5 Cast iron floor plates size approx. 1530 x 3050 x 406mm.
O7l3p
Lifted and stacked ready for loading
Mounting plate with T-slots from cast steel - grey cast iron
Length 1900 mm
Width 1600 mm
475 mm thick
Thickness approx. 130 mm
Foot size 1800 x 1890 mm
-Clamping surface with aufgeschrubter T - Groove plate steel, thickness 70 mm
-T-slot distance 22 mm = 300 mm
-Parallel to the bottom of the milled upper side = clamping surface
-Machined bottom also the bridges rest flatly and wear
-Very high load possible through the strong ribbing and the structural editing
-Ideal as a press table, comes from...
Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design
-Middle bearing: for Ø 50 mm shaft
Fb3tr09
-made of: gray cast iron
-Number: 7x bearings available
-Price: per piece
-Dimensions: 92/70/H85 mm
-Weight: 2.0 kg/piece
diameter 670 mm
individually adjustable clamping jaws
Be9qy2cx98
height 90 mm
jaw height 90 mm
through bore 140 mm
bolt circle 235 mm
weight approx. 179 kg
Cast iron surface plate
Bcasokyiva
Technical data:
dimensions approx. 5000 x 1500 x 300 mm
solid 40 mm
ribbing 260 mm
weight approx. 3200 kg
used, in good condition
Hello,
For sale Casting ladle for cast iron with a gear.
Quantity: 2 pcs.
Technical data:
Btpg3n7kum
Ladle type - pouring
Capacity - 5000 kg
Drive wheel diameter - 1000mm
The ladle without lining.
Weight: 1 piece 1580 kg / 1 piece 1379 kg
We also sell other casting ladle on other auctions.
I can send photos.
The price is for 1 item.
6 tables each 15' x 6' (approx 4570mm x 1830mm)
Hoa3hgy8a
Clamping plate of cast steel - grey cast iron
1890 mm
Width 1785 mm
400 mm thick
Thickness approx. 70 mm
Nxllq3mh
Foot area 2000 x 1890 mm
-Wind holes 24 and M 20 mm
-Parallel to the bottom of the milled upper side = clamping surface
-Machined bottom also the bridges rest flatly and wear
-Very high load possible through the strong ribbing and the structural editing
-Ideal as a press table, comes from a 200 ton press
Weight: 3500 kg
good condition
Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design
-Middle bearing blank: for Ø 35 mm shaft
-made of: gray cast iron
-Number: 12x stock available
-Price: per piece
Mswpw8
-Dimensions: 70/52/H75 mm
-Weight: 1.2 kg/piece
diameter 400 mm
passage / inner diameter 100 mm
4 individually adjustable clamping jaws
mounting short taper DIN55022 size 6
taper diameter 106 mm
bolt circle of the 4 fixing screws 133.4 mm
height approx. 100 mm
height of the jaws 58 mm
screw size M12
weight approx. 69 kg
Yxd7ygcwf
Marking plate cast iron, table length 2000mm, table width 1000mm, height 840mm,
5 adjustable feet, in good condition, ex location
Oiocn
Sold - SOLD Cast iron measuring table Size : 1850 x 920 x 245 mm Working height : 1000 mm Price for the cast iron measuring table incl. undercarriage : on request via e-mail Delivery conditions: Delivery time: from stock, t.a.t. Delivery: ex Baarle-Nassau Payment: for pick-up Prices: are net, excl. VAT. Machinehandel De Leeuw BV cannot be held responsible for differences in technical data between this offer and the actual machine. Machinehandel De Leeuw BV is specialized in used machines and ac...
Make ASQUITH UK
YOP 1989
Technical data
Length4000 mm
width 165 mm
Height140 mm
Quantity T-slots1
Nlgqt
Distance T-slots / jump 0 mm
T-slot sizeT 30
Weight per plate ca.635 Kg clay
Number of identical pieces22 units
Mounting plate with T-slots from cast steel - grey cast iron
T - plate from the plate field
Length 1170 mm
Width 1100 mm
Nx7hxn8d
Thickness 250 mm
-T-slots 48 mm
-strongly ribbed
Weight: approx. 1400 kg
good condition
2 piece available, quotation depending on the clamping table is all plate by a Plattenbohrwerk, many sliding blocks on all sides angular cut available.
See stock no: 55886 55887, 55888, 55889, feet to the align see bearing no. 56195
Measuring plate on steel frame L2770 x W1100 x H310mm
Measuring table with cast iron plate
Plate dimensions:
L2770 x W1100 x H310mm
Total height:
Dwmjam
785 mm
Shipment via forwarding agency possible, please contact us.
More articles - new and used - you will find in our store!
International shipping costs on request!
Dimensions:,
Bgvhe0gtj2
1200 x 1000 x 140 mm,
with stable base 800 mm total height,
Remark:,
Storage compartment and rear wall made of VA sheets,
Measuring plate one-piece, cast steel
L x W 7,500 x 3,000 x 350 mm
Adjustable feet flexibly available
Crfdlmk0
Manufacturer Meuselwitz Casting
Straightening and welding plate, cast iron is strongly ribbed
Length 1000 mm
Width 750 mm
110 mm thick
Bc9v0flqe7
Working height 810 mm
Plate thickness without ribs 34 mm - 3 piece adjustable support points table with metal base
-simple metal base
Weight 280 kg
Force cylinder: 120-400 to
Capacity: 3500-6000 kg/h
Obp2p
Power: 22 kW
Installation surface: 5,3 x 3,5 x 2,9 m
Cast iron angle
Clamping surface size H x W 1000 x 800 mm
70 mm thickness of plate
Depth 600 mm
Stand area 8000 x 600 mm
T-slots 50/30 mm
with:
-6 T-slots
used, in good condition
Yq8shc
Seamer is in good working conditions. Equiped with tooling for 99mm, 73 mm and 84mm cans.
Iwg9ar7
Height from 25mm to 150 mm.
Speed up to 150 cans per minute.
Cast iron angle
778aofo
Clamping surface size 800 x 250 mm
70 mm thickness of plate
Depth 500 mm
Stand area 250 x 500 mm
with:
-5 pieces horizontal T-slots 38/22 mm
used, in good condition
Cleaner DOZAMET OWT 400A made in Poland in 1988. The cleaner is offered with a filter chamber. A few years ago, the machine was thoroughly refurbished.
Technical specifications:
- useful capacity of the working chamber: 0.35 m3
- minimal dimensions of castings: min. 25 x 25 x 25 mm
- maximum dimensions of castings: 400 x 400 x 400 mm
- minimum wall thickness: 5 mm
- minimum unit weight of cleaned castings: 40 kg
- maximum casting load weight: 400 kg
- cleaning time for one load of iron castings...
Swivel castor motor crane, 70 mm, swivel wheels and total height is 100mm (10cm). Dimension mounting plate = 95 x 60 mm Heart on Heart bolt holes 95 mm side = 75 mm Heart on Heart bolt holes 60 mm side = 30 mm The wheel itself is round 70mm (7cm) and the total height including mounting plate is 100mm (10cm) Note these are the middle wheels of the motor crane (WERK-00034)! Swivel castor, 70 mm, Swivel castor, workshop crane, Swivel castor, Swivel wheel. Are you looking for swivel castors? We hav...
Chiron FZ 18 Siemens Brushless servo motor, used, general overhaul price on request, type: 1FT 5072-01671-2-Z, number: YF VN47 7363 01 001 EN 60034 You can also view our terms and conditions on our website.
Inquiries please only by mail!
Pud99m
Swivel castor motor crane, 85 mm total height 115 mm (11.5 cm). Dimension mounting plate = 95 x 60 mm Heart on heart dimension bolt holes 95 mm side = 75 mm Heart on heart dimension bolt holes 60 mm side = 30 mm Dimension of the wheel is round 85mm (8.5 cm) and the total height including mounting plate is 115mm (11.5 cm) Note these are the front and rear wheels of the motor crane (WERK-00034)!Swivel castor for motor crane, 85 mm, Swivel castor, Swivel castor for workshop crane, Swivel castor. A...
Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor
Nv3bv
-Motor comes from a Weisser Heilbronn Type 29 CNC lathe
-Speed: 2000 rpm
-Power kW
-Construction: B5
-Shaft diameter: Ø 30 mm
-Number: 1 piece of motors available
-Price: per piece
-Dimensions:
-Weight: 20 kg
1
1. lawn mower / all mower, manufacturer: AS, type: unknown, S/N: 08433375, swivelling 3-wheel, rear wheel brake
Btyuuv8z37
round bar steel: 40 mm
square edge steel: 38 mm
angle steel: 100x100x12,5 mm
pressure capacity max.: 50-105 t
Number of working hours: 1426 h
total power requirement: ca. 6 kW
weight of the machine ca.: 2,8 t
space requirements of the machine approx.: L:2,75x1,3x1,85 m
Combined Section Steel Shear hydraulic also suitable to cut wavy profile.
- hole punch: 50 t with max. 37mm in 16mm sheet
- edge shear: 45t with 76x76x8 sheet
- notching: 45t with 76x50,8x9,5mm sheet
Nt0oj
Attention! Machine is w...
we offer:
Conveyor belt conveyor 515x80(105)x105cm 6m/min controlled by machine adjustable in height and angle, mobile on 3 stands with 6 rollers, belt is functional.from an injection molding machine.
Manufacturer:?
Type: 515x80(105)x105cm 6m/min
Year of manufacture:?
Dimensions
belt: 515x80 cm
Plant: 515x115 cm
Height max: 1050 cm
Angle: adjustable
belt speed: approx. 6 m/min
mobile: yes on 3 stands 2 rolls
connection: 400V 3~ 0,41A 120W 50Hz
Gear Motor: SEW-Eurodrive 1300/27 1/min 22Nm
weight ...
Mannesmann Demag Motor
Technical data:
Type GCM 180 02 0905
333 V
Ckrlu3rv8
26,5 kW
1920 1/min
90,0 A
Brake 200 Nm
The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test report, which is part of our service.
The MMV Group offers you the suitable financing especially for our products.
Calculate now with MMVfinrate easily online your monthly rate.
On request you will receive your personal financing offer and competent advice.
Compact charger CAST LOADER 33TLX.
Model 2019 full version.
Description :
Engine: Kubota D1305
Standard wheels: 26-12.00-12 STARCO Agricultural Profile.
Weight of the machine: 1300Kg.
Width with standard wheels: 120cm.
Length: 2445mm.
Turning radius: 885mm.
Transmission: hydrostatic 4 RM with 4 Poclain hydraulic motors.
Forward speed: 16km/h.
Differential lock: electric.
Max lifting capacity: 950kg.
Hydraulic capacity :1250kg.
Max. dynamic tractive force: 1250 daN
Driving hydraulics : Pump 84l/m...
geared motor gear SEW-EURODRIVE 45kW 1400/110
2sq9nm
For sale a gear with a 45 kW motor, speed 1400/110, very good condition with a plate for mounting to the pedestal with a rack. Weight 900 kg.
4-Q-EC-Servoverstärker /10/24-70VDC
Pvghtkqx
Nr. 0843:
1 gebr. Coil - Durchlauf / Blechvorschub
Fabr. IRON / RDI Group
Typ CRM-20
Bqwairt
Antriebsleistung: 2,2 kW
For sale is a diesel Deutz engine in very good condition removed from an excavator.
Technical data :
Manufacturer : Deutz
Engine : 12 cylinder F12L413 F air cooled
Power : 235 KW / 320 PS
RPM : 2300 rpm
Operating hours : approx. 5400 h
Xtysk
Delivery is possible
Item condition: Used from assembly line for commissioning
Case: Very good, no scratches
Iwf3pc7
Packing: Original packing
Guarantee in months: 12
voltage: 24 V
Current: 6 A
Weight: 0.938 kg
Storage location: Rosenfeld
Storage bin: P2A2_BS2
Siemens 1HU3056-OAFO1-Z
2rgmem
Permanent - magnet - motor expanded from a current index machine 2 units in stock
No. 10571 / 10572
