Used Captive Bolt for sale (1,867)

Condition: used, clear span: 2,700 mm, total length: 2,860 mm, total width: 1,050 mm, total height: 3,800 mm, Technical data for the pallet racking system: Gksdez Ndd Hjpfx Akhed Racking system: Jungheinrich Type: Delta Technical data for installation: Number of racking rows: 1 unit Length per racking row: approx. 2,860 mm Number of bays / racking row: 1 unit, each 2,700 mm Number of levels including base level: 3 units Included in the scope of delivery: 02x Pallet racking uprights, used Material color: blue Profile dimensions: 80 x 55 mm Including cross and diagonal bracing, upright protectors and base plates The uprights are pre-assembled (welded framework) Height: 3,800 mm Depth: 1,050 mm 06x Pallet racking beams, used Material color: yellow Box profile: 120 x 50 mm Beam type: HN 120x30 Connector: 3 HK (hooks) Clear width: 2,700 mm 12x Safety pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 08x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 04x Shims, used Material: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, loading space length: 190,000 mm, loading space width: 30,000 mm, loading space height: 8,150 mm, total width: 30,000 mm, Equipment: ABS, Goldhofer STZ-H6-57/80A Telescopic Lowboy Trailer for Railcar Transport                                 Approval          Technical 1 Speed:     80 km/h               65 km/h Fifth wheel load:               23,000 kg             26,000 kg Rear axle load:       10,000 kg             11,000 kg Total weight:     83,000 kg             92,000 kg Payload:                 52,500 kg             61,500 kg Tare weight (without accessories):         30,500 kg Gooseneck: Length: 4,000 mm Width: 2,480 mm Height: 235 mm Fifth wheel height: 1,350 mm DLR front: 1,420 mm DLR rear: 2,700 mm Kingpin: 3.5 inches Inclination: inclined 10 degrees Front corners: inclined 45 degrees Decking: Spruce 50 mm Fifth wheel supports: mechanical Width with sideboards: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically raisable and lowerable with mechanical support tube and hydraulic support cylinders Hydromechanical forced steering (2-circuit steering) in a low-profile design (height 235 mm) with adjustable guide elements and THP steering cylinders. Loading platform: Type: Platform Ratable: No Length: 13,000 mm Width: 3,000 mm Decking: Steel sheet/Spruce 50 mm Wheel wells: No Extensions: No Extendable: single-telescopic Length 1: 10,000 mm Loading heights (loaded) Loading height 1: 815 mm Extendable loading platform, designed as an outer and inner tube construction, with a fixed loading platform section of 1,070 mm in length at the front. Bolt-tab coupling integrated into the fixed loading platform section for connecting railcar bridge extension beams; the welded track rails serve as a rail track in the gauge widths of 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension stages by spring accumulator cylinders and conical bushings. Loading platform height on the frame center tube (outer tube) approx. 815 mm (+/- 130 mm) Gkodpfx Akeyfvypshsd Loading platform height on the embedded rail elements approx. 790 mm (+/- 130 mm) Rear suspension: Suspension type: Standard Loading height loaded: 815 mm Width: 3,000 mm Track width: 1,360 mm Decking: Steel sheet Extensions: No Wheel wells: No Excavator well: No Axles: Number of axles: 6 Lift axle: see accessories Axle type: Curved steering knuckle Axle equalization: Hydraulic Axle manufacturer: BPW/Eco Riding positions: 1 Axle stroke (1) +/-: 130/130 mm Axle stroke (2) +/-: 0/0 mm Raise/lower valve: Yes 1st axle pneumatically liftable with lift bellows Steering: Number of steering axles: 6 Steering axle arrangement: all steered Maximum steering angle: 45° degrees Steering type: Hydraulic 2-circuit Tires: Dimension: 235/75 r 17.5 143/141 J Tire type: Twin Rim type: Disc Rim centering: Center-centered Brake code: according to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS connection spiral: No Parking brake: Spring accumulator EBS: No ECAS: No Note: Brake calculation No.: GH 4324S Suspension note: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow transverse outriggers in between (aluminum covers see above Accessories) Controls protected on the left in the direction of travel...

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis - New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel plate with sliding mechanism and self-lubricating features (Type Jost JSK), mounted on the subframe ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Body: Crane interchangeable system: The body including the crane can be disassembled, and a fifth wheel plate is then mounted on the chassis. The function of the crane and body including the fifth wheel plate is also possible. The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally. A crawler track would also be available, net price is €149,900. ? Assembly/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed body as a steel/welded construction, removable ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed body painted. Color: RAL (chassis color) ? Removable aluminum side boards, manufacturer Suer, height 600 mm, anodized design with steps, removable stake pockets. ? Standard flatbed floor with welded 4 mm steel tread plate, painted in RAL (chassis color) ? 6 recessed lashing points 2500 daN each side, in slot profile with flexible arrangement. ? 4 x lashing points for chains 6500 daN (2x front and 2x rear on the body) ? Sturdy front wall consisting of a welded frame, welded 4mm steel sheet and 5 accessory hooks, front wall height approx. 1300 mm, steel design, painted, with 2 foldable eyelets for lashing straps, welded on. ? Cladding sheets, fenders made of aluminum tread plate (sandblasted, powder-coated and painted) ? Multifix stake pocket, 2 rows with a distance from the front and rear of approx. 80 cm. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection device at the rear and on the additional support, with installation of hydraulic and electrical connections. Gjdpfjy Hm Eyjx Akhjkd ? Duomatic and red/yellow connections, at the front for semi-trailers and also at the rear for trailers. ? New crane, type FASSI F545 RA 2.27 with continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hyd. extensions. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating manual, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front wall ? 2 x rotating beacons on the FH roof ? 2 x FLASH lights in the bonnet ? 2 x LED under the body at the rear, each on the left and right, arrangement to be agreed. ? 4 x LED AS, 2x on the left and 2x on the right under the body in the area of the support legs, mounted. ? 4 x yellow LED light strips, 1x mounted on each support. Further information is available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel with sliding mechanism and self-lubricating (Type Jost JSK), mounted on the auxiliary frame ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Superstructure: Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel is then mounted on the chassis. The crane and superstructure, including the fifth wheel, can also be used together. The vehicle has a total of two fifth wheels, each of which can be moved longitudinally. A crawler would also be available, net price is €149,900. ? Mounting/bolting of the crane and main support beam to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed design as a removable steel/welded structure ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized version with steps, removable Kinngripp stanchions. ? Standard flatbed floor with welded 4 mm steel diamond plate, painted in RAL (chassis color) ? 6 recessed lashing eyes 2500 daN each side, in slot profile with flexible arrangement. ? 4 lashing brackets for chains 6500 daN (2 at the front and 2 at the rear of the superstructure) ? Sturdy front panel consisting of a welded frame, welded 4 mm steel sheet and 5 accessory hooks, front panel height approx. 1300 mm, steel version painted, with 2 foldable loops for lashing straps, welded. ? Sheathing panels, mudguards made of aluminum diamond plate (sandblasted, powder-coated and painted) ? Multifix stanchion pockets, 2 rows, spaced approx. 80 cm from the front and rear. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection at the rear and the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow couplings, at the front for semi-trailers and at the rear for trailers ? New crane, type FASSI F545 RA 2.27 endlessly rotating, fully mounted, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI crane manufacturer. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating instructions, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front panel ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on each side, arrangement to be agreed. Gkjdpfx Akjy Hm Etohsd ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available on request.

Condition: good (used), Technical data for the pallet racking system: Racking system: Bito Type: PRO Technical data for the installation: Number of racking bays: 01 unit Length per racking bay: approx. 25,500 mm Number of fields/racking bay: 09 units, each 2,700 mm Number of levels including base level: 02 units Included in the scope of delivery: 10x Pallet racking uprights, used Material color: Sendzimir galvanized Profile dimensions: 120 x 76 x 2.5 mm Including cross and diagonal bracing, upright protectors and base plates The uprights are pre-assembled (bolted truss) Height: 2,400 mm Depth: 1,100 mm 36x Pallet racking beam, used Material color: yellow Box profile: 150 x 50 mm Beam type: PT150M Connector: 5 hooks Gkodpfx Ajz Hiq Tjkhjd Clear span: 2,700 mm Max. load per beam pair 4,000 kg, with evenly distributed load 72x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 40x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 20x Shimming plate, used Design: fully galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on field and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us, depending on the delivery location or scope.

Year of construction: 1992, condition: like new (used), machine/vehicle number: Div1, Technical data: 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Gedpfx Ajng H T Uokhokd Dispatch by forwarding agent or pick-up only by appointment

Condition: used, Technical details: Gkjdpfx Akju Nlfijhed diameter: 250 mm passage: 80 mm width: 80 mm weight of the machine approx.: 23 kg dimension L-W-H: Ø 250 x 130 mm 4 jaw chuck with flange - width of the main body 80mm - with clamping jaws for internal /external - flange size Ø 250 x 18 mm, thread 4 x M16 ; pitch circle of the bolts = Ø 170 mm Other 3- and 4-jaw chucks and face plates in stock. Please inquire! *

Condition: used, Year of construction: 2013, Technical details: band width: 600 mm voltage: 460 / 60 V / Hz total power requirement: 3,5 kW Gsdpou Nupdefx Akhokd weight of the machine approx.: 2300 kg dimension machine xH: ca. 9,0 x 1,4 x 3,0 m hinged type chip conveyor, as good as new With coolant tank incl. pump (submersible centrifugal pump) Delivery rate 250 l/min. = sufficient for a conveying height of 25m Chip insertion length (A) 3000mm (attachment with sheet metal tray with rubber coating 3000 x 1100mm) Total insertion length 5000mm Belt width (H) 600mm Discharge height (C) above floor 1800mm The chip conveyor has 4x swivel wheels underneath and can be fixed to the floor with bolts. *

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 454, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching ETP ST32-10-I06 bolted joint. Technical specifications: Gkedpfx Akjulaxzshod Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: ETP ST32-10-I06, year of manufacture: 2022 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 58,985 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 385 mm, overall weight: 3,500 kg, number of axes: 2, Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm "44 SPINDEL ERROS 3" - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine. Turning Length: Approx. 335 mm (Z-travel approx. 385 mm) - Turning Diameter: Max. turning diameter approx. 280 mm - Swing Diameter: Approx. 550 mm - Number of Turrets: 1 turret, 12-position drum turret (Bolt-on type) - Tool Holder / Mounting: Mazak block mounting (Bolt-on), various tool adapters and tool holders included - Tailstock: Available (Programmable) - Main Spindle: Without C-axis - Main Spindle Speed: 6,000 rpm - Spindle Nose: A2-5 - Spindle Bore: Approx. 61 mm - Main Drive Power: Approx. 11 / 7.5 kW - Bar Capacity / Pass-Through: Ø 51 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included): Various tool adapters and holders, clamping equipment, Hainbuch clamping technology - Chip Conveyor: None - Documentation: Available - Demonstration Status: Operational under power (after warm-up phase) - Known Defects: Spindle fault Alarm "44 SPINDEL STÖRUNG 3" - Machine must warm up before machining, then operational. Estimated repair cost approx. 2,800 EUR. - Machine Weight: 3,500 kg (7,700 lbs) - Main Circuit Voltage: 3AC 400 V 50/60Hz - Control Circuit Voltage: AC 100V / DC 24V - Max Main Motor Voltage: 400 V Technical Specification Gksdpsz Rxg Hjfx Akhjd Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, CNC control: HEIDENHAIN iTNC 530 (HSCI) with a 15.1" flat-screen display and a pivoting control panel 2. Work table / Clamping surface Length: 2,200 mm Width: 1,000 mm Maximum transport load: 7,200 kg Number of T-slots: 7 Size of T-slots: 22 H12 mm Reference slot: 22 H7 mm T-slot spacing: 140 mm 3. Automatic milling head (Option -AIH60A OIL) Design: Diagonal, swiveling in 2 planes Speed range: 0 – 6,000 rpm (Option) Gjdpfxez Tugbs Akhjkd Tool holder: DIN 69871 AD (ISO 50) / Taper DIN 69871 Draw bolt: DIN 69872 Form A Tool clamping force: 15,000 N Lubrication: Automatic grease cycle lubrication (housing made of steel cast GS 60, designed for 45 kW and max. 2,000 Nm) 4. Main spindle drive motor / Manufacturer: Siemens, main spindle drive, Type: 1PH7 Drive power max. (Option): 36 kW from 376 rpm (standard equipment 30 kW) Maximum torque (Option): 930 Nm (constant up to 376 rpm; optional in gearbox up to 1,460 Nm or 1,750 Nm) Speed control / Gearbox: 3-stage (oil-cooled) with automatic switching and helical gears made of hardened chrome-nickel steel Spindle speeds (6,000 rpm Option): Low range: 0 – 984 rpm Medium range: 918 – 2,456 rpm High range: 2,404 – 6,000 rpm 5. Axis drives and axis feeds Axis drive motors: Manufacturer Siemens (digital AC drives) Rapid traverse max. (X/Y/Z axis): 15,000 mm/min Working feed max. (X/Y/Z axis): 12,000 mm/min Feed force max. (X/Y/Z axis): 24,000 N Measuring system: Linear measuring system “Heidenhain” (0.001 mm) in all axes Machine weight: approx. 17,000 kg Connection power: approx. 54 kVA Materials: Machine bed, work table, machine frame and vertical slide made of lamellar graphite cast iron GG30; milling slide made of nodular graphite cast iron GJS-600 Guide rails: Hardened and ground with Turcite B sliding strip coating (in X/Y/Z) Hydraulic system: Manufacturer Rexroth (including hydraulic weight compensation in the vertical axis) Lubrication & cooling: Automatic central lubrication of axes/ball screws, control cabinet with lighting and air conditioning unit Additional control: Portable electronic handwheel “Heidenhain HR-410” with axis selection, additional electric foot pedal for manual tool change Enclosure & Safety: 4-sided splash guard enclosure with large sliding doors, safety switches (CE compliant) and safety fencing for the rear.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2018, total width: 2,550 mm, total height: 980 mm, Equipment: ABS, Krone ZZB18eLZ Dolly, Mega or standard axle, actively steered axle, SAF axles, 23,000 km, large Wabco Trailer Smart Board, first owner, like new. Technical description: Frame as a double T-longitudinal beam with welded cross members, fifth wheel coupling, mounted on a turntable, overall height approx. 185 mm, underrun protection according to EC regulations. Drawbar for steered axle with bolted 50mm or 57.5mm drawbar eye, length when coupled low 4,150 mm, extendable by 4x100 mm, length when coupled high 3,500 mm, extendable by 3x100 mm (center of drawbar eye to center of fifth wheel plate). Front support with crank and gear. Actively steered dolly axle, low maintenance with disc brakes (430mm), offset 120, air suspension with lifting and lowering device, 1 valve, center hole centering. Tires: 4, size 445/45 R 19.5, manufacturer according to Krone's choice. Wheel covers according to EC directives 78/549/EEC and 91/226 EEC with corresponding splash protection device, black plastic mud flaps as quarter panels with upper tarpaulin cover, at the rear with mud flaps. Gedpfj Agw Ncjx Akhokd Braking system according to ECE-R13, including vehicle stabilization function, spring brake parking brake, EBS system, 2S/2M, 2 sensors on one axle, diagnostics via ISO7638 connector (EBS supply cable), Palm coupling connections, brake connections for trailer on a strip in the frame. Lighting and signaling system according to ECE-R48, two 7-pole sockets DIN1185/3731, license plate, outline and side marker lights in LED design, multi-function tail lights including 1 rear fog light and 1 reversing light, electrical connections for trailer on a strip in the frame, connection cable for electrical and air connections (trailer). Steel parts shot-blasted, KTL-primed and powder-coated, standard paint finish (single-color), underrun protection and lighting carrier powder-coated in white, axles including wheel hubs in RAL 9005, components in black or galvanized, rims in silver, contour marking according to ECE-R48. Despite the greatest care, errors in the advertisement cannot be ruled out. Errors and prior sale are reserved!

Condition: used, first registration: 04/2025, Year of construction: 2025, Equipment: ABS, Kögel MEGA S24 MEGA, lift axle on the 1st axle, lifting roof, Vario Loch-FIX frame, BPW axles, pallet stop strips left and right, sliding curtain sides, sliding roof cover, toolbox, 1st owner, as new condition. Permissible kingpin load: 12,000 kg Technical possible kingpin load: approx. 12,000 kg Permissible axle load: 24,000 kg (8,000 kg per axle) Technical possible axle load: approx. 27,000 kg (9,000 kg per axle) Permissible total weight: 36,000 kg Technical possible total weight: approx. 39,000 kg Unladen weight, basic equipment: approx. 6,130 kg Unladen weight, individual configuration: approx. 6,582 kg Theoretical payload: approx. 29,418 kg Floor load capacity according to DIN EN 283 with test axle load 7,200 kg (A) Wheelbase: approx. 6,390 mm (A1) Axle spacing: approx. 1,310 mm (A2) Axle spacing: approx. 1,310 mm (D) Overall length: approx. 13,950 mm (E) Overall width: approx. 2,550 mm (F) Internal loading length: approx. 13,620 mm (G) Internal loading width: approx. 2,480 mm (G2) Rear through-loading width: approx. 2,480 mm Tire size: 445/45R19.5 (H1) Loading height unladen, driving position level: approx. 1,020 mm (H2) Loading height laden, driving position level: approx. 990 mm (H3) Achievable dock height at rear with kingpin height 910 mm, loaded, raised: approx. 1,200 mm Ride height set to 265 mm. (K) Side through-loading height, internal: front approx. 2,735 mm - 2,860 mm [adjustable by 5x25 mm], rear approx. 2,810 - 2,860 mm [adjustable by 1x50 mm] (K1) Height under roof, internal: front approx. 2,875 mm - 3,000 mm [adjustable by 5x25 mm] | rear approx. 2,950 mm - 3,000 mm [adjustable by 1x50 mm] (X1) Overall height unladen, driving position level: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment (X2) Overall height laden, driving position level: = H2 + K + T +/- body height adjustment Superstructure settings: The “Mega” superstructure design allows a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, lateral through-loading height, internal height) change accordingly depending on the selected body setting. (T) Roof construction height, side: approx. 180 mm. Due to the design of the roof beam, the internal pallet-width height corresponds to the specified internal height under the roof. (N) Front overhang (according to ISO 1726): approx. 1,685 mm (N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm (O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm (P) Construction height above king pin: approx. 90 mm (S) Possible kingpin height unladen: approx. 930 - 1,060 mm, horizontal at approx. 930 mm (Pay attention to overall height!) Gkjdpfx Aks Agw N Sohsd Braking system in accordance with ECE-R13 Electrical system in accordance with ECE-R48 Wabco brakes, air suspension BPW triple-axle assembly ECO Air with disc brakes Ø 370 mm, ET 120, 260 mm air suspension stroke. 6 x 445/45 R 19.5 tires Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in the direction of travel Vario Fix steel-perforated outer frame with 3 pairs of stanchion sockets Mechanical/hydraulic lift mechanism, lift height from lowest position approx. 500 mm/600 mm, 4 operating levers at each corner stanchion. Complies with safety regulations according to BGV D 29. (Lifting roof can only be operated with doors open!) Load securing certificate according to EN 12642 XL (VDI 2700). Road transport only. "Daimler load securing DL 9.5" certificate

Condition: used, maximum load weight: 27,020 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/2009, loading space width: 2,480 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Construction description* Manufacturer: Schwarzmüller, Type: X303 / X-Series * 3-axle semi-trailer, vehicle class O4 * High-quality steel frame welded construction * Wheelbase 1,310 / 1,310 mm * Overall length approx. 13,840 mm * Overall width approx. 2,550 mm * Overall height approx. 4,000 mm * Fifth wheel height approx. 1,200 mm * Distance from kingpin to center of 1st axle: 6,440 mm * Track width front and rear: 1,950 mm each * 12 pairs of recessed lashing eyes according to UVV * 2 mechanical support winches at the front * Rear impact protection * 2 chock blocks * Retractable drawbar hook at the rear * Plastic mudguards * Aluminum combination rub rail * Steel underrun protection * Lateral impact protection * Spare wheel holder * Plastic toolbox * Rear marker boards Chassis* Air suspension low-loader unit * Low-maintenance drum brake axles * Lifting and lowering device * 3 axles with single tires * Tires 235/75 R17.5 140J * Steel rims 6.75 x 17.5 inches Braking system* Two-line compressed air braking system * With automatic load-dependent brake force control * With ABS and EBS * Operating pressure 6.5 bar * Spring-loaded parking brake * Parking brake on the 2nd and 3rd axles Floor* Wooden floor made of spruce, laid lengthwise with tongue and groove * Screen-printed top layer with flush outer frame Gksdpfez S R R Hex Akhod Body and sliding tarpaulin* Fixed aluminum hollow profile front wall * Front wall with aluminum corner posts * Bolted rear portal with aluminum corner posts * Double doors at the rear * 6 sliding center posts * 4 rows of locking slats * Bilateral plastic sliding tarpaulins * Strap reinforcement with direct tensioning buckles * Front and rear rod tensioning closure * Tensioning gear at the front * Eccentric locking mechanism at the rear * Edscha sliding tarp system "LITE" * Bilateral aluminum special guide rail profile * Light-transmitting plastic tarpaulin roof Electrical system* 24-volt electrical system * 7-chamber tail lights * Design according to EU directives Paintwork* Steel grit blasting * Zinc dust primer * Painting with 2-component commercial vehicle acrylic paint * Color of chassis and body: Gray Weights* Technically permissible total weight: 39,000 kg * Permissible total weight according to vehicle data sheet: 34,000 kg * Permissible payload according to vehicle data sheet: 27,020 kg * Unladen weight according to vehicle data sheet: approx. 6,980 kg * Fifth wheel load: 12,000 kg * Axle load: 3 x 9,000 kg

Condition: used, empty load weight: 8,786 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2023, loading space length: 13,403 mm, loading space width: 2,460 mm, loading space height: 2,700 mm, loading space volume: 89 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2023, Equipment: ABS, Unladen weight: 8786 kg, Permissible total weight: 38000 kg, Cargo space (L W H): 13,403 mm x 2,460 mm x 2,700 mm, Tire size: 385/65 R22.5, Cargo space volume: 89 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Anti-jackknife device, Front liftable axle, Pallet box, Electronic Braking System (EBS), Fire extinguisher holder, Spare wheel holder (2x), Bolted chassis, Container doors, Temperature recorder, Axle mileage counter, 1x15 and 2x7 pin connection socket, Anti-splash guard, International customs seals, Aluminum rims. You can find an overview of all our available vehicles on our website. Do you need financing? We offer customized financing options, as well as full-service or telematics services. We will be happy to advise you personally. Gkedpfsz Sv T Hsx Akhjd

Condition: good (used), We are selling our steel grain silo. Godpfx Ake Afbnnohjkd The silo consists of 2 halves and is bolted together in the middle. Diameter 1.50 m, height 2.50 m. Outlet and inlet are available.

Condition: used, mileage: 82,060 km, power: 345 kW (469.07 HP), first registration: 04/2025, axle configuration: 3 axles, next inspection (TÜV): 04/2027, color: black, emission class: euro6, Equipment: ABS, crane, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. * Chassis height: LOW, please refer to VBI/WIS for exact height measurements (depending on tire size) * Hydraulically steered trailing axle with electronic control * Single-tire Globetrotter safety cab, wheelbase 5,600 mm * Exhaust emissions: Euro 6, with SCR, particulate filter and exhaust gas recirculation, Euro 6 emission level * Diesel engine 12.8 l, 469 hp / 345 kW, 2,346 Nm; diesel engine 12.8 l with turbocompound charger, 469 hp / 345 kW, 2,652 Nm * Volvo Engine Brake+ (VEB+) * Braking performance: 430 kW / 585 hp (D13T / TURBO-TC) * Complies with ADR braking regulations. * I-Shift AT2612, automated 12-speed transmission (direct gear), max. input torque: 2,652 Nm * Liftable rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t * Tires 295/60R22.5, drive axle ratio 2.47:1 * 1 fuel type: Diesel * Auxiliary heater * Cab * 2 kW LED main headlights * Automatic headlight leveling * Disc brakes, solid discs on steering axle EBS * Electronic braking system * Medium package, rear air suspension * 630 L aluminum tank, right side, D-shape, 560 mm high, 2030 mm long * AdBlue tank, usable capacity 48 liters * 560 mm high trailer coupling crossmember with D-value = 190 kN for G-150/G-260 * Trailer coupling bolt pattern, Ringfeder RF4040A G-150 * Front axle tires 355/50R22.5, rear axle tires 295/60R22.5 * Trailing axle tires 355/50R22.5 Gjdpo Agqp Rsfx Akhokd * Auxiliary drive PTR-DH (fast), gearbox side * Connection: 1 DIN, rear for pump, I-Shift * Driving modes: Standard, Performance, and Economy * Radio reception: AM/FM and DAB/DAB+ (analog & digital) * Load/axle load display in the vehicle display. * I-Park Cool (integrated stationary air conditioning with automatic temperature control) 1723BLAC Conger black * 4 spotlights on the VOLVO roof bar * 1 unit, container platform body in low-profile design, internal platform dimensions: approx. 6,300 x 2,480 x 1,800 mm * MKG loading crane HLK 531HP a5 basic unit with lifting and pivoting arm, hydraulic five-stage extension, max. reach extended 14.25 m * Incl. warning horn, outreach/load capacity: 4.35 m / 10,530 kg, 5.90 m / 7,660 kg, 7.85 m / 5,640 kg, 9.90 m / 4,390 kg, 11.95 m / 3,590 kg, 14.10 m / 3,030 kg, lifting arm angle +20° * Electronic crane management system ACS3 * Radio remote control 4-channel, type Scanreco * Special paint in RAL 9005 black * Hydraulic adjustable pump, type Bosch-Rexroth 107 l/min, for direct mounting on auxiliary drive

Condition: used, mileage: 241 km, power: 129 kW (175.39 HP), first registration: 05/2026, fuel type: diesel, empty load weight: 3,720 kg, maximum load weight: 1,780 kg, overall weight: 5,500 kg, tire size: 225/75 R16, axle configuration: 2 axles, wheelbase: 3,780 mm, next inspection (TÜV): 05/2027, color: blue, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 2, loading space volume: 15 m³, loading space length: 3,630 mm, loading space width: 2,230 mm, loading space height: 1,855 mm, Equipment: air conditioning, cruise control, differential lock, parking heater, trailer coupling, CERTIFIED PRE-OWNED Premium, color: Orient blue, body manufacturer: Schutz, unladen weight: 3720 kg, permissible total weight: 5500 kg, cargo space (L W H): 3,630 mm x 2,230 mm x 1,855 mm, 1st axle: 225/75 R16, seats: fabric, leaf spring suspension, 2 x airbag, trailer coupling: hook, electronic stability program ESP, comfort seat driver/passenger: static, driver's seat height adjustable, armrest driver/passenger, automatic driving lights, radio, digital radio reception DAB, USB connection, hands-free Bluetooth, reversing camera, rain sensor, multifunction steering wheel, adjustable steering column, electric windows, outside temperature display, fog lights, exterior mirrors electric and heated, tire pressure monitoring system, immobilizer, central locking with remote control, tinted glass, underrun protection: deep at the rear, twin tires, spare wheel, daytime running lights, connection plug 1x13-pin, cup holder, cornering lights, start-off warning, turning assistant: right, attention assistant, digital instrument cluster, speed limiter: 90 km/h, traffic sign recognition, black box event data recorder, roof storage above windshield. Preparation for digital tachograph according to EC standard 4.1. Preparation for alcohol interlock. Blind spot radar behind the cab. Battery disconnect switch in the cab. Grab handle on A-pillar. Settings for special fuels (HVO/GTL). Protection for oil pan. Differential lock on drive axles switchable. Longitudinal differential lock. Front axle differential lock. Protection for lightweight body type SWK. One-piece 3 mm steel sheet floor bolted to the underbody. Front and side walls made of 30 mm sandwich panels with high-strength foam core. Sliding fan arranged diagonally. Roof made of 30 mm sandwich GRP. 1 row of partially recessed combination lashing rails. Extendable 5-step rear stairs. Additional battery. For inquiries, Jan Furtak is at your disposal. Tel. Errors and changes excepted. Sale only to business customers. Errors and changes excepted; AWD Gkedpfxs Aht Iyj Akhod

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225 (lift2move) Serial No. 19153-HD, Year of manufacture 2010 Type No. Rated load capacity 225 kg Lifting stroke 1770 mm Lifting height 2350 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting arm 400 mm Chassis length 1130 mm Ground clearance 90 mm Underrun length 600 mm Chassis design (front / rear) Ø 80 / 150 mm (2 fixed / 2 swivel casters) Overall length 1130 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually movable, swivel casters with three-stage parking brake - Handlebar infinitely adjustable in height Gedpsflt Egefx Akhjkd - Load receiving flange according to EXPRESSO standard 380 x 50 mm / 4 mounting holes M10 at a distance of 100-120-100 mm Mounted lifting attachment: Quadruple lifting fork, Expresso type, load capacity of the lifting attachment 40 kg - Lifting attachment can be swivelled by 90° by hand (can only be locked in the 0° position) - Lifting attachment can be moved laterally by +-100 mm on linear guide (locking only in the center) - Width between the support arms 320 mm - Height between the support arms (height can be locked at) 365 / 400 / 450 mm (max. opening width without locking hole 510 mm) - Depth between the support arms 150 mm to the stop bolt / 300 mm maximum Total weight 100 kg Good condition

Condition: new, Year of construction: 2026, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm Gksdpfx Ajr Eli Tskhsd -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2015, power: 90 kW (122.37 HP), nominal power: 90 kW (122.37 HP), rotational speed (min.): 1,480 rpm, rotational speed (max.): 1,480 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 156 A, type of input current: three-phase, overall weight: 692 kg, total length: 1,035 mm, total width: 557 mm, total height: 695 mm, torque: 580 Nm, type of cooling: air, protection type (IP code): IP55, No. 10040 Three-phase motor Simotop / Techtop T3CR 280M-4 / 90 kW / 1480 rpm Unused, year of construction 2015, in new condition Three-phase asynchronous motor Output 90 kW at 50 Hz 4-pole, speed 1480 rpm Voltage Δ/Y 380/660 V or 420/720 V at 50 Hz Rated current 156.1/89.9 A or 141.3/82.4 A Power factor cos φ 0.92 Rated torque approx. 580 Nm Can be operated in delta on a 400 V supply, therefore suitable for star-delta starting Also suitable for 60 Hz 90 kW at 400/690 V and 1770 rpm 108 kW at 480/830 V and 1780 rpm Efficiency class IE3, efficiency 95.2% Protection class IP55 Insulation class F Duty type S1 continuous operation Cooling method IC411, totally enclosed fan-cooled (TEFC) PTC thermistors for winding protection IEC standard motor, frame size 280M, shaft height 280 mm Mounting type IM B3, foot-mounted with bolted-on feet Foot hole spacing 457 x 419 mm, 4 holes Ø 24 mm Shaft end Ø 75 x 140 mm with 20 mm key Grey cast iron housing, colour RAL 7024 graphite grey Ball bearings SKF 6316 ZZ C3 on both ends Terminal box on top, cable entries 2x M50x1.5 and 1x M16x1.5 Motor dimensions approx. 1035 x 557 x 695 mm LWH Transport dimensions approx. 1200 x 800 x 900 mm LWH Weight approx. 692 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Gedpfe Afbxgox Akhokd Delivery terms: ex location

Condition: good (used), pneumatic power chuck Gkedpfx Aksdm Htpjhjd Manufacturer: Forkardt Type: UVE 200 - 50 - J5 KKG 5 Bolt circle diameter: 105 mm Taper: 80 mm Overall diameter: 280 mm Diameter of hollow spindle: 50 mm Overall height with jaws: 200 mm Weight: 47.5 kg

Condition: used, RS Simulators Type: KKM 40 / 45 S Manufacturer: RS Simulators, water-cooled The chamber can be disassembled into 3 parts for transport (bolted together). Temperature range: -30°C to +100°C Refrigerant: 20 kg R-404A + 20 kg R-452A External dimensions: approx. width 3920 mm, depth 7350 mm, height 2600 mm Test chamber dimensions: approx. width 3500 mm, depth 5400 mm, height 2110 mm Electrical data: 68 kW rated power Voltage: 3x400V/PE, Current: 135A For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Godpfxozgablo Akhekd Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have by phone.

Condition: used, Technical data for the pallet racking upright: Racking system: META (Thyssen) Type: Multipal S Included in delivery: 1x pallet racking upright, used Material color: Sendzimir galvanized Upright type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Includes horizontal and diagonal braces and base plates The uprights are pre-assembled (bolted frame) Gedpfxez I Scnj Akhokd Height: 2,200 mm Depth: 1,100 mm General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, clear span: 2,700 mm, load per truss pair (max.): 2,400 kg, Technical data for the pallet racking system: Racking system: META Thyssen Type: Multipal S Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 30,720 mm Number of bays per racking row: 11, each 2,700 mm Number of levels including base level: 2 Technical data for the volume: Pallet spaces per bay: 9 Gsdpfx Akez I Tnfjhskd Number of pallet spaces per row: 99 Total number of pallet spaces: 99 Based on: Load handling unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): approx. 800 kg Included in the scope of delivery: 12x pallet racking uprights, used Material color: Sendzimir galvanized Profile dimensions: 85 x 75 x 2.00 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) 2,000 mm high 1,100 mm deep 44x pallet racking beams, used Material color: yellow Profile dimensions: 100 x 50 mm Beam type: HN100|20 Agraffe: 3 HK Clear width: 2,700 mm Max. load per beam pair: 2,400 kg, with evenly distributed load 88x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 48x bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 24x leveling shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 1x load sign With information on bay and rack load capacities, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.