Used Camlock for sale (134)

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 230 mm Pedpjd Hcrhofx Abgspu -Camlock mount: DIN 55029 -Cone size: 6 -Hole circle: Ø 6 x 133.4 mm -Weight: 10 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 500 mm -without: Baking -Camlock mount: Ø 196 mm short taper 11 Ppjdpfx Abeb A Sbpogsu -Bolt circle: Ø 204 mm -Weight: 80 kg

Condition: new, New lathe with large spindle bore. Brand : KMS Type : CS6250C TDC : 1000mm Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Ppsdpfx Abohhm Edegsu Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: new, spindle bore: 105 mm, turning diameter: 500 mm, turning diameter over bed slide: 300 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, type of input current: three-phase, overall weight: 2,600 kg, three-jaw chuck diameter: 315 mm, New lathe with large bore. Brand: KMS Type: CS6250C TDC: 1500 mm Turning diameter over bed: Ø 500 mm Turning diameter over slide: Ø 300 mm Turning diameter in pocket: Ø 710 mm Turning length in pocket: 240 mm Bed width: 390 mm Spindle passage: Ø 105 mm Spindle speeds: 12 (36 - 1600 rpm) Tailstock spindle diameter: 75 mm Tailstock range: 150 mm Tailstock mounting: MC5 Machine dimensions: ± 3132 x 975 x 1270 mm (L x W x H) Machine weight: ± 2600 kg Machine equipped with: - Longitudinal and cross feed. - Rapid traverse on longitudinal and cross feed. - Adjustable and movable stops for automatic longitudinal feed. - Thread cutting axis (cutting of Metric/Inch/Module/DP thread possible. - Quick-change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, passage 100 mm (Camlock). Psdjvxz R Nspfx Abgepu - 4-jaw chuck Ø 400, passage 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Fixed steady rest Ø 120- Ø 260 mm. - Follow steady rest Ø 20 – Ø80 mm. - Coolant device.

Year of construction: 1975, condition: ready for operation (used), Offered is a precision lead and feed screw lathe: Center distance: approx. 1000mm, center height: 180mm, swing diameter over bed: 360mm, spindle bore: 35mm, spindle mount: D1-3 Camlock, spindle taper: MK5 (MT5), speed steps: 12 speeds, speed range: approx. 40-1800rpm, longitudinal feeds: 0.05-0.7mm/rev, cross feeds: 0.02-0.4mm/rev, metric threads: 0.4-7.0mm, inch threads (Whitworth): 4-56threads/inch. Inspection possible by appointment. Ppedpfx Aoyzr Hxjbgeu

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 52 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, spindle motor power: 2,200 W, total height: 1,650 mm, total length: 1,900 mm, total width: 830 mm, type of input current: three-phase, overall weight: 790 kg, Universal Lathe TORNADO 400 × 1000 – 2.2 kW / 400 V With Digital Readout and Work Light Key Features Precision spindle roller bearings The spindle is equipped with high-precision roller bearings that ensure excellent machining accuracy and reliable operation even during intensive use. High-quality hardened and ground steel gears in the headstock transmission All gears inside the headstock are made from high-grade steel, hardened and ground to ensure smooth, quiet operation and long service life. Easy and quick gearbox operation The intuitive gearbox design allows quick and convenient speed changes and easy adjustment of machining parameters. Powerful drive motor The machine is equipped with a sufficiently powerful motor that ensures stable performance even under heavy loads. D1-5 spindle mounting system The D1-5 camlock spindle system allows quick and secure installation of chucks and other accessories. Wide range of thread cutting capabilities The machine enables cutting of various thread types (metric, inch, module, and others), making it a versatile tool for many applications. Technical Specifications 🔩 Turning Capacity Maximum swing over bed: 400 mm Swing over cross slide: 250 mm Swing in gap: 520 mm Distance between centers: 1000 mm Maximum workpiece length (chuck + tailstock): ~920 mm 🛠️ Slides and Travels Compound slide travel: 125 mm (0.02 mm accuracy) Cross slide travel: 240 mm (0.04 mm accuracy) Longitudinal travel: 750 mm (0.2 mm) ⛓️ Drive and Speeds Main motor power: 2.2 kW / 400 V Coolant pump power: approx. 40 W Spindle speeds: 18 ranges (I/II) 65 – 1810 rpm 🧰 Threads and Feeds Metric threads: 0.4 – 7 mm Inch threads: 4 – 60 T.P.I. Module threads: 0.4 – 3 mm D.P. threads: 8 – 84 D.P. Longitudinal feed range: ~0.053 – 1.291 mm/rev Cross feed range: ~0.011 – 0.276 mm/rev Pedpfx Abeyr Ihlegjpu 🧱 Construction and Spindle Bed width: 218 mm Spindle bore: 52 mm Spindle taper: MT6 Spindle nose: D1-5 CAMLOCK Tailstock: Quill diameter: 50 mm Quill travel: 110 mm Taper: MT4 📏 Dimensions and Weight Machine dimensions (L × W × H): approx. 1900 × 830 × 1650 mm Weight: approx. 640 – 790 kg (depending on configuration) Standard Equipment 2-axis digital readout (optical scales) 3-jaw chuck 200 mm + internal jaws set 4-jaw chuck 200 mm Faceplate 280 mm Steady rest Follow rest Dead centers MT4 – 2 pcs. Spindle reduction sleeve MT6 / MT4 Change gears set Coolant system Working light Lubrication pump Chuck key and toolpost wrench Set of service tools Safety guards compliant with CE standards Operating manual (English) CE Declaration of Conformity Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop Psdpsymznhefx Abgjpu >> Machine feet >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: excellent (used), For sale is a Schaublin 125 precision lathe in exceptionally good condition with extensive accessories. The machine was never used in production and shows barely any noticeable wear. Radial and axial runout at the spindle nose is less than 0.001mm. In terms of condition, this machine is almost as new. Naturally, the machine is fully functional and has been thoroughly checked. The brake and the feed control board were recently replaced. This is a rare opportunity to acquire one of the most precise conventional lathes in outstanding condition. TECHNICAL DATA: Ppedpey Hnucofx Abgeu - Centre height: 125 mm - Centre distance: 500 mm - Maximum workpiece diameter over bed: 270 mm - Maximum workpiece diameter over cross slide: 120 mm - Infinitely variable spindle speeds: 225–3000 rpm - Spindle nose: Camlock D1-3 - Spindle bore: 32 mm - Collets: Schaublin B32 - Collet pass-through: 24 mm - Chuck pass-through: 28 mm - Bed travel: 440 mm - Carriage travel: 90 mm - Cross slide travel: 130 mm - Tailstock quill taper: Morse 2 - Tailstock quill travel: 100 mm - Automatic feeds, longitudinal & cross: 4–260 mm/min, stepless Weight approx. 950 kg Accessories: - Röhm 160 mm 3-jaw chuck - Reishauer 160 mm 4-jaw independent chuck - 160 mm 4-jaw self-centering chuck - 6x Multifix tool holders - Change gears for thread cutting - B32 collet set from 1 to 24 mm with draw tube - Machine mounts - Complete documentation including original brochure

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swing diameter over cross slide 270 mm Ppedoy Duy Hjpfx Abgsu Swing diameter in bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle head CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kgs Machine dimensions: 2700 x 1080 x 1370 mm Accessories - 3-axis DRO system - 3-jaw chuck - 4-jaw independent chuck - Faceplate - Steady rest - Traveling rest - Wrenches - Cooling water equipment - MULTIFIX knife holder with inserts - Tool case - Tools, wrenches - Cutting tools - Manuals and CD The lathe is in near-new condition and has hardly been used. It is powered up in our workshop.

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with 3-Axis K&C Digital Readout NEW and Accessory Cabinet in Excellent Ex-University Condition! Technical Data: >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle mount: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric thread pitches: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable speed range: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout by K&C (new), 12 months manufacturer’s warranty with user manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> Accessory cabinet containing: - 160 mm 3-jaw chuck with two sets of jaws - Multifix B toolholder with 3 pockets - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steady rests - Coolant system Pedpfxox H Szye Abgspu - Centres - Operating manual - And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university and only lightly used. Equipped with a NEW K&C 3-axis digital readout and a comprehensive range of accessories. You are invited to inspect the machine under power on site to verify its condition.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Podpfsxcuazox Abgjpu Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 1987, Schaublin 125 C precision lathe Year: 1987 Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Psdpfey Avyxsx Abgjpu Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg Accessories/options: tool holders Röhm chuck 125mm documentations

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, filter area: 0.283 m², Nutsche Pressure Filter Vacuum Filter Pressure Nutsche Year of manufacture: 2009 Condition: Used Availability: In stock Documentation: Complete set available Model designation: Pressure Filter Nutsche Vacuum Filter Suction Filter, 62 litre capacity Operational: Yes Filter area: 0.283 m² Material: Stainless steel 1.4404 Total heating/cooling chamber volume (L): 10 Weight (kg): 204 Total vessel capacity (L): 62 Permissible operating temperature vessel (°C): -20/+150 Ppsdpfsxxxqvjx Abgeu Permissible operating pressure vessel (bar): -1/+6 Permissible operating pressure heating (bar): -1/+6 Permissible operating temperature heating (°C): -20/+150 Design overpressure (bar): 11.5 Support structure: Standing on feet Heating material: 1.4404 Country of manufacture: Switzerland Accessories & fittings: Manometer, safety relief valve, sight glass, ball valve, Camlock coupling, lid opening aid

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, filter area: 0.283 m², Nutsche pressure filter, suction nutsche, vacuum filter, stainless steel, Halar® coated Year of manufacture: 2009 Condition: Used Availability: In stock Documentation: Fully available Description/Type: Halar® pressure filter, nutsche, vacuum filter, suction filter, 62 liter capacity Ppjdpfxsxx Sy Ds Abgeu Operational: Yes Filter area: 0.283 m² Material: Stainless steel 1.4404, interior Halar® coated Total heating/cooling jacket volume (L): 10 Weight (kg): 230 Total vessel volume (L): 62 Permissible operating temperature vessel (°C): -20/+150 Permissible operating pressure vessel (bar): -1/+6 Permissible heating pressure (bar): -1/+6 Permissible heating temperature (°C): -20/+150 Design overpressure (bar): 11.5 Support structure: Upright on legs Heating material: Stainless steel 1.4404 Country of manufacture: Switzerland Accessories & fittings: Pressure gauge, safety valve, sight glass, ball valve, Camlock coupling

Condition: used, Year of construction: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH Signs of use present • Hardened and ground Z-axis guideway • Spindle mount: Camlock DIN ISO 702-2 No. 8 • Precisely machined carriage • Handwheels with adjustable fine graduation 0.04 / 0.02 mm • All guides adjustable via gib strips • Shafts, gears, and main spindle running in oil bath • Compound slide adjustment range ± 90° • Guaranteed spindle nose runout accuracy better than 0.015 mm • Gear wheels move smoothly, hardened and ground, mounted with 2 adjustable precision tapered roller bearings • Clearly arranged selector levers for feed speed selection • Enclosed rapid-shift feed gearbox design • Gears and shafts hardened and ground, running in oil bath on precision bearings • Switches with lifecycle calculation, tested according to EN ISO 13849 • Bed carriage with reversible operation via shift spindle • Centralized lubrication on bed carriage • Leadscrew cover • Emergency stop pushbutton, motor protection switch, lockable main switch • Tailstock quill and handwheel with adjustable fine graduation 0.025 mm • Fast, simple, tool-free adjustment via clamping lever • Heavily ribbed prism bed, inductively hardened and precision-ground from cast iron • Coolant system with separate coolant tank, fill level indicator and oil separator; easy and complete draining and cleaning according to DIN • LED machine lamp in chip guard • Two gearbox stages • Spindle bore / bar capacity Ø 105 mm • Siemens Sinamics frequency converter / Safety Integrated • Drag chain for gentle routing of cables and hoses • Thread dial gauge scale adjustable • Quick-change toolholder SWH 7-C • 1 toolholder 32 x 150 Type D for 25 mm square tool bits • Digital position display DPA 21 • Glass scales Dimensions and Weight Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Range Centre height: 280 mm Centre distance: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total power rating: 8.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System Coolant pump capacity: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. toolholder seat height: 25 mm Spindle taper: Ø 113 (Taper 1:20) mm Metric thread pitches: 0.1–14 mm/rev Number of metric threads: 47 Imperial thread pitches: 112–2 TPI Number of imperial threads: 60 Diametral pitch: 4–112 DPI Number of diametral pitch threads: 50 Ppedpex Dzxaefx Abgju Module threads: 0.1–7 mm/rev Number of module threads: 34 Compound slide travel: 130 mm Cross slide travel: 316 mm Bed carriage travel: 1710 mm Longitudinal feed range: 0.031–1.7 mm/rev Number of longitudinal feeds: 42 Face feed range: 0.014–0.784 mm/rev Number of face feeds: 42

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools Podpfx Asx Hdq Tjbgepu - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Condition: excellent (used), Center height 125 mm Pedpfotzxh Tjx Abgspu Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Condition: new, Machine according to DIN 8605: Lathe with increased accuracy. Distance between centers: 700 mm Distance between centers: 170 mm Swinging diameter over bed: Ø 340 mm Swinging diameter over carriage: Ø 190 mm Bed width: 260 mm Travel of longitudinal slide: 600 mm Travel of cross slide: 220 mm Travel of top slide: 110 mm Carriage length: 410 mm Carriage width: 150 mm Guide length of bed carriage: 380 mm Lathe tool shank cross-section: 20x20 mm Distance from lathe center to top slide: 34 mm Swiveling range of top slide (rest): 60/120° Main spindle: Spindle mount DIN 55029 (camlock): S 5 Spindle bore: Ø 50 mm Internal taper according to DIN 7178: 1:22 Spindle diameter in the front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40-3000 RPM Speed control: Stepless Mechanical speed steps: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Threads: 20 (28) metric threads (standard equipment): 0.4 - 7.0 mm Podpfx Abedctnbogepu 32 inch threads (with optional gear set D3Z200): 56 - 4 TPI 28 module threads (with optional gear set D3Z200): 0.2 - 3.5 32 diametral pitch threads (with optional gear set D3Z200): 112 - 8 Tailstock: Arbor diameter: Ø 50 mm Internal taper of arbor: MK 3 Arbor travel: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weights Suspended: 50 kg Supported by tailstock: 150 kg Further standard equipment (standard accessories): Includes machine stand and integrated 3-axis digital display, German language, with color display 1 length stop 1 center, taper 1:22, DIN 7178 1 center MK3 1 chuck key 1 key part 1 grease gun 3 hexagon head screws M16x60 - DIN 933 3 hexagon nuts M16-8 DIN 934 1 simple tool holder 1 key A13x17 DIN 837 1 open-end wrench SW 19 1 open-end wrench SW 22 1 hexagon screwdriver SW 5 1 hexagon screwdriver SW 6 1 hexagon screwdriver SW 8 3 shear pins 1 box wrench 1 operating manual incl. parts list 1 electrical documentation 1 test report Packaging (for truck transport with pallet and plastic cover) Machine according to CE Note: Illustrations show special equipment / accessories, among other things!

Condition: new, Year of construction: 2026, Universal Lathe GOLIAT 800 x 3000 (CJ6280QC/3000) Solid cast iron bed construction ensures maximum vibration reduction. Additionally, the bed is hardened and precision-ground. It is highly resistant to torsion and does not vibrate, meeting the basic requirement for accurate turning. Centralized feed control system, lead screw, and feed rod for threading. Digital readout operates in three axes: longitudinal, cross, and compound slide. Processed electronic signals from optical scales display measured movement values on a digital screen. The lathe is equipped with a high-quality, reinforced spindle bearing system. Modern spindle support with ball bearings. Optimal performance is ensured by a large spindle bore of 105 mm, 3000 mm between centers, a 315 mm 3-jaw chuck, 500 mm bed width, and a powerful 7.5 kW motor. Ppsdpfjy H Emiex Abgeu Rapid longitudinal and cross feed system significantly reduces machining time and increases productivity. Hardened and ground gears in the spindle gearbox ensure long-term operational stability. Equipped with a lead screw and feed rod for threading, as well as automatic longitudinal and cross feeds. Easy adjustment of spindle speed and automatic feed via an ergonomic control panel on the gearbox. Thread dial indicator designed for precise thread counting. This function saves time by allowing the lead screw nut to be disengaged and the carriage quickly returned to its original position manually. The bed features a removable gap for machining larger workpieces, such as discs. This model allows machining up to a maximum diameter of 900 mm with the gap removed. Technical Specifications: Max. turning diameter over bed: Ø800 mm Max. turning diameter over carriage: Ø540 mm Max. turning diameter in gap: Ø1010 mm Gap length: 240 mm Distance between centers: 3000 mm Bed width: 500 mm Tool size: 25 × 25 mm Max. compound slide travel: 145 mm Max. cross slide travel: 375 mm Spindle bore: Ø105 mm Spindle nose: D1-8 CAMLOCK Spindle speeds: 12 speeds (36–1600 rpm) Number and range of longitudinal feeds: 65 (0.063–2.52 mm/rev) Number and range of cross feeds: 65 (0.027–1.07 mm/rev) Metric threads: 22 (1–14 mm) Inch threads: 25 (28–2 TPI) Module threads: 18 (0.5–7 mm) DP threads: 24 (56–4 DP) Rapid longitudinal feed: 4.5 m/min Rapid cross feed: 1.9 m/min Tailstock quill diameter: 75 mm Tailstock taper: MT5 Max. tailstock quill travel: 150 mm Tailstock cross adjustment: ±15 mm Main motor S1/S6: 7.5/9 kW / 400V Rapid feed motor: 250 W Coolant pump: 60 W Dimensions (L × W × H): approx. 4500 × 1100 × 1450 mm Weight: approx. 4600 kg (±2%) Standard Equipment: 3-axis digital readout 3-jaw self-centering chuck 315 mm 4-jaw independent chuck 400 mm Faceplate 400 mm Rapid feed system Steady rest Follow rest Fixed centers MK5 (2 pcs) Spindle reduction sleeve Cooling system Work light Chuck and tool post keys Set of service tools User manual CE declaration of conformity

Condition: used, Technical data: Centre height: 415 mm Ppedoxpguwopfx Abgsu Centre distance: 1,500 mm Swing diameter over bed: 830 mm Swing diameter over cross slide: 500 mm Bed width: 500 mm Spindle bore: 105 mm Spindle nose: Camlock 11" Speed range: 0 - 1,500 rpm Motor power: 22 / 29 kW Equipment: - FAGOR 8055 CNC control - Turret with 8 positions (VDI 40) - 8 tool holders (VDI 40) - 3-jaw chuck ø 315 mm - Steady rest - Set of levelling elements - Chip conveyor

Condition: new, TC 205 x 1000 Center height: 205 mm Swing over bed: 410 mm Distance between centers: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, Size 6 Cross slide travel: 220 mm Top slide travel: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Continuously variable Mechanical pre-selection stages: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feed Z: 0.05 - 1.7 mm/rev Cross feed X: 0.025 - 0.85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametral threads: (21) 8 - 44 DP Module threads: (18) 0.3 - 3.5 MP Tailstock diameter: 52 mm Tailstock quill: MK 4 Tailstock travel: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Tool machine accuracy according to DIN 8605 - Continuously variable speed control (2 pre-selection stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guides - Monolithic cast iron base - Adjustable precision tapered roller bearings in the main spindle - Easy-to-operate feed gear with a large feed range, running in a closed oil bath. Pedpfxsir If De Abgspu - Low-maintenance central lubrication - Removable bridge Scope of supply: - 3-axis digital display (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool holder with four cassettes - High splash guard and integrated LED work light - Chip tray that can be extended forward - Slip clutch - Fixed steady rest with ball bearing inserts - Traveling steady rest - Micrometer bed stop - Machine feet (1 set of 6 pieces) - Two emergency stop push buttons - Foot pedal with double braking system (mechanical and electrical) - End-switch protected chuck guard, tool holder guard and cover for the lead screw and ball screw in accordance with European safety standards CE - Coolant system - 2 fixed centering points - Reduction sleeve for main spindle - Operating tool - Operating tool in a tool box - Operating manual with parts list

Condition: new, Made in Italy. Maximum turning height: 300 mm Turning diameter over bed: 600 mm Turning diameter over slide: 380 mm Ppodpsd Nk Ncefx Abgou Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (12) 16 - 1200 rpm Motor power: 9.2 kW (optional equipment / standard: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide travel: 340 mm Top slide travel: 150 mm Tailstock ram diameter: 85 mm Tailstock ram travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,200 kg Equipment: - 3-axis digital readout - Automatic lubrication of the guideways - LED lighting - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Quick-change tool holder system Multifix with 4 inserts - Tailstock movement pneumatically assisted - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g., Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: chuck guard with Plexiglas panel, secured by microswitches. Tool holder guard with Plexiglas panel. Rear splash guard over the entire length. Lead screw and feed screw protection by light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip container on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version EMO special price including 3-axis digital readout.

Condition: good (used), Year of construction: 1970, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 52 mm, turning diameter: 360 mm, center height: 180 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 750 mm, total height: 1,400 mm, spindle speed (max.): 1,750 rpm, spindle speed (min.): 60 rpm, overall weight: 1,800 kg, Conventional lathe, center high 180 mm, between centers 1000 mm, bore Ø 52 mm, 12 speed 60 - 1750 rpm, motor 4 kw, camlock 5'', ; equipement: coolant device, 3-jaws chuck Ø 200 mm, tool post MULTIFIX with 7 toolholders, steady rest, lamp, dimensions 230x115x165 cm, weight ca. 1750 kgs Ppodpfsx Dl Nvox Abgsu

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, center height: 228 mm, center width: 1,500 mm, quill stroke: 229 mm, quill diameter: 75 mm, total length: 3,030 mm, total width: 1,200 mm, total height: 2,000 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 20 rpm, overall weight: 2,300 kg, Conventional lathe, center high 228 mm, between centers 1500 mm, bore Ø 76 mm, 16 speed 20 - 1600 rpm, motor 9,3 kw, camlock 8'', dimensions 310x120x200 cm, weight ca. 2300 kgs; equipement: pneumatic chuck SCHUNK ROTA Ø 315 mm, coolant device, 3-jaws chuck Ø 315 mm, several jaws, live center, tool post PARAT WD with toolholders, steady rest, drilling chuck, lamp, manual, cabinet Pjdpfjypud Uex Abgepu

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.3265mm Width/depth (product): approx.1065mm Height (product): approx.1550mm Weight (net): approx.1965kg Working ranges: Center height: 230mm Center width: 2060mm Circumferential diameter over machine bed: 460mm Circumferential diameter in the bed bridge: 690mm Swing diameter over cross slide: 270mm Turning length in the bed bridge: 240mm Bed width: 300mm Speed range: Number of speed ranges: 12 Speed range: 25 - 2000min¯¹ Electrical data: Power drive motor5.5kW Supply voltage400V Mains frequency50Hz Cooling lubricant system Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar passage diameter: 58mm Steel holder max. mounting height: 25mm Spindle cone: MK 6 Tailstock: Ppedpsq Ukbpsfx Abgou Tailstock holder: MK 4 Tailstock quill stroke: 130mm Tailstock quill diameter: 60mm Pitch: Pitch metric:0.1 - 14mm/rev Number of leads metric: 41 Pitch inch: 112 - 2Gg/1" Number of pitches inch:41 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches:34 Travel distance: Top slide travel: 125mm Travel of face slide: 285mm Bed slide travel: 1805mm Feed rate: Feed range longitudinal: 0.031 - 1.7mm/rev Number of longitudinal feeds: 42 Feed range flat: 0.014 - 0.784mm/rev Number of feeds flat: 42 Electrical connection: Total connected load: 5.8kW