Used Capacitive Sensor for sale (6,149)

Condition: good (used), Capacitive sensor, electronic sensor -Manufacturer: IFM Cslhcdsb A E U Nowxjhb -Product Type: KD-3050-BPOG -Quantity: 4 available -Price: per piece -Weight: 0.5 kg

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting Chjlovpalajhcdwxob parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Cholhcowl H Nisdwxeb Model - KBBFT1300A. Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: like new (used), Year of construction: 2023, Huber CS 550 OD Cooling Unit / Chiller Manufacturer: Peter Huber Kältemaschinenbau SE Type: CS 550 OD Year of Manufacture: 11/2023 Machine Type: Cooling Unit / Chiller / Process Cooler Cooling Capacity: 55 kW at +10 °C supply / +50 °C return temperature Chelhcdwszt Iqzexsb For sale is a like-new Huber CS 550 OD chiller with an air-cooled cooling unit and circulation pump. The unit has not yet been used. The system is suitable for industrial process cooling, machine cooling, chilled water supply, and temperature control applications. The special design is suitable for outdoor installation and winter operation. Technical Data: Model: CS 550 OD Item No.: 32-100110 Year of Manufacture: 11/2023 Temperature Range: -20 to +85 °C Internal Temperature Sensor: Pt100 Temperature Stability at -10 °C: 2 K Interface: RS232 Safety Class: I / NFL Heating Capacity: 17 kW Power Connection: 400 VAC / 50 Hz / 3Ph+N+PE Power Consumption: 27.5 kW Max. Current Consumption: 52 A Refrigerant: R449A Refrigerant Quantity: max. 23 kg Max. Operating Pressure: 28 bar Made in Germany Cooling Capacity: According to the nameplate: 55 kW at +10 °C supply / +50 °C return temperature At 20 °C ambient temperature: +15 °C: 70 kW +10 °C: 60 kW 0 °C: 33 kW -10 °C: 20 kW -20 °C: 12 kW Circulation Pump: Pump: CM5-4 Max. Flow Rate: 125 l/min Max. Head: 4.0 bar Pump Connection: G1 male Min. Filling Volume: 160 l Low-Level Alarm: 175 l Max. Filling Volume: 195 l Dimensions: External Dimensions (W × D × H): approx. 1,400 × 1,000 × 1,800 mm Net Weight: approx. 715 kg Sound Pressure Level: 79 dB(A) ± 4 dB(A) Equipment: Air-cooled cooling unit Circulation pump Housing and tank made of stainless steel Copper-brazed evaporator Digital level indicator High-efficiency fan motor Feed pump with over-temperature protection Manual bypass valve Control unit B400 / RB400 Capacitive user interface with OLED display Multi-color status indicator RS232 interface Separate operating/control panel Connection/connecting cables as shown in the pictures Temperature control/connecting hoses as shown in the pictures Connecting fittings as shown in the pictures Electrical components IP54 Outdoor installation / winter operation up to -20 °C Max. Ambient Temperature +50 °C Mobile unit housing Additional accessories as shown in the pictures Transport Data: Unit dimensions: approx. 1,400 × 1,000 × 1,800 mm Net weight: approx. 715 kg Wooden transport crate available. Shipping via freight forwarder possible. Condition: Like new / not yet in use. Year of Manufacture: 11/2023 Optical condition as shown in the pictures. Accessories partially in original packaging or in accessory boxes. Scope of Delivery: 1 × Huber CS 550 OD Cooling Unit / Chiller 1 × separate operating/control panel Connection/connecting cables as shown in the pictures Temperature control/connecting hoses as shown in the pictures Connecting fittings as shown in the pictures Several Huber accessories as shown in the pictures 3 × accessory boxes with contents as shown Additional accessories as shown in the pictures Wooden transport crate Availability: by arrangement. Scope of delivery as shown. Subject to change, errors and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, operating hours: 4,000 h, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: trumpf, laser hours: 15,231 h, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 300 m/min, feed rate Y-axis: 300 m/min, feed rate Z-axis: 250 m/min, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 100 mm Laser power: 5,000 W Laser unit: CO2 laser TLF 5000, high-frequency excited, replaced two years ago Maximum workpiece weight: 900 kg Chelhcdwjztad Hjxsb Positioning speed (X/Y): 200 m/min Simultaneous positioning speed (X+Y): 300 m/min Maximum steel sheet thickness: 25 mm Maximum stainless steel sheet thickness: 25 mm Maximum aluminum sheet thickness: 15 mm MACHINE DETAILS Electrical operating hours: 39,836 h Cutting hours: 15,231 h Control model: Siemens Sinumerik 840D Control features: Open PC-based control system Online support Diagnostic functions Maintenance log Technological data Remote support Safety equipment: Multi-beam photoelectric barriers and safety enclosure Fully enclosed optical guide with nitrogen ventilation Surveillance system Multi-zone extraction and compact dust filter Paint: white RAL 9002 / gentian blue RAL 5010 Drives: Gantry drive combined with direct linear motors OTHER FEATURES Cooling unit Logbook function Automatic pallet changer Laser power control HI-LAS high-pressure cutting PMS plasma sensor Programmable power cycles Programmable cutting gas pressure adjustment Laser cutting head with 5", 7.5", 9" and 3.75" lenses Quick-change system for cutting heads Automatic sheet edge detection Capacitive height control and APC process control PCS Upon request, a quotation can be provided for disassembly and preparation for transport.

Year of construction: 2021, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: 20 mm MAX CIRCULAR SECTION: 152,4 mm MAX SQUARE SECTION: 152,4 X 152,4 mm SOURCE: IPG fibra 3000W ; 3000 W CONTROL UNIT: CUTLITE PENTA Z32 ACCESSORIES: FUME EXHAUSTER ; ETHERNET PORT ; Chjlhozxu Nnecdwxjb USB PORT NOTE: AUTOMATIC BAR LOADING 6500mm; BAR UNLOADING UP TO 6000 mm; TUBE UNLOADING CUTTED ON THE BELT - MAX LENGHT 5000mm; CAPACITIVE SENSOR; No 2 INNER MONITORING WEBCAMS; ADDITIONAL X AXIS FOR HIGH-SPEED DRILLING; ALMA SOFTWARE

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Cslhcdwozrg T Eexohb Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing Colhcdwjv Sm Ruoxohb • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC 025, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 6,500mm Condition: Very Good Hours: 22,500hrs Availablility: Immediately This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Celhcdex Ddagswxehb Machine Dimensions & Weight System footprint (L=8500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Extraction & Cooling Systems Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,500 h, laser power: 6,000 W, travel distance X-axis: 4,064 mm, travel distance Y-axis: 2,032 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3-axis Salvagnini L3-4020 fiber laser cutting machine was manufactured in 2017. It features a powerful 6.0 kW solid-state fiber laser source, with a maximum working range of 4064 mm in the X-axis and 2032 mm in the Y-axis. The machine includes advanced automation components for efficient material handling and cutting. If you are looking to get high-quality sheet metal cutting capabilities, consider the Salvagnini L3-4020 machine we have for sale. Contact us for further details. • Height adjustment: 980 mm • Table load: 1250 kg • Laser Cutting Head: Patented "Dry Cooling" focusing head with auto-focus 210 mm lens and capacitance anti-collision profiling • Main electronic connection: 400 V / 50 Hz • Power consumption: 27 kWh • Year of Order Confirmation: 2017 • Machine Type: Fiber Laser Cutting Machine • Application Type: Sheet Metal Cutting • Maximum Axis Acceleration (X / Y): 1.5 g / 2.0 g • Material Cutting Capacity (Maximum Thicknesses): Mild Steel 25 mm, Stainless Steel 20 mm, Aluminum 20 mm, Copper 8 mm, Brass 8 mm • MTW4020.V5 Five-position storing module (Max capacity 3000 kg per tray) • Motorized Scissor Table (Max capacity 3000 kg) • Connection for automatic sheet loading and unloading (Unloading comb matrix) • Extra bay lengthened main automation structure • LTS4020 Tray supporting station with leafing magnets • MCL40 Cartesian Manipulator / Stacker with dual rotating gripping devices (Max part capacity: 65 kg single / 130 kg dual) • MCL Magnet kit (10 magnets total for picking up perforated or small parts) • TCV4020 Stacking Scissor Table (Max capacity 5000 kg, 1000 mm stroke) • CCVT40 Motorized Carriage (Short side mobile, max capacity 5000 kg) • PPC4020 Gantry Mobile Carriage & PMC4020 short-side mobile carriage • APC2 Adaptive Process Control (Double-channel sensor reading piercing spectrum and cutting losses) Colhezk D Hmscdwxjhb • AVS Artificial Vision System (HD camera for parts referenced program generation from dxf/dwg) • ANC Automatic Nozzle Change (8-position nozzle carrier with integrated cleaning brush) • GF Interchangeable grids with mild steel slats & CRS Scrap collection bins • ASF Fume Extraction unit with high-efficiency filtering sleeves, pneumatic cleaning, and integrated spark trap

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,550 h, laser power: 500 W, table length: 3,048 mm, table width: 1,524 mm, travel distance X-axis: 1,524 mm, travel distance Z-axis: 3,048 mm, overall weight: 2,495 kg, total width: 2,083 mm, total height: 1,346 mm, product length (max.): 3,988 mm, table load: 1,000 kg, number of axes: 3, CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine. Machine – JustLaser 15.30L-C500-MC • Machine Type: CO₂ Laser Cutting and Engraving System • Configuration: Open Flatbed Gantry Laser System • Maximum Workpiece Height: 50 mm • Maximum Engraving Speed: 3.8 m/s • Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s • Maximum Engraving Speed (Z12 Option): 1.5 m/s • Maximum Cutting Speed: 0.5 m/s • Motors: Brushless DC Servo Motors • Encoder System: Incremental Measurement System • Optics: Air-purged telescope, lenses and mirrors • Standard Lens: 2.5" • Optional Lens: 5.0" • Software: KCAM Laser Software • Interface: G-Code, HPGL, AD-Logic System • Control Board: KLCM Controlboard • Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included • Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table Exhaust Requirement: 3000 m³/h • Axis Exhaust Requirement: 1500 m³/h • Maximum Air Pressure: 10 bar • Maximum Inlet Pressure: 12 bar • Maximum Air Flow: 240 l/min • Connection Size: 6 mm • Noise Level: 55 dB • Certification: CE • Operating Temperature: +15 °C to +25 °C • Humidity: 40–70 % Non-Condensing • Environment: Dust-Free • Active Laser Protection Shield • Pressure Sensors • Light Curtain • Interlock Safety System • Metal Cutting Option Included • Capacitive Height Follower • Metal Cutting Table • Copper Nozzle • 2.5" Lens Set • k-vision Print & Cut Camera System • JustAIR High Performance Turbines (2 × 1500 m³/h) Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser Type: Sealed-off CO₂ Laser • Laser Power: 500 W (0.5 kW) Celhcdwjzbub Dexjhb • Laser Wavelength: 10.6 µm • Supply Voltage: 380–415 VAC • Phase: 3 Phase (4 Wire + Ground) • Frequency: 50/60 Hz • Maximum Fuse Size: 40 A • Full Load Current: 32.3 A • Disconnect Rating: 40 A • Short Circuit Current Rating: 5000 A • Interrupt Capacity: 35000 A • Largest Amp Load: 16 A • Laser Class: Class 4 • Country of Manufacture: USA Chiller – SMC HRS090-AF-40 • Cooling Type: Water Cooling • Cooling Capacity: 5 kW • Refrigerant: R410A • Refrigerant Charge: 1.5 kg • Weight: 136 kg • Power Supply: 3~ 380–415 V, 50/60 Hz

Condition: used, Year of construction: 2024, operating hours: 336 h, Equipment: all wheel drive, Internal Vehicle No.: G300427 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Cslsyrv S Sjhcdwxjhb Merlo Roto 50.21 Rotating Telehandler | 21 m Lifting Height | 4,950 kg Load Capacity | 336 Hours For sale is a used Merlo Roto 50.21 rotating telehandler, manufactured in 2024 with only 336 operating hours. This machine combines a maximum lifting height of 21,000 mm with a load capacity of 4,950 kg and a horizontal reach of up to 17,900 mm. The upper carriage can rotate up to 600°. Permanent all-wheel drive, three steering modes, four independently controlled outriggers, and the adaptive stability control system enable versatile and safe operation. Technical specifications: * Manufacturer/Model: Merlo Roto 50.21 * Machine Type: Rotating Telehandler * Year of Manufacture: 2024 * Operating Hours: 336 hours * Engine Power: 55 kW * Emission Level: EU Stage V * Maximum Load Capacity: 4,950 kg * Maximum Lifting Height: 21,000 mm * Maximum Horizontal Reach: 17,900 mm * Rotation Range of the Upper Carriage: 600°, electronically limited * Transport Weight: 15,800 kg * Transport Length: 6,830 mm * Transport Width: 2,430 mm * Transport Height: 3,120 mm * Fuel Tank Capacity: 150 liters * Quick Coupler: ZM2 * Permanent All-Wheel Drive * Three Steering Modes * Four Independently Controllable Outriggers * Inspection: New * Vehicle Number: G300427 * Condition: Used Equipment: * Adaptive Stability Control System (ASCS) * 10.1-inch digital display with real-time information on the machine and load * Stage Preparation * Radio Remote Control * CDC sensor for automatic attachment recognition * Hydraulic quick-release mechanism * Joystick with capacitive activation * Direction switch on the joystick * Automatic increase in engine speed * ROPS/FOPS cabin * 4.3 m² glass surface * Permanent all-wheel drive * Three steering modes * Four individually controllable outriggers * ecoRent version Inspection and functional testing possible after prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale.

Condition: used, Year of construction: 2024, operating hours: 336 h, Equipment: all wheel drive, Internal Vehicle No.: G300427 Available immediately at our yard in Kaufungen. More information: ? Luis Lucena ? Viktoria Sologubova Merlo Roto 50.21 Rotating Telehandler | 21 m Lifting Height | 4,950 kg Load Capacity | 336 Hours For sale is a used Merlo Roto 50.21 rotating telehandler, manufactured in 2024, with only 336 operating hours. The machine combines a maximum lifting height of 21,000 mm with a load capacity of 4,950 kg and a maximum horizontal reach of up to 17,900 mm. The upper carriage can rotate up to 600°. Permanent all-wheel drive, three steering modes, four independently controlled outriggers, and the adaptive stability control system enable versatile and safe operation. Celhcjytlk Hsdwxshb Technical data: * Manufacturer/Model: Merlo Roto 50.21 * Machine type: Rotating telehandler * Year of manufacture: 2024 * Operating hours: 336 h * Engine power: 55 kW * Emission stage: EU Stage V * Maximum load capacity: 4,950 kg * Maximum lifting height: 21,000 mm * Maximum horizontal reach: 17,900 mm * Rotation range of the upper carriage: 600°, electronically limited * Transport weight: 15,800 kg * Transport length: 6,830 mm * Transport width: 2,430 mm * Transport height: 3,120 mm * Fuel tank capacity: 150 liters * Quick coupler: ZM2 * Permanent all-wheel drive * Three steering modes * Four independently controlled outriggers * MOT: New * Vehicle number: G300427 * Condition: Used Equipment: * Adaptive Stability Control System (ASCS) * 10.1-inch digital display with real-time information about the machine and load * Stage preparation * Remote control * CDC sensor for automatic attachment recognition * Hydraulic quick-change system * Joystick with capacitive release * Direction switch on the joystick * Automatic engine speed increase * ROPS/FOPS cabin * 4.3 m² large glass area * Permanent all-wheel drive * Three steering modes * Four individually controllable outriggers * ecoRent version Inspection and functional testing possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change.

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning Chslszv Sarjhcdwxob - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 53,000 h, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840 D, laser type: CO₂ laser, laser power: 3,200 W, punching diameter: 76 mm, sheet thickness steel (max.): 8 mm, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, quick-change device, safety light barrier, Special equipment: + 2000 on Laser TruFlow 3200 + Blow-out device for small parts + Thread forming function with thread former breakage monitoring + MultiShear function + Slitting function + Marking/Fast chamfering function + Softpunch function + Re-punch cylinder + Vibration-damped mounting + Chip conveyor with tilting container + Additional clamping arm Manufacturer's standard description: Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Cutting head quick-change system - Programmable cutting gas selection/pressure setting - Capacitive height control Dias III - Function: ContourLas - Slag cone detection - Compact dust extractor Chjlhcjzdc Hmedwxjb - Tank heater - 18 tool cassettes - 18 die plates - Automatic tool changer with 19 stations - 2 clamping arms - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic re-punching - Tool length compensation - Fast shutdown of the hydraulics - Automatic shutdown - 2 automatic dividing slides for parts 500 x 500 mm each - Sensors for both dividing slides - 2 scrap bins - Punch scrap extraction - Forming capability - Programmable stamping tool lubrication with 2 containers - Programmable pressure plate - Adaptive stroke length control - Safety devices - Remote diagnostics system - RJ 45 network connection - 3.5'' floppy disk drive - Comprehensive operating manual

Year of construction: 2016, condition: ready for operation (used), - USED - CO2 TUBE LASER CUTTING MACHINE WITH LOADING/UNLOADING SYSTEM MAX CUTTING THICKNESS: 16 mm mm MIN CIRCULAR SECTION: 80 mm MAX CIRCULAR SECTION: 610 mm MAX SQUARE SECTION: 400x400 mm Cslhceytkdledwxshb MAX RECTANGULAR SECTION: 500x300 mm SOURCE: ROFIN DC045 ; 4500 W CONTROL UNIT: SIEMENS 840D WEIGHT: 100000 Kg ACCESSORIES: FUME EXHAUSTER NOTE: LENGTH OF LOADING BAR MIN.4.000-MAX 18.000 mm; LENGTH OF UNLOADING BAR MIN. 3.000 - MAX 12.500 mm; SHORT PIECE UNLOADING LENGTH UP TO 3.200 mm; 3D HEAD; CAPACITIVE SENSOR; AUTOMATIC SETTINGS; BOOSTER; FOCUS AUTOMATIC ADJUSTMENT. MACHINE REVISED BY BLM ADIGE BEFORE DISMANTLING

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm Cholhcdox E Eihjwxob MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: excellent (used), Year of construction: 2008, For sale is a used TruLaser 3530 laser cutting machine. Technical data: Colhsixl Tnecdwxohb - Operating hours: Beam-on 2955 h / Laser-on 15464 h - X-axis travel: 3000 mm (max. 3104) - Y-axis travel: 1500 mm (max. 1580) - Xp-axis travel: 300 mm (max. 305 mm) - Z-axis travel: 114 mm - Max. material thickness: 20 mm - Maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - Max. positioning speed, axis-parallel: 120 m/min - Simultaneous: 170 mm/min - Acceleration during positioning, X-axis: 9 m/second - Xp + Y-axis: 15 m/second - Cutting, X-axis: 4 m/second - Cutting, Xp and Y-axis: 15 m/second Standard equipment: - Enclosed machine frame with integrated laser resonator - Motion unit for optimal processing speeds - Additional high-dynamic Xp axis - Automatic pallet changer - Enclosed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focal position - Compressed air cutting - PierceLine, reduction of the piercing process - PlasmaLine, plasma sensor technology - SprintLine, fast processing - LensLine - FlyLine - ContourLine, for producing small holes - Microweld - Spray device - Positioning laser diode - Programmable cutting gas pressure - Automatic shutdown - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope and maintenance-free turbo-radial blower - Laser control TASC 3, logbook function and cooling unit - Laser cutting head with 5 and 7.5 lenses and quick-change device - ControlLine, capacitive height control and process control - Control system Sinumerik 840D: Open control - Causes of error messages via diagnostic functions Extended machine equipment: - Pallet changing system - Laser cutting heads 5" and 7.5" - Additional laser cutting head with 3.75" lens for high-speed cutting - Dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 Year of manufacture: 2008 Special price: €45,000 net Machine has been disassembled. Can be viewed after prior arrangement. If interested, please contact us.

Condition: ready for operation (used), Year of construction: 2004, laser power: 6,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details. • Control system: Siemens Sinumerik 840 D • Working area: 3000 × 1500 × 100 mm • Paint: white RAL 9002 / gentian blue RAL 5010 • Enclosed machine frame with integrated laser unit Chsloym A Hrohcdwxob • Laser unit: CO₂ laser TLF 5000, high-frequency excited • Cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor for small parts/waste • Drives: gantry drive combined with linear direct drives • Laser power control • HI-LAS high-pressure cutting • PMS plasma sensor system • High-speed processing with SprintLas • ContourLas for producing small holes • Programmable power cycles • Microweld • Programmable cutting gas pressure control • Laser cutting head with 5" lens and 7.5" lens • Quick-change system for cutting heads • Automatic sheet edge detection • APC capacitive height control and process control • PCS (Process Control System) • Positioning laser diode • Automatic focus adjustment (AutoLas Plus) • Spray device for safe thick sheet processing • Automatic shutdown • Working area lighting • Max. workpiece weight: 900 kg • Positioning speed (X/Y): 200 m/min • Simultaneous positioning speed (X+Y): 300 m/min • Maximum iron thickness: 25 mm • Maximum stainless steel thickness: 25 mm • Maximum aluminum thickness: 15 mm • Sinumerik 840D control: • Open PC-based control system • Easy operation • Online help • Diagnostic functions • Maintenance logbook • Technology data • Remote service • Shopfloor programming: ToPs 100 lite • Safety • Multi-beam light barriers • Fully enclosed beam guidance with nitrogen ventilation • Monitoring system • Multi-chamber extraction and compact dust collector • Protective enclosure • Software for Machine System • TruTops Laser postprocessor TCL 3050 – 1 unit • Control system software Cell machine TCL3050 (2nd license) Additional equipment • TRUMPF LiftMaster loading and unloading unit (currently not installed) • Base unit incl. sheet separation device and thickness measuring system • Rack extension (R), interchangeable tines • Pallet handling extension (P) • Separation of thin sheets (1–2 mm) • Third position without unloading station • Unloading station • Stainless steel tines for low-scratch handling • LiftMaster base frame for warehouse connection and double loading/unloading carts • Safety devices: second light barrier circuit • Extended Machine Equipment • Cutting head with 3.75" lens for high-speed cutting • Additional cutting head with 10" lens for thick sheet processing • Automation Preparation (for future upgrade) • Preparation for LiftMaster (standard pallets) • Includes installation, commissioning, and training • Includes warranty, transport, and packaging • Network connection

Condition: used, mileage: 26,958 km, power: 96 kW (130.52 HP), first registration: 05/2025, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 5,981 mm, total width: 2,059 mm, total height: 2,536 mm, loading space length: 2,488 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Errors and prior sale reserved! Internal number: 1021. SP68417 ----EQUIPMENT * Registration as a truck (N1) = vehicle tax €210/year * LED lights in the cargo area * Paint: Metallic * Transmission: 6-speed manual * Anti-lock braking system (ABS) with electronic brake force distribution (EBD) - Electronic stability program (ESP) with traction control (TCS) - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake assist incl. emergency brake light - additionally with trailer stabilization only in conjunction with a trailer hitch (surcharge applies) * Axle load increase - front to 1850 kg * Airbag, driver side * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Battery: Battery runtime, programming of the battery runtime to 10 min * Floor, rubberized, complete vehicle length * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Third brake light * Roof, medium * Headliner in driver's cab and passenger compartment * Double-wing rear door with 180° opening angle (without window) * Tachometer * Windows: Sliding windows, right and left (at the height of the 2nd row of seats) * Front power windows, electric - with quick-down/up function for the driver's side * Parking brake, electronic * Ford Easy Fuel - comfort fuel filler cap and misfueling protection * FordPass Connect - incl. live traffic information and WLAN hotspot 5GModern - Information about the current status or location of the vehicle as well as control of selected vehicle functions via the smartphone with the FordPass app - Current traffic information in real time (in conjunction with a navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices), - More information on FordPass Connect can be found at / * Windshield, heated * Glove compartment, lockable Celhcdszxvxwewxohb * Interior lighting with delay function, additionally with reading lamps in the front * Automatic climate control * Fuel tank, 70 liters * Cargo area lighting * Headlight range adjustment * Fog lights * Emergency call assistant * Technology Package 2 - Ford audio system - Fog lights - LED downlight - Pre-Collision Assist, radar-based - Lane Keeping Assist - Traffic Sign Recognition System - Park Pilot System rear - Park Pilot System front - Cruise control - Rearview camera * Particulate filter: Diesel particulate filter * Radio accessories: 12" multifunction display and Ford SYNC 4 communication and entertainment system with voice control as well as Bluetooth and USB interface - Integration of various telephony functions and hands-free system with voice control - SMS read-out function with display in the multifunction display - Integration of storage media - Emergency call assistant - Ford Power-Up software updates - Support for Android Auto and Apple CarPlay, AppLink (wireless) - Capacitive touchscreen technology - 15 different languages * Tire pressure monitoring system (TPMS) * Windshield wipers with rain sensor * Headlamps - low beam: Halogen headlamps with daytime running lights * Sliding door: Sliding door, right * Mud flaps, rear * Side protection strips * Side paneling, low, height 640 mm * Power steering * Seat belts - Seat belt pretensioners and force limiters, front * Rear seat package 2 - 3-seater bench in the 2nd row (expandable) - Headrests, height adjustable - ISOFIX mounting

Condition: new, Year of construction: 2026, Product characteristics The plasma burner or oxygen-gas CNC1 burner is a mobile device designed for cutting shapes out of a metal sheet. The machine does not require anchoring, thus reducing the assembly time considerably. Additionally, it enables for placing the machine in any location within the hall without any new expenses. The machine is equipped with an excellent quality wheel system that together with the low weight portal makes the plotter one of the fastest machines available on the market. The machine can be used for manual and automatic cutting. It is equipped with a digital controller that enables cutting out complicated shapes. The machine proves itself very well in the shipbuilding, machine-building and power industry. CNC1 has been equipped with a precise system of X/Y axes guides. The burner is controlled by Sino-USA electronic production system that is characterized by a high precision and elimination of the errors occurring during operation. The machine is very easy to configure. A manual configuration is possible for simple shapes and automatic configuration is possible for more complicated figures. The cutting pattern and the burner motion are shown on a display. An original FastCAM software is attached to the machine for easy configuration. The software is in English which makes the work easier. FastCAM is a technological CAD/CAM program, which is intended for designing and defining cutting paths of the elements cut out by CNC burning machines. The program shall be installed on an office PC or on a portable computer. After defining the way of cutting the operator receives a ready control code, which should be transferred to the control system of the machine. FastCAM program is a standard element of our machines. BASIC INFORMATION User-friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them in CAD system. The program provides 2D figures NESTING – an optimal usage of sheet metal thanks to the automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen VOLTAGE HEIGHT CONTROLLER The machine is equipped with THC (a voltage control of the plasma burner blowtorch height). A precise control (+/- 0.1 mm) of the plasma blowtorch distance from a sheet metal during cutting. Higher accuracy and absence of defects which capacitive sensors and roller disks have. The parameters of the controller are collected automatically from the Automatic Cutting Parameters Selection table. Technical data Power supply Cholovxhwvohcdwxob 230 V LCD 7" color Code format G-Code Working dimensions 1500×3000 mm Cutting speed 50–3000 mm/min Illustrations are preview only, the device is sold without the table. Manufacturer: Cormak

Condition: used, mileage: 46,784 km, power: 121 kW (164.51 HP), first registration: 01/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,330 mm, loading space width: 2,081 mm, loading space height: 2,347 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Errors and prior sale excepted! Internal number: 1234. RC29108 ----EQUIPMENT * Box body with LBW Dhollandia tailgate lift * Wheels: Twin tires - 6 J x 16 steel rims with 195/75 R 16 tires - incl. spare wheel, increased front axle load to 1,850 kg, and roof marker lights * SVO: DPF Regenerator, manual * Transmission: 6-speed manual transmission * Anti-lock braking system with electronic brake force distribution (EBD) * Airbag, driver's side Cslhcozx Iytjdwxjhb * Exterior mirrors, electrically adjustable/heated/foldable * Exterior mirrors, short arm - with integrated turn signals * Battery: Battery runtime, programming of the battery runtime to 10 min * Floor covered with rubber up to the partition * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, flat * Roof, overhead storage compartment in the front * Headliner in the driver's cab * Roof marker lights * Tachometer * Electronic Stability Program (ESP) with Traction Control (TSC) - Hill Start Assist - Side Wind Assist - Safety Brake Assist - Rollover Protection - Emergency Brake Assist incl. Emergency Brake Light * Power windows, front - with quick-down/-up function for the driver's side * Parking brake, electronic * Ford Easy Fuel - comfort fuel filler cap and misfueling protection * FordPass Connect incl. Live Traffic information and 5G modem WLAN hotspot - information about the current status or location of the vehicle as well as control of selected vehicle functions via the smartphone with the FordPass app - real-time traffic information (in conjunction with the navigation system) - WLAN hotspot (up to 5 G/LTE, for up to 10 mobile devices) * Headlights: Halogen headlights with daytime running lights * Glove compartment with lockable lid * Interior lighting with delay circuit and reading lights in the front * Automatic climate control * Fuel tank 70 liters * Paint: Solid color * Emergency assistance * Package: Technology Package 11 - Ford audio system 2 - Fog lights - Pre-Collision Assist, radar-based - Lane Keeping Assist - Traffic Sign Recognition System - Park Pilot System, front - Cruise control - Rearview camera * Particulate filter: Diesel particulate filter * Radio: 12 Multifunction display and Ford SYNC 4 communication and entertainment system with voice control, Bluetooth, and USB interface - integration of various telephone functions - playback of music - integration of storage media - emergency assistance - Ford Power-Up software updates - AppLink (wireless) - support of Android Auto and Apple CarPlay - capacitive touchscreen technology - 15 different languages, graphically and acoustically * Tire pressure monitoring system * Windshield wipers with rain sensor * Power steering * Seatbelts - Seatbelt pretensioners and force limiters, front * Seats: Seat package 18A - Driver's seat, 4-way adjustable (forward/backward, backrest, inclination, height) - Passenger double seat - Headrests, height-adjustable - Tray on the passenger double seat (foldable) - Interior armrest for the driver - Lumbar support for the driver - Airbag, passenger side incl. deactivation function - Side, head, shoulder airbags right and left - Seat cover: Fabric * Start-stop system * Front bumper * Recirculation mode * Immobilizer * Heat protection glazing, lightly tinted * Central locking with remote control ... and more ----The vehicle is in its original condition! Nationwide delivery possible for an extra charge. Errors a

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Serial No.: 21901006 Chslhjzvrmxscdwxob CE compliant, Laser Notice No. 50 (2007) Complete with case as pictured

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, Equipment: centralized greasing system, dust extraction, emergency stop, fume extraction, safety light barrier, Tube Laser Cutting System Ideal for Entry-Level Applications. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for workshops, metal fabricators, and others looking to step into tube laser processing, this laser offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your production with precise cuts and user-friendly technology, adding value to your operation. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm Colhcderkntcewxshb - Brass: 6 mm Capacity: - Maximum Tube Diameter: Ø250 mm - Maximum Square Profile Dimensions: 160x160 mm - Maximum Rectangular Profile Dimensions: 200x150 mm - Minimum Tube Diameter: 16 mm - Maximum Material Length: 6000 mm - Minimum Remnant Length: 65 mm - Unloading Length: 3000 mm - Semi-automatic unloading unit: optional (6m) - Maximum Material Weight: 58 kg/m - Maximum Total Workpiece Weight: 350 kg - Profile types that can be cut: Round, square, rectangular, elliptical - Open profile types that can be cut: I, C, L - Maximum open profile dimensions: 240x240 mm Dynamics: - X-Axis: 40 m/min - Y-Axis: 94 m/min - Z-Axis: 30 m/min - A-Axis: 510 °/s Accuracy: - Positioning Accuracy: ±0.2 mm - Positioning Variation: ±0.05 mm - Tube Center Detection with Capacitive Sensor: Yes Additional Available Configurable Options. LASER POWER: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar Air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar Air) - CNC oscillating head (+/- 45°) - Semi-automatic front loading system - Unloading table (6m) with conveyor - Unloading table (3m) with conveyor - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud License + D-Mobile + Smart Watch - STEP file importer

Condition: used, This listing is for the Pendotech PMAT3 Pressure Mat Sensor Monitor The unit is in full working condition and is ready for immediate use The PendoTECH PressureMAT (PMA23/PMAT) is a dedicated pressure monitor, alarm, and transmitter designed specifically for use with PendoTECH’s single-use pressure sensors in biopharmaceutical and laboratory environments. Here's a breakdown of its key functions and features: What It Does Monitor: Displays real-time pressure readings (range from approximately –7 to 75 psi, or corresponding bar values) on a user-friendly backlit LCD for applications such as filtration, chromatography, and bioreactor pressure monitoring Alarm: Users can configure minimum and maximum pressure set-points. If readings fall outside these thresholds, the device triggers alarms—via on-screen warnings, audio alerts, and relay outputs to control external pumps or valves Transmitter: Delivers analog output signals (4–20 mA) and RS‑232 data outputs for integration into process control systems or PCs. Optional internal data logging may also be available Celhcdexhfq Ijwxshb Models & Capabilities Standard Units: Versions available for 1 to 4 pressure sensor inputs. High-Resolution (HR): Tailored for low-pressure applications, offering up to 10× better precision PLUS Series: More advanced models (e.g., PMAT2P, PMAT3P) support additional functionalities like flow meter inputs and total flow measurement, plus external analog input and broader integration options