Used Calibrating for sale (889)

Year of construction: 2010, condition: used, Levibreton KGP is a calibrating machine for levelling strips and tiles, which move on a conveyor belt, using a series of diamond tools. Hodevun T Aepfx Ab Uofr

Condition: used, machine/vehicle number: 008291, Position 1: Bottom Sanders VIET-S3 - VALERIA Position 2: Top Sanders VIET-S3 - VALERIA Hfjdpfx Abjx A Tayo Uor

Condition: used, Year of construction: 1987, functionality: unexamined, Press force: 200 kN Ram stroke, constant: 210 mm Adjustable strokes per minute: 20 - 60 Usable working energy per cycle: 15 kJ Drive power: 24 kW Tool installation height between table and ram, stroke down, adjustment up: 500 mm Ram adjustment: 100 mm Hsdpfxowy Sqzo Ab Uofr Ram clamping area: 600 x 600 mm Table clamping area: 600 x 600 mm Ejector stroke: 90 mm Weight: 20 t

Condition: used, Automatic Calibrating–Sanding Machine – Viet model CHALLENGE 211 RR, CE Technical Specifications • Working width: 1,310 mm • Abrasive belt dimensions: 2200 x 1130 mm Hedpfx Aox Eyqgjb Uofr Working groups: • 1st group: hard roller for calibration (90 Sh CA) • 2nd group: roller for sanding Equipment and performance: • Belt feed with variator motor • Operating pressure: 5–8 bar • Pneumatic exclusion of working groups • Automatic table positioning • Oscillating blowers for belt cleaning Technical data: • Weight: 1,540 kg • Total installed power: 13 kW

Condition: good (used), Year of construction: 2000, Calibrating milling machine Ledinek Rotoles 400 D Hfsdpfx Asxu T Uzeb Uer Min max working height 2-150 mm Max working width 400 mm Motor power 18 kW

Condition: like new (used), functionality: fully functional, working width: 1,350 mm, CALIBRATING SANDING machine with 2 belts model COSTA serie SK 5 CC 1350 second-hand machine , like new working conditions Excellent, machine like new inverter on 1° belt : YES Hjdpfxeu Dmnbo Ab Uofr inverter on 2° belt : YES inverter on carpet : YES fixed table, moving head machine with CE regulation: YES instruction booklet, CE declaration of conformity: YES for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various Technical data: Max. working width mm. 1350 Max working height mm. 160 Min working height mm. 4 Dimensions of abrasive belts mm.1380 x 2620 Advancement speed belt , with inverter , from 3 to 15 m/min (motor power Kw 1.1) Automatic centering perforated carpet (there is no vacuum group) Composition (2 belts, 2 independent motors) : 1st unit : Rubber Calibrating Roller - diameter mm 200 - shore 85 - motor power Hp 10. with inverter Automatic blowers for cleaning abrasive belts 2nd unit : Rubber Sanding Roller - diameter mm 330 - shore 45 - motor power Hp 10. with inverter Automatic blowers for cleaning abrasive belts Brake with automatic intervention Input roller conveyor Output roller conveyor Weight kg 2000 volt. 380/50

Condition: used, Year of construction: 2002, Levibreton KCP is a calibrating machine for levelling granite tiles, which move on a conveyor belt, using a series of diamond tools. This machine is based on a revolutionary processing concept, covered by Breton patent, which employs calibrating spindles with double motorization: in each spindle, the first motor provides the low-speed rotation of the roller-holding head, while the second motor provides the high-speed rotation of 6 radial rollers equipped with di-amond tools. This new technology offers the following advantages: - rapid adjustment of the working width as the calibrating section does not require any variation; - perfect surface levelling; Hodpsvuaxwofx Ab Uefr - "fine-honed" surface finish which enables to reduce the number of the following levelling units and, consequently, the dressing costs.

Condition: excellent (used), USED MACHINE - V380/50 - "CE" Code: CAL-052 Hfjdpfx Absxp Ecyj Ujr _ _ _ Working width: 1100 mm 1st group: steel roller 2nd group: rubber roller 3rd combined group: roller/pad Motor power: 2 x 15 kW

Condition: good (used), Year of construction: 2001, * 5 grinding units: - 1 bottom 18.5 kW - 2 lower 15 kW - 3 upper 18,5 kW Hfsdpfst Hmg Iex Ab Uor - 4 upper 15 kW - 5 upper 11 kW * stepless feed regulation on inverter (2x2.2kW) * electric adjustment of table height * pneumatic oscillation * grinding belt blowing

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, total width: 2,200 mm, total height: 2,400 mm, total length: 2,500 mm, working width: 1,300 mm, overall weight: 7,500 kg, working height: 900 mm, table height: 900 mm, power: 59 kW (80.22 HP), height adjustment type: electric, grinding belt speed: 1,400 mm/s, type of input current: three-phase, conveyor belt speed: 20 mm/s, grinding belt length: 2,640 mm, compressed air connection: 6 bar, table height adjustment: 120 mm, extraction nozzle diameter: 200 mm, power of feed motor: 4,000 W, Bottom calibrating sander for machine in production line, working width: 1300 mm, equipped with: 1 working unit: steel roller, motor: 37 kW; 1 working unit: roller, motor: 22 kW; dust cleaning brush. Hsdpfxswy Nndo Ab Ujfr

Condition: used, Chair seat sander Hfedpfx Absqgtblo Uor

Condition: like new (used), functionality: fully functional, CALIBRATING SANDING machine with 2 belts + brush unit model INFOTRONIC NEPTUN 115 RKSAVE . made in ITALY second-hand machine working conditions Excellent, machine as new Hsdpfx Ajv S Efkob Uofr machine with inverter on the carpet machine with CE regulation: YES instruction booklet : YES universal machine for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various Technical data: Max. working width mm.1150 Max working height mm.150 Min working height mm.3 Dimensions of abrasive belts mm.1165 x 2620 Advancement speed belt , with inverter , from 5 to 15 m/min Automatic centering Composition ( 1° e 2° unit , motor power Hp 25 . 3 speed ) : 1st unit : Rubber Roller diameter mm.170 - shore 45 Automatic blowers for cleaning abrasive belts 2nd unit : Combined Steel Roller + Electronic Segmented pad Steel roller diameter mm.170 Eectronic Segmented pad n.34 sectors Automatic blowers for cleaning abrasive belts 3rd unit : Brush . motor power Hp 0,75 Brake with automatic intervention Input roller conveyor Output roller conveyor Weight kg 2300 volt. 380/50

Year of construction: 2012, condition: used, Control system with VIET IPC CONTROL color display Terminal with the possibility of memorizing program positions Hfodjgnz N Njpfx Ab Ujr Automatic adjustment in real time of all the parameters necessary for processing Automatic positioning of the working thickness with gauge TM version with moving heads and fixed table (suitable to be placed in line) Feed speed from 3 to 16 mt / min Working width 1350 mm Abrasive belt length 7400 mm Working height 3 - 160 mm No. 3 working groups: * Adjustable transversal sanding unit with electronic pads T42 ET 150x7400 with 15kW motor with inverter * Adjustable transversal sanding unit with electronic pads T42 ET 150x7400 with 15kW motor with inverter * Panel cleaning group in output Conveyor belt with 3kW motor with inverter Rubber conveyor belt perforated by depression Depressor for conveyor belt

Year of construction: 1999, condition: used, SECOND-HAND TOP AND BOTTOM CALIBRATING AND SANDING MACHINE TAGLIABUE MOD. L 600/11 working width mm. 600 composition: RRB / RRB (bottom: roller roller brush + top: roller roller brush) shoe pressers abrasive belts length 2620 Hfedpfx Asilu Srob Uer vacuum device electrical panel CE rules (year 1999)

Year of construction: 1995, condition: excellent (used), 2 grinding aggregates with 22kW motors each Cleaning brush Smooth feed regulation Vacuum suction of the workpiece Hfjdjhxvi Espfx Ab Ujr Powered receiving roller table

Condition: excellent (used), DMC Topsand 2000 calibrating and sanding machine 4 Belts First group 1 roller Second group 1 roller Third group 1 electronic sectioned pad Fourth group 1 electronic sectioned pad super finisher Useful width 1350 Vacuum system on belt Hfjdpfx Abei Dakrj Ujr

Condition: used, Year of construction: 1998, Brushing machine for elements brand Camam model C/1N/1S serial number 98001 year of construction 1998 branded CE powered 380V 4.5 Kw 13 A ground 530 Kg. complete with declaration of conformity and manual of installation and d. Hfsdpfslagc Sex Ab Uor

Condition: excellent (used), Year of construction: 2020, Micro Vu Excel 502UC Optical Precision Measurement System Scale Resolution 0.1 µm. 'XY' Accuracy 2.8+L/200. 'Z' Accuracy 3.0+L/100. Zoom Ratio (Optical, Digital) 36x (12x, 3x). On-Screen Zoom Range 15x - 540x To 30x - 1080x. Capacity 500 x 400 x 250mm. With 4 Station Probe Rack, Calibration Sphere, Surround Guarding, Joystick Control, Monitor, Keyboard & Mouse. Machine Dimensions L1,200 x W1,100 x H1,650mm. Weight 900kg. S/No.EC502UC01461 (01/2020) Hfsdpfox Ag I Dox Ab Uor

Condition: good (used), Year of construction: 1997, functionality: not functional, machine/vehicle number: TR206 10 1997, total width: 1,100 mm, total height: 150 mm, working width: 1,100 mm, workpiece weight (max.): 150 kg, power: 27.77 kW (37.76 HP), height adjustment type: electric, table width: 1,065 mm, operating pressure: 6 bar, Sandingmaster CSB2 1100m/m wide Roller & Pad Calibrating & Fine Sanding machine. Both 80* Shore hardness Ampmeters on both motors. Feed Motor 2 Speed 7 & 14m/min. Sanding belt dimensions: 1900 x 1130m/m. Weight: Approx 3500kg. Hfedpfx Abjx Hr Dho Usr Complete with Sanding Belts: 80, 100 & 120 grit. Photos on WhatsApp.

Condition: excellent (used), Weiss Type: WKL 64/40 For sale is a professional Weiss climate chamber. Air-cooled -40°C to 180°C with humidity range from 10% to 98% Chamber volume: 64 liters Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1,780 mm, Width 760 mm, Depth 800 mm Temperature change rate: Cooling: 5.0 K/min Heating: 3.5 K/min Temporal temperature fluctuation: ±0.3 K to ±1.0 K Temperature uniformity within chamber: ±0.5 K to ±2.0 K Max. heat compensation: 800 W Climate testing Maximum temperature: +95°C Minimum temperature: +10°C Hjdpfx Abjx Ek Uvs Uefr Dew point temperature range: 5.5 ... 93.5°C Humidity range: 10 ... 95 % r.h. Humidity stability (steady state, depending on set value): ±1 to ±3 % r.h. Temporal temperature deviation (steady state, depending on set value): ±0.3 K to ±0.5 K Temperature uniformity within chamber (depending on set value): ±0.5 K to ±1.5 K Rated power: 1.8 kW; Rated current: 8.0 A Power supply: 1/N/PE AC 230V ±10% / 50Hz Refrigerant: R-404A, 0.8 kg Weight: 120 kg Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following tasks are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Specifications and technical information subject to change and error!) Should you have any further questions, we are happy to assist you by phone.

Year of construction: 2000, condition: used, A used Checkweigher from Garvens - this unit powers up and runs and appears to be working - will probably need to be calibrated - currently it is operating in German Language setting's Ready to ship worldwide Please request more pictures and videos which can be sent via Whats App Export documentation included Hsdsxpg Hgopfx Ab Ujfr

Condition: ready for operation (used), Year of construction: 2016, Main Drive Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 1500 mm Z-Axis Movement 700 mm Additional Equipment Renishaw PH10M Plus head Air Supply: Clean compressed air required Ambient Temperature: Stable temperature (20 °C ±1 °C) required Hfedpfxsx D H Efj Ab Uor This 5-axis LEADER Miracle NC8157 was manufactured in 2016. It features a Renishaw PH10M Plus head and a range of 1500x800x700 mm, fully calibrated for precise measurements. Consider the opportunity to buy this LEADER Miracle NC8157 CMM machine. Contact us for more information. Application Types Measuring

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details grinding length 2000 mm grinding width 850 mm distance spindle center to table 900 mm control Siemens 840 D total power requirement 155 kVA weight of the machine ca. 15 t dimensions of the machine ca. 8815 x 4185 x 2963 mm Additional information CNC Precision Surface and Profile Grinding Machine Technical Specifications: Grinding length 2000 mm Grinding width 850 mm Travel, transverse 750 mm Distance from table to spindle center 900 mm (or 800 mm with intermediate plate) Magnetic plate size 2000 x 700 mm Table load without magnet 3500 kg Table speed 60 m/min. Spindle drive 26 kW Grinding wheel dimensions 500 x 150 x 203.2 mm Grinding wheel peripheral speed 35 m/s Equipment: 3-axis contouring control Siemens 840 D Grinding programs: Full-cut grinding Face grinding Plunge grinding Path grinding X/Y-axis and Y-Z-axis Profile grinding Automatic program sequence with roughing, finishing, fine finishing and spark-out grinding. Multiple plunge grinding for economical production Surface grinding with continuous, continuously programmable cross feed Grinding wheel calibration Plunge/step grinding Face grinding Dressing in the grinding cycle with lift-off amount Fully automatic compensation of dressing amounts Tool management Hfsdpfxox D Tycs Ab Uer AC servo drives with ball screw and absolute measuring system in the X, Y, and Z axes Preloaded precision roller guides in the X, Y, and Z axes with linear guides Portable electronic handwheel Automatic belt filter system Coolant heating Electro-permanent magnetic chuck Fully enclosed Direct measuring system in the vertical axis Temperature-controlled machine bed for consistent accuracy Linear motor in the X-axis, table speed max. 60 m/min. Swiveling control panel Continuous speed control of the grinding spindle Electrical linear measuring device for cross-travel adjustment with zero point setting in any position, resolution 0.001 mm Electro-mechanical locking via position control of the headstock in the cross direction for profile and plunge grinding Mechanical extraction of coolant mist TAG table dresser Pre-profiling dresser VPG 190 Diamond grinding wheel, 190 mm diameter Software program for pre-profiling dresser VPG Rough profiling (roughing) CNC table profile dresser TAD 190 Profile depth max. 45 mm Contour accuracy +/- 0.0025 mm Swivel angle +/- 65 degrees Max. dressing speed 210 mm/min. Diamond wheel for table dressing machine TAD 190 Regrinding package for diamond wheel Intermediate plate for raising the magnet WinWop profiling software Import of CAD profile data SP 60 JOB Listing expansion package Additional holes for the magnet clamping plate to facilitate removal of workpieces using compressed air Ghost shift circuit for shutting down the machine after the end of the program

Condition: used, This listing is for a Sartorius SECURA513-1CEU. The unit is in full working condition and is ready for immediate release. Integrated protection systems for minimizing your risk of obtaining incorrect results Real-time alarm messaging and interactive user guidance for levelling to prevent inaccurate results due to an unleveled balance SQmin for automatic detection and active monitoring to ensure you are within the acceptable USP operating range for reliable results Fully automatic internal adjustment function, isoCAL, for the highest possible accuracy at all times Cal Audit Trail for easy, traceable documentation of all calibration and adjustment data Hjdpjxzg Dvefx Ab Uefr Safe and clear documentation by sample and batch identifiers for keeping perfect track of weighing data GLP-|GMP-compliant printouts Standard password security features for protection against tampering and unauthorized access Integrated PC direct function and Plug & Work connectivity to a Sartorius printer

Condition: excellent (used), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measuring system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. This is a high-quality laboratory or quality measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main unit: Mahr MarSurf CD 120 (Contour Measuring System) CNC contour measuring instrument with vertical axis system Precision measuring module with stylus holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measuring ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probes) Software and Documentation Status MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operation manuals, training folders, training documents Measuring examples, diagrams, technical instructions This software is designed for evaluating contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts Stylus and probe arm sets Precision styluses of various shapes and lengths Replacement needles and mounting tools Stylus holder with protective case Calibration and reference pieces Mahr Contour 2 Block with reference sphere Calibration and parameter data For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/inspection sticker visible (valid until 2026) Typical voltage data for the Mahr MarSurf / MidRange / CT series MarSurf CD 120 (Contour measuring unit / axis drive) Supplied via control unit Hodpfsx A Ur Rsx Ab Usfr Internal usually: 24 V DC External power supply via MidRange control unit Mahr MidRange control unit (MCP-21 / MCP-22 / MCP-23) This device is the central power supply unit. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Also connected to the MidRange system Powered by 24 V DC CT120 / Probe systems Sensors operate at low voltage 5–24 V DC Supplied by the main unit (no separate power supply) Accessories, manual control units, interface boxes Usually 5 V or 24 V DC, depending on module Weight: approx. 65–73 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and specifications!) Further questions can be answered by phone.