Used Carousel Shelf for sale (1,563)

Condition: good (used), clear span: 2,700 mm, total length: 14,010 mm, total width: 1,100 mm, total height: 2,900 mm, load per truss pair (max.): 2,100 kg, Technical data for the pallet racking system: Racking system: META Thyssen Type: Multipal S Technical data for installation: Number of racking rows: 01 Length per racking row: approx. 14,010 mm Number of bays per racking row: 05, each 2,700 mm Number of levels, including the base level: 04 Technical data for capacity: Pallet spaces per bay: 09 Number of pallet spaces per row: 45 Total number of pallet spaces: 45 Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): approx. 700 kg Included in the scope of delivery: 06x Pallet racking uprights, used Material color: Sendzimir galvanized Profile dimensions: 85 x 75 x 2.00 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Dwodoz I Tthepfx Al Sec 2,900 mm high 1,100 mm deep 20x Pallet racking beam, used Material color: yellow Profile dimensions: 100 x 50 mm Beam type: HN100|20 Agraffe: 3 HK Clear width: 2,700 mm Max. load per beam pair: 2,100 kg, with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shim plate, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), functionality: fully functional, Windmill Press Stromab ST 2500 Max working length: 2500 mm Max working height: 1200 mm Dwsdpfxsy Spfye Al Ssc 6 material pressing cylinders 3 frontal cylinders

Condition: used, Nedcon pallet racking, approx. 3.1 meters in length, used 🧰 Product features • Manufacturer: Nedcon • Color: blue • Condition: used, see pictures • Frames: 2 units, pre-assembled, 500 x 105 cm • Frame width: 10 cm • Beams: 8 units with 290 cm clear span • Safety: 16 units of zinc-plated safety pins • Fasteners: 8 units of Hilti concrete anchors • Load capacity: 2,000 kg per level Dwsdpey D Nybsfx Al Ssc • Bay load: 12,000 kg • Shelf inserts included! 💰 Price: €440 net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment We have over 5,000 meters of pallet racking in stock from numerous manufacturers (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & used & new heavy-duty racking Description: Are you looking for high-quality storage racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 meters of racking promptly available • 20,000 m² of storage platforms & steel platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND FOCUS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, hassle-free package: 1. Flat-rate purchase: purchase of merchandise, equipment & complete stock including broom-clean clearance. 2. Commission auction: conducting auctions on behalf of customers. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and broom-clean handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Technical data: Number of pistons: 6 Piston diameter: 80 mm Connection to central heating (CO) Shelf dimensions: 3000x1300 mm Clearance: 395 mm Dwedpfxoyz T Ans Al Soc Hydraulic pressing 6 pneumatic side clamps Safety switch Motor power: 1.5 kW Power supply: 400 V Overall dimensions: Length: 3650 mm Width: 2100 mm Height: 2040 mm

Condition: used, We are offering used shelving systems for sale here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: Used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 pcs Boltless assembly Usage: single-sided Material: Galvanized steel PRICE €270.00 net (1 starter bay + 4 add-on bays) €321.30 gross incl. VAT Tiered pricing Starter bays: 1 - 5 pcs: €70.00 net each 6 - 20 pcs: €66.63 net each 21 - 50 pcs: €63.25 net each from 51 pcs: €59.88 net each Add-on bays: 1 - 5 pcs: €50.00 net each 6 - 20 pcs: €47.50 net each 21 - 50 pcs: €45.00 net each from 51 pcs: €42.50 net each Large quantities available ex-stock. YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann Dodpfx Ajy Hqr Rjl Sswc TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly. This item is available for collection. Delivery or shipping is available at an additional charge. Additional costs depend on the delivery location and shipment size and can be provided upon request. PROJECT PLANNING Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly. PAYMENT TERMS Payment terms are to be agreed upon order placement. Prices are quoted per item/net price or as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT. ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine platforms, textile storage, as well as machinery for trade, industry, and crafts. We regularly offer attractive used equipment from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us. Four wins – The success modules of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: used, ONLY BEAMS for Stow pallet racking: Beam sizes: 2900*120 mm 3600*140 mm 1800*80 mm 3500*145 mm 2700*80 mm 1900*120 mm 4400*160 mm 3700*160 mm If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking, as well as accessories, and will be happy to assist you with your planning. Other accessories available include: Frame, corner, and end protectors, push-through guards, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Djdshryh Hepfx Al Sewc Please request shipping costs by providing your postal code, location, and the desired quantity of items. Other service offerings: Planning, racking installation/disassembly, purchase/sale Changes and errors in technical data, information, and prices, as well as sales subject to prior sale!

Condition: good (used), total length: 60,000 mm, total height: 2,500 mm, 60 linear meters of SSI Schäfer R3000 shelving system, including shelf inserts 📋 Consisting of: • 47 x pre-assembled frames / approx. 250cm high / 80cm deep / new • 184 x grid shelves / 128cm long / 80cm deep / 200 kg load capacity / used • 16 x cross braces • Color: galvanized, gray • Condition: very good, see photos 💰 Price €7,290.00 net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, Europe-wide • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10129 We constantly have over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description text: Are you looking to buy high-quality storage shelving? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). Djdpfxery Ucvs Al Sswc ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer truckloads of goods processed weekly for maximum selection 📦 OUR RANGE (BUY AFFORDABLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a complete all-round package: 1. Flat-rate purchase: purchase of merchandise, equipment & complete inventory, including complete clearing. 2. Commission auction: carrying out auctions on behalf of the client. Our full service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and complete clearing. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Year of construction: 2025, Pallet racking, 2 – 7 m high, crossbeams/traverses available in lengths of 1.80 m / 2.70 m / 3.60 m, 1,000 kg per pallet – Brand New – Prices ex works / per unit (net)! Sale / Transport from Serbia is only practical if your order volume fills a full or nearly full truckload! Dwsdpfx Aeu Spu Tsl Ssc Delivery times upon request. CE certification available Frame depth: 1.10 m Frame bracing: bolted Location: Serbia Frames: NO. DESCRIPTION SIZE (mm) THICKNESS (mm) WEIGHT (kg) UNIT EUR 1 Vertical frame 2000*1100 2.00 30.00 €46.50 2 Vertical frame 2500*1100 2.00 37.50 €58.00 3 Vertical frame 3000*1100 2.00 45.00 €70.30 4 Vertical frame 3500*1100 2.00 52.50 €82.70 5 Vertical frame 4000*1100 2.00 60.00 €93.00 6 Vertical frame 4500*1100 2.00 67.50 €105.40 7 Vertical frame 5000*1100 2.00 75.00 €117.75 8 Vertical frame 5500*1100 2.00 82.50 €128.20 9 Vertical frame 6000*1100 2.00 90.00 €140.50 10 Vertical frame 6500*1100 2.00 97.50 €152.90 11 Vertical frame 7000*1100 2.00 105.00 €164.30 Beams: NO. DESCRIPTION SIZE (mm) THICKNESS (mm) WEIGHT (kg) UNIT EUR 1 Beam 150*50*3600 2.50 29.60 €46.00 2 Beam 120*40*2700 2.00 15.50 €24.40 3 Beam 120*40*1850 2.00 11.10 €17.90

Condition: used, 318 linear meters of Bito P5 pallet racking Dwsdpstut Iqefx Al Sjc Used item in very good condition, see pictures. Height 9 m Depth 110 cm, galvanized Field load 16000 kg Beam length 3.6 m, blue Beams with load capacity/bay 4000 kg Negotiable price: €36,950 net ex warehouse Offer includes: + 87 units of pre-assembled frames, depth 110 cm, height 9 m + 688 units of beams, length 3.6 m, 4000 kg load capacity/bay + 1376 units of safety locking devices + 348 units of concrete anchors Used corner protectors are immediately available, surcharge per piece €15 net! Other accessories such as tension plates, shelf inserts, etc. are available upon request. Load capacity signs, documents, etc. are included. Further accessories can be found in the accessories catalog. Goods are in stock. Transport and assembly are possible upon request. Inspection is possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our general terms and conditions, all prices excl. VAT ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty shelving used & new Description text: Are you looking for high-quality warehouse shelving to buy? Lenox Trading, with around 100 employees, is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY AFFORDABLY ONLINE): Whether pallet racking, heavy-duty shelving, high-bay racking, shelving for IBC containers, or shelving for tires – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete warehouse stocks incl. complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full service through our own employees: Cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete clearance. Whether you became aware of us through heavy-duty shelving or are looking for heavy-duty shelving galvanized / heavy-duty shelving system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights. Dwedpfx Alemhhypj Soc

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm Dwedjmhh Anopfx Al Ssc - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Dwjdemhh Dzjpfx Al Sjc Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Frame: 7000*1050 mm 105 EUR/piece (53 pieces) Beams: 1800*100*50 mm 2400 kg/level 10 EUR/piece (315 pieces) If you need shelving or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems and accessories and are happy to assist you with your planning. Additional accessories available, such as: Frames, corner and collision protection, push-through guards, chipboards, mesh shelves, back mesh panels, depth supports. Shipping: Please enquire about shipping costs by providing your postal code, city, and the desired item quantity. Dedpfx Aouf Snael Sswc Other services offered: Planning, rack assembly/disassembly, purchasing/sales Subject to changes and errors in technical data, information and prices, as well as prior sale!

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. Dsdpsguk Dkefx Al Sowc The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Dsdpfx Aleguk Dvs Sewc Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: used, 10 linear meters of shelving rack, Schäfer R3000, used 📋 Consisting of: • 9 x frames, pre-assembled / approx. 250cm high / 60cm deep / new • 32 x shelves / 122cm long (special size) / 60cm deep / 150 kg load capacity / used • 3 x cross bracing • Color: galvanized, gray • Condition: very good, see photos 💰 Price €770,- net, excluding VAT. • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P1115 Constantly over 5,000 linear meters of pallet racking in stock from numerous manufacturers (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racks to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology throughout the DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel structures immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racks, tire racks, or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly, and assembly. 🏭 TOP BRANDS, USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racks (Elvedi cantilever racks, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a comprehensive, worry-free package: Dwedpfeq Abnvsx Al Sjc 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock, including thorough cleaning and removal. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service, performed by our own employees: cataloging, office preparation, inspection, goods release, logistics, dismantling, and thorough cleaning and handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), Compartment divider, SSI Schäfer R3000, TRF 4510 for shelves 0.50m deep - second-hand - : = Price per piece ex location: 2.-€ (net), dismantled, packed and loaded! Djdpfx Ajqmnc Usl Sowc Minimum purchase: 100 pieces Manufacturer: SSI Schäfer Series: R3000 Type: TRF 4510 Year of manufacture: unknown For shelves Dimensions: approx. 1m x 0.50m For shelves 40mm high Version with plastic plugs Partition height: 10cm Condition: good Available: from approx. beginning of December 2023 Location: Munich

Condition: excellent (used), Year of construction: 2014, 727 USED rotary oven for 60x40 sheet metal, electric. Year of production: 2014 The oven consists of two parts: a rotary oven and a shelf oven - a chamber with a hert (stone) slab. 1. Rotary oven for 60x40 sheet metal, electric. EXTERNAL DIMENSIONS (in cm): - W: 100, - L: 120+23, - H: 230. TECHNICAL DATA: - Number of shelves, levels: 10. - Power: 16 kW - The oven has a steaming function. 2. Oven - baking chamber Dwjdpfx Alertqz Hs Sjc EXTERNAL DIMENSIONS (in cm): - W: 60, - L: 80, - H: 17. TECHNICAL DATA: power 12 kW + 6 kW (steaming) The USED device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN.

Condition: reconditioned (used), modernized machine with new LTG-StoreControl P control system 2 identical machines available External dimensions: Overall height 4340 mm Dodpfsdnh R Hox Al Sjwc Overall width 3270 mm Overall depth 1680 mm 26 supports for 250 kg payload each in the clear usable dimensions: H = 215 mm W = 2730 mm D = 620 mm Chain pitch 254 mm intermediate shelves are available for 0 load units, allowing for a payload of 120 kg per usable level intermediate shelves can be manufactured upon request Storage table at a height of 900 mm above floor level - V2A stainless steel countertop Color: Grey / Grey Surface cleaned, signs of use and minor deformations possible Motor power, drive: 2 x 1.5 kW / 400 Volt Subject to errors, technical changes, or minor deviations in the illustrations Photos of a similar machine Assembly currently mainly in Germany, Austria, and some neighboring countries

Condition: good (used), Automatic drawer warehouse is the ideal system for the vertical storage of steel bars and profiles with lengths of 3 m, 6 m and 12 m, heavy accessories, semi-finished products, components, molds and long material in general. The capacity per load unit ranges from a minimum of 5000 kg to a maximum of 6000 kg. Dedpfsvvlntsx Al Sswc

Condition: used, Shelf press Tiger 1000x2200 19/26 Djdpfx Ajzkh H Rjl Sswc

Condition: excellent (used), Two well-maintained Kardex Megamat RS 350 machines from 2013 are available for sale. The Kardex Megamat RS 350 is one of the world’s most popular vertical carousel systems. It belongs to the same model series that is still available on the market today. Both machines have been used in a clean environment and have undergone regular maintenance. Each machine features: Carrier width: 3,250 mm Shelf depth: 428 mm 41 carriers These machines offer high storage capacity while occupying very little floor space. They are ideal for fast picking and compact storage of small to medium-sized items. The machines can be purchased individually or as a set of two. Technical Specifications Model year: 2013 Model: MEG RS 350.1.3250.4.305.41 Machine height: 6,985 mm Machine width: 3,875 mm Machine depth: 1,471 mm Djdpfozvqkcjx Al Sswc Number of carriers: 41 Number of shelves: 0 Maximum carrier height: 270 mm Carrier width: 3,250 mm Carrier depth: 428 mm

Condition: used, Year of construction: 1991, The Tetra Pak TBA 9 is a type of filling machine designed for the aseptic packaging of liquid food products. Here are some key details: - Type of Packaging: The TBA 9 is known for its ability to handle a variety of liquid products, such as juices, dairy, and sauces, using Tetra Pak's carton systems. - Capacity: This filler typically has a capacity range suitable for small to medium production lines. It can fill various carton sizes, including the 200 ml format. - Aseptic Technology: The TBA 9 uses advanced aseptic technology to ensure that products are safely packaged without the need for preservatives, extending shelf life while maintaining product integrity. - Features: - High efficiency and low waste during the filling process. - Flexibility to switch between different carton formats and sizes. - User-friendly interface for easy operation and monitoring. Dwsdpfx Alsz Hrnne Sec - Applications: Ideal for products that require long shelf life and minimal refrigeration, making it popular for juices, milk, soups, and other liquid foods. This TETRA PAK TBA 9 carton former and filling machine with an aseptic chamber is used for long life products. Previously this machine was used to fill chocolate milk in Cartons of 200 ml. The line consists Tetra Brick Aseptic 9 200 ml filler Tetra Straw Applicator 21 Tetra Pak Shrink Wrapper and bundler The line is still installed and will be dismantled upon request or the buyer can send there own team to dismantle Working Hours: 5,809 Hours Format: 250 ml slim Version: v 100 Condition: Good Shrink Wrapper: Mariani Closer and bundler: IPF Conveyors: Included

Condition: used, Year of construction: 2002, The Fogg Monoblock Filler is a type of packaging machine designed for filling and capping bottles, typically used in industries like beverages, pharmaceuticals, and cosmetics. Here’s a brief description: Features: - Monoblock Design: Combines filling and capping processes in a single machine, enhancing efficiency and reducing the footprint on the production line. - Suitable for 38mm Caps: Specifically designed to accommodate 38mm diameter caps, which are commonly used in various bottle types. - Filling Mechanism: Utilizes a volumetric or gravimetric filling system to ensure accurate liquid filling, essential for maintaining product integrity and compliance with regulatory standards. Dodpfxoz Ht Ice Al Sswc - Speed and Efficiency: Capable of high-speed filling and capping, improving overall production throughput. - Versatile: Can handle various liquid types, from water to thicker, more viscous products depending on configuration. Applications: - Commonly used in the beverage industry for filling soft drinks, juices, and other liquids. - Suitable for pharmaceutical products requiring strict filling standards. - Used in cosmetics for lotions, shampoos, and other liquid products. Benefits: - Streamlined production process reduces handling and transfer times. - Improved accuracy in filling minimizes spillage and product waste. - Enhanced product shelf life due to airtight sealing. Dawson Debagger, which is suitable for 250ml bottles. We used to use the NAMPAK type (50mm x 50mm square), and 2 bags would fit width ways. A total of 6 bags could go on the bed at any one time, meaning a capacity of approximately 1500 bottles. We added a special air operated "gate" to the end where the dogchain is, which was for using PET bottles. As the PET bottles were smooth, they tended to stick together - so the function of the gate was to separate the row of bottles that was about to be swept by the dogchain from the rest of the bottles on the bed,. It worked very well, so we also used it for the HDPE bottles. The overall length is around 4.5m, and the width of the bed is I think 1200mm, with the widest part of the machine at about 1.8m. It runs on single phase power (16a, blue plug or hard wired) and has a variable bed speed setting. Speed: 0-8000 b/hr Depending on Volume Type: Monoblock CIP: Ring for connection Cap Feeder: Included Automation: Authentic Fogg controls Filling Heads: 18 Capping Chucks: 5 Cap Type: 38 mm Bottle Type: square Labeller: Graham Labeller Debagging Table: Dawson Included Collection Table: Included Conveyors: 13 meters and bends Bottle Rinser: Included Available: Immediately

Year of construction: 2025, condition: new, Introducing the Xiros Mikro—a compact, bench-top Freeze Dryer engineered for efficiency and versatility. With an 8 kg ice capacity, it can extract up to 4 kg of ice from your products within 24 hours, making it ideal for small to medium batches. Key Features: - Adaptable Tray System: Comes standard with five electrically heated shelves; expandable up to nine to accommodate varying batch sizes. This flexibility allows you to process different quantities efficiently. - Candy-Pop Feature: The new Candy-Pop feature enables you to freeze-dry candies with just the touch of a button, simplifying the process for confectionery applications. - Customizable Processing: Offers manual and automatic modes, allowing you to program up to 16 unique steps for tailored drying recipes. This customization ensures optimal results for various products. - Efficient Design: Low-profile construction facilitates easy loading, while the stainless steel interior ensures durability and hygiene. The design also contributes to market-leading energy efficiency. - Advanced Vacuum Technology: Compatible with scroll dry vacuum pumps, ensuring low maintenance and quiet operation. This feature enhances the overall user experience by reducing noise and upkeep. - High-Quality Construction: Built with premium components for reliability and longevity. The innovative shelf-stack design improves temperature control accuracy by 60%, eliminating the use of adhesives and reducing out-gassing. - User-Friendly Interface: Features a 5-inch color touchscreen for easy monitoring and control, with USB connectivity for data logging and software upgrades. This interface simplifies operation and allows for seamless updates. - Warranty: CE certified and includes a 2-year commercial-grade warranty for peace of mind. This certification ensures compliance with global standards, and the warranty reflects the manufacturer's confidence in the product's durability. What’s Included - Xiros Mikro Freeze Dryer - Scroll Vacuum Pump - 5 tier shelf stack plus trays supplied as standard - Vacuum Hose - Clamps (set of 2) - Sealing Ring (set of 2) - Drain Hose (set of 2) - Quick Setup Card Features - Customizable Processing: With manual and automatic modes, program up to 16 unique steps to tailor your drying recipes to perfection. Store your customized settings at the touch of a button. - Efficient Design: The low-profile design facilitates easy loading, while the full stainless steel interior guarantees durability and hygiene. Dedpfx Alexxx I Ue Sjwc - Adaptable Tray System: Start with 5 electrically heated shelves and expand to a maximum of 9 shelves, providing flexibility for varying batch sizes. - Advanced Vacuum Technology: Recommended for use with a scroll dry vacuum pump, ensuring low maintenance and quiet operation. - High-Quality Construction: The full stainless steel interior and high-performance components ensure durability and hygiene, while the low-profile design makes loading a breeze. - Warranty: The Xiros Mikro is CE certified and comes with a 2-year commercial-grade warranty, providing peace of mind. - Market-Leading Ice Holding Capacity: Designed for larger batches or longer defrost intervals. - 24/7 Operation: Designed to run continuously around the clock. - Premium Components: High-quality and performance parts from leading suppliers, ensuring reliability. - High-Performance Vacuum Technology: Utilizes specialized vacuum technology fittings and connectors for maximum efficiency. - Ice Condenser Specific...