Used Brian Beckum Inert Gas Welding Machine for sale (68,491)

Condition: good (used), nominal power at 50% duty cycle: 8 kVA, – Capacity: 8 kVA Njdsvbr Dlopfx Abuslh – Timer – 380 V

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* Nsdpfx Abexrb Tgoujlh - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, URBAN AKS 6410/4 four-head welding machine, from right to left, maximum welding dimensions: 2,700 × 2,500 mm, Windows control system, weld bead limit of 0.2 mm for coloured profiles, previously operated on a single shift, technically refurbished and fully functional. Nodsznwq Topfx Abujlh

Condition: ready for operation (used), Rehm Tiger 210 DC Welding Machine Manufacturer: REHM Model: TIGER 210 DC Welding processes: WIG DC / MMA Welding current WIG: 3–210 A Welding current MMA: 3–170 A WIG 100% duty cycle: 175 A (20 °C) WIG 100% duty cycle: 140 A (40 °C) MMA 100% duty cycle: 160 A (20 °C) MMA 100% duty cycle: 120 A (40 °C) Mains voltage: 230 V / 50 Hz You are welcome to visit us for a viewing. We can also arrange affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Nledpfxszy Eqle Abush Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: MB 0484 / 2014, type of input current: three-phase, continuous power (apparent): 10 kVA, type of cooling: air, total width: 1,119 mm, total length: 2,595 mm, total height: 2,510 mm, overall weight: 1,700 kg, For sale is a capacitor discharge welding system (CD welding system) from the brand GLAMATRONIC, model GKS-S4/12-Q, manufactured in 2015. The system is in good condition and is suitable for industrial welding applications with high process reliability and precise energy output. The system has been regularly maintained and is immediately ready for operation. The control cabinets are equipped with additional air cooling. Nodpfxjy Rmk De Abuslh Technical data: Make / Type: GKS-S4/12-Q Year of manufacture: 06/2015 Rated voltage: 3 x 400 V AC / 50 Hz Control voltages: 230 V AC / 24 V DC Rated power: 10 kVA Welding energy: 4 kJ Welding force: 12 kN Max. supply line fuse: 32 A Frame weight: approx. 1,700 kg Control cabinet weight: approx. 1,000 kg

Condition: good (used), Year of construction: 2015, 1 used shielding gas welding machine Daihen /OTC M 380-S Year of manufacture 2015 Current range 30-380A Welding power at 100% duty cycle 270A Welding wire 0.8-1.6 mm Wire feed 0.1-22 m/min With 4-roller wire feeder with encoder control Nledpfx Asxnqnxjbuoh

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Water-cooled, pneumatic spot welding tong Nimak L193 TB. Very good used condition, fully functional. Item located in 75053 Gondelsheim. See photos. Shipping by forwarding agent or collection. Nodpfx Aexmuypebuslh

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system Nlodsy Ulrnjpfx Abush -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: LUD320W -Max. welding current: 320 A -Features: Water-cooled, remote control -Wire feeder case: Esab MEK 44 C 4-roller drive -Dimensions: 1130/640/H1630 mm -Weight: 174 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 1,500 mm, total width: 900 mm, total length: 1,400 mm, overall weight: 850 kg, IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 Nedpfx Ajz D Hyyebuslh IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 1400*900*1500 mm over width, depth and height. Instructions and packing come with the machine. With special Bandsaw pneumatic band insertion device for 10-25 mm width. Voltage 400-440 V Power 25 kVA Frequency 50-60 Hz Serial no. 239635 Year of manufacture 2012 Bandsaw blades welding widths From 6 to 50 mm possible, current setup is for blades from 10 to 25 mm wide.

Year of construction: 2010, condition: used, Double-head PROFTEQ SA 22 welding machine, manufactured in 2010, designed for welding PVC profiles used in the production of windows, doors, frames and sashes. The machine is equipped with two welding heads, one fixed and one movable, allowing both right-angle and variable-angle welding operations. Nodpfxo Abbbao Abuolh The fixed head performs welding at 90°, while the movable head allows variable-angle welding from 45° to 180°, providing greater versatility in window and door manufacturing. The welding cycle is automatic and includes the heating, melting, joining and cooling phases of the profiles. Technical Specifications Manufacturer: PROFTEQ Model: SA 22 Year of manufacture: 2010 Machine type: Double-head welding machine for PVC profiles Number of welding heads: 2 Fixed head: 90° welding Movable head: Variable-angle welding from 45° to 180° Welding cycle: Automatic Minimum weldable profile height: 35 mm Maximum weldable profile height: 190 mm Maximum weldable profile width: 150 mm Power supply: 380 V Frequency: 50 Hz Installed power: 4 kW Pneumatic pressure: 8 bar Weight: 1,000 kg Overall Dimensions Length: 3,800 mm Depth: 1,100 mm Height: 1,900 mm Features and Equipment Two welding heads for processing PVC profiles. Movable welding head for variable-angle welding operations. Pneumatic profile clamping system. Heating plates for melting the surfaces to be welded. Welding bead limitation system. Dedicated control panels for each welding head. Adjustable welding parameters, including temperature and processing times. Automatic welding cycle.

Condition: new, Year of construction: 2026, operating hours: 2 h, functionality: fully functional, type of cooling: water, Equipment: documentation/manual, Fiber laser welding machine with 2000-watt laser power 4-in-1 device Welding with automatic wire feed Welding without wire Cleaning Nedpfxjug Unfs Abujlh Cutting - Top device at a top price from our showroom - approx. 10 operating hours - 2kW laser source by MaxPhotonik - German-language menu navigation - Universal device for welding / cutting / cleaning - incl. 4-roller welding wire feeder - integrated water cooling - immediately available Also take advantage of our attractive leasing/financing offers. Approx. machine dimensions: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg

Condition: excellent (used), 3-phase DC spot welding machine, A/DH version Brand DALEX Type PMS 14-5 G3 Thrust: 550 mm Rated power at 50 & duty cycle: 150 kVA Secondary short-circuit current: 65 kA Secondary open-circuit voltage: 3.35 - 6.7 V Electrode force: 80-1,200 daN Weight: 1,620 kg with double-stroke cylinder 4-position switch Main switch Mounted control cabinet according to VDE 0110 with 100-program MPS 8043/1 welding controller Nlodpfsv Uwyrox Abueh

Condition: good (used), Year of construction: 1976, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Stationary Nlsdpfx Asc N Uabobuoh -Operation via hand switch -Arm length of welding machine: 350 mm -Welding pliers type: -Steering -Machine dimensions: 1500/1000/H1670 mm -Machine weight: 774 kg -Dimensions of control cabinet: 1550/420/H1960 mm -Weight of control cabinet: 330 kg

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA throat:280 mm capacity at 50%:100 kVA pressure:1,1 t stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R Nlsde Ad Shvspfx Abueh total power requirement:279 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SWM001, type of input current: DC, nominal power at 50% duty cycle: 37 kVA, input voltage: 380 V, type of cooling: water, overall weight: 230 kg, warranty duration: 24 months, welding power (max.): 75 kVA, total width: 500 mm, total height: 1,620 mm, total length: 950 mm, Spot welder / welding machine with water cooling – 75KVA – adjustable power, resistance, etc., + spare tips Nledpfoyl Sy Ejx Abush

Year of construction: 1999, condition: excellent (used), Spot welding machine NIMAK PMP 5/35 + water cooling unit Year of construction approx. 1980 Nledjium Nijpfx Abueh Power at 50% ED 35 kVA Projection 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely adjustable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insertion electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connected load 83 KVA Mains connection 380 volts, 50 Hz - 4-time control - stepless power adjustment - Single points and series points - parallel electrode guidance - Water-cooled (without cooling unit) - electric foot switch Weight 300kg

Condition: used, Year of construction: 2015, Offer 26163 Technical data (approximate): - Maximum workpiece diameter: 80 mm - Overhang: 70 mm - Welding torch stand adjustable in X, Y, and Z - Stand travel via handwheel: 500 mm - Stand overhang: 70 mm - Distance between centers: 600 mm - Tailstock with pneumatic pressure spindle - 3-jaw chuck: 100 mm - Hand-held remote control - Connection cable - Pneumatic connection - Table frame: W 2000 x H 850 x D 700 mm - Footprint (approximate): W 1150 x H 650 x D 500 mm Nedpfx Aszg A Riobuelh - Weight (approximate): 200 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Water-cooled, pneumatically operated spot welding tongs Nimak L123 Nledpfjxmuyvex Abueh Very good used condition, fully functional. Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only Nlsdjdzqb Eepfx Abuoh - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: used, Wig welding machine, WIG welding system NIMAK Type GS 200 W WIG and DC electrode welding machine, also suitable for stick electrodes Manufacturer's No. 26642, year of manufacture approx. 1983 Output: 200 amps = 60% duty cycle 150 amps = 100% duty cycle Nedpfxedzqbve Abujlh Adjustable output range: continuously variable Mains connection: 380 volts, 50 Hz, 32 amps plug - 5 meter WIG hose assembly - HF ignition - Continuous current control and current increase - Connection for electrode welding - DC only - Water-cooled - Shielding gas pressure regulator Space requirement L x W x H: 900 x 590 x 1000 mm Weight: approx. 200 kg In good condition

Condition: used, Year of construction: 2015, Handles the full spectrum of blade types — bi-metal, carbide, wood, and stainless steel — up to 50 mm clamping width, covering blade dimensions from 6×0.40 mm up to 54×1.60 mm on bi-metal stock. At 25 kVA with 38 kN clamping force and 10 kN upsetting force, it delivers consistent, high-integrity welds across carbon and stainless steel strip with max. cross-sections of 150 mm² and 60 mm² respectively. The fully automatic welding and annealing cycle is recipe-controlled via touch panel — operator inserts the blade, hits start, and the machine handles the rest. Robust pneumatic clamping, water-cooled electrodes, and a 800 kg industrial frame make this a workhorse for sawmills, blade service centers, and large metalworking operations. Nlodoz Rkcaopfx Abush Make and Model iDEAL BAS 320 Nominal output (50% DC) 25 kVA Secondary voltage 2.8 – 5.5 V (6 stages) Control voltage 24 DC Clamping force 38 kN Upsetting force (max.) 10 kN Air pressure (min.) 6 bar Air consumption per cycle 52.6 Nl (at 6 bar) Cooling water consumption 4–5 l/min (20–25°C) Machine weight approx. 800 kg Dimensions W/D/H 1214 / 957 / 1982 mm Connection voltage 380–420 Bi-metallic / carbide bandsaws 6×0.40 – 54×1.60 Wood saw blades 6×0.40 – 50×1.10 Stainless steel saw blades 10×0.40 – 40×0.80 Strip blades 6×0.40 – 50×1.00 Steel strip S235JR max. 150 mm² Stainless steel max. 60 mm² Max. clamping width 50 mm

Condition: excellent (used), Spot welding machine with DHZ cylinder Brand DALEX Type PMS 12-5 Rated power at 50% duty cycle: 100 kVA Secondary short-circuit current: 46 kA Secondary open-circuit voltage: 8.33 V Electrode force: 120-720 daN Weight: 715 kg Nedpfx Aewarqnebujlh With separate central control cabinet for connecting five PMS 12-5 spot welding machines with PLC, five power levels and one MPS 200 synchronous welding controller with eight welding programs

Condition: excellent (used), Year of construction: 2019, 1 used CNC stud welding machine Manufacturer: HBS HBS Type: CPW0604/1K/1MZ Year of manufacture: 2019 Working area: 600 x 420 x 120 mm / 23.6" x 16.5" x 4.7" T-slot work table: 800 x 490 mm / 31.5" x 19.3" Welding range: M3 - M8, Ø 3 - 8 mm (Ø 10/12/12.7 mm only possible with modification) Nlodpfozq R Uwjx Abujh #4 - 5/16", Ø #4 - 5/16" (Ø 3/8" - 1/2" only possible with modification) Stud length: 8 - 40 mm / 0.31" - 1.57" (other lengths available upon request) Welding performance: Up to 30 studs/min. (depending on configuration) Feed rate: 25 m/min. (X-Y), 20 m/min. (Z) / 82'/min. X-Y, 65.6'/min. Z Stud feed: Automatic stud feed (up to 3 different stud lengths per welding head) Positioning accuracy of the welded stud: ± 0.2 mm / ± 0.008" Positioning and repeatability accuracy: ± 0.05 mm / ± 0.002" Welding head: KAH 412 KAH 412 LA (mechanical length compensation - gap) Max. number of stud welding heads: 1 Connection values: Electrical: 400 V*, 16 A, 50 Hz; Pneumatic: min. 6 bar / max. 10 bar / internal hose diameter 6 mm Motorized Z-axis: Z = 0 - 120 mm / 0 - 4.7" (freely programmable via servo drive) Control: High-performance PLC according to IEC 61131-3 Display: 9-inch touchscreen Keyboard: Touch Dimensions (L x W x H): 1600 x 950 x 1900 mm / 63" x 37.4" x 74.8" Weight: Approx. 640 kg / 1410.96 lbs

Condition: excellent (used), Parallel-operated, water-cooled spot welding machine Manufacturer: DALEX, Model: PL 63-1 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31.5 kA Secondary open-circuit voltage: 7.04 V Electrode force: 390 daN Reach: 250-550 mm Arm distance: 150 or 310 mm Nljdpjzrupzefx Abuoh with mounting control cabinet according to VDE 0113 Main switch Synchronous welding control 15036

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Nlsdpoy N Dukofx Abush Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition