Used Calibrating for sale (882)

Condition: excellent (used), Here we offer shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: Temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation temporally in useful chamber center ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -65°C to +70°C Iodpfx Ahji Az Ego Uebf Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Operating hours: 27.903 hrs. Weight: 1000 kg For you as a buyer, the following information for your safety! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: HT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, mileage: 48,811 km, power: 115 kW (156.36 HP), first registration: 02/2019, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 09/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 4 m³, loading space length: 3,800 mm, loading space width: 2,356 mm, loading space height: 400 mm, Year of construction: 2019, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), ATEGO 816 3-Way Tipper with ZAA trailer hitch + ball coupling * HIAB FRONT CRANE X-DUO 078 BS-2 * 5th + 6th hydraulic circuit for grab control * Reach 7.30 m + lifting capacity 860 kg * CRANE UVV valid until 10/2026 Retrofit to radio remote control possible (additional cost net €6,600 +) * Vehicle number for customer inquiries: 4451 * Crane * Engine, Euro VI with OBD-C * Active Brake Assist * Rear axle differential lock * Air conditioning * Center seat with 3-point safety belt * Manual transmission * Lane departure warning system * Standard 3-way tipper, 3800 x 2350 x 400 mm * Environmental badge (green) * Trailer coupling G 135, for ZAA * Ringfeder trailer coupling * Low trailer coupling, ball head up to 3.5 t, D27.1 * Full service history * Electronic Stability Program (ESP) * Trailer brake, two-line * 3-seater * Electronic braking system with ABS and ASR * Driver's air-suspended comfort seat * Electric windows, both sides * Transmission G 71-6/9.20-1.0 * NA MB 60-2c, MPA low, N-speed * Single PTO * Digital tachograph, EC, RPM, ADR * Cruise control * AdBlue tank 25 l * 12V trailer socket, 13-pin, fixed to frame, LED * 24V trailer socket, 15-pin * Body type: tipper/tipping semi-trailer * Roof hatch/roof vent * Rear wall of cab with window * Weight variant 8.6 t (3.8/5.7) * Main mirror, electrically adjustable, driver's side * Heating, electronic air supply unit * Rear suspension, 5.7 t, parabolic * Tipping platform, 4 mm floor * Tipper chassis * Plastic tank 120 l, left side * Meiller pump, 7-piston, type 270/45 * Engine OM934, R4, 5.1 l, 115 kW (156 HP), 650 Nm * Wheelbase 3320 mm * Wheelbase 3620 mm * S-cab ClassicSpace, 2.30 m, tunnel * Heavy duty rear stabilizer * Front suspension 4.0 t, parabolic * Preparation for toll collection * Pre-installation for subsequent loading crane mounting * New Atego model * Side wall height: 400 mm * Maintenance documentation * Control code EBS, 4th generation * Bulkhead height: 700 mm * Lashing recesses in tipper bed * Factory tipper, Meiller No liability for printing or typing errors Sale to commercial customers only Subject to prior sale and errors. Changes, intermediate sale and errors expressly reserved. Description is for vehicle identification and does not constitute a guarantee in the sense of sales law. The purchase contract description is decisive. * TOP SERVICE + QUALITY * We are happy to make you a LEASING-FINANCING-INSTALLMENT PURCHASE offer * Warranty insurance available on request through insurer * TÜV / UVV LBW / tachograph calibration and OBU device installation by our local partners * 30-day export license plates * All export documents possible but must be requested individually * Toll-Collect MAUT can be booked by us Isdpfjx Iaa Hjx Ah Usbf * Free transfer from Stuttgart airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Condition: refurbished (used), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 400 mm, warranty duration: 12 months, total height: 2,300 mm, type of input current: AC, total width: 1,120 mm, total length: 1,540 mm, overall weight: 1,350 kg, input voltage: 230 V, table load: 30 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Factory-reconditioned Mahr Multiscope 664 (Including certified factory acceptance before delivery) Factory-reconditioned premium multisensor measuring center with guarantee and warranty rebuilt 2025. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Ibodpeu Dw S Rofx Ah Ujf Online or optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: Optional complete service: - Delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements! Multisensor measuring device equipped with camera system and Renishaw touch system. Measuring range of all sensors: 600x600x400mm (l x w x h) Dimensions: 1540x1120x2300mm (l x w x h) Space requirement: 1940x1520x2500mm (l x w x h) Weight: approx. 1300kg (including control cabinet and base frame) Max. load weight: glass plate 40kg Accuracy: U1=2.2 + L/150; U2=3.0 + L/125; U3=3.2 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s incl. camera with 2-stage zoom incl. laser incl. LED ring light incl. Renishaw TP200 touch probe system incl. frame grabber (Eagle) incl. Windows 10 incl. new Optichek 3D 5.0 ​​evaluation software Incl. Renishaw TP200 touch probe system The measuring device can be programmed for customer-specific parts during optional commissioning and calibration so that you are immediately able to run your measuring programs before any training that may be necessary.

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI ( L ) 250mm Extended mechanical construction: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, rigidity 9.4 kN/mm Ibodpfx Aeiq Hxveh Uof 1 work area up to nominal load: Working area width: 420 mm max. test stroke without test tools, adapter and KMZ: 1270 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1325mm Travel speeds: Test speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) in accordance with DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is carried out at the installation site at the customer's request, this must be charged separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of traverse position Resolution of the crosshead travel measurement:

Condition: excellent (used), functionality: fully functional, We offer a Keyence stripe light measurement device. Series VL 350, including PC, software, and calibration disc. This allows for stand-alone operation. Strengths: • Contactless measurement: As the system is optical and does not use a mechanical touch probe, it is ideal for measuring delicate or sensitive workpieces with fragile coatings (no deformation caused by a measurement probe). > High accuracy & repeatability: Measurement accuracy of ±10 µm and repeatability of 2 µm make it suitable for a wide range of industrial quality control applications. > Flexible measuring range: Capable of measuring larger components (up to Ø 300 mm × H 200 mm) as well as small detailed parts (Ø 70 mm × H 50 mm) — with easy switching between low and high magnification. > Versatile application: The rotatable and tiltable table enables measurement of various geometries and complex workpieces. Iodpjx Dcg Sofx Ah Uebf The device is suitable for: > Quality control and 3D inspection of parts in manufacturing — for example, workpieces made from plastic or metal > Measurement and reverse engineering of complex geometries where contactless measurement is advantageous > Areas where high precision and repeatability are essential — for evaluating form and positional tolerances > Digitizing components with STL output for subsequent 3D printing. Original packaging is available – courier delivery can be arranged for an additional fee. Transport and loading can be organized throughout Europe at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to get in touch, please visit our website.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Ibsdpfox A Dfmjx Ah Uof

Condition: excellent (used), Here we offer Vötsch shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation in time in the center of the chamber ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -80°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions Width 470 mm Depth 650 mm Height 410 mm External dimensions Width 930 mm Depth 2115 mm Height 1970 mm Feedthrough ∅ 67mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V ±10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: VT 7012 S2 Condition: used / used Scope of delivery: (See picture) Ijden Arc Aepfx Ah Ujbf (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, This listing is for a Sartorius MSA4202S 8.2g-2500g Precision Balance The unit is in full working condition and is ready for immediate release. Modular design (part of the Cubis® series) – the system is built of a weighing module + display/control unit + interface modules, designed for flexible configuration. High-resolution colour TFT display + touchscreen interface, offering an intuitive user interface. Multiple interfaces standard: USB, Ethernet, RS-232, SD card reader for data transfer and traceability. Functions typically include: weighing, density determination, averaging, formulation, percentage-weighing, check-weighing, totalising. Assisted (and optionally motorised) levelling; the system detects inclination and assists the user in levelling the instrument. Automatic internal calibration (isoCAL) for improved stability and lower drift. Isdpfxexuu Hlj Ah Uebf GLP/GMP/traceability ready: audit trail functions, user profiles, etc

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 7345-2203-FA, Equipment: documentation/manual, Romer (Hexagon) Absolute Arm 7345 measuring arm with extensive accessories and Brunson tripod. Last DAkkS calibration in 2022 Ibjdpexpt A Iofx Ah Usf Signs of use are present! Technical specifications and illustrations are non-binding. Subject to change and error. NOTES ON SALE: Inspection is possible at any time by appointment in Sassenburg. In the case of sales to non-EU or EU countries (except Germany), invoicing can be done without VAT if a valid VAT ID is provided. NOTES ON COLLECTION: The item is available immediately. We are happy to assist with loading. Shipping is also generally possible for an additional fee.

Year of construction: 2022, operating hours: 10 h, condition: new, Universal testing machine H5TMC mechanical construction: according to DIN EN ISO 7500-1) 2 backlash-free ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm) max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force measurement: Ibedpfxjiq Hw Uo Ah Uof Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: new, travel distance X-axis: 850 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 48,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 7, workpiece height (max.): 450 mm, workpiece diameter (max.): 750 mm, workpiece weight (max.): 500 kg, rotary table diameter: 630 mm, rotational speed (max.): 12,000 rpm, overall weight: 14,000 kg, coolant supply: 40 bar, spindle motor power: 32 W, spindle nose: SK 40 BIG PLUS (BVD 40), number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Brand new 5-axis simultaneous machining center HEIDENHAIN TNC 7 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) Additional equipment: Renishaw OMP 60 wireless probing system Renishaw NC 4 laser tool control system HEIDENHAIN KKH 125 calibration sphere with KINEMATICS Iodpfxop Nnuto Ah Ujbf Full enclosure Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Only inquiries from Germany will be responded to

Condition: used, Year of construction: 1978, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Iodoxta H Iepfx Ah Usbf Max. working height: 160 mm 1st belt: calibration roller Diameter of 1st roller: 260 mm Type of 1st roller: grooved rubber roller Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1100 mm Abrasive belt speed 1st unit: 25 m/sec Drive unit 1: 20 kW 2nd belt: pad unit Sanding shoe 2nd unit: pneumatic Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1100 mm Abrasive belt speed 2nd unit: 25 m/sec Drive unit 2: 13.5 kW Cleaning brushes: Yes Feed speed: 7 m/min / 14 m/min (selectable) Control: manual control panel Electric/pneumatic belt oscillation: Yes Table lift: electro-motorized Table display: mechanical numerical indicator Operating pressure: 6 bar Machine number: 185 Weight approx.: 2500 kg Dimensions: 1800 x 2000 x 1900 mm Extraction diameter: 2 x 200 mm Location: Nattheim

Condition: excellent (used), Techman Type: Techman Robot TM5-900 The TM5-900 is equipped with a built-in image analysis system, which gives it the ability to "see", so that it can handle assembly automation and inspection tasks with maximum flexibility. It works alongside people and shares the same tasks, without compromising productivity or safety. It offers maximum precision and efficiency while remaining in the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive and food industries. Load capacity 4 kg Iedpfxstym Rzs Ah Ujbf Reach 946 mm Weight 22.6 kg Perfect for Industry 4.0 Maximum flexibility and adaptability extremely low costs for automation and maintenance the TM5-900 is a genuine plug & play solution Connect a monitor, mouse and keyboard to the control unit and the TM5-900 is ready for use in just a few steps. Scope of delivery: Techman TM5-900 robot Control unit, connection cable Control unit 2 calibration plates for the camera system 1 landmark Condition: gebraucht / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: used, This listing is for the Sartorius Tare ENTRIS2201-1S Balance + Tare Printer The unit is in full working condition and is ready for immediate use The Sartorius ENTRIS2201‑1S (also referred to as ENTRIS 2202‑1SUS in some regions) is a precision top-loading laboratory balance designed for reliable, accurate weighing of samples up to approximately 2,200 g with 0.01 g readability. Key Specifications: Capacity: 2,200 g Readability (Resolution): 0.01 g (10 mg) Ibjdsxui S Aepfx Ah Uof Repeatability: Typically 0.01 g Linearity: Approximately 0.03 g Weighing Pan Size: Around 182 mm × 182 mm (7.1″ × 7.1″) Calibration Type: External calibration (requires separate calibration weight) Display: Backlit, high-contrast screen for clear visibility Interface Options: RS‑232 port for communication with PCs or printers Built-In Functions: Includes modes for basic weighing, counting, percent weighing, animal weighing, and density determination Language Support: Multiple languages supported such as English, French, German, Italian, Polish, Russian, Spanish Other Features: Anti-theft locking capability, easy-to-clean removable pan and draft shield Stabilization Time: Approximately 1.5 seconds Dimensions & Build: Compact size, robust design ideal for lab environments

Condition: good (used), Year of construction: 2022, Equipment: type plate available, Technical Data - KEYENCE WM 3000 Additional Equipment - Measuring head WM 3000 - USB cable - Power supply - Measuring probe WMP3000 - Probe tip Ø 5 mm - Calibration device Ibsdpfxow Sviqe Ah Usf - Tripod - 3D-CAD additional software - Transport case - 4x batteries for measuring probe

Year of construction: 2023, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, Universal testing machine H5TMCI 250mm Extended mechanical structure: 2 backlash-free recirculating ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm) max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Ibsdpfx Ahsmdpafj Ujf Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: used, Slabs finishing line composed by loading, trimming, back calibration, front calibration, 2 Xolar polishing machines, selection, unloading. Isdpfsx An Ilsx Ah Uebf Including supply of new transverse and longitudinal trimming machine.

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” Ibsdpfxecr U Urs Ah Usf SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: used, Vötsch Model: VC 0018 Air-cooled climate test chamber Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm Housing dimensions: Width 865 x Depth 1150 x Height 1780 mm Test chamber volume: approx. 190 liters Performance data for temperature tests: Temperature range: -10 °C to +90 °C Temperature deviation in steady-state, according to IEC 60068-3-5, dependent on test chamber temperature time-wise ±0.1 to ±0.5 K spatially ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 0.6 K/min. Cooling: 0.3 K/min. Heat compensation in the range +20 °C to +50 °C: 200 W Calibration values: +4 °C and +90 °C Performance data for climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation in steady-state, according to IEC 60068-3-5, dependent on test chamber temperature time-wise ±0.1 to ±0.3 K spatially ±0.5 to ±1.0 K Humidity range: 10% to 98% r.h. Electrical connection: Rated voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 1.7 kW Rated current: 9.5 A (Neutral conductor plug: loaded) Schuko approx. connection cable: 3.5 m Iedpfx Aew Swrtsh Uobf Fuse protection: 16 A slow-blow, provided by the customer Weight: approx. 380 kg net Refrigerant: R-134A Buyer Information for Your Safety! The following procedures are carried out on our climate chambers prior to sale: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) Technical specifications and information subject to change and errors! Feel free to call us with any further questions.

Condition: used, Year of construction: 2019, x-travel 800 mm y-travel 1020 mm z-travel 970 mm Control TNC640 B - axis 360 x 0,001 ° Isdpfx Ahoxn Amao Usbf feed B-axis max. 50,00 U/min A - axis -185 / +45 x 0,001 ° feed A-axis max. 25,00 U/min feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206,00 / 159,00 Nm spindle diameter in front bearing 80 mm tool taper HSK-A63 tool magazin: 70 tool length - max. 500 mm tool diameter 118 mm tool diameter with 2 vacant positions 260 mm tool total weight 22,00 kg Chip to chip time 4,2 sec. size of pallet Ø 770 mm workpiece weight 800 kg interference diameter 900 mm total power requirement 35,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 7,00 x 3,50 x H3,50 m 5-axis machining center with Heidenhain TNC640 control, integrated KNOLL coolant system KF220, coolant high-pressure 23bar, coolant through the spindle, chip conveyor, measuring probe Heidenhain TS640, electromechanical tool length check, Swivel axis calibration GSC, collision monitoring "DCM Collision", BLUM-Laser, GROB Spindle-diagnosis (GSD), kinematics-set.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: S2930815010072, travel distance X-axis: 450 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 665 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 12,000 rpm, operating hours of spindle: 349 h, coolant supply: 40 bar, number of slots in tool magazine: 117, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Automation PSS-T300 - 117 tools in the magazine - IKZ 40 bar Basic machine G150 Travel path of the X-axis 450 mm Travel path of the Y'-axis 670 mm Travel path of the Z-axis 665 mm Power supply system 400 V, 50 Hz, TN-S Compressed air system, with pressure booster, operating pressure 5 and 9 bar, pressure vessel volume 10 l Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³, filter class ISO ePM1 80% Machine cooling system GCU (24 kW) with air-cooled cooling unit Modified door at machine column in case of integration of an automation system Machine control system HEIDENHAIN TNC7 with GROB⁴Pilot generation 2 Swivel axis calibration GSC Advanced Interface for connection of an automation system - standard interface version 1.7 (GROB) Control panel to enter tool data at tool loading and unloading position (HEIDENHAIN) Collision monitoring DCM Collision, version 1 (HEIDENHAIN) Rotary table with EROWA MTS pallet clamping system (B-axis) Motorized spindle HSK-A 63, 12,000 rpm, 64/83 Nm, 40/52 kW GROB spindle diagnostics GSD Triple disk-type tool magazine HSK-A 63 with 117 tool pockets Tool cleaning device Electromechanical tool breakage detection device Ibsdpfxsx Ex Rxj Ah Uef Laser measurement system LaserControl NT LC50-DIGILOG for milling tools, BLUM-NOVOTEST Pallet storage tower system PSS-T300, basic module Host computer software PROCAM EMS light 10 xEROWA pallet, MTS 320 x 320 x 48 mm / STM 160, T-Slot 3 x Pallet ITS ø148 G (EROWA) 3 x EROWA pallet ø 148 P for part clamp EROWA adapter pallet MTS - ITS (STM160) High-pressure cutting fluid system (10-40 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Changeable cutting fluid pressure increase for the motorspindle nozzles Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flushing unit for the base of the work area Flushing unit (Z-axis) Part clamping system in work area, customer-specific - Compressed air, manual pressure regulation, 0.5-5 bar (P8.1) - Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Machine status light, 3-colored Machine accuracy package 1 Radio touch probe RMP400 (RENISHAW) 12-month warranty

Year of construction: 2024, condition: new, Universal testing machine H50TMCI / 900 Watt mechanical construction: according to DIN EN ISO 7500-1) 2 backlash-free ball screws, drive via AC servo motor, Fmax = 50 kN, stiffness 65 kN/mm 1 working area up to nominal load: working area width: 510 mm (optional widening: +240mm / +530mm) max. test stroke without test tools, adapter and KMZ: 1095 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 800 mm/min at full load Return speed 800 mm/min Iodpfx Asiq Hxcsh Uebf Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: excellent (used), Weiss temperature chamber Here we offer Weiss temperature chamber. Iedpfx Aheic Rgfs Ujbf Converted to R452a Weiss temperature chamber air cooled Temperature range: from - 30°C to 180°C Temperature change rate cooling 1,6 K/min Temperature change rate heating 2,1 K/min Test chamber dimensions: Width 550 mm x depth 750 mm x height 800 mm Housing dimensions: Width 800 mm x depth 1500 mm x heights 1800 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4,9 kW Rated current 9 A Refrigerant: R452a Weight: 515 kg Type: WT1-340/30 For you as a buyer the following information for safety! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: S2749544010016, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK ONE, rotational speed (max.): 16,000 rpm, number of slots in tool magazine: 167, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Rotary pallet storage system PSS-R1800 with 10 storage locations - 167 tools in system _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector: 1,000 m³, filter class ISO ePM1 80% Machine cooling system with air-cooled cooling unit dynamic package Electrical cabinet lighting Machine control system SINUMERIK ONE with machine control GROB⁴Pilot gen. 2 Swivel axis calibration GSC for 4-axis machining centers Program for creation of an automatic clamping sequence Time-controlled start of warm-up program - programmable at the HMI EES function to realize CN program on an external data carrier (SIEMENS) Technology package SINUMERIK MDynamics - milling (SIEMENS) Control panel to enter tool data at tool loading and unloading position Pallet guide element at rotary table Extension of B-axis' radius of action Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Triple disk-type tool magazine HSK-A 63 with 167 (47+10|50|60) tool pockets Tool cleaning device Tool coding, system BIS-M Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Setup station door for manual loading and unloading and automatic load and unload systems Rotary pallet storage system PSS-R1800 with 10 storage locations Air gun at setup station Cutting fluid return from pallet storage system PSS to machining center Lighting in the setup station of the PSS pallet storage system Clamping program editor for setup station of PSS-R450-1800 Support EES-call PSS-R450-1800 Support GSC swivel axis calibration PSS-R450-1800 NC program management system by the primary control PSS-R450-1800 Tool requirement planning PSS-R450-1800 5x Pallet 500 x 630 mm, T-slots Pallet equipped with 6 fluid connections High-pressure cutting fluid system (5-40 bar, IKZ) Cooling fluid system Premium - system description Premium flushing package Part clamping system in work area, customer-specific Part clamping system in setup station of pallet storage system PSS, customer-specific Part clamping system in setup station of pallet changer, customer-specific Ibodjwz Eddopfx Ah Ujf Rotating inspection glass for work area door Infrared probe OMP60 (RENISHAW) Remote machine diagnostics with access control switch 12-month warranty

Year of construction: 2024, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Iedsmdn Tropfx Ah Uebf Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement: