Used Miniature Force Sensor for sale (11,345)

Condition: good (used), Kistler 9041A Piezoelectric Force Sensor, Force Ring Fz 90 kN Item condition: Used R12A5K2-5-PD (BOR) More sensors - new and used - you will find in our store! Kodpfx Ask Uul Eog Uedn International shipping costs on request!

Condition: good (used), Force measuring device, force measuring instrument, calibration, force measurement technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor -Manufacturer: Lorenz, 4 pieces tension and compression force sensor with Durbal, rod end spherical bearing -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN -Sensitivity: 1.000mV/V / 0.999mV/V / 1.001mV/V -Swivel bearing: Durbal EF 35-20-501 -Dimensions of the articulated rod: 445 to 530 x 81 x 65 mm -Fork head: Bore Ø 35 mm -Number: 3 boxes available, sensitivity as shown in photos Kdjdpsg Sxyvsfx Ag Uen -Price: per box -Box dimensions: 590/390/H200 mm -Weight: 30.2 kg/box

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Kdedpjzdn H Rofx Ag Ujn Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Year of construction: 2012, condition: good (used), Item: inos iSENS laser sensors with control unit, cable, and PC interface Ksdpfx Ajzdn T Rjg Ujdn Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Binder FD 53 Drying Oven / Heating Cabinet Manufacturer: Binder Type: FD 53 Year of manufacture: 2014 Made in Germany Drying oven / heating cabinet with forced air circulation for laboratory, research, quality assurance, material testing, and industrial applications. Technical data Internal volume: 53 liters Temperature range: approx. +5 °C above ambient temperature to 300 °C Internal dimensions (W x H x D): approx. 400 x 400 x 340 mm Kjdpfx Aezcwxzeg Uodn External dimensions (W x H x D): approx. 635 x 620 x 690 mm Load per shelf: 15 kg Maximum total load: 40 kg Empty weight: approx. 44 kg Power connection: 230 V Frequency: 50 / 60 Hz Rated current: 5.3 A Rated power: 1.2 kW Protection class: IP20 Equipment Forced air circulation system Digital temperature display Electronic temperature control Safety temperature limiter according to DIN 12880 Stainless steel interior Multiple shelf levels Robust laboratory design Inspection / Calibration DGUV V3 inspection performed on: 28.07.2023 Calibration performed on: 28.07.2023 Inspection and calibration stickers are attached to the device. Condition Used equipment. Device can be switched on, temperature display is active. Signs of wear and tear due to age and use. Optical condition as shown in the pictures. Scope of supply: see pictures. The table shown in the pictures is not included in the sale. Shipping possible. Errors and omissions excepted.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. Kdsdpfx Aozbxwiog Ujn The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Kedpfxjzbxvlj Ag Uedn Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Gantner ISM 112 Intelligent Sensor Module SN: 085055, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Kdodpfx Agjy Np Ucj Usn

Condition: ready for operation (used), Sensor Instruments L-LAS-TB-16x1-R-CL laser through-beam line sensor 47/16 04078-R, used, in good condition, 100% functional, scope of delivery as shown in the photos. Kdsdpox Eugisfx Ag Usn

Condition: ready for operation (used), Sensor Instruments L-LAS-TB-16x1-T-CL laser through-beam line sensor 04078-T, used, in good condition, 100% functional, scope of delivery as shown in photos. Kdjdjx Eug Aspfx Ag Uon

Condition: new, KISTLER 4618A0 amplifier + 4067A2000 SN 1804719 sensor, unused in opened original packaging, 100% functional, scope of delivery as per photos Kdjdpfjy Srpujx Ag Ujn

Condition: ready for operation (used), Sensor Instruments L-LAS-TB-16x1-R-CL laser transmission line sensor 29/16 03819-R, used, in good condition, 100% functional, scope of delivery as shown in the photos. Kodex Eugcepfx Ag Uodn

Condition: ready for operation (used), Sensor Instruments L-LAS-TB-16x1-R-CL laser through-beam line sensor 47/16 04079-R, used, in good condition, fully functional, scope of delivery as per photos. Kodpfx Aox Eugpsg Uodn

Condition: new, Hübner HEAG 164-15 amplifier SN: 1555756 + ACC 93 sensor SN: 1555751 ,unused, 100% functional, scope of delivery according to photos Ksdei Ea Rvspfx Ag Uodn

Condition: ready for operation (used), Sensor Instruments L-LAS-TB-16x1-T-CL laser through-beam line sensor 47/16 04077-T, used, in good condition, 100% functional, delivery as per photos. Kedox Eugvjpfx Ag Usdn

Condition: ready for operation (used), Sensor Instruments L-LAS-TB-16x1-T-CL Laser Through-Beam Line Sensor 47/16 04079-T, used, in good condition, 100% fully functional, delivery as per photos. Kdodpsx Eug Njfx Ag Usn

Condition: ready for operation (used), ipf PT700523 / 50115802 Laser Sensor SN: 13070501 68 009, used, good condition, 100% functional, scope of delivery as per photos Kdjdpfop Illwox Ag Ujn

Condition: new, Banner Q45UR3LIU64CQ6K Analog Q45R Remote Ultrasonic Sensor Kit, unused in original box, 100% functional Kedpfsi D T Epox Ag Uodn

Condition: new, Hübner HEAG 164-15 amplifier SN: 1555755 + ACC 93 sensor SN: 1555750 ,unused, 100% functional, scope of delivery according to photos Kdjdei Ea Rropfx Ag Uon

Condition: new, Balluff BDS 21MR05-NT-PU-05-SA5 Inductive sensor,unused in opened original packaging, 100% functional, scope of delivery according to photos Kjdpfx Aji D T Dveg Usdn

Condition: new, Rexroth 0 608 PE1 460 Inductive sensor , serial no. according to photo ,unused, 100% functional, scope of delivery according to photos Kdjdpfxsi Ecn Ho Ag Usn

Condition: new, Renishaw SA26DBA115B05S Sensor , serial no. according to photo ,unused in original box, 100% working, scope of delivery according to photos Ksdpfxoi Ecm Tj Ag Usdn

Condition: ready for operation (used), Matsushita NAIS ANL2535E LM Laser Analog Sensor ,used, normal signs of wear, 100% functional, scope of delivery according to photos Ksdei Eb A Rspfx Ag Ujdn

Condition: new, Hübner HEAG 164-15 amplifier SN: 1555759 + ACC 93 sensor SN: 1555754 ,unused, 100% functional, scope of delivery according to photos Kjdpfxoi Ea R Do Ag Ujdn

Condition: like new (used), ifm distance sensor O1D100-01DLF3KG Like-new optical distance sensor for precise distance measurement in industrial automation and handling applications. Manufacturer: ifm electronic Type: Optical distance sensor Model: O1D100-01DLF3KG Series: O1D Measurement principle: PMD Time-of-Flight Light source: Laser Protection rating: IP67 Kodpfx Agszduuue Uedn Output: Switching output Output: Analog output Electrical connection: M12 connector Housing material: Metal/plastic Application: Distance measurement Application: Position detection Application: Presence detection Application: Automation technology Condition: Like new Quantity: 5 pieces available