Used Bridge Port Harding for sale (7,277)

Year of construction: 2003, condition: good (used), Traverses X Y Z: 810 x 610 x 500mm, Table 350mm diameter, C axis (rotary) 360o, A axis (Tilt) +30o/-120o, Spindle speed 12000 rpm, Nlsdpfx Agsk Shihoyjc Spindle taper BT40, Spindle Motor 13kW, Rapid feedrates 43m/minute, Heidenhain TNC530, 30 Station side arm ATC, Coolant, Low Volt light

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 950693, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 20 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 900 kg, total height: 2,682 mm, total length: 2,340 mm, total width: 2,830 mm, table width: 580 mm, table length: 1,150 mm, table load: 900 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,400 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,150 h, spindle motor power: 13,000 W, spindle nose: BT-40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Bridgeport VMC 1000XP with 73 tool holders Year of manufacture: 04/2003 Serial number: 950693 3 axes Travel: X: 1020 mm, Y: 610 mm, Z: 600 mm Rapid traverse rate X and Y 43 m/min, Z 30 m/min Positioning accuracy ±0.005 mm Repeatability ±0.002 mm Y-axis with 4 guide rails Table: 1150 x 580 mm Table load: 900 kg Spindle motor power 13 kW Speed 12000 rpm Spindle taper BT 40 Dual-arm tool changer: 30 tools Tool change time 5.2 sec Blum measuring probe TC52 Oil mist extraction system Coolant system Automatic central lubrication Vacuum sensor for operating a vacuum clamping plate Control: Heidenhain iTNC 530 Connection: 400 V, 3-phase, 50 Hz; Full load current 30 A, Total current 20 kVA Pneumatics: Compressed air 5.5 bar Dimensions: 2830 x 2340 x 2682 mm Weight: 4400 kg Spindle operating time: 9150 h The machine was mainly used for machining aluminum and plastic, therefore the guide rails and the spindle are in very good condition. The machine can also be sold without the tool holders; in this case, the purchase price will be reduced by €1500.00 (new price approx. €4800.00). 73 tool holders 10 pcs. Weldon collet chuck, Ø 6 1 pcs. Weldon collet chuck, Ø 8 6 pcs. Weldon collet chuck, Ø10 4 pcs. Weldon collet chuck, Ø12 4 pcs. Weldon collet chuck, Ø16 3 pcs. Weldon collet chuck, Ø20 4 pcs. Long Weldon collet chuck, length 160, Ø8/10/12/16 Nodpfxjzbqx So Agyolc 18 pcs. OZ collet chuck DIN 6388, Ø 2-16 3 pcs. Threaded length compensation collet chuck 1 pcs. Intermediate sleeve for ISO 30 2 pcs. Milling cutter holder for screw-in milling cutters 2 pcs. Knife tool holder Ø 16 x 100 1 pcs. Knife tool holder Ø 22 x 160 1 pcs. Knife tool holder Ø 27 x 40 1 pcs. Knife tool holder Ø 40 x 160 2 pcs. Drill chuck holder B12 3 pcs. Albrecht drill chuck Ø 0-5 mm mounted on a taper 1 pcs. Short drill chuck Ø 0-8 mm 4 pcs. Short drill chuck Ø 1-13 mm 2 pcs. Precision collet chuck WNT Centro-P with collets Ø 6/8/10/12

Condition: good (used), Year of construction: 1998, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, table width: 420 mm, table length: 840 mm, spindle speed (max.): 6,000 rpm, Table size 840 x 420 mm Nledpfxoy R Um Tj Agyoc Travel X/Y/Z: 600 / 410 / 520 mm Spindle SK 40, speed up to 6000 rpm Main drive 8.5 kW Tool changer with 22 stations Control: Heidenhain TNC 370 Including coolant system

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 20910, table mounting size: 1000 x 490 mm movements x/y/z: 800/510/500 mm spindle taper: ISO 40 ISA min./max. distance table/spindle: 120/620 mm spindle turning speed range: 40 - 6000 rpm number of tool positions: 22 pieces Nledpsdt Ttkjfx Agyoc carriages: x/y 1 - 3200 / z 1 - 2000 mm/min rapid move: x/y 1 - 3,2, z 1 - 2 m/min electrical connection: 380 V, 19 kW space needed: 2850 x 2150 x 2600 mm weight: 3800 kg

Year of construction: 2001, condition: ready for operation (used), Three older milling machines are available. 1) CNC vertical center Bridgeport VMC 1000/22, year of manufacture: 1999, travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. 2) CNC engraving and milling machine Paso P700C, year of manufacture: 2001, machine dimensions X/Y/Z: approx. 1650mm/1550mm/2450mm, weight: approx. 1700kg. 3) CNC engraving and milling machine Kuhlmann Prokomat 25S, year of manufacture: 1991, travel X/Y/Z: approx. 700mm/600mm/300mm, table dimensions X/Y: 720mm/700mm, portal clearance X/Y: 800mm/400mm, feed: 6m/min, machine dimensions X/Y/Z: approx. 1600mm/1600mm/2400mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Individual sale possible. Nodjy E S D Sjpfx Agyjlc

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 540 mm, table length: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm. Machine Benefits Technical Machine Benefits Nedpfx Agoyi Eg Heyslc • Spindle nose to table top: 145-685 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426 P, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,020 mm Travel Y-axis: 510 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 25 m/min Workpiece weight (max.): 900 kg Spindle speed (max.): 10,000 rpm Spindle taper: ISO 40 Spindle power: 19 kW Clamping surface: 1,150 x 490 mm T-slots: 5 at 100 mm pitch Number of tool magazine positions: 30 Njdpfjy R Am Uox Agyjlc Tool change time: 3.5 sec Max. tool weight: 6 kg Max. tool length: 250 mm Max. tool diameter: 80 mm MACHINE DETAILS Control: HEIDENHAIN TNC 426 P EQUIPMENT Chip conveyor Operating manual CE Declaration of Conformity

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: Heidenhain, overall weight: 7,000 kg, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Bridgeport VMC 760XP Year of manufacture 2006 Heidenhain iTNC 530 Spindle speed up to 12.000 rpm Drive power 25 KW Tool changer 30-fold BT40 IKZ 20bar M&H infrared 3D probe Nljdpfxsuk Nt Ej Agyec Chip conveyor Total operating hours 30256 hrs. New Heidenhain SSD hard disk New Heidenhain power unit Machine is 2nd hand Machine can be inspected and demonstrated at our premises.

Condition: used, Year of construction: 2002, x-travel 600 mm y-travel 410 mm z-travel 520 mm Spindle Speed 8000 U/min. table length 840 mm table width 420 mm Nlsdpfx Aeyv Ngxjgysc engine output 15 kW tool change unit 16 control SIEMENS 810 shopmill rapid traverse X- and Y-axis 36 m/min rapid traverse Z-axis 20 m/min taper ISO SK 40 dimensions 2200x2300x2300 mm weight 2500 kg Youtube-Video-Links: ?v=lGP4FX8j_Gg ?v=WSiuzCJw6G4

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 410 mm z-travel 520 mm control Siemens type 840 D Tool changer 30 Pos. spindle taper: ISO 40 spindle turning speed range 40-6000 U/min table surface area 840x420 mm Table load 500 kg spindle power 8,5 kW total power requirement 15 KVA weight of the machine ca. 2,7 t Machine has 4 axes The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Nlodpfx Ageyqvt Tjyec About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1989, functionality: fully functional, Controller Heidenhain TNC355 Table size 925 x 380 mm Max. table load 420 kgs X-axis 760 mm Y-axis 410 mm Z-axis 450 mm Spindle taper ISO40 Spindle power 5.5 kW Tool magazine 20-position Max. spindle speed 6000 rpm Njdpfxjy Hu Szs Agyolc Power requirement 18 kVA / 380 V / 32 A Weight 3300 kg Dimensions (L x W x H) 3200 x 2600 x 2500 mm Accessories, equipment - Coolant system - Machine mounths

Condition: ready for operation (used), Year of construction: 1992, A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible. Nodpeyw Sv Ssfx Agyelc

Condition: excellent (used), Year of construction: 2000, operating hours: 1,100 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, table load: 500 kg, overall weight: 2,700 kg, spindle speed (max.): 12,000 rpm, FOR SALE: VMC 600/22 Vertical Machining Center – Upgraded High-Speed Unit Nlodpfx Agey Rvdtoyec A high-performance, extensively upgraded vertical machining center is available for sale. This machine has undergone significant technical modernization, greatly increasing its speed and reliability compared to standard models. Key Upgrades: - Control System Retrofit (2018): Completely modernized CNC for improved reliability and efficient programming. - High-Speed Spindle: Upgraded to a 12,000 rpm spindle (replacing the standard 6,000 rpm unit). The new spindle has only approximately 300 operating hours. Technical Data: - Travel paths: X: 600 mm, Y: 410 mm, Z: 520 mm - Worktable: 840 x 420 mm (max. load: 500 kg) - Tool changer: 22-position tool magazine - Rapid traverse rates: X/Y 40 m/min, Z 20 m/min - Spindle taper: BT 40 - Machine weight: approx. 2,700 kg This VMC is a production-ready powerhouse. Thanks to the high-speed spindle upgrade, it is perfectly suited for modern high-speed machining and efficient material removal.

Condition: like new (used), Year of construction: 2012, Bridgeport VMC 600 ECO Machining Center Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE compliant!! Technical Data: Year of manufacture: 2012 Condition: Good Control system: HEIDENHAIN ITNC 530 Travel in the X/Y/Z axes: 600/410/520 mm Rapid traverse in X/Y/Z axes: 40/40/20 m/min Table dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8,000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the machine: Nledpfjxtxk Ssx Agyjc Offered here is a Bridgeport VMC 600 EC machining center equipped with a Heidenhain ITNC 530 control system. This machining center is in excellent original condition. It comes from a facility where it was used sparingly for training purposes only. The control system is very user-friendly. The guides are lubricated regularly via the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Bridgeport VMC 600 EC under power on site. You can find further milling machines from well-known manufacturers on our website.

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Nledpjv Uqb Nofx Agyec

Year of construction: 2004, condition: ready for operation (used), Axes: XYZ (3-axis), travel X/Y/Z: 950mm/500mm/450mm, speed: 8000rpm, rapid traverse: 40m/min, spindle nose: SK40, table size X/Y: 580mm/1150mm, max. table load: 900kg, tool holder: BT40, tool capacity: 24, control: Heidenhain iTNC 530. dimensions X/Y/Z: approx. 2400mm/4400mm/2700mm, weight: approx. 5000kg. Nledpfxjtufb Is Agyoc

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 080026B, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 272 kg, spindle speed (max.): 30,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel Paths X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Feed and Spindle Feed rates: 15 m/min Spindle speed: 30,000 rpm Spindle power: 9 kW Spindle taper: HSK 40 Work Table Table size: 600 × 500 mm T-slots: 4 at 110 mm Max. table load: 272 kg Tool Changer Tool changer: 16 positions Max. tool weight: 1 kg Max. tool length: 90 mm Max. tool diameter: 16 mm Control Control unit: Heidenhain iTNC 530 MACHINE DETAILS Electrical Data Voltage: 400 V Phases: 3 Ø Frequency: 50/60 Hz Full load current: 50 A Nlsdpowzx A Hsfx Agyjc Dimensions & Weight Dimensions: 220 × 215 × 280 cm Net weight: 3,200 kg

Condition: like new (used), Year of construction: 2008, operating hours: 24,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, controller manufacturer: FANUC, controller model: Series 18i-MB, workpiece weight (max.): 700 kg, table width: 540 mm, table length: 940 mm, spindle speed (min.): 8,000 rpm, mount diameter: 30 mm, tool diameter: 76 mm, tool weight: 8 g, CNC controller: FANUC Series 18i-MB Axes X-axis travel mm: 800 Y-axis travel mm: 540 Z-axis travel mm: 540 Distance spindle nose - table surface mm: 45 - 685 Worktable Table dimensions mm: 925 x 540 Max. workpiece weight kg: 700 T-Slot version: 18 Spindle Spindle speed rpm: 8.000 Tool system Nedpfx Aow Aaycsgyjlc Tool magazine slots: 30 Max. Tool Diameter: 76 Max tool weight kg: 8 Equipment Chip conveyor Machine running times Under power: 24.000 Basic machine dimensions / weight Length mm: 2.955 Width mm: 2.137 Height mm: 2.713 Weight kg: 6.500

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table width: 900 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travels x-axis travel: 600 mm y-axis travel: 500 mm z-axis travel: 600 mm Spindle Spindle speed – infinitely variable: 0–12,000 rpm Spindle motor: 10 kW Tool holder: SK40 DIN 69871 Table Clamping surface: 900 × 500 mm Control Control system: iTNC 530 Heidenhain Tool Magazine Number of tool positions in magazine: 24 MACHINE DETAILS Electrical Data Total power requirement: 22 kW Nlodpfxjwynrzs Agyec Weight and Dimensions Machine weight: approx. 6,4 t Space requirements: approx. 5.3 × 3.5 × 3.5 m EQUIPMENT Scraper-belt chip conveyor Coolant system with 3 pumps and cartridge filter High-pressure pump Grundfoss type CRK2-220/22 A-W-A-AUUV

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, table length: 1,200 mm, table width: 600 mm, spindle speed (max.): 12,000 rpm, table height: 560 mm, table load: 900 kg, Machine with just revised spindle, never used after Connected to power and available for inspections and tests Lubrication through spindle 30 Tools Nsdpfx Agerb Amleyslc Heidenhain 530

Year of construction: 2018, condition: used, functionality: unexamined, Sasso K500 CNC bridge saw (2018) 3 axis Nodpozc Rgrjfx Agyelc Also available from the same location - Bellani Modulo edge polisher (2010)

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Nlsdpfx Aoy Avl Iogysc Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm

Condition: defective spare-parts repository (used), Vickers Type: HVS 1000 The digital micro-Vickers hardness tester HVS 1000 features a Nljdpfszgbr Sjx Agyoc unique and precise design in the areas of mechanics, optics, and light source, and is capable of producing a clearer image of the impression, thus enabling more accurate measurements. Main purpose and scope of application: 1. Iron and steel, non-ferrous metals, metal foils, hard alloys, sheet metal, microstructures 2. Carburized, nitrided, and decarburized layers, surface hardening layers, plating, coatings 3. Glass, wafers, ceramic materials Specifications: Model HVS1000 Type Digital Micro Hardness Tester Test forces (N) 0.098 / 0.246 / 0.49 / 0.98 / 1.96 / 2.94 / 4.90 / 9.80 Test forces (Kgf) 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 Load control Automatic loading and unloading Objective-indenter turret Manual Dwell time (s) 0~60 Microscope magnification x 400x for measurement, objective 40x, eyepiece 10x 100x for observation, objective 10x, eyepiece 10x Micrometer resolution (μm) 0.01 Test range 5 HV~3000 HV Dimensions of XY test table 100X100 mm Travel range of XY test table 25X25 mm Max. sample height 120mm Max. sample width 110mm Hardness conversion HK, HRA, HRB, HRC, HRD, HR15N, HR30N, HR45N, R15T, HR30T, HR45T, HV, HBW Output Built-in printer, RS232 interface Power 220V, 60/50Hz Dimensions (mm) 441 x 270 x 480 Net weight / kg) 35 Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and information!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 Nedpsx Dkk Sofx Agyslc - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Impact hardness tester Design according to Professor Baumann Type: No. 523 Nlodpfx Agsd R Rhweyjc Operating manual available Dimensions of the case: L. 380 x W. 220 x H. 95 mm Weight: 5.5 kg