Used Car Baler for sale (8,583)

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF500LH is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 500 kg. Due to the compact design and low height this baler is perfect for rooms with limited ceiling heights. The waste baler impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 500 kg (material depending) Bale size: 1100 H (var.) x 1400 W x 800 D mm Machine size: 2249 H x 2041 W x 1350 D mm Machine weight: 2100 kg Transport height: 2249 mm Loading aperture: 1400 W x 680 H mm Cycle times: 35 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Laedpfx Ajvugzfjl Njc Noise level: 68 dB Auto control panel with bale full light and E-stop with locking key Strap eject for easy removal of bales Retainer for reducing the material spring back Low height, perfect for limited ceiling heights Hour counter Reel holder for 6 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Cans and PET bottles Light valuable materials Optional extras Machine colour RAL Strapping rolls Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF200MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 200 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 16 Ton Bale weight: up to 200 kg (material depending) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine size: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Loading aperture: 1100 W x 800 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 8 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Laodevugz Eepfx Al Njc Twin Chamber Waste Baler, Multi Chamber Waste Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF60 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 60 kg. With a can crush insert baler is even suitable for crushing individual sheet metal and plastic containers and also cans. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Laodpovah Epofx Al Noc Bale weight: up to 60 kg (material depending) Bale size: 800 H (var.) x 700 W x 500 D mm Machine size: 1996 H x 1040 W x 720 D mm Machine weight: 260 kg Transport height: 1996 mm Loading aperture: 700 W x 492 H mm Cycle times: 24 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Retainer for reducing the material spring back Reel holder for 2 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional extras Machine colour RAL Can crusher insert PLC auto compaction cycles with bale full light and E-stop with locking key Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 450 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3000 H x 1781 W x 1196 D mm Machine weight: 1300 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the material Lsdpfxsvamafo Al Njac User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Motor 11 kW 32 Amp Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: good (used), Manufacturer: Comp Type: SB5 Lsdpfxoh Eic Ae Al Neac Motor: 2.2 kW Stroke length: 500 mm Chamber size: 500 x 350 x 400 mm

Condition: like new (used), Year of construction: 2024, functionality: fully functional, pressing force: 30 t, Used Bramidan B30 baler. Newly repainted. Ready for use, fully equipped, in perfect working condition. New oil. Laedpfxsviymwo Al Njc

Condition: used, Year of construction: 2012, pressing force: 4 t, HSM V-Press 504 waste paper baler - used The HSM V-Press 504 vertical baler is a compact yet extremely efficient device designed for pressing cardboard and plastic waste. Thanks to its robust construction, simple operation, and modern control system, this model is the ideal solution for manufacturing companies, warehouses, stores, and logistics centers where significant amounts of packaging waste are generated every day. The baler, manufactured by the German brand HSM, ensures reliable operation and a long service life. Key advantages of the waste paper baler: 40 kN crushing force – effective waste compression, reducing volume by up to 95%. Efficiency and ergonomics – the crushing process starts automatically when the door is closed, and the piston returns to its starting position automatically. Modern control system – a microprocessor with a membrane keyboard and graphic text display ensures easy monitoring of the work process. Double door with lever – safe and convenient operation even with intensive use. Compact bales up to 60 kg – facilitate transport and storage of processed waste. Integrated bale ejector – increases operator safety and comfort. Energy-efficient operation – 1.1 kW motor allows for full functionality with low energy consumption. Stable, durable construction – guarantees reliability over a long service life. The offer applies to the HSM V-Press 504 waste paper baler: • Product code: MTP006524 • Product condition: used • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Lasdpfxjyim Ayo Al Njc Net price: €2,859.00 per unit * I have large quantities available, with the possibility of negotiating the price for larger orders. * Transport possible throughout Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 00034717-00-0010-01, No reserve price – guaranteed sale to the highest bidder! The original purchase price of the system was 93,000 EUR! Washing system with the following configuration: - Recycled water system (QU00370) - Articulated arm assembly (QU01210), clearance height 2,250 mm - SENSOFIL + (QU01410), clearance height 2,250 mm - Roof roller splash guard (QU00142) - Wheel washing unit with brush & linear technology (QU00151) - Side high-pressure system (QU00152), 2 RD, 1 overflow: 20 l/min, 85 bar - Side high-pressure system (QU00169), 8 OD, 1 overflow: 40 l/min, 50 bar - Active foam applicator (QU01500) - Special wax application unit (QU01530) - Emergency stop device front left (QU00320) - Emergency stop device front right (QU00330) - Emergency stop device rear left (QU00340) - Emergency stop device rear right (QU00350) - Positioning device, LED, fixed, left (QU00388) - Positioning device, LED, fixed, right (QU00389) - Fresh water system separation, pipe separator (EZ00000) - Energy supply chain (EZ00020) - Operating terminal, VARIO-L, wall-mounted (EZ02500) - Wheel guidance rails (EZ00700) - Signs DIN A3 - Documentation, PWA, standard, DE - VDA conformity certificate, PWA, DE - Initial chemical set, PWA Electrical data: Rated voltage: 400 V Ljdpfx Aeyx U D Usl Nsac Mains connection: 3/N/PE Frequency: 50 Hz Power consumption: 19.0 kW Rated current: 38 A

Condition: new, Year of construction: 2021, total length: 2,770 mm, Tugger Club Car Precedent Lodjxpx Szopfx Al Njac Drive Electric Year built 2021

Condition: used, Year of construction: 2020, total length: 2,770 mm, Tugger Club Car Tempo Ljdpfx Aoxpx N Tsl Noac Drive Electric Year built 2020

Condition: used, Year of construction: 2020, total length: 2,100 mm, Tugger Lodpfsxpx Uiex Al Noac Club Car Tempo Drive Electric Year built 2020

Condition: new, Year of construction: 2022, total length: 2,800 mm, Tugger Club Car Club Car Drive Electric Year built 2022 Lodpexpx Trofx Al Noac

Condition: used, Year of construction: 2020, total length: 2,100 mm, Tugger Club Car Tempo Drive Electric Year built 2020 Laodpoxpx Txefx Al Noc

Condition: good (used), mileage: 333,182 km, power: 162 kW (220.26 HP), first registration: 03/2020, fuel type: diesel, tire size: 225/75R17,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, total length: 6,580 mm, total width: 2,550 mm, total height: 2,680 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Manual - Auxiliary drive - Pump - Radio/cassette - Rear view camera - Lane keeping assist - Fabric - Blind spot sensor = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 6425 kg, Gross vehicle weight: 8800 kg, Total tank capacity: 200 liters, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 2 tons, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Red, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Flashing lights, Engine power: 162 kW (217 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 6, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, BOTTIE CAR TOWNING LIFT 8 TONS = Further Information = Transmission Transmission: ZF, 6 gears, Automatic Lodpfszfvynex Al Nsac Axle Configuration Tire size: 225/75R17.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 9 mm; Tire tread depth right: 10 mm; Suspension: Leaf spring suspension Axle 2: Dual tires; Tire tread depth left inside: 4 mm; Tire tread depth left outside: 6 mm; Tire tread depth right inside: 4 mm; Tire tread depth right outside: 5 mm; Suspension: Air suspension Weights Tare weight: 6,425 kg Payload: 2,375 kg GVW: 8,800 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €643 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 406,235 km, power: 207 kW (281.44 HP), first registration: 02/2020, fuel type: diesel, tire size: 245/70R19,5, axle configuration: 4x2, wheelbase: 5,180 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,550 mm, total width: 2,550 mm, total height: 3,310 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Halogen lamp - Hydraulic system - Short cab - Manual - Auxiliary drive - Pump - Radio/cassette - Reversing camera - Lane keeping assist - Fabric - Winch = Notes = Number of axles: 2, Configuration: 4x2, Twin tires, Payload: 5530 kg, Tare weight: 6460 kg, Gross vehicle weight: 11990 kg, Total tank capacity: 250 liters, Tow hitch, Unbraked trailer load: 750 kg, Middle axle trailer load, braked: 5729 kg, Axle pin diameter: 40 DIN, Winch, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Yellow, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Lane keeping assist, Engine power: 207 kW (278 Hp), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Starter battery, Pump, Number of seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: ZF, 12 gears, Automatic Axle Configuration Tire size: 245/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 10 mm; Tire tread depth right: 10 mm; Suspension: Leaf suspension Axle 2: Twin tires; Tire tread depth left inner: 8 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 6 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Weights Unladen weight: 6,460 kg Payload: 5,530 kg GVW: 11,990 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damages: Damaged vehicle (not roadworthy) Number of keys: 2 Financial Information Leasing price: €843 per month (default, 60 months); Ask for more information and conditions Identification Registration number: 78-BPH-9 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices Ljdoxmrqrjpfx Al Nsac • We speak many languages • We understand our customers • Support for import and transport • (Export) registration can be arranged quickly • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), axle configuration: 3 axles, total length: 5,760 mm, total width: 2,300 mm, total height: 600 mm, Year of construction: 2019, Carrying capacity: 2.595 kg GVW: 905 kg Technical condition: very good Visual appearance: very good Production country: DE Lajdpjzdz Smefx Al Noc Please contact Vink Machinery for more information Hukco Terrax-3 * 2019 * Internal dimensions 3.95x1.8x0.25 meters * 2595 kg payload * High pressure tires

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Lodjzdn H Ropfx Al Nsac Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Laodpfx Aljzdny Re Njc Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Laodpfxozdnxgj Al Nec Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, mileage: 444,242 km, power: 162 kW (220.26 HP), first registration: 12/2000, fuel type: diesel, wheelbase: 4,300 mm, fuel: diesel, fuel tank capacity: 200 l, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro2, total length: 7,050 mm, total width: 2,520 mm, total height: 2,790 mm, loading space length: 6,110 mm, loading space width: 2,450 mm, Year of construction: 2000, Equipment: ABS, EBS, air conditioning, cruise control, electric window regulation, onboard computer, power assisted steering, = Additional options and accessories = Lodjzf Nm Uepfx Al Njac - Disc brakes - Sliding roof - Central lubrication system = Further information = Number of cylinders: 6 Engine displacement: 5,480 cc Unladen weight: 6,600 kg Payload: 8,400 kg GVW: 15,000 kg Please contact Vitali Lenda for further information.

Condition: good (used), mileage: 460,302 km, power: 176 kW (239.29 HP), first registration: 04/2008, fuel type: diesel, tire size: 265/70R17,5, axle configuration: 4x2, wheelbase: 4,860 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 8, emission class: euro4, suspension: steel-air, total length: 8,700 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 5,200 mm, loading space width: 2,430 mm, Year of construction: 2008, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, power mirror, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Manual - Auxiliary drive - Pump - Radio/cassette - Sleeper cab - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8359 kg, Gross vehicle weight: 11990 kg, Total tank capacity: 140 liters, Tow hitch, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of differentials: 1, Winch pulling force: 350 tons, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Red, Heated mirrors, Lighting type: Halogen lamp, Flashing lights, Engine power: 176 kW (236 Hp), Fuel: Diesel, Euro: 4, Transmission type: Manual, Gears: 8, Clutch pedal, Power steering, ABS, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Crane, Crane manufacturer: Terex 65.2 - A 2 L, Crane year of manufacture: 2008, Crane lifting capacity: 6000, Maximum load: ?, Number of outriggers: 2, CE-certified, Control position: Right-hand side control, Crane position: Behind the cab, Sliding: 2, Hydraulic additional connection: none, Load hook, HYDRAULIC RAMPS // ATLAS 65.2 A2L WITH REMOTE // MANUAL GEARBOX 8+1 // AIRCO // 6 CYL. = Additional Information = Axle configuration Tire size: 265/70R17.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 3 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Weights Unladen weight: 8,359 kg Payload: 3,631 kg GVW: 11,990 kg Functional Crane: Terex 65.2 - A 2 L, Year of manufacture 2008, behind the cab Laodpszcvf Tsfx Al Noc Height of loading area: 107 cm Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: used, mileage: 1,572 km, power: 265 kW (360.30 HP), first registration: 06/2026, fuel type: diesel, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: beige, gearing type: automatic, emission class: euro6, total length: 9,600 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Roof spoiler - Remote central locking - Lift axle - Air suspension - Radio - Sun visor - Toolbox = Notes = New, unused truck. All-round air suspension. New, galvanized cargo bed. Hardwood floor. Recessed tie-down eyes. Hydraulic ramps. Hydraulic ramps can be slid against each other. Stainless steel boxes. Work lights. 3,500 kg trailer coupling. Cargo bed length: 725 cm. Cargo bed height: 107 cm. = Additional Information = Number of cylinders: 6 Unladen weight: 10,788 kg Payload: 15,212 kg GVW: 26,000 kg Model number: ACTROS 2536 6X2 / RAMP / MACHINE = Company Information = Laodszfy Ngjpfx Al Nec ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide accurate information, but no rights can be derived from the texts provided.

Condition: used, mileage: 332,384 km, power: 155 kW (210.74 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,820 mm, fuel: diesel, brakes: engine braking, color: yellow, gearing type: automatic, emission class: euro6, total length: 8,990 mm, total width: 2,400 mm, permissible axle load (axle 1): 4,400 kg, permissible axle load (axle 2): 8,100 kg, Year of construction: 2019, Equipment: ABS, central locking, cruise control, electric window regulation, power assisted steering, power mirror, tail-lift, traction control, Cab: double Max. front axle load: 4400 kg Max. rear axle load: 8100 kg Number of cylinders: 4 Engine capacity: 5.132 cc Empty weight: 6.965 kg Carrying capacity: 5.025 kg GVW: 11.990 kg Registration number: 87-BNL-5 = Additional options and accessories = - Air horn - Comfort seat with heating Ledpfx Aszf Hruol Njac - Flashing lights - Strobe lights - Work lights - Heated driver's seat - Heavy duty engine brake - Immobiliser - Outside temperature display - Radio/CD player - Rear air suspension - Spotlights - Suspension seat - Tool box stainless steel - Visor = Remarks = 6 Seat 2x Winch Brille Plateau length 575 cm

Condition: excellent (used), mileage: 1,211,015 km, power: 353 kW (479.95 HP), first registration: 01/2010, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,650 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 10,800 mm, total width: 2,600 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 8,330 mm, loading space width: 2,500 mm, Year of construction: 2010, General information Number of doors: 2 Cab: single Registration number: 53-BJV-3 Lodpfx Alezfwaio Njac Technical information Number of cylinders: 6 Engine capacity: 12.740 cc Axle configuration Max. front axle load: 9000 kg Rear axle 1: Max. axle load: 11500 kg Rear axle 2: Max. axle load: 7500 kg; Steering Weights Empty weight: 8.700 kg Carrying capacity: 19.400 kg GVW: 28.000 kg Max. towing weight: 31.500 kg Functional Height of cargo floor: 128 cm Extendable superstructure: Yes Maintenance, history and condition APK (MOT): tested until 03/2027 Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 325,653 km, power: 100 kW (135.96 HP), first registration: 12/2010, fuel type: diesel, tire size: 215/75 R16, axle configuration: 4x2, wheelbase: 4,250 mm, fuel: diesel, fuel tank capacity: 90 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro3, suspension: steel, number of seats: 3, total length: 7,770 mm, total width: 2,350 mm, permissible axle load (axle 1): 2,300 kg, permissible axle load (axle 2): 4,300 kg, loading space length: 5,700 mm, loading space width: 2,350 mm, Year of construction: 2010, Equipment: electric window regulation, power assisted steering, power mirror, = Additional options and accessories = - Beacon(s) - Radio CD player - Towbar 3500kg - Work lamp(s) = Remarks = Superstructure Construction year: 2010 = More information = General information Number of doors: 2 Cab: Vario, single Registration number: BX-TL-36 Technical information Number of cylinders: 4 Engine capacity: 4.249 cc Drivetrain Make of engine: Mercedes-Benz Axle configuration Tyre size: 215/75 R16 Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 2300 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40% Rear axle: Double wheels; Max. axle load: 4300 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90% Weights Empty weight: 3.790 kg Carrying capacity: 2.200 kg GVW: 5.990 kg Max. towing weight: 13.000 kg Functional Make of bodywork: Tijhof Height of cargo floor: 85 cm Extendable superstructure: Yes Maintenance APK (MOT): tested until 02/2027 Condition Technical condition: very good Visual appearance: very good Number of keys: 2 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data Ledpfx Alozf Ivno Neac We can also arrange financing for you within the Netherlands.