Used Page Gate for sale (1,204)

Condition: excellent (used), Year of construction: 2021, Ref:11155 . 2021 Horizon Stitchliner Mark III Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 30 station (1 x VAC 1000Ha + 2 x VAC 1000Hm) 10 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer PK-30 Kicker Shingle delivery belt. Specification: Max sheet size: (Portrait: 356 × 508mm) Bjdpfsz Hz Evex Al Aodh (Landscape: 267 × 610mm) Min sheet size: 140 × 194mm Finished booklet size (approx): Max: 352 × 303mm Min: 120 × 85mm Typical formats: A3, A4, A5, B4, B5 Paper weight: Uncoated: 52–350 gsm / Coated: 73–350gsm Max stitch thickness: 5mm Equivalent to ~10mm booklet thickness (~50 sheets of 80gsm) Loop stitching: Max ~3mm stitch thickness Wire size: Typically 0.4 – 0.6mm (No.24–27 range) Trim width: 2 – 25.4mm Max trim thickness: 10mm Max speed: Up to 6,000 booklets/hour A4 landscape: 5,300/hour

Condition: excellent (used), Year of construction: 2020, Ref:11141. 2020 Horizon Stitchliner Mark III L Stitchliner with A4 Landscape capability. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 24 station (1 x VAC L600Ha + 3 x VAC L600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer Specification: Max sheet size: (Portrait: 356 × 508mm) (Landscape: 267 × 610mm) Min sheet size: 140 × 194mm Finished booklet size (approx): Max: 352 × 303mm Min: 120 × 85mm Bjdjzyu Ugjpfx Al Aodh Typical formats: A3, A4, A5, B4, B5 Paper weight: Uncoated: 52–350 gsm / Coated: 73–350gsm Max stitch thickness: 5mm Equivalent to ~10mm booklet thickness (~50 sheets of 80gsm) Loop stitching: Max ~3mm stitch thickness Wire size: Typically 0.4 – 0.6mm (No.24–27 range) Trim width: 2 – 25.4mm Max trim thickness: 10mm Max speed: Up to 6,000 booklets/hour A4 landscape: 5,300/hour

Condition: excellent (used), Year of construction: 2020, Ref:11142 . 2020 Horizon Stitchliner Mark III L Stitchliner with A4 Landscape capability. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections Bodpfx Alezyu Uyo Asdh No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 24 station (1 x VAC L600Ha + 3 x VAC L600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer Specification:

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, ITEC & Bobet Hygiene Gateways – Components – Custom Configurations Available from Stock. Complete solutions without the costs and long lead times of new equipment. HUVANTIS exclusively offers premium, tested hygiene infrastructure from stock clearance by industry leaders ITEC and Bobet Matériel. Why HUVANTIS? Significant Savings: A single ITEC turnstile with disinfection system currently sells for over €8,000 (new price). We offer complete systems at a fraction of this price. Immediately Available: No months-long delivery times. Available directly from stock in Büllingen (BE) / Auw (DE). Planning Included: We don’t just supply hardware. We also offer CAD-based planning for your hygiene passage (personnel flow analysis, black/white zone separation). Bdsdpfxsy N T Rhe Al Aoh CURRENTLY AVAILABLE CONFIGURATIONS: 1. Modular ITEC System (Configuration 1): ITEC continuous sole cleaner with turnstile Separate ITEC hand disinfection station with rotary gate ITEC touchless hand wash basin, soap dispenser & hand dryer Stainless steel guidance system (barriers & guides) Price: €3,150 net (plus VAT) 2. Compact Bobet Combo System (Configuration 2): Bobet continuous sole cleaner with integrated disinfection & turnstile ITEC hand wash basin (2 touchless taps) ITEC soap dispenser & hand dryer Stainless steel guidance system Price: €2,850 net (plus VAT) ADDITIONAL SERVICE: Custom CAD planning & consultation for your site: €800 flat fee. LOGISTICS & TERMS: Location: B-4760 Büllingen (BE) / D-54597 Auw (DE) Shipping: Europe-wide delivery by freight forwarding available on request Invoice: Official invoice with separate VAT (BE-VAT) Condition: Used, technically inspected, sold “as is” A detailed 4-page dossier with technical drawings and a list of individual components is immediately available as a PDF upon request.

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Bdjdozzz Najpfx Al Aeh Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Bodpfot D E Aiox Al Aedh Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s General data Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Bdodpfxeyhd Imo Al Aeh Specifications: Power: 11 kW

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. Bdjdpfx Asy Hixvsl Aoh • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SAK-66 shingle belt delivery table. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm.

Condition: like new (used), Year of construction: 2020, load capacity: 800 kg, lifting height: 1,880 mm, construction height: 1,380 mm, operating hours: 661 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V Mast: 2W1880 ID: 24091.5051 Bsdszv Rykepfx Al Aedh Category: Demo Mast: 2W Lowered height: 1380 mm Lifting height: 1880 mm Capacity: 800 kg Platform height: 1200 mm Order picking height: 2800 mm Init.: Yes Year: 2020 Operating hours: 661 h Battery capacity: 24 V / 500 Ah Options: SAFETY gates! Complete, LIKE NEW!

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 1,880 mm, construction height: 1,560 mm, operating hours: 3,102 h, fuel type: electric, mast type: duplex, Manufacturer & model: TOYOTA OSE 100 Mast: 2W1880 ID: 25110.8747 Category: Used Mast type: 2W Lowered height: 1560 mm Lifting height: 1880 mm Capacity: 1000 kg Platform height: 1200 mm Picking height: 2800 mm Initial lift: Yes Cabin width: 800 mm Year: 2020 Operating hours: 3102 hours Battery capacity: 24V / 620Ah Bdedpfezv Rz Ujx Al Aeh Options: with SAFETY gates !!

Condition: used, Year of construction: 2002, The Fogg Monoblock Filler is a type of packaging machine designed for filling and capping bottles, typically used in industries like beverages, pharmaceuticals, and cosmetics. Here’s a brief description: Features: - Monoblock Design: Combines filling and capping processes in a single machine, enhancing efficiency and reducing the footprint on the production line. - Suitable for 38mm Caps: Specifically designed to accommodate 38mm diameter caps, which are commonly used in various bottle types. - Filling Mechanism: Utilizes a volumetric or gravimetric filling system to ensure accurate liquid filling, essential for maintaining product integrity and compliance with regulatory standards. - Speed and Efficiency: Capable of high-speed filling and capping, improving overall production throughput. - Versatile: Can handle various liquid types, from water to thicker, more viscous products depending on configuration. Applications: - Commonly used in the beverage industry for filling soft drinks, juices, and other liquids. - Suitable for pharmaceutical products requiring strict filling standards. - Used in cosmetics for lotions, shampoos, and other liquid products. Benefits: Bdedpez Ht Icofx Al Aoh - Streamlined production process reduces handling and transfer times. - Improved accuracy in filling minimizes spillage and product waste. - Enhanced product shelf life due to airtight sealing. Dawson Debagger, which is suitable for 250ml bottles. We used to use the NAMPAK type (50mm x 50mm square), and 2 bags would fit width ways. A total of 6 bags could go on the bed at any one time, meaning a capacity of approximately 1500 bottles. We added a special air operated "gate" to the end where the dogchain is, which was for using PET bottles. As the PET bottles were smooth, they tended to stick together - so the function of the gate was to separate the row of bottles that was about to be swept by the dogchain from the rest of the bottles on the bed,. It worked very well, so we also used it for the HDPE bottles. The overall length is around 4.5m, and the width of the bed is I think 1200mm, with the widest part of the machine at about 1.8m. It runs on single phase power (16a, blue plug or hard wired) and has a variable bed speed setting. Speed: 0-8000 b/hr Depending on Volume Type: Monoblock CIP: Ring for connection Cap Feeder: Included Automation: Authentic Fogg controls Filling Heads: 18 Capping Chucks: 5 Cap Type: 38 mm Bottle Type: square Labeller: Graham Labeller Debagging Table: Dawson Included Collection Table: Included Conveyors: 13 meters and bends Bottle Rinser: Included Available: Immediately

Condition: excellent (used), Year of construction: 2016, Ref: 11137 . 2016 Horizon SPF-200L Latest model, high speed, fully automated booklet maker with A4 landscape format capability With additional trimmer for 3 sided cutting! Features: Advanced Automation – All necessary settings for a wide variety of booklet formats can be performed automatically. Even the fold roller gap adjustment is automated so very quick changeover with minimal test sheets. 10.4’’ large colour touchscreen with icon-based display for easy operation Cost Savings –works with pre-cut 4-page sheets instead of folded signatures to eliminate the folding process. Equipped with: 3 x Horizon VAC-600Ha+m+c towers (18 Bins) PJ-77R Jogger delivery for rear collation off C tower IFU-200 connecting unit SPF 200L Stitcher and folder 2 x 43/6-S Hohner Stitching heads FC 200L Foredge trimmer TBC-200L Top and bottom trimmer Waste paper removing conveyor PK-30 kicker LC-200 delivery Specification: Sheet Size: Max. 356 x 610 mm or 14.000” x 24.000” Min. 120 x 180 mm or 4.725” x 7.090” Sheet Weight Range: Normal Paper: 64 to 157 gsm Art Coated Paper: 84.9 to 157 gsm Stitch Thickness: Top/Side Stitch, Corner Stitch and Fold Max. 4 mmor 0.155” (About 48 sheets of normal paper 64 gsm) Bodjzuth Ijpfx Al Aodh Production Speed: Max. 4,000 booklets per hour (A4-Finish, Portrait) Max. 3,500 booklets per hour(A4-Finish, Landscape)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 45,992 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 28 mm, injection pressure: 1,069 bar, injection weight: 9 g, total length: 2,050 mm, total width: 1,030 mm, total height: 2,780 mm, overall weight: 900 kg, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Bdjdpsywx Hqjfx Al Ajh Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: used, Year of construction: 2022, Automatic mortising machine with 3 heads ideal for mortising of doors, gates, gate posts, general joinery Worktable dimensions 3000 x 300mm Cast iron construction to give maximum rigidity 3 x vertical hydraulic work piece clamps 3 x horizontal hydraulic work piece clamps Speed movement is adjustable through hydraulics Automatic operation 3 x Mortising heads each : Manually positioned in X axis with mechanical locks Bdsdpfx Aszd Uy Rsl Aeh Mechanical siko readouts for height position - Z axis Double eccentric operation of the heads (patented design) Each mortise head Motor HP3 RPM 2800mm Max distance between 2 x outside mortising heads 2800mm Min distance between 2 x outside heads 180mm - centre to centre of mortise. Dust extraction outlets 100mm Hydraulic pump motor 10hp Serial nr - 127-22 Year - 2022 CE

Condition: refurbished (used), Year of construction: 1998, workpiece weight (max.): 15,000 kg, travel distance Z-axis: 1,000 mm, chuck outer diameter: 1,750 mm, spindle speed (max.): 400 rpm, turning diameter: 2,100 mm, turning height: 1,350 mm, rotational speed (max.): 3,000 rpm, feed force Z-axis: 50,000 N, year of last overhaul: 2026, The Millennium provides very high precision turning and versatile machining capability. Always precise, always powerful. Features of this machine:- – Involute chain drive for very high speeds, very low noise – a 36” diameter Timken cross roller bearing, the ultimate bearing – see last page – All steel 1750mm dia. 4 jaw chuck for high speeds. Maximum loading 15,000kgs. – A servo powered C axis control that provides backlash free C axis movement – high power and high accuracy – 200mm square forged steel ram - high accuracy heavy cutting when required and incorporating a 15KW ISO 50taper live spindle providing speeds 20 to 3000rpm for rotary contour milling, pcd drilling and angle milling and grinding with attachments (new heads can be provided to order). 1350mm maximum height under ram – Automatic pick up of turning tools, live tools and attachments from the 18 pocket tool magazine – Raise and lower crossrail - high precision latching and clamping at 200mm pitches – flexibility without loss of accuracy Fanuc 18Ti. A very precise, powerful and versatile machine tool. Performs all functions shown in photo gallery Bdedpey Uwxtofx Al Aoh 12 months guarantee

Condition: reconditioned (used), This Duplo DBM-120 Booklet Maker with DBM-120T Trimmer provides a compact and versatile solution for producing professionally stitched, folded and trimmed booklets. With a booklet count of approximately 217,000, the system has been fully serviced, inspected and production tested by our engineers, ensuring it is ready to go straight into production. This particular machine also includes a purpose-built stand, positioning the booklet maker at a comfortable working height and making it considerably easier to operate when hand-feeding pre-collated sets. Ideal for digital printers, commercial printers and in-plant finishing departments, the DBM-120 can produce booklets at speeds of up to 2,400 booklets per hour. The system can process sets of up to 20 sheets of 80gsm, producing booklets of up to 80 pages, while the integrated DBM-120T fore-edge trimmer removes the open edge after folding to give each booklet a clean, professional finish. Key Features ✅ Approx. 217,000 booklet count ✅ Stitch, fold and trim in one production process ✅ DBM-120T automatic fore-edge trimmer ✅ Purpose-built operator stand for easier hand feeding ✅ Up to 2,400 booklets per hour ✅ Produces booklets up to 80 pages / 20 sheets of 80gsm ✅ Automatic setup for quick job changes ✅ 10 preset and 3 custom programmes ✅ Saddle stitching, side stitching, corner stitching and fold-only operation ✅ Automatic adjustment according to set thickness ✅ Fine adjustment of staple, fold and trim positions ✅ Twin staple heads ✅ 5,000 staple capacity per head ✅ Can be operated standalone or inline with compatible Duplo collators Ideal for Standalone Digital Print Production One of the advantages of this particular DBM-120 is the addition of its purpose-built stand. The stand raises the system to a practical working height, making it much more comfortable for an operator to hand-feed pre-collated sets directly into the booklet maker. This makes the system particularly well suited to short and medium-run digital booklet production, without requiring a separate collating tower. Simply print and collate the sets digitally, hand feed them into the DBM-120 and the system takes care of the stitching, folding and fore-edge trimming. Simple Automatic Setup Bdedoz D H Nhspfx Al Ajh The DBM-120 has been designed for straightforward operation and fast job changes. The operator selects the required programme and the machine automatically adjusts for the job. Fine adjustments to the staple position, fold position and trim position can then be made where required and stored for future use. With 13 programme positions, repeat jobs can be recalled quickly, helping reduce setup time and waste between different booklet formats. Professional Booklet Finishing The DBM-120 automatically stitches and folds each set to produce a consistent, securely finished booklet. The connected DBM-120T Trimmer automatically trims the fore edge of the booklet as it exits the booklet maker, removing the uneven edge created during folding and providing a clean, professional finished product. System Includes Duplo DBM-120 Booklet Maker Duplo DBM-120T Fore-Edge Trimmer Purpose-built operator stand Serviced & Tested by Glendale This DBM-120 has been fully serviced, inspected and production tested by our engineers. The complete system has been checked and tested under production conditions to ensure correct operation before being offered for sale.

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 13.645, pressing force: 38 t, total width: 2,500 mm, total length: 6,200 mm, total height: 2,500 mm, overall weight: 14,700 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 4,700 kg, input current: 32 A, year of last overhaul: 2023, Avermann MPC16PE compaction container – fully overhauled in 2023 – double hook connection – drop gate For sale: Avermann MPC16PE compaction container with a capacity of 16 m³. This machine was fully overhauled by us in 2023. During the overhaul, the compaction container was completely inspected technically and subsequently blasted and repainted in RAL 7016 anthracite gray. As a result, the machine is in very good condition both technically and visually. The compaction container has a double hook connection, allowing it to be lifted from both sides. In addition, the machine is equipped with a drop gate, making this model particularly suitable for processing wet waste and other moist waste streams. Due to its robust construction, a load capacity of 10,000 kg, and its practical design, this compaction container is very suitable for, among others, industry, manufacturing companies, the food industry, hospitality, waste processing, and recycling. Technical specifications: Brand: Avermann Type: MPC16PE Bdjdpfx Ajz Ephcsl Ash Machine number: 13,645 Overhaul year: 2023 Capacity: 16 m³ Power supply: 400 V Power: 5.5 kW Fuse: 25 A slow-blow Own weight: approx. 4,700 kg Maximum load weight: 10,000 kg Color: RAL 7016 anthracite gray Double hook connection Equipped with a drop gate Suitable for hooklift transport Very suitable for wet waste / moist waste streams Details: The machine was completely overhauled, blasted, and repainted in 2023. During this process, the compaction container was technically inspected and reassembled in excellent condition. A very neat and well-executed compaction container for companies looking for a professional, overhauled machine without the investment of a new compaction container. Inspection and testing are possible by appointment. Please feel free to contact us for more information, prices, or technical questions. Keywords: Wortmann, Avermann, MPC16PE, MPC16, compaction container, 16 m³ compaction container, waste compactor, container compactor, wet waste, drop gate, double hook connection, waste compaction, recycling, compactor, overhauled compaction container.

Condition: excellent (used), Year of construction: 2024, spindle bore: 44 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, spindle motor power: 7,500 W, total height: 1,800 mm, total length: 2,500 mm, total width: 1,300 mm, quill diameter: 32 mm, overall weight: 3,500 kg, CNC Lathe with c-axis QuickTech - T6 MILL MACH-ID 9822 Make: QuickTech Type: T6 MILL Control: Mitsubishi Touch YOP: 2024 Max. turning Ø: 400mm X-Axis: 200mm Z-Axis: 300mm Spindle bore: 44mm Speedrange: 5000Rpm Bedpfx Aljz H I Hao Aedh Spindle power: 7.5kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5kW Pinole taper: 4Mk Stroke pinole: 70mm Quill Ø: 32mm Length: 2500mm Width: 1300mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Feed rate: max. 15 m/min Bdjdjz Ehfaopfx Al Aeh Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Year of construction: 2024, condition: new, 6 STAFSJO brand guillotine valves MV model D50 / 2" Maximum pressure: 16 BAR Bdjdpfxexv Ac Re Al Aeh New product, never installed.

Year of construction: 2020, condition: ready for operation (used), Four identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible. Bodpfsugmwlsx Al Aodh

Condition: used, Year of construction: 1999, Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Bdodpfx Alomqty He Ash Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Year of construction: 2018, thread length: 120 mm, overall weight: 2,200 kg, total height: 1,800 mm, total length: 1,800 mm, total width: 1,300 mm, Treading machine PEE-WEE - P10CNC MACH-ID 9816 Make: PEE-WEE Type: P10CNC YOP: 2018 Roll set M14 x 1 PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 Left PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNF PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNJF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNJF PPS Ø 180 x 54 hole x 40 width 1 set universal linear guider 120 mm 1 set steady rest for to heavy workpiece 1 set HM support length 40 mm for 1/4, 5/16 and M14 Rolls 2 x cabinet with tool drawlers and work bench Miniumum pressure: 1T Maximum pressure: 10T Max. workpiece: 40Ø Min. workpiece: 3Ø Min. Threading lenght:20mm Max. Threading length:120mm Shaft Ø: 54mm Length: 1800mm Bdjdpfxoz Ha Hlj Al Ajh Width: 1300mm Height: 1800mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Bsdpfx Asymayvsl Aedh

Condition: used, Year of construction: 2001, Transnorm belt conveyor belt conveyor 1300-700-600 gate passage RA2234 Bsdpjri Sndofx Al Ajdh Technical data: Manufacturer: Transnorm Year of manufacture: 2001 Condition: good (used) Motor: fully functional conveying length (FL): 1300 mm nominal/outer width (NB): 700 mm 900 with barings and Motor belt width (GB): 600 mm overall height (BH): 85 mm motor height (MH): 450 mm Motor type: SEW geardrive, W20DT63L4 Motor power: kW 0,25 230/400 V 50Hz Conveying speed: contact us Scope of delivery: one support Optional: Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik