Multi blade saw

WEINIG Transportkette 59 Glieder

Condition: refurbished (used), Year of construction: 2001, Balz Debarking Machine BG 90 6W-GR Year of manufacture: 2001 Completely overhauled in 2022 and not reassembled afterwards Minimum diameter: 14 cm Maximum diameter: 90 cm With conveyor systems for infeed and outfeed Nodpfxoy Iabds Abuewn Immediately available – Fully overhauled Location: Austria, near Linz

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E Nwodpfx Ajyt Iawjbuen stationary with magnet + 2 pairs of new shafts Machine is without gearbox.

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (L x W x H) approx. 1,800 x 1,500 x 2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Working disc speed 45/70/90/140 rpm Working power, main drive 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with operating panel Nedpfx Abeh Invrsujwn Full-fledged lapping machine, conventional control

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Nwjdpfxsukhd Ao Abujn Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table Nsdpfxoidmpts Abuswn two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Face grinding machine Year of manufacture: 1985 30 kW grinding motor Modicon control system Magnetic control, 6 stages Nwjdpfx Abjd E Np Ejujn Magnetic size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Nwjdpfx Aoy Ehrxobusn Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads Nodpfx Abopqxnxouown 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty .

Year of construction: 2020, condition: new, Dimensions: 250x250x80mm Njdpedzqw Ijfx Abuown Filter systems are used for the thorough separation of finest ferrous metal contaminants. Examination of shoe goods Universally applicable in pipe systems, funnels & slides Easy handling and cleaning Permanent magnetic filter grids can be manufactured in round, rectangular or square design. Ferrous particles are reliably filtered out of the ware as they pass through the grates. In addition, this design provides easy cleaning of the stave. The filter system can be removed from the jacket with a handle. The maximum operating temperature is 80 ° C.

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Nsdpfxowd D Its Abuswn