Used Cantilever Racking for sale (3,819)

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 3.70m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands € 2.255 (net)! Price for transport within Germany (excluding islands): € 490 (net)! Bwedpef Tv T Nofx Aa Nsi Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 80 Frame: IPE 180 Shelf stand on one side approx. 3,700mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at a load center of 600 mm 500 kg per arm / 2,700 kg per stand with 4 stands per arm level 4 x 500 kg = 2,000 kg with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: good (used), Year of construction: 2005, Cantilever rack, two-sided, height 2.90 m, arms 1.20 m each with 2 crossbeams between the arms/levels, ideal for storing goods, e.g., on Euro pallets - used -: Price ex-site: €24,500 (net) including disassembly and loading! Price for partial quantities upon request - minimum order per rack! Manufacturer: Bruckamp Shelving Systems Type: unknown Year of construction: 2005 Maximum load per arm: 2,000 kg Arms bolted Maximum load per upright: 2 x 2,000 kg Outreach per arm: 120 cm (IPE 100 standard) Total height per rack: 2.90 m (IPE 160) Number of uprights: 69 (currently 3 x 23) The center distance between the frames is 1,240 mm. The heights of the middle and top levels are fixed. These could possibly be offset by drilling new holes. There are no pre-drilled holes. Version / Shelf A: Divided into three sections on both sides Bwsdpfxswi I Tdo Aa Nei Version / Shelf B: No middle section Version / Shelf C: Central section only on the right Condition: Good Available: Immediately Location: Schweinfurt / Würzburg area

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm Bwjdpfxed Tbbds Aa Nsi 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Bwedsmhhx Iepfx Aa Nei - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Bedjmhhyajpfx Aa Nowi Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Bsdpjd Tqalefx Aa Nowi Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Bwodpfofdkb Uox Aa Nei - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: Bodemhhf Sjpfx Aa Nswi 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Bwjdpofdkbhofx Aa Nei Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Height: approx. 2000–4500 mm Width: approx. 1130 mm Usable depth: 1 x 1000 mm Upright load capacity: up to 3000 kg Arm load capacity: up to 500 kg 6 storage levels including base Single-sided design Bolted foot profiles Made from hot-rolled IPE sections Finish: high-quality industrial lacquer RAL 5010 Freely adjustable cantilever arms in 100 mm increments Rack upright: foot and arms bolted Increase storage capacity with reduced footprint Organized storage of long goods Price: €400/net per upright incl. We configure your custom racking system. Contact us. We also buy racks. Please send pictures and dimensions—we will make you an offer. Contact Brennholz Blum – Mr. Dominik Blum Delivery is available upon request For questions, just call or write. Bwedpfsp Dukqox Aa Noi

Condition: used, STOW double-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules: Product code: MPP001693 Height: 750 cm Depth: 267 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 270 mm Net price: €1069.00 net per 1 module/section. Product code: MPP001694 Height: 750 cm Depth: 270 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1239.00 net per module/section. Bwsdpfx Asx Ig Hmsa Nji Product code: MPP001695 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 330 mm Net price: €1569.00 net per module/section. Product code: MPP001699 Height: 750 cm Depth: 267 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg I-beam profile cross-section height: IPE 270 mm Net price: €2,079.00 net for 2 modules/sections. Product code: MPP001700 Height: 750 cm Depth: 270 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile cross-section height: IPE 300 mm Net price: €2,479.00 net for 2 modules/sections. Product code: MPP001701 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €3139.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. * I have large quantities. * Transport possible throughout Europe. * Location: Poland

Condition: used, SSTOW single-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules (IPE 300): Product code: MPP001696 Height: 750 cm Depth: 157 cm Bwjdpsx Igwrofx Aa Nji Number of levels: 0 + 5 Load capacity per arm: 1000 kg I-beam profile cross-section height: IPE 300 mm Net price: €959.00 net per 1 module/section. Product code: MPP001698 Height: 750 cm Depth: 200 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1079.00 net per module/section. Product code: MPP001697 Height: 750 cm Depth: 217 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1195.00 net per module/section. Product code: MPP001702 Height: 750 cm Depth: 157 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1,909.00 net per module/section. Product code: MPP001704 Height: 750 cm Depth: 200 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €2,129.00 net for 2 modules/sections. Product code: MPP001703 Height: 750 cm Depth: 217 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €2,429.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. * I have large quantities. * Transport possible throughout Europe. * Location: Poland

Condition: good (used), Cantilever rack OHRA 3 m high Over 100 m in stock, see pictures. Height 3 m high Boom 100 cm Load capacity/boom 800 kg 4,5 running meters, 4 pcs. uprights with outrigger Negotiation price: € 2.160,-- /net Offer consists of: 4 pcs. uprights with foot 3 m high Bjdecd Dwyepfx Aa Nowi 4 adjustable outriggers, each upright 100 cm, load capacity 800 kg/outrigger. Diagonal braces, stiffeners and distances are included. Frame spacing 150 cm Load capacity per upright per side 3.200 kg Height of 2.5 m, 4 m or 6 m available Other composition on request: Constantly over 3000 running meters of pallet racks from numerous manufacturers in stock. Transport and assembly available on request. (Changes and errors in the technical data, specifications and prices and prices and subject to prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various fields broom-clean business evacuations Business resolutions Fast - flexible - ready to hit! We clear and - or dispose also for liquidators. Write us with some keywords, we will contact you immediately. To get to our site please click on our logo!

Condition: new, OHRA cantilever rack Negotiated price: € 5.940,00 net ex stock You are bidding on a rack with a length of 7.5 m, consisting of 6 uprights with base, 6 m high + 4 adjustable outriggers per upright (120 cm), load capacity 900 kg/outrigger. Diagonal bracing, stiffeners and spacers are included. Bridges, grids and chipboards are available separately at an extra charge! Frame spacing 150 cm Arm length / outrigger 120 cm Load capacity 900 kg / outrigger Bedpfeby Uunjx Aa Njwi Load capacity per upright per side 3,600 kg Over 100 meters available. Heights of 2.5 m, 3 m or 4 m available. Other combinations on request. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous items from various areas Machines from all industries Remaining stock Special items swept clean company clearances Business liquidations Purchase of remaining stock Fast - flexible - ready for action! We also clear and or dispose of for liquidators. Write to us with a few keywords and we will get back to you as soon as possible.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, carrying capacity per cantilever arm: 725 kg, load capacity: 8,700 kg, shelf height: 8,700 mm, total length: 4,700 mm, total width: 2,600 mm, total height: 8,700 mm, axle spacing: 1,500 mm, throat depth: 1,200 mm, load capacity per storage section: 2,900 kg, Equipment: double-sided, Cantilever racking in good condition Bwjdpfx Aaew Uf Eme Noi

Condition: used, Separator element for pallet racking system. Bsdpok Tzzlsfx Aa Nowi Suitable for frames with depths of 1000, 1050, and 1100 mm. Arm length: 500 mm For a 2700 mm bay with 6 arms: 24 pcs – 67 EUR + VAT/piece For a 2700 mm bay with 10 arms: 46 pcs – 89 EUR + VAT/piece For an 1800 mm bay with 7 arms: 4 pcs – 51 EUR + VAT/piece If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking and accessories and are happy to assist you with your planning. Further accessories available upon request, including: Frame, corner, and impact protection, push-through protections, chipboard panels, wire mesh decks, rear mesh panels, and depth support bars. Shipping: Please inquire about shipping costs, specifying your postal code, location, and desired quantity. Additional services: Planning, racking assembly/disassembly, purchase/sale Technical data, specifications, and prices are subject to change and errors. Subject to prior sale!

Condition: excellent (used), total width: 4,000 mm, total height: 7,000 mm, clearance between the columns: 2,000 mm, shelf length: 900 mm, Equipment: double-sided, Composed of 3 double-sided uprights H 7000 mm 9 levels with 750 mm arms Shelf load capacity: 900 kg Bwodpfx Asulufpea Nei Level load capacity: 2700 kg Load per upright front: 8100 kg Upright spacing: 2000 mm

Condition: excellent (used), Year of construction: 2022, total length: 3,600 mm, total height: 11,500 mm, load capacity per storage section: 2,200 kg, For sale: pallet racking by AR RACKING in excellent condition. 450 frames (11500x1100mm) and 4500 beams (3600mm), 2200kg per level. Bwedpfx Aajxvqakj Nji

Condition: excellent (used), Year of construction: 2023, 19-meter AR Racking pallet rack AR Racking pallet rack with a total length of 19,000 mm, consisting of one base bay and six extension bays (2,700 mm each). Each bay has three levels (including floor storage space) with four cross beams (2,700 mm). Each bay can store 3 Euro pallets side by side and 3 pallets stacked (including floor storage space). One bay can accommodate 9 Euro pallets. Manufacturer: AR Racking Type: ARPA-S Total length: approx. 19,000 mm Shelf height: 3,000 mm Shelf depth: 1,100 mm Clear bay width: 2,700 mm Grid spacing: 50 mm End upright frame height: 500 mm Number of storage levels: 3 (including floor storage space) Number of bays: 7 Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 63 Year of construction: 2023 Uprights The frames consist of two omega profiles with their corresponding connectors, post feet, and fastening materials. Bwodpfx Aajxq A Dws Nei The horizontal and diagonal struts are made of galvanized C-profiles. The perforation The omega profile has a 50 mm spacing for the crossbeams. Sendzimier-galvanized material Crossbeams Made of cold-rolled box profile Sturdy suspension bracket for a secure connection Including two locking pins per crossbeam to prevent accidental removal Powder-coated orange Scope of delivery: 6 x AR Racking pallet rack uprights, galvanized, 3000 x 80 x 70 mm 2 x AR Racking pallet rack uprights, galvanized, 3500 x 80 x 70 mm (end upright frame height: 500 mm) 28 x AR Racking pallet rack crossbeams, orange, 2700 x 160 x 50 mm 56 x Locking pins We also offer the shelf in a smaller version. Please feel free to contact us. You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2024, clear span: 2,700 mm, Racking system for sale Frame P90 6500x1100x90 – 356 pcs (60 EUR/pc) Beams 2700x100 (2400kg) – 1248 pcs (8 EUR/pc) Beams 3600x125 (2600kg) – 1820 pcs (12 EUR/pc) Frame Jungheinrich Esmena 6500x1100x85 – 116 pcs (55 EUR/pc) Beams 2700x115 (3000kg) – 674 pcs (9 EUR/pc) Beams 3600x115 (2400kg) – 576 pcs (12 EUR/pc) Bodpfx Asu H Uzboa Newi Frame NEDCON 6500x1100 – 30 pcs (60 EUR/pc) Beams 2700x110 (3000kg) – 1152 pcs (9 EUR/pc) Beams 3600x130 (2800kg) – 480 pcs (12 EUR/pc)

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Bwsdpfx Aoynlraoa Nji Type: PR 600 Included in the scope of delivery: 01x pallet rack beam, used Material color: yellow Box profile: 60 x 40 mm Beam type: TRV1-270-064-30 CE Clear span: 2,700 mm Bracket: 5 HK (hooks) 02x safety pins, used Design: fully galvanized For securing the cross beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is desired, additional costs will apply. These can be requested from us separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: Jungheinrich Type: MPB Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 1007 Daffodil Yellow Box profile: 80 x 50 mm Beam type: AUF'B'H0488 Design: End beam Bracket: 4 HK (hooks) Clear width: 1,350 mm 02x Locking pins, used Finish: Fully galvanized For securing the cross beams To prevent unintentional lifting Note: Suitable for accommodating horizontal braces. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Bwsdpfsymlt Iox Aa Noi General information about the item: This item is only available for collection. Any transportation or shipping of the item is subject to additional costs, which can be requested from us separately depending on the place of delivery and/or scope of delivery.

Condition: good (used), Technical data for the pallet rack beam: Bedpsymdaaefx Aa Nowi Racking system manufacturer: Jungheinrich Type: MPB Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 1007 Daffodil Yellow Box profile: 80 x 50 mm Beam type: AUF'B'E0488 Connector: 4 HK (hooks) Clear span: 2,700 mm Maximum load per pair of beams: 1,600 kg, with evenly distributed load. 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams To prevent unintentional removal Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Should additional transport or shipping be required, this will incur extra costs, which can be provided separately depending on the delivery location and scope. Please contact us for a quote.

Condition: good (used), Technical Specifications for Pallet Rack Beam: Racking System: Jungheinrich Type: MPB Included in delivery: 01x Pallet rack beam, used Color: RAL 1007 Daffodil Yellow Box profile: 125 x 50 mm Beam type: AUF'B'E 0485|15 Connector: 4 HK (hooks) Clear width: 2,700 mm 02x Safety pins, new Design: fully galvanized For securing the crossbeams Protection against unintentional lifting Bodpfx Aaeyl Tygj Nowi Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Transportation or shipping of this item is possible at additional cost, which can be quoted separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2012, Second hand MISTRELLO semi-automatic glass storage racks – 22 positions (for Jumbo or 2 x DLF glass sheets), year 2012 Bwjdsyqyclspfx Aa Nji