Used Briquett Bagging Maschine for sale (3,414)

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand toner refill machine, the “MS Mis Ultimate Toner Refill Machine” Item for sale: 1 x MS Mis Ultimate Toner Refill Machine Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: Lsdoz Iz Rbopfx Ab Neah You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: like new (used), functionality: fully functional, total width: 15,000 mm, total length: 240,000 mm, total height: 9,000 mm, Model: Saxon 5 Ledpoz H T Dwsfx Ab Noah Manufacturer: Fischbein Machine type: Continuous hot‑air bag sealer Power: 220V single‑phase, 66 A Typical use: Sealing pillow‑style heat‑sealable plastic bags in fast‑paced production lines

Year of construction: 1997, condition: used, functionality: limited functionality, machine/vehicle number: 9.037, The flat pouch packaging machine is suitable for packaging granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be packaged and an intermittent supply of the packaging material. All packaging operations are performed in automatic mode. In 2006, the packaging machine underwent a complete overhaul and was equipped with an automatic twin-scale dispenser as an additional machine unit. As a result, the machine is suitable for dispensing not only powdered materials but also granular materials (e.g., coffee, pasta, soup granules, etc.). The equipment was removed from production; there were no problems with it, but it has not been in operation for a long time and may therefore require refurbishment. Lasdpfx Abjz Ryhxo Njh Stored in a covered, enclosed warehouse.

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 106 mm, turning length: 2,130 mm, turning diameter: 650 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 4,290 mm, total width: 2,553 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 11,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 400 V, drill spindle diameter: 106 mm, nominal power (apparent): 20 kVA, number of spindles: 1, spindle nose: A1-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 119,500.00!!!!! The machine is immediately available and NEW. Delivery of the machine in overseas packaging from our warehouse. (Transport of the machine at the buyer’s expense) Operating materials to be provided by the buyer. Commissioning and training by Milltronics: EUR 5,000.00 Leasing possible (subject to creditworthiness) Machine Details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automatic sequences • Custom macros available • Override potentiometers for axes and spindle • Spindle load monitoring • Key switch to lock EDIT function • Lights to indicate operating status • Additional “M” function with CNC wait channel • Constant cutting speed • Rigid tapping • Spindle speed 30 – 1,600 rpm • Spindle motor 18 / 11 kW, 2-stage electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 positions 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One tool holder for boring bars 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list and circuit diagrams in digital format • Operating manual and maintenance manual in digital format • Transformer for standard industrial power supply 400 volts, 3 phase • Lifting brackets for crane transport Laedpfoztrklox Ab Nsh Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in combination with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Travelling steady rest with brass pads, range 20 mm - 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Foot mat with Milltronics logo

Condition: used, AZO GmbH big bag discharging station with metering screw and vibrating base Includes buffer silo, vibrating base, and metering screw with end gate. Includes platform and staircase. Includes filter housing with dust extraction system, 1500 m³/h. Frame made of coated steel. Big bag discharging station entirely made of stainless steel. See our other listings. Ljdpfx Abez Hc T Is Noah

Condition: good (used), functionality: fully functional, Production line for sealed block bottom bags and standard paper bags. Upon request, we can sell you only the paper bag machine. The necessary parts are available. The sealing unit can also be used offline without the bridge. Lasdpfxozgwnis Ab Njh Pre-printed bottom sheet Self-adhesive bottom sheet In-line coding printer Material: Paper and composites Format: Bag width: 140 mm - 320 mm Bag length: 240 – 900 mm Bottom width: 70 – 180 mm With servo drive - Block bottom standard materials: Uncoated paper: 70 g/m² and 100 g/m² Coated paper: 80 g Plastic films (LDPE): 40 µ, 70 µ and 100 µ PE-coated paper: Pa 60 g/m² + LDPE 40 g/m² airsickness bags: Pa 65 g/m² + LDPE 23 g/m² Paper-aluminum-PE composite: Alu 8/25 and Alu 8/50 PET/Alu/PE composite: PET 12 µ / Alu 8 or 9 µ / LDPE 90 µ - Possible materials Outer layer Coated paper 60–120 g/m² Over 100 g/m² only in large format Inner layer LDPE mono-film 0.03–0.10 mm (possibly needled) Alternatives: LDPE 0.08–0.12 mm OPP 20–40 µ PE-coated paper (various combinations) Aluminum foil on carrier paper with PE coating Construction from outside to inside 30 g/m² bleached kraft paper 12 g/m² PE 0.008 mm aluminum foil 25 or 50 g/m² PE Intermediate layer (only with material 21) Alternative: Bleached kraft paper 80–100 g/m² Brown kraft paper 80–100 g/m² LDPE 80–100 µ

Condition: used, Closes bags with a strip of tape around the neck The SBS FlexSeal closes bags, for example of bread, vegetables or fruit, by applying a strip of tape around the twisted neck. You hold the bag against the brushes, which draw in and twist the neck; the machine then wraps a piece of tape around it and cuts it off automatically. It is operated from an Allen-Bradley touchscreen and stands on a base with castors. We did not find a rating plate with the year of manufacture. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Bag closer with tape Infeed: Two brushes that draw in and twist the bag neck Controls: Allen-Bradley touchscreen Lajdpfez Nc Nzex Ab Njh Construction: Stainless steel, on castors

Condition: used, Gainsborough bagger and All-Fill powder depositor. Lsdpfx Ajvvppheb Neah

Condition: new, Year of construction: 2027, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 600 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 24,000 rpm, number of spindles: 1, number of slots in tool magazine: 9, Five-axis CNC machining center – 3D CNC machining center Availability: April 2027 > The CNC milling machine base model is the ideal entry-level machine for milling plastics, composite materials such as carbon fiber reinforced polymers (CFRP), model-building materials, or aluminum. Ljdpfxs Adqrgs Ab Nsah > High feed rates, a compact 5-axis milling head for 3D machining, and first-class milling results: The machine is individually adjusted to the material requirements before delivery. This ensures first-class surface quality and excellent milling results for all materials. > Using an attachment from HG GRIMME SysTech, the milling quality can be further significantly improved. Existing attachments or tables can be reused at any time. > Modular expansion stages: The CNC machine can be upgraded at any time, and individual requirements can be quickly implemented. For example, an optional partition wall allows unloading and loading on one half of the table while the workpiece is being machined on the other half. This technology accelerates the production cycle. > Safe operation: The safety cabin already has a generous access area in the basic configuration and can optionally be upgraded with a soundproofing package. All drives and guides are protected and located above the milling area. We offer approximately 365 ways to customize your CNC machining center precisely to your workpiece and material. The base machine can be expanded at any time.

Year of construction: 2016, condition: used, • Machine length: 13,300 mm • Machine width: 3,300 mm • Web width: 600 mm • Operating voltage: 200 VAC, 50/60 Hz, 3-phase • Power rating: 62 kVA • Current: 179.1 A • Maximum output with stacking system: 180 cycles/min • Main operating side: left side, facing the direction of travel Lsdpfx Abs Adl H Se Njah Production Capabilities: • Three-sided sealed pouches • Stand-up pouches with elliptical bottom (Doypack) • Pouch width: 60–250 mm • Pouch length: min. 110 mm, max. 270 mm (two lanes), max. 540 mm (single lane) • Bottom gusset: 40–90 mm (extended, including edge trim) • Processable materials: PP/PE, PET/PE, PET/ALU/PE • Film thickness: 80–250 µm Equipment: • Parent roll unwinder with web edge control • Unwinder with winding shafts for 76 mm and 152 mm cores • Maximum clamping width: 1,200 mm • Maximum roll diameter: 800 mm • Bottom gusset strip unwinders for 76 mm cores • Maximum clamping width for bottom gusset strips: 160 mm • Maximum roll diameter for bottom gusset strips: 800 mm • Fine dust extraction for bottom gusset strips • Punching waste extraction for bottom holes • Cooling unit for cooling stations • Transformer for operation on a 400 V power supply • Bottom sealing with cooling, individual sealing process • Electrically adjustable top-sealing station • Automatic registration adjustment to the printed image • Two draw rollers • Cross-sealing unit with six sealing stations and three cooling stations • Punching station for hanging holes with two punches • Punch holder for knives up to 260 mm wide • Complete punching of the pouches from the film web • Pouch stacking unit with discharge conveyor • Packing table and roller conveyor • Punching grid rewinder with two winding positions

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 Ljdpjz Imu Ssfx Ab Neah yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: used, OK Supersealer Continuous Bag Sealer Stainless steel Adjustable height Adjustable temperature control for different gauge bags Mobile on castors Lajdjzcff Aopfx Ab Neh Bag infeed from right to left The best bag sealer on the market Price € 4,950

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: Ledpfx Aoy Sub Hsb Neah • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: good (used), functionality: fully functional, total height: 1,500 mm, total width: 1,700 mm, total length: 2,250 mm, type of input current: three-phase, overall weight: 500 kg, film width: 650 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (max.): 199 mm, nominal power: 4.5 kW (6.12 HP), Side sealing machine – in very good condition, fully functional For sale is a high-quality side sealing machine in very good, well-maintained condition. The machine is fully functional and has been regularly serviced. The side sealing machine is ideal for the professional packaging of products with shrink film and ensures uniform, clean packaging results. Details: Very good, well-maintained condition Fully functional Uniform heat distribution Robust industrial design Laedsy Ttrmspfx Ab Njh Ideal for production and packaging lines The machine can be inspected and tested on-site by arrangement. If you are interested or have any questions, please do not hesitate to contact us. Data sheet Box Motion Side Sealing Machine DEAPSS-5025BM Model DEAPSS-5025BM Applicable films (half-tube): POF / PP / PE Sealing mechanism 1: Longitudinal sealing (pneumatic) Sealing mechanism 2: Traveling transverse sealing (pneumatic) Sealing blade width (transverse): 500 mm Maximum product height: 199 mm Maximum format width (W + H): 450 mm* Maximum roll size (L x Ø): 650 x Ø 300 mm Machine size (L x W x H): 2250 x 1700 x 1500 mm Conveyor belt speed: 35 m / minute Maximum power consumption: 4.5 kW Connection voltage: 400 V / 3 phases Sealing cycles: up to 100 pieces / minute Air pressure (dry air): 6.0 bar Machine weight: approx. 450 kg

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Due to warehouse clearance and inventory reduction, various machines are offered here as untested, defective, for refurbishment, or for parts. The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Briquetting press / Chip press Manufacturer: RSN Type: ECO Motor power: 5.5 kW Briquet diameter: approx. 60 mm Year of manufacture: 1987 Dimensions: approx. 235 cm x 130 cm x 113 cm The machine has been stored in my warehouse for some time. Laodpfx Abez Efvco Noh It was once taken in as part of a trade-in, but there was never enough time to assemble and inspect the machine. Sale is exclusively as a defective parts machine or for refurbishment by hobbyists. Any defects cannot be ruled out. Visually, the machine appears to be complete. No parts are missing. (See pictures. A prior inspection is highly recommended; simply leave your phone number via email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information is without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading and packaging can be arranged by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options, so please inquire. The stated selling price is the net price plus VAT. An invoice with VAT breakdown will be issued. Warranty basis: due to age and wear, the sale is exclusively to business customers without warranty, guarantee, or right of return. All information is without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, the warranty period is 12 months.

Condition: used, OK Continuous Bag Sealer Lsdpfxszcg R To Ab Njah Stainless steel Adjustable temperature control for different bag gauges / micron Adjustable height mast Mobile on castors Price € 4,950

Condition: like new (used), Year of construction: 2023, operating hours: 80 h, functionality: fully functional, Equipment: documentation/manual, We offer this like-new HEIDE Klamotec BigBag loading station container filling system, manufactured in 2023. Manufacturer: HEIDE Model: Klamotec Year of manufacture: 2023 Condition: like new Category ID: 437 Type ID: 256 Lodezwuqvepfx Ab Njah Machine type: BigBag loading station container filling system If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 844, PLEASE READ THE DESCRIPTION CAREFULLY Used IPF25 filling machine with integrated weigher for filling paper open-mouth bags, including bags with handles. The machine is suitable for processing a variety of bulk products, such as: Cat litter Pet food Charcoal Wood pellets Other dry bulk materials .... Ledpfx Aozrvldsb Noah Bag dimensions: Width: 150 to 300 mm Length: 300 to 600 mm Side gusset: 35 to 85 mm The machine is currently in our workshop and is undergoing refurbishment. The refurbishment work will be carried out in stages. If you are seriously interested, we can expedite this process so that the machine becomes available sooner. Please feel free to contact us for additional information or to arrange a viewing.

Condition: like new (used), Year of construction: 2025, operating hours: 280 h, functionality: fully functional, film width: 400 mm, number of blades: 2, product height (min.): 60 mm, product height (max.): 150 mm, product length (min.): 40 mm, product length (max.): 150 mm, filling weight (min.): 2 g, filling weight (max.): 100 g, Pillow-pack filling and sealing machine. Suitable for packaging sauces, creams, mayonnaise, and salad dressings. The machine produces 3- or 4-side sealed sachets (ranging from 2g to 100g) from flat film, with an output of 40–60 units per minute. It is suitable for use in the food, cosmetic, and non-food industries. A 300-liter, 15 kW homogenizer can be connected as an optional accessory. Ledpfxsz Dgdfj Ab Nsah

Condition: used, Year of construction: 2012, The machine is designed for the production of: • Stand-up pouches (Doypack / SUP) with bottom gusset • Three-side seal pouches (3SS) • Flat pouches • Bottom-gusseted pouches with shaped bottom contours Technical Data: • Machine length: 16,900 mm • Machine width: 5,500 mm • Machine passage width: 800 mm • Operating voltage: 400 V, 50 Hz, 3-phase • Control voltage: 24 V DC • Power rating: 125 kW • Current: 235 A • Maximum web feed speed: 3.0 m/s • Maximum output: 150 cycles/min • Maximum output with stacking system: 130 cycles/min Ledpfjz Szcysx Ab Noah • Main operating side: left-hand side in the direction of web travel Production Capabilities • Three-side-sealed pouches • Stand-up pouches • Pouch width: 90–340 mm • Pouch length: min. 80 mm; max. 375 mm (two lanes), max. 750 mm (single lane) • Bottom gusset depth: 20–75 mm • Processable materials: PET/PE, PA/PE, PET/ALU/PE • Film thickness: 80–250 µm Equipment • Shaftless unwind stand with web edge control • Height-adjustable unwinding position • Unwind stand for 152 mm cores • Maximum clamping width: 1,600 mm • Maximum roll diameter: 1,200 mm • Bottom-gusset strip unwind stand with web edge control • Bottom-gusset strip unwind stand for 76 mm cores • Maximum clamping width for bottom-gusset strips: 450 mm • Maximum roll diameter for bottom-gusset strips: 1,000 mm • Dancer system for roll changes during machine operation • Fine-dust extraction for bottom-gusset strips • Hot embossing station • Sealing presses with cooling, complete sealing process • Bottom-contour punching unit and bottom opener • Punching-knife holder for 310 mm wide knives • Bottom pre-opening unit with additional embossing function • Longitudinal edge trimming with additional punching unit • Six knife holders with trimming blades replaceable during production • Suction conveyor with three waste-removal rollers for punched corners • Pouch stacking unit with lateral discharge conveyor • Reject diverter into a mesh container • Swivelling packing table • Carton sealer and roller conveyor • Matho central extraction system for punching waste • Extraction of bottom-hole, corner and bottom punching waste • Edge-trim extraction with shredding function • Waste collection in a Big Bag

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: 01603, Used Cryovac BL 14 manual bag loader. Year of manufacture 2011, very good condition and work, power supply 0,35 kW, 50 Hz, 220V, 10 A, serial number 01603. It dispenses the bags by winding the bag tapes onto a spool and opens them by means of an air stream created by a blower unit. Minimal bag contamination ensuring superior seal integrity Lodpfxjz Evnps Ab Njah Fast adjustment of bag width Machine achieves up to 30 products/min depending on operator Effective bag operability to minimize misleading Short downtime between refills with Cryovac Plug’n Pack system Quick change over to minimize downtime during product size changes Applications: Poultry; Cheese; Processed meat Robust, high quality build standard using food approved materials throughout - Light and easy to move - Versatile in application - Electrical supply only - Hygienic design makes cleaning easy and effective Sales price: 2.400 Euro + VAT, negotiable, FCA Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: defective spare-parts repository (used), functionality: unexamined, Due to warehouse clearance and clean-up, various machines are offered here as untested, defective, for refurbishment, or for parts. The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Briquetting press SPÄNEX COMAFER, defective Briquetting press Type: SH50 Capacity up to 50 kg/h (material-dependent) Density 0.8 - 0.9 kg/dm³ (material-dependent) Laedpfx Ajz Efvpsb Neh Briquet diameter approx. 50 mm Dimensions approx. 230cm x 140cm x 125 cm Feed hopper: diameter 120cm, height 93 cm Volume 1m³ Weight approx. 500 kg Can be installed under a dust extraction system The machine has been in my warehouse for some time. The machine is explicitly sold as defective, for spare parts, or for rebuilding by hobbyists, for export, etc. The machine is usually complete, but a functional test cannot be carried out. There are 2 identical machines in stock. The machines can also be purchased as a package. Condition: see pictures. (See pictures – a prior inspection is strongly recommended; simply leave your phone number by email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information is without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Warranty basis: due to age and wear, the sale is exclusively to business customers without any warranty, guarantee, or right of return. All information is without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, the warranty is 12 months.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Ideal machine for very flexible bags (Vol up to 60 Liters) Ledpfx Asx I D Tksb Noah Impusl sealing for PE-Films Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Machine is in very good condition.

Condition: used, Year of construction: 2000, operating hours: 9,188 h, Neuson 6002RDV mini excavator, manufactured in 2000, German machine! ---- * Manufacturer: Neuson * Model: 6002 RDV * Year of manufacture: 2000 * Operating hours: approx. 9,188 * German machine * Operating weight: approx. 5,700 kg * Includes 1 x bucket * Power: 47.5 kW * More photos and videos available upon request (WhatsApp Erik) * Price: 12,900 euros, net + 19% VAT Laodpfx Aez Ed Drjb Neh ---- For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee, errors and prior sale excepted.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 34/1998, type of input current: three-phase, input voltage: 380 V, total length: 21,300 mm, air demand: 34 m³/h, Complete used packaging and palletizing line, perfectly integrated and operational, ideal for granular, powdery, and similar products (soil, fertilizers, peat, nutshells, and bulk materials for agricultural and industrial use). The system includes all process stages: 16 m³ peat hopper with clod-breaking devices, 0.8 x 13 m conveyor belt, Loro & Parisini hammer mill model M66 (30 kW), 10 m³ feed hopper, 0.8 x 14 m feed belt for the bagging machine, ESSEGI bagging machine model CTS 80 (serial no. CTS 80 34/98, year 1998, 11 kVA) with forming tubes for 10-20-45-70 liter bags, ESSEGI bag compactor, TMG palletizer model SIRIO 1S80 (serial no. 2.500.12.98, year 1999, 14 kVA), ROBOPAC wrapping machine model AVR 201/ATS with rotating arm, pre-stretch, and top anti-drip function, rotating pallet discharge platform with roller conveyor, dust extraction system, electrical systems, and compressed air system (compressor excluded). The system is already operational, previously purchased and used by the company for producing bags ranging from 10 to 70 liters, and is in good overall condition. Estimated capacity is 350–500 bags/hour, depending on the product and format. Photos, layout drawing, and further technical documentation are available upon request. Price negotiable. The entire system is being sold as a complete unit. Laodpfx Ajz E Dagjb Njh