Used Center Grinding Machine for sale (69,847)

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 92ML/109/11821, rotary table diameter: 1,220 mm, grinding height: 572 mm, total width: 4,394 mm, total length: 3,353 mm, overall weight: 13,700 kg, grinding wheel diameter: 711 mm, spindle speed (max.): 550 rpm, power: 35 kW (47.59 HP), table diameter: 1,219 mm, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg1220 Ihodpfx Adexgq D Dsdst

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: NVLA7K0128, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: Fanuc, controller model: 0i-MC, total length: 1,575 mm, total width: 2,168 mm, table width: 400 mm, table length: 600 mm, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, BRIDGEPORT HARDINGE GX480 Vertical Machining Centre. New 2007 Ijdpfsxgqwdsx Addsht With Coolant, Interlocked guards, Low Volt Light FANUC 0i-MC Control Machine Dimensions: 1575 x 2168 mm Machine Weight 3000 kg Spindle Motor Power 7.5 kW Spindle Speed 10000 rpm Table Size 600 x 400 mm Tool Change Capacity 16 Station Tool Size BT40 Traverses XYZ 480 x 400 x 330 mm

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder. Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel. Serial Number: to be advised New 1980's originally Country of Origin: UK Segmental wheel dia 34" Segments per set 16" Table dia and grinding capacity 60" Magnetic table dia (Humphreys) 60" Max height wheel to Magnetic table 18" Minimum height of wheel to table 4.1/2" Spindle speed 450 rpm. Table speeds 16 and 5.1/2 rpm. Automatic feeds 10 rates .004-.040 ins/min. Power elevation 25 ins/min. Spindle motor 60 Hp / 960 rpm 45 kW Table motor 6/2.1/2 HP /1440/480rpm. Feed motor 1/4 Hp / 1440 rpm. Elevation motor 1 Hp / 720 rpm. Coolant pump motor 1 Hp / 1440 rpm. Overall height of machine 10'3". Ijdpfx Adowugh Dodjht Floor space 13'8" x 10'4". Approx net weight 15 tons.

Condition: used, Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Isdpfx Adevu U Itjdjht Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2015, machine/vehicle number: AH/118733, Busellato JET Optima C21 E CNC Machine Ihedpfx Adexltk Rjdst Description JET OPTIMA C21 - E X = 3050 mm Y= 1250 mm Z = 130 mm CNC Working centre complete of: · Centralized automatic lubrication · Remote push button panel · Nr. 4 jig locking device connections · Nr. 1 air pressure plug · Nr. 2 working areas (X) · Nr. 6 TL 1250 panel supports · Nr. 12 vacuum cups 140 x 115 H =50 (TL) · Double “0” line (references for 6 panel supports and lateral references) · Panel lifting unit with 4 bars · Cross laser for positioning vacuum cups · 0-360° CNC unit for electro spindle · 1-outlet horizontal router unit 4 kW - ERG32 · Pump 90 m3/h · Boring head TFM 18 with integrated saw unit (12V+4X+2Y) · Electro spindle 11 kW (S6) · Tool changer ST10 - HSK F63 · PT1 tool position - HSK F63 · Machine software “Genesis Evolution” · Programming software “Jet Cad” · Tele-service (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2010, Biesse Rover A 3.40 FT K2 Description: Working fields: X = 3685 mm; Y = 1290 mm; Z = 160 mm Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Vacuum tank 300 m3/h rotary claw vacuum pump12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowing unit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Numerical Control XP600 BIESSEWORKS - Advanced programming system - machine version BIESSE NEST Module Air conditioner for electric cabinet Inverter Safety devices with mats Prearrangement for mechanical copying unit (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland Ihodpfx Aoxwcb Nsddot

Condition: used, Year of construction: 2008, Biesse Rover A 3.40 FT K2 Numerically controlled machining center ROVER A 3.40 FT K2 Working fields: X = 3685 mm; Y =1290 mm; Z = 160 mm The composition includes: Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Vacuum Pump 300 m3/h 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowingunit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Numerical Control XP600 BIESSEWORKS Ihodpjx Afvtefx Addjt BIESSE NEST Module Air conditioner for electric cabinet Inverter Safety devices with mats (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2014, Biesse Rover B G 2231 FT complete with loading and unloading system Description: Workfield X in Y: 3100 x 2205 mm Flat table Number of axes milling motor : 3 No drilling unit Tool holder: HSK 63 Changer: Fixed with 21 positions Vacuum pumps: 2 x 300 m3 Fences Office Software License Infeed & outfeed table (to be loaded with vacuum lift) Sweeping arm Infeed ruler B-Solid Presetter Detailed description on request Iodpfxjw Hf A Re Addeht (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Year of construction: 2021, condition: like new (used), As-new deburring and grinding machine Model: VKUE 150 Capacity: 150 liters Incl. grinding stone Year of manufacture: 2021 Isdpeyabraefx Addsht Incl. water filtration system

Condition: ready for operation (used), functionality: fully functional, grinding length: 1,546 mm, grinding width: 150 mm, input voltage: 380 V, grinding wheel diameter: 200 mm, table length: 1,546 mm, table width: 150 mm, We offer this ready for use Reform AR 15 knife grinding machine, year of construction 1992. New electronic drive system installed in 2024. Isdpfex R Evfjx Addjht Type: 51 Grinding length: 1546 mm Machine number: 4980 92 Voltage: 380 V Power: 6 kW Available April 2026 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), travel distance Z-axis: 600 mm, feed length X-axis: 900 mm, feed length Y-axis: 900 mm, controller manufacturer: Siemens Sinumerik 840D SL, total height: 3,415 mm, total length: 4,655 mm, total width: 5,890 mm, empty load weight: 16,500 kg, rotational speed of tool magazine (max.): 40,000 rpm, Type: XCEEDER 900/RT XCEEDER is een 5-assig geïnterpoleerd bewegend bewerkingscentrum voor hogesnelheidsfreesbewerkingen. Speciaal ontworpen voor toepassingen van complexe tandwielen en waaiers tot mallen, matrijzen en gereedschappen, voor projecten in de lucht- en ruimtevaart, automobielindustrie en energieopwekking. - Maximale werkstukdiameter: 900 mm - Maximale afstand tussen spindel en tafel: 700 mm - Hydraulische klemming op tafel - A-as: -30° / 110° - C-as: continu - max. koppel op de spindel: 18/16 Nm Iedpfx Adsx Twa Iodsht - Gereedschapswisselaar met 150 posities Opties die op deze machine worden gemonteerd: 1 - 40.000 tpm hogesnelheidsspindel 2 - tafel dia 700 mm met hydraulische klemming Gereedschapswisselaar met 3-150 posities 4 - spaantransportband 5 - koelsysteem met terugwinning 6 - Koelvloeistoftemperatuurregeling 7 - hoge drukkoeling (40 tot 70 bar) deurspindel 8 - rookafzuigsysteem 9 - chipverzamelbox 10 - Voorinstellingssysteem en gereedschapintegriteit: laser- en mechanische taster voor meetgereedschappen 11 - Renishaw-meetkop Veel van de voordelen van de XCEEDER komen voort uit de kern van zijn structuur. Van een opmerkelijke winstmakerij, via het gietijzeren portaal, van alle trillende eigenschappen van "Metalquartz", Bretons gepatenteerde materiaal. Dit materiaal biedt een thermische inertie en is een effectief bestanddeel tegen bewerkingen, wat resulteert in zeer nauwkeurige en onverwachte reacties op het bewerkingsproces. Table dimensions: dia 700 mm Max weight on the table: 1000 kg Admission in spindle (ISO): HSK-E40 Power on the spindle: 45/40 kW Number of axes: 5 AXIS simultaneous Toolchanger: yes Number of toolholders: 150 positions

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, For right-sided edgebander To suit machine length 6m-7m Isdpfxjx Igbdo Addsht Ideal for Homag Edgeteq S-300 (KDF1440/1450) or Homag Edgeteq S-380 (KDF1650) Workpiece length: 300 - 2,500 mm Workpiece width: 50 - 1,450 mm 4-sided processing* min. workpiece length: 300 x 300 mm 4-sided processing* max. workpiece length: 1,450 x 1,450 mm Workpiece thickness: 8 - 60 mm Workpiece weight max.: 50 kg Mass per unit area: 25 kg/m² Working height: 835 - 950 mm Feed speed: 8 - 25 m/min

Condition: excellent (used), Year of construction: 2011, Hurco VMX60SR 5 Axis CNC Vertical Machining Centre With Hurco Winmax Dual Screen Control Table Dimension 1,670 x 660mm (5 'T' Slots). Rotary Table Dimension Ø610mm (5 'T' Slots). Axis Travel 'X'=1,525mm, 'Y'=660mm, 'Z'=610mm, 'B'=0-92°, 'C'=360°. Maximum Rapid Traverse 30m/min. Maximum Spindle Speed 12,000rpm. Spindle Taper ISO 40. S/No: S374F2210122DFDCH (2011). Ihodpfx Asx H Tbbjddst With Spindle Inspection Probe, Renishaw Toolsetter, Coolant System, Chip Conveyor, Filtermist FX7002 Mist Extraction Unit, Wash Gun, Handwheel, Signal Tower. Please View Last Service Report 27/05/2025 (Attached). Note: Spindle Tooling & Vices Not Included.

Condition: used, Year of construction: 2006, controller manufacturer: Haas, Control: Haas Control X Axis Travel: 1016mm Y Axis Travel: 508mm Z Axis Travel: 635mm Max Workpiece Weight: 1558KG Spindle Speed: 8100rpm Table Size: 1219mm x 457mm Iodpfx Adox R Ux Nedoht Tool Change Capacity: 20 Tool Size: BT40 Accessories: 4th Axis HRT160, 21 Tool Holders, Swarf Auger.

Condition: good (used), Year of construction: 1999, Drill grinding machine, drill grinding device, tool grinding machine, twist drill grinding machine -Manufacturer: CUOGHI AFFILATRICI, drill grinding machine type APE60 with point thinning device -Drill chuck: up to Ø 60 mm Iodpfx Ajyab Syjddeht -Grinding discs: Ø 200 x 45 x 32 -Coolant system: present -Accessories: incl. tools (see photo) -Dimensions: 860/880/H1300 mm -Weight: 275 kg

Condition: used, Year of construction: 2022, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. Ihsdpjx Tt Unefx Addot If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2018, - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - Tool changer positions [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ihsdpfxjxtbgpo Addot Glenn Smeets

Condition: good (used), Year of construction: 2007, FOR SALE 2 HELLER MCi 25.1 Horizontal Machining Centres Ihodpfjyak Hajx Addjt These are precision machine tools renowned for their productivity and reliability, making them particularly suitable for the automotive and aerospace industries. They are engineered for the machining of complex workpieces made of steel, aluminium, and composites. Main Technical Specifications Machine type: Horizontal machining centre. CNC control: Typically equipped with Siemens Sinumerik 840D system. Travel (X/Y/Z axes): Approximately 800 mm / 800 mm / 800 mm. Pallet dimensions: 500 mm x 630 mm. Maximum pallet weight: Up to 800 kg. Spindle speed: Varies depending on configuration, often up to 12,000 rpm or 16,000 rpm. Spindle power: Typically around 30 kW. Tool magazine: Variable capacity, often between 52 and 80 tools, or more depending on options. Machine weight: Approximately 19,000 kg (may vary depending on equipment).

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Ihodpfon Smbrex Addjt Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Control panel base - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 600 mm z-travel 805 mm Control Sinumerik 840D weight of the machine ca. 13 t 1 horizontal machining centre Make: HECKERT type: CWK 500D year 2003 serial no. 16087 control, make: Siemens, type: Sinumerik 840D Isdpfeuddgfox Addeht travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 32,450 Spindle hours 6.080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 340 mm, grinding width: 170 mm, total height: 730 mm, total length: 930 mm, total width: 780 mm, The G115 flat grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, it is also possible to machine inclined or contoured surfaces. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum removal rate: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal travel of worktable: 340 mm Cross travel of worktable: 170 mm T-slot of worktable: 1–12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel increment: 0.025 mm Lateral feed handwheel increment: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the entire machine structure. The grinding head operates smoothly. Iodpfx Ajxb Uq Djddeht Compact design and low noise emissions. A working enclosure is available separately. The machine is lubricated via a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. Special accessories must be purchased separately. PRODUCT INFORMATION: From the proximal end of the main spindle, the radial run-out of the tapered bore axis is 0.01–0.02 mm at a distance of 100 mm.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator Ihedpfon Smclox Addst The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: new, Year of construction: 2025, weight 540 kg diameter 1200 mm height 1100 mm 0 382 l total power requirement 1,9 kW voltage 350/50 V length in total 1820 mm Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Ihsdpfx Ajuddbvoddet Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, Year of construction: 2025, weight 1350 kg diameter 1760 mm height 1240 mm 0 1210 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control Ihodsuddctjpfx Addjt - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, Year of construction: 2025, weight 340 kg diameter 960 mm height 980 mm 0 219 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control Ihedpfxjt U Sffs Addjt - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.