Used Car Baler for sale (23,108)

Condition: used, machine/vehicle number: 005934, Max. panel width: 2200 mm Max. panel length: 4200 mm Gisdswcydbspfx Abdel Max. panel stack height from the ground: 1000 mm Lifting capacity: 200 Kg Movement system: suction cups.

Condition: used, machine/vehicle number: 005941, Max. panel width: 1200 mm Max. panel length: 4200 mm Max. panel stack height from the ground: 1600 mm Lifting capacity: 100 Kg Movement system: suction cups. Gjdpfxswcycqs Abdjil

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Gedpfxsx Dnb Ue Abdsil Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, machine/vehicle number: 99xxxx, Year of construction: 1999, Please contact ATS Norway for more information Please provide reference number upon request: 20360 Specifications: - 1999 model - Eu-approved until: 07.08.25 - Tires (see pictures) - 3 axles - Lift on 2 axles - Net weight: 6520 kg - New bottom - Aluminum box - Floorboard - Ready for delivery Description: Gjdpexpdixjfx Abdoil We have a 1999 Maur 3 axle trailer for sale. Everything works as it should according to the owner. It is also Eu-approved until 07.08.25 Ready for delivery Technical approved: no EU-approved until: 07.08.2025 Own weight: 6520 Total Weight: 28000 Payload: 21480 Width: 255 Length: 885 Model: 3 akslet slephenger

Year of construction: 2002, condition: used, machine/vehicle number: 5713, - Manufacturer: Elmag Superfici Gisdpjx Url Usfx Abdjl - Type: TT1-30 - With cross carriage wheels - Length: 3,000 mm - Working width: 1,350 mm - Total width: 1,660 mm - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, The McIntyre M20 Baler is cost effective for cans and can also be used for many other applications where automatic volume reduction or product destruction is required. The M20 Baler will accept cans up to 250mm x 480mm and will produce up to 750kg of 20g aluminium drink cans per hour. When fed with aluminium drinks cans, these machines crush and lock the material together to produce dense 274mm cubes, weighing approximately 9 – 11kgs. Such dense bales means that no tying or strapping is needed. The cubes are simply ejected from the machine and are ready for transportation. Godpfx Abjwl I Hvsdoil

Condition: excellent (used), axle configuration: 2 axles, color: grey, Year of construction: 2010, Carrying capacity: 3.080 kg GVW: 420 kg Technical condition: very good Visual appearance: very good Brakes: oploop Giedjx Sau Sspfx Abdel Vehicle's outer dimensions: 5,75x2,2 Production country: NL Please contact Vink Machinery for more information Ultra-Lite machine transporter * 2010 * Loading floor dimensions: 410x160 cm * 420 kg net weight * 3080 kg payload * 2 adjustable ramps * 2 axles * Dutch registration

Condition: refurbished (used), Year of construction: 1992, operating hours: 3,998 h, functionality: fully functional, machine/vehicle number: 100175, We are selling a used Franke drum washing system for washing bulk goods, primarily for turned and milled parts. Facilities of the facility: Tanks made entirely of stainless steel 600 liter washing tank with 18 KW heating 600 liter flushing tank with 18 KW heating Insulation of both tanks Weekly timer for the heating Washing drum can be switched via rotary button, 360° rotation or standstill when washing and rinsing including speed sensor Exhaust fan with 900 m3/hr. Oil separator over large disc skimmer with pan and ball valve Gsdoqwnypjpfx Abdeil automatic water dosing / Geka coupling at the rear 2 washing baskets 530 x 300 x 200 mm with tension lid, mesh size 6x6 mm 50 kg load per washing basket Pneumatic door opening and switching from washing to rinsing To be attached to the front frame as a basket support with 4 M12 screws Drain taps for washing and rinsing tanks as well as two large maintenance hatches Good accessibility on all sides, 2 x folding doors at the front and the remaining side walls can be removed using quick-release fasteners Rexroth pneumatics Grundfos stator pump in the washing and rinsing tank 63 A Mennekes plug with 5 meter cable Rital control cabinet with accessories inside operation manual Machine ready for immediate use Delivery and commissioning possible after consultation and cost assumption If you have any further questions, please write or call

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned Gijdpex A U Ncsfx Abdol • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, machine/vehicle number: YS2R6X2000205xxxx, mileage: 669,167 km, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 21538 Specifications: 2011 model 669,167 km 480 hp 6x2 Automatic transmission Euro 5 Tires (see pictures) Containers Lift Heated mirrors Air conditioning/ac Light Radio Ready for delivery     Description: We have a 2011 Scania R480 Box truck w/ 2t lift for sale. The car has recently been EU approved and is in regular weekly use. A lift has recently been installed at the rear of the car, which increases its functionality. There is a minor coolant leak from the engine. Therefore, the coolant level should be checked daily before starting. According to the owner, the leak is minimal. Otherwise, the car works as it should. Ready for delivery Km: 669167 HK: 480 Giodpfx Abexm Sy Hodol Technical approved: Yes EU-approved until: 24.09.2026 Own weight: 10120 Euro: 5 Model: R480 Skapbil m/ 2t lift Gearbox: Automatic

Condition: excellent (used), mileage: 575,974 km, power: 132 kW (179.47 HP), first registration: 02/2014, fuel type: diesel, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2014, Equipment: AdBlue, = Additional options and accessories = - PTO (Power Take-Off) = Notes = WMAN13ZZ4EY312503 = Further information = Pump: Yes Technical condition: very good Optical condition: very good Please contact Sales for further information. Gijdpfx Ajwxmdgobdsl = Company information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber) MOB: Dutch (Available on WhatsApp and Viber). When paying by bank transfer, the funds must be transferred to our bank account below. Always check the payment details as listed on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, machine/vehicle number: WDB9700151K379268, mileage: 297,257 km, power: 112 kW (152.28 HP), first registration: 02/1999, fuel type: diesel, wheelbase: 4,220 mm, fuel: diesel, color: other, gearing type: mechanical, emission class: euro2, total width: 2,290 mm, Year of construction: 1999, Max. front axle load: 3200 kg Gsdsx Ttgdjpfx Abdeil Max. rear axle load: 4600 kg Number of cylinders: 4 Empty weight: 4.520 kg Carrying capacity: 2.970 kg GVW: 7.490 kg Registration number: BH-BP-66

Condition: used, first registration: 01/1994, axle configuration: 8x2, wheelbase: 6,750 mm, number of gears: 12, suspension: other, Year of construction: 1994, Equipment: differential lock, = Additional options and equipment = Gsdpfx Abovz S Ttodoil - PTO (Power Take-Off) = Additional information = Front axle 1: Steered; Suspension: Parabolic suspension Front axle 2: Steered; Suspension: Parabolic suspension Rear axle 1: Differential lock; Suspension: Air suspension Rear axle 2: Twin tyres; Lift axle; Suspension: Air suspension Number of cylinders: 8 Contact Jos Rietveld for more information.

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 9850, total length: 7,500 mm, overall weight: 900 kg, input voltage: 400 V, Equipment: documentation/manual, Sale of an LCT T 600 demonstration pass-through washing system from 2024 at a special price Zones of the pass-through washing system: Zone 1: Main washing zone: Gisdpfx Ajwpq Evebdjl Length: approx. 2600 mm Pump: 7.5 kW, 60 cbm/h Tank capacity: approx. 400 l Water heated with 3 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Zone 2: Rinse zone Length: approx. 2200 mm Pump: 3 kW, 33 cbm/h at 3 bar Tank capacity: approx. 350 l Water heated with 2 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Zone 3: Hot air drying zone: This serves for all-around mechanical air blowing (from below, the sides, and above) of the water droplets located on the surface of the washed goods, which are blown off by air knives and built-in high-pressure fans. The conveyor belt is equipped with a plastic belt. The frame is made of stainless steel 1.4301, has its own drive, and is controlled via the system’s PLC control. The conveyor belt brings the washed goods out of the machine, makes a 90° curve to the left, and then conveys the goods towards the machine entrance (where the items to be washed are placed on the machine). There are 3 photoelectric sensors at different points on the conveyor belt, equipped with special holders and mutually facing reflectors on the stainless steel structure. Belt width 400 mm / height up to 400 mm (At the beginning – 1 sensor before the curve, 1 sensor at the end, and 1 sensor approx. 2 m before the end) is a buffer zone (1-2 m long). As soon as the buffer zone is filled with returning washed goods, the machine and the conveyor belt stop automatically.

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Gijdoxpxhvspfx Abdjl Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation, see the function video for more information. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, mileage: 332,384 km, power: 155 kW (210.74 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,820 mm, fuel: diesel, brakes: engine braking, gearing type: automatic, emission class: euro6, total length: 8,990 mm, total width: 2,400 mm, Year of construction: 2019, Equipment: ABS, central locking, cruise control, electric window regulation, power assisted steering, power mirror, tail-lift, traction control, Cab: double Max. front axle load: 4400 kg Max. rear axle load: 8100 kg Number of cylinders: 4 Engine capacity: 5.132 cc Empty weight: 6.965 kg Carrying capacity: 5.025 kg GVW: 11.990 kg Gedex A U Tbopfx Abdeil Registration number: 87-BNL-5 6 Seat 2x Winch Brille Plateau length 575 cm

Condition: excellent (used), mileage: 485,108 km, power: 162 kW (220.26 HP), first registration: 04/2013, fuel type: diesel, wheelbase: 4,200 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, total length: 8,100 mm, total width: 2,410 mm, Year of construction: 2013, WMAN15ZZ2CY281972 5.58 x 2.38 m box dimensions = Further Information = Payload: 5,125 kg Pump: Yes Technical condition: very good Visual condition: very good For further information, please contact our Sales department. Gisdpfx Aouta Ulsbdjl = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: Nederlands - English - Deutsch - Français - Español - Italiano (Available on WhatsApp and Viber) MOB: Nederlands (Available on WhatsApp and Viber) When paying by bank transfer, the funds should be transferred to our bank account below. Always verify the payment details listed on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, mileage: 605,321 km, power: 310 kW (421.48 HP), first registration: 06/2018, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,250 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 10,900 mm, total width: 2,550 mm, loading space length: 8,600 mm, loading space width: 2,500 mm, loading space height: 900 mm, Year of construction: 2018, Equipment: AdBlue, Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Axle configuration Maximum front axle load: 7,500 kg Gedpfxex Tdfde Abdoil Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Max. axle load: 7,500 kg Weights Unladen weight: 11,645 kg Payload: 14,355 kg Gross vehicle weight (GVW): 26,000 kg Maintenance APK (technical inspection): valid until 06.2026 Further Information Please contact Martin Vos Vos, Martin Martin Vos or Martin Vos for more information. = Company Information = Hello

Condition: used, machine/vehicle number: YB1E5A112SB13xxxx, mileage: 190,000 km, Year of construction: 1996, Please contact ATS Norway for more information Please provide reference number upon request: 22117 Specifications: Gsdpfx Aex S Utpebdsil EU approved until 09.10.2026 Mileage: 190,000 km Transmission: Manual Good tires Capacity for 3 vehicles Services performed by owner Winch 4x2, 171 hp Rotating beacon bar Ready for delivery Description: 1996 Volvo FL6 car transporter.EU approved until 09.10.2026.Capacity for 3 vehicles. Km: 190000 HK: 171 Technical approved: Yes EU-approved until: 09.10.2026 Own weight: 6550 Total Weight: 11000 Payload: 4375 Width: 245 Length: 1070 Euro: 1 Model: 1996 Volvo FL6 bilfrakter. EU-godkjent. Gearbox: Manual

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Model: V-press 860 plus Year of manufacture: 2013 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 430 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening dimensions: 120 cm x 65 cm x 85 cm Condition: Very good! Functionality checked. Giedex S Excopfx Abdol FLITS Rental & Sales Service: Each machine comes with a bundle of baling wire (120 wires). Need additional bundles of baling wire? Request a free quote. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machinery for both businesses and private customers. We focus on providing efficient solutions for materials handling, cleaning, waste processing, and working at height. At FLITS Rental & Sales you will find a wide range of machines suitable for use in various sectors. Check our listings for: balers for efficient waste processing, electric pallet trucks/stackers for fast and safe materials handling, scrubber dryers for thorough and professional floor cleaning, forklifts in a variety of models suitable for different work environments. With FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. Do you have questions or would you like a free quote? Feel free to contact us. Waste baler, paper baler, cardboard baler, plastic baler, waste compactor, recycling, textile press, waste, waste processing

Condition: excellent (used), mileage: 177,033 km, power: 120 kW (163.15 HP), first registration: 10/2016, fuel type: diesel, tire size: 195/75R16, wheelbase: 3,670 mm, fuel: diesel, fuel tank capacity: 85 l, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: other, total length: 13,600 mm, total width: 2,300 mm, loading space length: 10,000 mm, loading space width: 2,300 mm, Year of construction: 2016, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, power assisted steering, power mirror, soot filter, traction control, General information Number of doors: 2 Cab: single Registration number: 010308 Technical information Number of cylinders: 4 Engine capacity: 1.968 cc Axle configuration Front axle: Tyre size: 195/75R16; Max. axle load: 2000 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Brakes: disc brakes; Suspension: leaf suspension Rear axle 1: Tyre size: 195/75R16; Double wheels; Max. axle load: 3500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Brakes: disc brakes; Suspension: leaf suspension Rear axle 2: Tyre size: 195/50R13; Max. axle load: 1800 kg; Tyre profile left: 100%; Tyre profile right: 100%; Brakes: drum brakes; Suspension: air suspension Rear axle 3: Tyre size: 195/50R13; Max. axle load: 1800 kg; Tyre profile left: 100%; Tyre profile right: 100%; Brakes: drum brakes; Suspension: air suspension Rear axle 4: Tyre size: 195/50R13; Max. axle load: 1800 kg; Tyre profile left: 100%; Tyre profile right: 100%; Brakes: drum brakes; Suspension: air suspension Giodpfewu Dqijx Abdjl Weights Empty weight: 1.890 kg Carrying capacity: 4.920 kg GVW: 3.500 kg Max. towing weight: 6.400 kg (unbraked 750 kg) Functional Make of bodywork: VW Condition Technical condition: very good Visual appearance: very good Additional information Please contact Moussa or Youssef for more information Video working vehicle: Neat Volkswagen Crafter 2.0TDI BE Combi Semi-trailer: AWB BE Knikker Rack trailer/car transporter with articulated system Husky Superwinch with radio control Air springs adjustable in height at the rear GVW 3500 KG (BE driving license) Total train weight: 8750 KG Load capacity: 4920 KG Length of loading platform: 10 m Width: 2.30 m 177,000 KM demonstrable

Condition: used, mileage: 586,000 km, power: 355 kW (482.67 HP), first registration: 08/2019, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,000 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 9,430 mm, total width: 2,550 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, tail-lift, Max. front axle load: 8000 kg Rear axle 1: Double wheels; Max. axle load: 11500 kg Rear axle 2: Lift axle; Max. axle load: 7400 kg; Steering Number of cylinders: 6 Engine capacity: 12.902 cc Empty weight: 12.253 kg Carrying capacity: 14.647 kg GVW: 27.000 kg Registration number: 91-BZF-7 Gijdpfex Tht Ejx Abdjl Steering lifting axcle Dimmensions LxW 800x250

Condition: good (used), Leutenegger (Starrag) wash box Technical specifications Bath contents: approx. 0.9 m3 Chemistry: Henkel P 3 Voltage: 3x400V / 230V 50 Hz Supply line: 40A Control voltage: 24 V DC Temperature max: 50 ° C Heating electric Heating power: 3x3.25 kW = 9.75 kW Working pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m3 / h Shipping costs on request Gjdjd Nlybopfx Abdsil More articles - new and used - can be found in our shop! International shipping costs on request

Condition: new, Year of construction: 2025, functionality: fully functional, Stainless steel cleaning system for cleaning and rinsing pipes, heat exchangers and coolers. pipes, heat exchangers and coolers. Deposits in pipes, heat exchangers, radiators, cooling channels or other systems can lead to malfunctions or production downtime. The solution is regular cleaning of the systems with the pipe and heat exchanger cleaning system RWR. Made entirely of stainless steel, the RWR cleans and flushes the systems on the basis of circulation flushing. This saves time and money, as time-consuming assembly and disassembly work is no longer necessary. Giedpou R Tmqjfx Abdsl disassembly work is no longer necessary. Even complicated pipe geometries can be cleaned quickly and be cleaned quickly and effectively. We have designed different systems to meet the various requirements for optimum removal of deposits from from the systems: All systems are mobile (stainless steel trolleys), robust and equipped with many technical details. RWR - system solution for pipes, heat exchangers and temperature control units RWRDB - system solution for vacuum WC pipe and container cleaning in trains RWR-Frischwasser - system solution for cleaning pipes and fresh water tanks in trains RWR-KS - System solution for cleaning the cooling channels of plastic injection molds

Condition: used, mileage: 586,000 km, power: 355 kW (482.67 HP), first registration: 08/2019, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,000 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 9,430 mm, total width: 2,550 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, tail-lift, Max. front axle load: 8000 kg Rear axle 1: Double wheels; Max. axle load: 11500 kg Rear axle 2: Lift axle; Max. axle load: 7400 kg; Steering Number of cylinders: 6 Engine capacity: 12.902 cc Empty weight: 12.253 kg Carrying capacity: 14.647 kg Giodpjxzufnofx Abdel GVW: 27.000 kg Registration number: 91-BZF-7 Steering lifting axcle Dimmensions LxH 800x250