Used Camlock for sale (155)

Condition: new, New lathe with large spindle bore. Brand : KMS Type : CS6250C TDC : 1000mm Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. Nedpehhm Edsfx Afwelf - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: ready for operation (used), Outer Ø: 125 mm Nlsdpfohq Tzgox Afwsf Bore: 32 mm Short taper Camlock size 1-4"

Condition: ready for operation (used), Outer Ø: 130 mm Bore: 25 mm Nsdpfx Aohq Ty Uofwslf Short taper Camlock size D1-4"

Condition: new, Precision full gear, lead, pull, switching spindle Lathe, bed and gear wheels hardened and ground. Main spindle, tapered roller bearings and V-ledges, face/top slide adjustable. Camlock mount C5, top slide rotatable 360°. Tailstock adjustment +/- 5 mm for taper turning, High cutting performance, DIN acceptance protocol, Operating and spare parts list. Without oil filling. Nledpfx Afsvrv Enowef Standard equipment: 3-axis digital display. Base frame Foot brake Coolant system Halogen lamp 3-jaw American chuck 200 mm 4-jaw American chuck 200 mm Faceplate 250 mm 2 steady rests Technical data: Center height 180 mm Center width 1000 mm Max. turning diameter 506 mm Spindle bore 51 mm Tailstock taper MK 4 Spindle taper MK 6 Spindle speed 70 to 2000 rpm Speeds 8 Main motor output 2 kW S6 (1.5 kW S1) Weight 600 kg

Condition: new, TC 205 x 1000 Center height: 205 mm Swing over bed: 410 mm Distance between centers: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, Size 6 Cross slide travel: 220 mm Top slide travel: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Continuously variable Mechanical pre-selection stages: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feed Z: 0.05 - 1.7 mm/rev Cross feed X: 0.025 - 0.85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametral threads: (21) 8 - 44 DP Module threads: (18) 0.3 - 3.5 MP Tailstock diameter: 52 mm Tailstock quill: MK 4 Tailstock travel: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Tool machine accuracy according to DIN 8605 - Continuously variable speed control (2 pre-selection stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guides - Monolithic cast iron base - Adjustable precision tapered roller bearings in the main spindle - Easy-to-operate feed gear with a large feed range, running in a closed oil bath. - Low-maintenance central lubrication - Removable bridge Scope of supply: - 3-axis digital display (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool holder with four cassettes - High splash guard and integrated LED work light - Chip tray that can be extended forward Nodpjir If Djfx Afwslf - Slip clutch - Fixed steady rest with ball bearing inserts - Traveling steady rest - Micrometer bed stop - Machine feet (1 set of 6 pieces) - Two emergency stop push buttons - Foot pedal with double braking system (mechanical and electrical) - End-switch protected chuck guard, tool holder guard and cover for the lead screw and ball screw in accordance with European safety standards CE - Coolant system - 2 fixed centering points - Reduction sleeve for main spindle - Operating tool - Operating tool in a tool box - Operating manual with parts list

Condition: new, TC 165 x 750V Illustration shows MIOTAL® TC 180 x 1000 Center distance: 750 mm Center height: 165 mm Swinging diameter over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Nledeir Igwjpfx Afwsf Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2000 rpm Mechanical feed stages: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Cross feeds X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral threads: (32) 7.5 - 112 Tailstock spindle diameter: Ø 40 mm Tailstock spindle taper: MK 3 Tailstock quill travel: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance test report according to DIN - Precise, hardened, and ground guides - Robust headstock with oil circulation lubrication, precision-bearing spindle, gears hardened and ground for lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality cast iron, stress-relieved by annealing and with multiple ribs for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed drive - Pulse button for main spindle - CE / IEC as well as German documentation and German service Standard equipment (standard accessories): - Machine stand with splash guard - 3-jaw chuck - 4-way tool holder - Foot pedal with mechanical braking device - Coolant system - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center for main spindle - 1 Fixed center MK3 - 1 Test report - Safety devices and electrical equipment in accordance with CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Quick-change tool holder system Multifix Also available as a geared version.

Condition: new, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length Nlsdewgbuiepfx Afwjf - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: new, Made in Italy Machine manufactured according to DIN 8606 Maximum turning height: 260 mm Turning diameter over bed: 520 mm Turning diameter over slide: 300 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (Option 11 - 2000 rpm) Nlodpfedvm Eujx Afwsf Motor power: 5.5 kW (Option: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide, WxL: 650 x 230 mm Cross slide travel: 340 mm Top slide, WxL: 350 x 150 mm Top slide travel: 150 mm Tailstock spindle diameter: 85 mm Tailstock spindle travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,100 kg Equipment: - Tailstock movement with pneumatic assistance - Acceptance test report according to DIN 8605, lathe with increased accuracy - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g. Siemens/Schneider - Lubrication of guide rails via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: Chuck guard with plexiglass pane, secured with microswitches. Tool holder guard with plexiglass pane. Rear splash guard over the entire length. Lead screw and feed screw protection by means of a light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip tray on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to the latest CE standard

Condition: used, Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 320 mm -Take: Camlock short taper 6 -Hole circle: Ø 133 mm -Through hole: Ø 95 mm Njdpfx Asgqylxjfwslf -Weight: 40 kg

Condition: new, The new Hans Schreiner stepless metal lathe with lead and feed spindle and face feed. Bed and gears hardened and ground. Main spindle, tapered roller bearings and wedge strips. Camlock mount C4, top slide rotatable 360°. Tailstock adjustment +/- 5 mm for taper turning, good cutting performance. Speed continuously adjustable using electronic speed control with digital speed display. Incl. three-bank chuck 160 mm and steady rest. The 2-axis digital display guarantees the highest precision when turning. Technical data: Centre height 140 mm Centre width 650 mm Max. turning diameter 280 mm Spindle bore 38 mm Spindle cone MK 5 Tailstock taper MK 3 Spindle speed 75 - 500 rpm and 300 to 2000 rpm Speeds 2 Main motor power 1.5 kW S6 Voltage 230 volts Nsdpfsvrv D Dsx Afwjlf Weight 210 kg Standard equipment: 3-jaw American chuck 160 mm with interchangeable jaws for internal turning Centering point 2-axis digital display Optional equipment: Base frame with drawer

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm Nledpfx Aoxuflfofwof -Weight: 9.5 kg

Condition: new, The new Hans Schreiner stepless metal lathe with lead and feed spindle and face feed. Bed and gears hardened and ground. Main spindle, tapered roller bearings and V-ledges. Camlock mount C4, top slide rotatable 360°. Tailstock adjustment +/- 5 mm for taper turning, Good cutting performance. Speed continuously adjustable using electronic speed control with digital speed display. Incl. three-jaw chuck 160 mm and steady rest. Technical data: Centre height 140 mm Centre width 650 mm Max. turning diameter 280 mm Spindle bore 38 mm Spindle cone MK 5 Tailstock taper MK 3 Spindle speed 75 - 500 rpm and 300 to 2000 rpm Speeds 2 Main motor power 1.5 kW S6 Nsdpevrv Dwefx Afwolf Voltage 230 volts Weight 210 kg Standard equipment: 3-jaw American chuck 160 mm with interchangeable jaws for internal turning Centering point Optional equipment: 2-axis digital display Base frame with loading Milling attachment for milling

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck type DURO-S chuck size Ø 160 mm -Passage: Ø 42 mm Nedsv Tlryjpfx Afwslf -Bolt circle: Ø 83 mm -Mounting: Short taper 4 / cone 56 - 62 mm short taper flange with Camlock fastening -Dimensions: Ø160 x 115 mm -Total weight: 9.6 kg

Condition: used, machine/vehicle number: 1457, Outer diameter: 205 mm Height: 59 mm Camlock fitting according to DIN 55029: Size 3 Njdpfx Asb Nxhmefwjlf

Condition: new, functionality: fully functional, turning diameter over cross slide: 438 mm, spindle bore: 85 mm, turning diameter over bed slide: 660 mm, center height: 330 mm, turning length: 1,500 mm, quill stroke: 165 mm, quill diameter: 85 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, bed width: 400 mm, quill mount: MK 5, Equipment: rotational speed infinitely variable, Tip height: 330 mm Center distance: 1500 mm Spindle bore: 85 mm Spindle nose according to DIN 55029: Camlock D8 Njdom E Umijpfx Afwjlf Gear stages: 12 Spindle speed range: 15-1500 rpm Drive power: 11 kW Weight approx. 2135 kg Features and more: Each gear stage is infinitely variable from 50% to 100% Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm Nodpfxot Sz Eve Afwjlf -Weight: 19 kg

Condition: new, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 7.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Nodpfx Afeu T E Ehjwelf Machine light Fixed center point Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 7.5 kW Spindle speed range: 20-2000 mm Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Nledeu T Hiuepfx Afwof Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, faceplate diameter 510 mm max. pitch circle 171,4 mm Njdpsfu Tr Ijfx Afwolf camlock Gr. 8

Condition: new, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Maximum height: 215 mm Distance between centers: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029, Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 rpm Weight approx. 1680 kg Njdpfscir Anox Afwelf Features include: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication system with one pump for the longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Gearshift lever with 3 adjustable cams Machine light Fixed center Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Maximum height: 235 mm Distance between centers: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 rpm Features include: Hardened and precision-ground Z-axis guide rails Turcite coatings (on the mating surface) of the tool and cross slides Njdpfjcirnisx Afwjlf Manual central lubrication system with one pump for the longitudinal and cross slides Complete coolant system with a rear splash guard and a splash guard on the slide Chuck guard Selector lever with 3 adjustable cams Machine light Fixed center Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,160 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,810 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Maximum turning height: 260 mm Distance between centers: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029, Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Features include: Nodpfxjh Rvxho Afwslf Hardened and precision-ground Z-axis guide rails Turcite coatings (on the mating surface) of the tool and cross slides Manual central lubrication with one pump for the longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Gear lever with 3 adjustable cams Machine light Fixed centering point Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,500 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,670 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 2,135 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Maximum height: 260 mm Distance between centers: 1500 mm Spindle bore: 78 mm Spindle nose according to DIN 55029, Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Equipment includes: Rapid traverse in the Z-axis Hardened and precision-ground guide rails for the Z-axis Turcite coatings (on the mating surface) of the tool and cross slides Nlsdpfxjctutme Afwjf Manual central lubrication with one pump for the longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Gear lever with 3 adjustable cams Machine light Fixed centering point Set of machine mounting plates

Condition: good (used), Faceplate, faceplate chuck -Mouth size: Ø 500 mm Nlsdpfsdu Ufmex Afwsf -Camlock: Short taper flange, taper size 11, bolt circle Ø 235 mm -Weight: 67 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 230 mm Nlsdpfod Hcrhsx Afwef -Camlock mount: DIN 55029 -Cone size: 6 -Hole circle: Ø 6 x 133.4 mm -Weight: 10 kg