Used Carpentry for sale (178)

Condition: excellent (used), Year of construction: 2018, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 16236/1, nominal power (apparent): 480 kVA, Great framer Dodpoyngpgsfx Apwsut

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 20518, We offer this used Schmidler S4 carpentry machine, year of manufacture 2000. Manufacturer: Schmidler Model: S4 Year of manufacture: 2000 Machine type: carpentry machine Dedpfx Aoy Ewxzjpwsut - 4-strand cross conveyor (inclined, ascending) - Infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cut-off saw - Saw blade diameter: 710mm - Swivel angle: 360 degrees - Tilt: 0-65 degrees - Scrap wood pusher - Marking pin horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Powered outfeed roller conveyor - Pneumatic push ruler - Transport & measuring system - Conveyor belts need to be replaced - Controls: sema btl Maximum workpiece dimensions: Height: 300mm Width: 400mm Total length: approx. 21m Infeed roller conveyor Outfeed roller conveyor with push ruler and deposit rods Machine used, operational. Conveyor belts need replacement. Machine can be viewed by appointment. Available immediately. If you have any questions or would like more information, feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 4208 E, Makita carpentry tenon cutter type 5500 S. Motor 1,420 W, 230 Volt, 50 Hz. Longitudinal saw blade speed 1,650 rpm, crosscut saw blade speed 2,200 rpm. Complete with R.Beck "Vario" saw and work table. Maximum workpiece length 3,100 mm. Tiltable from 0 to 45°. Sold as seen from location Seevetal, without transport, subject to prior sale. Djdpfxjy Id Sge Apwsut

Condition: new, Year of construction: 2026, functionality: fully functional, 5 kW, 7.5 HP, mobile on sturdy swivel castors Cutting height: 200 mm Cutting height at 45°: 140 mm Tiltable to the left up to 60° Tiltable to the right up to 45° Cutting length: 420 mm at 90° position Cutting length at 45° tilt: 300 mm Tiltable to the left 60°, to the right 30°, adjustable by hand crank from the rear (optionally also from the front) Includes 1 saw blade: 520 x 4.4 x 50 mm, 60 teeth, negative rake Left roller conveyor with scale and stop slider, length 2,000 mm up to the saw blade Machine length: 4,000 mm 1 roller conveyor extension with scale and second stop slider Extension mounts on the left side, length 4,000 mm. This extension conveyor also includes a retractable measuring rod with a stop, making it possible to cut timber to an accurate length of up to 7,500 mm on the left side 1 feed roller conveyor, mounts on the right side, length up to the saw blade: 2,000 mm Dedpjdxxadefx Apwjut Options: pneumatic material clamping, laser cutting indicator With appropriate conversion kit, also suitable for aluminum processing

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 5 kW (6.80 HP), 5 kW (7.5 HP) Cutting height: 200 mm Tiltable up to 60° to the left, up to 30° to the right by means of hand wheel from the front Cutting height at 45° tilt: 140 mm Cutting width: 420 mm; Cutting width at 45° swivel: 290 mm Swiveling up to 60° to the left, up to 45° to the right Including saw blade for wood 6,000 mm heavy-duty cross-cut roller conveyor, mounting side left, stop carriage adjustable from the machine using handwheel, pneumatically lockable, length digitally readable, digital display with 230V supply 4,000 mm heavy-duty feed roller conveyor, mounting side right The machine can be tilted on both sides from the front using a hand wheel and worm gear Duedpfx Ajdxw U Ispwst Various options available on request, e.g., greater cutting height, material clamping, and laser cutting indicator With the appropriate conversion, also suitable for aluminum processing

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Data: Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Cutting length: 420 mm at 90° position Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Machine packed on wooden planks Images show a customer’s machine. Available upon request also with 215 mm or 240 mm cutting height. Dujdpfxon R A Ewj Apwst

Condition: new, Year of construction: 2026, functionality: fully functional, TWINIX Core – Butterfly Table/Butterfly Turner for Timber Construction Butterfly table designed for the efficient production of wall, ceiling, and roof elements in timber construction. The TWINIX Core enables safe and fast turning of components and optimizes the production process. ⚙️ Technical Data / Advantages Element sizes up to 12.0 m in length, 2.80 m in height, and 3.0 t in weight Robust design for daily use Precise work in timber frame construction Efficient turning via butterfly system Djdpfxey A Ihue Apwsut Suitable for carpentry workshops and element production Brand new – unused condition. Further details and configuration available upon request.

Condition: good (used), Heavy-duty universal carpentry circular saw, carpentry universal circular saw, miter saw, crosscut and miter saw, joinery circular saw -Manufacturer: Schneider Carpentry Machines, CNC joinery circular saw with roller conveyor, laterally movable left/right -Type: SLS 28 -Circuit saw: for crosscuts, miter cuts, bevel cuts, rip cuts, -Circuit saw: for cutting valley rafters, eaves boards, chamfers, and wedge boards -Saw unit: swivels 30°, rotates 180° -Drive motor: 11 kW -Saw blade: Ø 750 mm -Cutting height: max. 280 mm at 90° -Cutting height: max. 140 mm at 30° -Cutting width: max. 550 mm Duodpfsx Ityyjx Apwjt -Roller conveyors: 5020/750/H970 mm / 2000/750/H970 mm 320 kg -Saw dimensions: 2400/2130/H1600 mm 984 kg -Total weight: 1304 kg

Condition: used, Year of construction: 1994, machine/vehicle number: 1301, functionality: fully functional, I am offering for sale a Hundegger P-10 woodworking machine, designed for processing roof beams. The machine is fully operational and still in use; demonstration under power is possible. Maximum cross-sections: 260 x 400 mm. Year of manufacture: 1994. Included with the machine: - Under-table cross-cut saw - 2 marking pencils - 3 large milling cutters - 1 finger joint cutter - 2 drill bits + nail drill - 4 chain mortisers Service carried out on 10/6/2025. A large number of spare parts are included. Duedpfxsw I Emke Apwst Please do not hesitate to contact me for more information.

Condition: used, Year of construction: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEEDER Brand: ROBLAND Model: T120S-L-P Year: 1995 Machine offered as-is, without warranty SPINDLE MOULDER CAPACITIES: - Spindle diameter: Ø50 mm Useful length (above the table): 150 mm Vertical spindle stroke: 205 mm - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE SPECIFICATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Frontal table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Raised tool passage in table: Ø320 x 95 mm - Wooden fences: 530x150 mm Fine adjustment of the hood and indexed stops Maximum tool diameter for guide work: Ø250 mm TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated transverse stop with adjustable end stop Adjustable support arms ensure complete rigidity of the carriage rail - Adjustable tool approach table with eccentric clamp - Angular adjustment of the fence with graduation from 0 to 45° - Tenoning hood guard - Maximum tenoning tool diameter: Ø350 mm Equipped with a power feeder: - Brand: Polymatic Year: 1996 - Power: 0.75 kW - 3 rubber feed rollers - 2 feed speeds (mechanical and electrical) OTHER CHARACTERISTICS: - Electrical supply: 380V, 3-phase + T, 50Hz - Manual star-delta starting - Installed power: 6.25 kW - Main motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button Duodpfox Igzqjx Apwot - Safety guard for guide operations - Dust extraction inlet on spindle hood Ø120 mm Lower suction port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Weight: 800 kg

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, Dodpfx Apofg Tatjweut 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: used, Year of construction: 2000, Used, good condition Make: Schneider Type 2406 Year of manufacture: 2000 Machine no. 910 CE-certified Cutting height 250 mm Saw blade tiltable between 90° and 30° (60°) Turntable rotatable 180° Motor power 7500 W, 400 V Saw blade diameter 650 mm Cutting height for rip cuts Continuously adjustable from 0 to 250 mm Cutting width adjustment for rip cuts 650 mm by transverse saw movement Motorized tilting with digital display Movable machine stand Automatic saw feed with two-hand control Laser kerf indicator, cross cut Pneumatic workpiece clamping on the right and left New price approx. €25,000.00 Extraction connection 100 mm Space required approx. 2800 mm x 2800 mm x 2000 mm Weight approx. 900 kg Storage location 97447 Gerolzhofen, free on freight, unpacked Handed over in as-is condition, as seen, without warranty or guarantee Duedpfewkvw Hsx Apwet

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, input voltage: 230 V, type of input current: three-phase, working height: 150 mm, We offer this very well-maintained SCM Multiflex C window and door machining center, year of manufacture 1995. Purchase date: June 1995 Tenoning carriage power: 15 hp Profiling spindle power: 10 hp each Tenoning spindle height: 320 mm Profiling spindle height: 320 mm Electrical connection: 3x230 V Glazing bead recovery system The machine is still in very good working order. It has had only one owner throughout all these years, used exclusively in a family carpentry workshop (father and son). Therefore, the machine is certainly not worn out. Dujdoyvhnujpfx Apwst Reason for sale is the modernization of the machinery fleet. A new SCM corner joint machine has been acquired. The machine remains fully operational and can be inspected and tested until June. All features and functions are still intact. Sold without tooling (cutters).

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. SCM Gabbiani P80 Panel Saw – Year 2021 – 4300 x 4300 mm For sale is a state-of-the-art SCM Gabbiani P80 panel saw, manufactured in 2021 and in excellent condition. The machine was used in an active carpentry workshop and impresses with its precision, speed, and high reliability in daily operations. Technical Specifications: Cutting length: 4300 mm Cutting width: 4300 mm (large version) Cutting height / blade protrusion: 80 mm Main saw blade diameter: Ø 340 – 370 mm Scoring saw blade diameter: Ø 200 mm Main saw blade speed: approx. 4,650 rpm Scoring blade speed: approx. 5,850 rpm Drive & Power: Main motor: approx. 7.5 – 15 kW (depending on configuration) Scoring unit: approx. 1.3 – 1.5 kW Total connected load: approx. 12 – 15 kW Voltage: 400 V / 50 Hz Speeds: Saw carriage: 6 – 60 m/min (stepless) Pusher speed: up to 60 m/min Pneumatics & Extraction: Compressed air requirement: approx. 300 NL/min / 7 bar Extraction capacity: approx. 2,200 – 2,400 m³/h Extraction ports: 4 x 120 mm Features & Equipment: Air flotation tables for easy handling of large panels Floating clamps for precise cutting Scoring unit for chip-free cuts PC/PLC control (Maestro system possible) Robust industrial design for high workload High repeatability and cutting quality Material suitability: Suitable for: Chipboard MDF / HDF Multiplex / plywood Coated panel materials The machine is fully operational and ready for use. Viewing possible anytime by appointment. Duedpfxjylp S Es Apwet Location: Germany If you are interested, please get in touch – further photos, videos, or detailed information are available upon request. Dismantling and delivery can be arranged at additional cost.

Condition: excellent (used), Year of construction: 2006, SCM Z30 CNC Machining Center – Year of Manufacture 2006 – Fully Equipped – On Behalf of Customer For sale is an SCM Z30 CNC machining center from the year 2006. The machine is offered on behalf of a customer and was in operation in a carpentry workshop until recently. The SCM Z30 is a proven and robust CNC machine for furniture production and interior fittings, making it ideal for cost-effective manufacturing in everyday use. Technical Data: Manufacturer: SCM Model: Z30 Year of manufacture: 2006 Travel X-axis: approx. 3000 mm Travel Y-axis: approx. 1300 mm Travel Z-axis: approx. 150 mm Working area: approx. 3000 x 1300 mm Unit / Spindle: Main spindle: approx. 7.5 kW Speed: up to 18,000 rpm Equipment: Console table with vacuum system (pod and rail system) Automatic tool changer – fully equipped Integrated drilling unit CNC control (SCM) Rugged industrial build Applications: Furniture manufacturing Interior fitting Panel processing Single-item and series production Condition: Machine was in use until recently Duodpoyl Numofx Apwet Fully functional Special features: Sale on behalf of customer Photos and videos available Inspection possible by arrangement Location: Germany If you are interested, please get in touch – we will be happy to send you further information, photos, and videos. Location: Ostfriesland region

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm Dusdewv Tqbspfx Apwst - Colour RÁL 7035 light grey

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Mafell Hand Planer ZH 245 Ec ABSOLUTELY LIKE NEW 230 Volt 2500 Watt 0-4 mm 13.2 kg with new replacement belts Transport available at additional cost! Shipping possible at additional cost. Djdpfx Apsyt Di Ujweut

Condition: like new (used), Year of construction: 2016, functionality: fully functional, Chain Mortiser LS 103 EO ABSOLUTELY LIKE NEW - 8.7 kg - Year of manufacture: 2016 - 230 Volt - with stops as shown in photo - 2600 Watt Dujdpfx Asyty I Hopwot Transport possible at additional cost!

Condition: good (used), UDKP100 Multi-blade Circular Saw - 37 kW motor power - Max. cutting height: 100 mm - Max. cutting width: 300 mm Dujdpfx Apsxbrutowst - Max. working width: 450 mm - Saw blade diameter: 250/300-350 mm - Working speed: 40 m/min - Chain conveyor feed - Manual blade height adjustment - Extra-thick steel frame, shaft made of specially alloyed, hardened and ground steel - Manual blade height adjustment depending on selected blade diameter - Large set of spacer rings included - Price ex-stock Hungary

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Hand-held circular saw MKS 145 EC - Year of manufacture: 2015 Dsdpfx Apeyty D Iowsut - Cutting depth: 145 mm - 2600 Watt - 230 Volt - Swivel range: 0–60° - Saw blade diameter: 370 mm - Dimensions: 430 x 430 x 710 mm - Weight: 13.8 kg Transport available at an additional cost!

Condition: like new (used), functionality: fully functional, One-handed planer MHU 82 in Systainer T-MAX - Planing width: 82 mm - 800 watts - 3.4 kg - 230 volts Transport available at additional cost! Duedpfsyty T Njx Apwet

Condition: excellent (used), CATALOG NO. 6907 TECHNICAL DATA - Top loading hopper inlet: 1980x1050mm - Bottom loading hopper inlet: 980x1050mm - Outlet for shredded wood: Ø210mm - Rotor working width: 980mm - Main motor: 30kW - Pump motor: 1.1kW - Number of knives: 36 pcs - Knife dimension: 40x40mm - Screen: 18mm - Pressure drawer - Electric autoreverse Djdpfx Apsy Nz Rpswjut - Dimensions (L/W/H): 2100x2030x2070mm - Weight: approx. 3500kg – French made – Like WEIMA WL 10 – Fitted with new knives – Autoreverse – Pressure drawer – Very good condition – Used chipper Net price: 82,900 PLN Net price: 19,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant fluctuations in the exchange rate, the price may change)

Condition: good (used), Year of construction: 1989, machine/vehicle number: V165126, functionality: fully functional, For sale is a high-quality panel saw from Martin (Otto Martin Maschinenbau, Made in Germany) – a robust and durable professional-grade machine for the carpentry/joinery sector. Manufacturer: Martin Year of manufacture: approx. 1989 Saw blade: Ø 200–450 mm Speeds: 2800 / 4000 / 5500 rpm Voltage: 380 V / 50 Hz Equipped with a stable sliding table Parallel fence & crosscut fence included Extraction connection available Condition: Used, but fully functional Typical signs of use (see pictures) Very solid industrial quality – not a DIY store machine Viewing and test run possible by arrangement. Ideal for joinery, workshop, or advanced woodworking. Location: 45356 Essen Dsdjy D Iyaspfx Apweut

Condition: new, Year of construction: 2025, functionality: fully functional, planing width: 630 mm, number of blades: 102, height adjustment type: electric, table width: 630 mm, Equipment: low noise, motor brake, For sale is a HOFMANN AD 635 jointer-thickness planer in premium industrial design. The machine features a HELIX spiral cutterhead (630 mm), a powerful 7.5 kW motor, and a thickness table positioning control. Equipment / Highlights: + HELIX cutterhead, 630 mm – 102 carbide reversible knives + Very quiet operation, reduced vibration + Excellent planed surface quality + Motor power: 7.5 kW (upgrade from standard) + Digital positioning control for the thickness table – sensor monitoring with photoelectric switch + Electronic start and braking unit + Two feed speeds: 7 / 14 m/min + Thickness table supported by 4 posts, quadruple guidance + Rubber-coated infeed and outfeed rollers + SUVAMATIC cutterhead guard + Integrated operating hours counter + Robust industrial construction Technical data: + Planing width: 630 mm + Cutterhead: HELIX, solid steel + Cutterhead speed: 5,800 rpm + Knives: 102 carbide reversible knives (37°) + Motor: 7.5 kW, 400 V / 50 Hz + Feed speed: 7 / 14 m/min + Extraction ports: 2 × Ø 160 mm Scope of delivery: + HOFMANN AD 635 Jointer-Thickness Planer + HELIX Spiral Cutterhead + SUVAMATIC Safety Guard + Positioning Control + Operation manual (German) HOFMANN AD 635 Jointer-Thickness Planer | HELIX | 7.5 kW | Display unit Manufacturer: HOFMANN Maschinenfabrik GmbH – Made in Germany HOFMANN AD 635, jointer-thickness planer, thickness planer, jointer, combination planer, HELIX cutterhead, spiral cutterhead, woodworking machine, joinery machine, carpentry machine, industrial planer, planer 630 mm Machine type: Joiner-thickness planer (combination machine) Model: AD 635 Year of manufacture: 2025 Condition: New / showroom machine Dusdpfsx Ir N Tex Apwjt Location: Haldensleben – Shipping available from stock

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AE00002748, 12kN SEMI-AUTOMATIC CAM PRESS Brand: SCM Model: Action E Serial No.: AE00002748 Year: 2021 MAIN ADVANTAGES: - Better pressing quality, uniform across the entire surface to be machined (comb structure) - Parallelism and orthogonality thanks to the use of screws of the appropriate size. - Efficient operation with knobs FEATURES: - Machine frame: extra-rigid welded monoblock chassis Movable side work surface (X direction) Movable upper work surface (Y direction) Movement of each support is transmitted via a geared motor. This drives two trapezoidal screws of the appropriate size and equipped with a double chain sprocket (5/8"), a system that achieves the best possible parallelism for the movable supports. - Worktop height from floor: 60 cm - Maximum usable dimensions: 2400 x 1100 (H) x 700 mm - Minimum usable dimensions: 250 x 270 (H) x 250 mm - Maximum horizontal pressure: 1000 kg Positioning speed: 50 mm/sec - Maximum vertical pressure: 1500 kg Positioning speed: 45 mm/sec - Movement achieved by high-precision systems using AC motors. - Power supply: 400 V. Three-phase 50 Hz IN 6 A Installed power: 4 kW - CE marked - Lockable disconnect switch, mushroom stop Dimensions in operating order: x x h. mm Space required around the machine for movement and work: m Transport dimensions (LxWxH): x x h.m Weight: Kg Machine supplied with its manual, spare parts list, and diagrams. Dedpfx Aowf I Iaopweut Machine serviced, brought into compliance, with quality control and dynamic functional testing. With a 3-month warranty and certificate of compliance. Available from stock, subject to prior sale.