Press Brake with 135 Ton capacity and 3050mm bending length. Hydraulic CNC press brake ideal for fabrication and sheet metal applications. Available from stock Hjdpj Ad U Tujfx Abujw The LVD PBEB 135/30 CNC Press Brake is a robust and reliable hydraulic bending machine designed for precision sheet metal fabrication. Offering a 135-ton pressing capacity and 3050mm bending length, this machine is well suited to a wide range of manufacturing, engineering and subcontract fabrication environments. Manufactured by LVD, one of Europe's leading press brake manufacturers, the PBEB series is recognised for its durability, bending accuracy and ease of operation. The machine is capable of handling both one-off and production bending requirements, making it suitable for fabricators working across multiple sectors. Available from our Prestwick, Ayrshire facility, this machine presents an excellent opportunity to acquire a proven CNC press brake from a respected manufacturer. Inspection is welcomed and additional information can be provided upon request.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2008, total width: 2,480 mm, suspension: air, wheelbase: 9,230 mm, color: other, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Hsdpfxsz Avpdo Abujw Weights Empty weight: 5.650 kg Carrying capacity: 35.350 kg GVW: 41.000 kg Identification Registration number: OK-32-LD

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2010, loading space length: 13,580 mm, loading space width: 2,490 mm, loading space height: 2,980 mm, total length: 13,910 mm, total width: 2,550 mm, suspension: air, tire size: 435/50R 19.5, tire condition: 20 %, wheelbase: 8,750 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = General information Year of construction: 2010 Registration number: OK-96-ZZ Axle configuration Tyre size: 435/50R 19.5 Hsdsz Iydtspfx Abuew Make axles: BPW Tyre profile: 20% Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.840 kg Carrying capacity: 31.160 kg GVW: 39.000 kg

Condition: excellent (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & SBF326-3.2M Bar Feeder Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. Hjdpfx Abjz H U I Rsujw With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg.

Condition: excellent (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, feed length X-axis: 535 mm, feed rate Z-axis: 3,845 m/min, turning diameter over cross slide: 630 mm, turning diameter: 950 mm, turning diameter over top slide: 630 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, total height: 1,850 mm, total width: 2,105 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Hjdpjz S Nc Uofx Abuew Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Work area Swinging diameter: 520 mm Swinging diameter over cross slide: 400 mm Swinging diameter in the chuck: 1,000 mm Turning length: 1,250 mm Spindle Hjdpfxoz S Euas Abusw Spindle speed range: 11.2–1,120 rpm Performance data Total power consumption: 7 kW Machine weight: approx. 3.8 t Dimensions Space requirement: approx. 2.7 × 1.7 × 1.7 m EQUIPMENT 4-position tool holder with quick-change inserts Digital display

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm Hodsxdmgvjpfx Abuew CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: used, Year of construction: 2005, functionality: fully functional, KIATURN 15N SLANT BED CNC LATHE 170 MM HYD 3 JAW CHUCK MAX TURNING DIA 250 MM BAR CAPACITY 38.1 12 STATION TURRET TAILSTOCK FANUC CONTROL Hsdpfx Absz Rnwbeujw TOOL SETTER PARTS CATCHER BARFEED

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 520 mm, turning length: 3,000 mm, turning diameter: 800 mm, spindle bore: 170 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 15 rpm, spindle motor power: 26 W, rotational speed (min.): 15 rpm, rotational speed (max.): 1,000 rpm, Harrison Alpha CNC/Manual Lathe Model: 1800 XS Capacity: 800 x 3000mm Control: GE Fanuc Alpha x Series Year: 2008 Distance Between Centres: 3000mm Swing Over Bed: 800mm Swing Over Top Slide: 520mm Hodpfxjz S Nfvj Abusw Swing In Gap: 870 x 340mm Spindle Speeds: 15-1000 RPM (2 Ranges) Spindle Bore: 170mm Main Motor: 26 KW Machine With: 400mm 3 Jaw Chuck Fixed Roller Steady Photographs taken on site prior to cleaning and servicing

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, ## 2021 Star SB-20R Type G – 20 mm CNC Sliding Head Lathe 7 axis | Twin spindles | Driven tooling | Guide-bush / non-guide-bush operation | FMB magazine bar feeder Available from Swiss CNC, this 2021 Star SB-20R Type G CNC sliding head lathe combines 20 mm bar capacity, twin-spindle machining and a versatile tooling platform for precision component production. Equipped with FANUC CNC control, it offers turning, milling, drilling, tapping and back-working capability within a compact machine layout. The 10,000 rpm main spindle and 9,000 rpm sub-spindle both feature C-axis control, supporting accurately positioned machining operations on the front and rear of the component. The fully independent sub-spindle allows front- and back-working operations to overlap where the component and programme permit, helping reduce cycle times and minimise additional handling. ### Guide-bush and non-guide-bush flexibility A key feature of the SB-20R Type G is its ability to switch between guide-bush and non-guide-bush operation. Guide-bush mode supports the material close to the cutting point, making it particularly suited to slender components and longer turned features. For shorter components, non-guide-bush operation can reduce bar remnant length and improve material utilisation. This flexibility allows manufacturers to adapt the machine to different component geometries and production requirements. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SB-20R Type G | | Year of manufacture | 2021 | | Maximum machining diameter | 20 mm | | Controlled axes | Seven: X1, Y1, Z1, C1, X2, Z2 and C2 | | Maximum headstock stroke — guide-bush mode | 205 mm | | Headstock stroke — non-guide-bush mode | Up to 2.5 × bar diameter, maximum 50 mm | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 9,000 rpm | | Sub-spindle chucking capacity | 20 mm | | Spindle positioning | C-axis control on both spindles | | CNC control | FANUC CNC | | Rapid traverse | Up to 35 m/min | ### Tooling capability - Gang-type turning-tool arrangement, with six 12 mm or seven 10 mm square turning-tool positions, depending on the fitted tool block. - Four front-working sleeve positions for end-working operations. - Cross-drilling and milling capability, with modular cartridge tooling configurations available for different machining requirements. - Four-position back-working station, supporting static or driven tooling according to configuration. - Independent sub-spindle movement for component transfer and rear machining. ### Included equipment - FMB Turbo 2-20 automatic magazine bar feeder for 3.2 m bar stock. - Filtermist FX mist extraction system. - LNS MH500 Turbo swarf conveyor. - FireTrace fire suppression system. - Selection of tooling and workholding. The supplied bar feeder, extraction and swarf-handling equipment provide a practical package for manufacturers looking to add automated 20 mm bar-machining capacity. ### Machine hours and availability Power-on and cutting hours to be confirmed. 2021 machines available in the UK, offered individually. Price on application, plus VAT. Delivery, installation and training available. Contact Swiss CNC for pricing, machine videos, inspection arrangements and further information. Hodpfsz U Acmsx Abuow

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) Hjdpow Dcdyjfx Abusw PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: used, Binns & Berry Trident E1000 Double Gap Bed Centre Lathe With Digital Readout System. Distance Between Centres 4500mm Swing Over Bed 1000mm. Swing in Gap 1500mm. Width of Gap 350mm. Spindle Bore 100mm. Spindle Speeds 4 - 1250rpm. Leadscrew 2 TPI. Dual Dials. Power to Saddle & Cross Slide. Hodozy Il Eepfx Abujw Bison 625mm Diameter 4 Jaw Chuck. Fixed 3 Point Roller Bearing Steady. Weight Approx: 9000KG

Condition: excellent (used), Year of construction: 2023, stroke length: 3,100 mm, throat depth: 650 mm, overall weight: 16,200 kg, total length: 4,500 mm, total width: 2,200 mm, total height: 3,100 mm, power: 11 kW (14.96 HP), pressing force: 220 t, Press brake DURMA - AD-SERVO 30220 MACH-ID 9836 Make: DURMA Type: AD-SERVO 30220 Control: Delem DA69-T YOP: 2023 New 2023 very little working hours ! Hydraulic top and lower clamping CNC Crowning DAM Laser Measuring and Angle correction system Delem DA69-T 3D graphical controller Component Backagauge with R and Z Axis   Under power ! New EUR 120.000 Max. bending length: 3050mm Distance between column: 3100mm Max. pressing force: 220T Adjustment X-Axis back gauge:650mm Hjdpfsz Nwztox Abuow Number of controlled axis: 4 Power: 11kW Length: 4500mm Width: 2200mm Height: 3100mm Weight: 16200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1991, Used Darley press brake Type EHP 50 20 15 Capacity 2050 x 50 tons Delem control system Hjdpfez N Exgsx Abuow Y1, Y2, and X-axis CNC Includes a set of tooling

Condition: ready for operation (used), Year of construction: 2008, operating hours: 411 h, functionality: fully functional, chuck outer diameter: 1,200 mm, spindle speed (max.): 300 rpm, spindle speed (min.): 2 rpm, turning diameter: 1,600 mm, Massa Heavy Duty Precision CNC Vertical Borer Model: VL-1200 ATC + C Control: Fanuc 18i TB Year: 2008 Max Swing Dia:1600mm Max Turning Dia: 1350mm Max Turning Height: 1250mm 4 Jaw Scroll Chuck Dia: 1200mm Table Speeds: 2-300 RPM Hodpfxezv T A Ie Abuew 16 Station Tool Changer ‘C’ Axis 360 Degrees ‘C’ Axis Milling Spindle BT 50 Dimensions: 6300 x 4500 x 5800mm Weight: 33,000 KGS

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning length: 600 mm, turning diameter: 400 mm, spindle speed (min.): 3,800 rpm, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Okuma LU300MY, with E-100L control, A-turret V12 all driven VDI4-40 M-function for milling, B-turret V-8, tailstock, chip conveyor, coolant system 8 bar, MY function Y-axis, touch setter, approx. 15,500 spindle hours, built in 2004, good condition and fully functional, available immediately. Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Hjdpfxsvta Nye Abuew We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: used, Year of construction: 2008, operating hours: 18,349 h, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, Produced in 2008, cutting time 18,349 h, OSP P200L, 4-axis double turret VDI40, A-turret VDI40 V12 with live tools, B-turret VDI40 V8, turning diameter 340 mm, turning length 1000 mm, standard spindle bore, main spindle 4800 rpm, tailstock, manual, touchsetter, chip conveyor, coolant station, in good working and geometric condition, optional tools available. Hsdpfx Abeyu N Uxeujw

Condition: new, Pressing force: 40 t Bending length: 1270 mm Distance between uprights: 980 mm Hodsgiud Hopfx Abuow Overhang: 200 mm Installation height: 320 mm Stroke: 100 mm Working speed: 10 mm/s Drive power: 4 kW Dimensions L x W x H: approx. 1950 x 1450 x 2100 mm Weight: approx. 3200 kg Accessories / Special features: • Manual control for the motorized ram depth and backstop o Ball screw spindles o Fine adjustment via handwheel • Upper tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly curved, R = 0.8 mm, pressure load 100 t/m, tip 88° • Universal die 50 x 50 mm with multiple V-openings • Backstop with ball screw spindles, length = 600 mm • Only one working speed of 10 mm/s for all vertical movements, therefore no light barrier is required! • Front support arms • Control pendant • Painting: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 • Operating manual • CE conformity Delivery time: approx. 2-3 months after order receipt plus pre-carriage costs China - Germany Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 1999, Lathe STANKO IMPORT 1M63H-1.5, year of manufacture 1999 with 2-axis digital display Heidenhain, faceplate 610 mm, Multifix holder size C with 2 tool pockets, with upper slide feed. Turning diameter: 630 mm Turning length: 1500 mm Spindle bore: 105 mm Spindle speeds: 10 to 1250 rpm Spindle nose: DIN 11 Weight, approx. 5,000 kg. Coolant system, machine lamp. Machine documentation available. Hsdpoz St Uusfx Abuow Good condition, ready for use. Further data can be found in the data sheets.

Condition: used, total length: 3,400 mm, total width: 1,800 mm, total height: 2,600 mm, Year of manufacture: 1994 Colour: Grey Weight: 10.400 kg Price: On request - Year: 1994 - Serial number: 1776 - Drive system: Conventional - Power [kW]: 22.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 220 - Max. working width [mm]: 3050 - Column gap [mm]: 2620 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 240 Hedpfoybdtcsx Abujw - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Transport dimensions: 3400mm x 1800mm x 2600mm (l x w x h) - Transport weight [kg]: 10400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, color: other, We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Hodpfx Abolp Hl Rouew

Condition: used, total length: 5,100 mm, total width: 1,800 mm, total height: 1,950 mm, Year of manufacture: 2013 Colour: White Empty weight: 7.500 kg Price: On request - Year: 2013 - Documentation available: Yes - CE marking present: Yes - Serial number: 40032 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 445 - Swing over bed [mm]: 890 - Carriage turning diameter [mm]: 490 - Distance between centres [mm]: 3000 - Bed width [mm]: 700 - Spindle bore [mm]: 155 - Min. spindle speed [rpm]: 3.7 - Max. spindle speed [rpm]: 1000 - Max. workpiece weight [kg]: 5000 - Options: Three-jaw chuck, Removable bed, Fixed steady, Quick-change tool post, Digital readout - Swing over removable bed [mm]: 1060 - Type of digital readout: Fagor - Transport dimensions: 5100mm x 1800mm x 1950mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hsdpfxjznmlgo Abujw VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2016, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, wheelbase: 8,910 mm, color: white, General information Year of construction: 2016 Registration number: OP-44-FR Axle configuration Make axles: Schmitz Cargobull Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 9.166 kg Carrying capacity: 32.834 kg GVW: 42.000 kg Functional Make of bodywork: Carrier Vector 1950 MT Cooling engine: diesel and electric (16341 operating hours diesel; 3457 electric) Wall thickness: 5 mm Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Cooling/freezing system - Disc brakes - EBS = Remarks = Hsdpfxoz Tztzs Abuew Schmitz Cargobull SCB*S3B / Frigo / Vector 1950 MT / Multitemp / Disc Brakes