Used Chamfering And Deburring Machine for sale (69,043)

Condition: good (used), Year of construction: 2017, functionality: fully functional, working width: 225 mm, Used deburring machine with a sanding belt and cup brush for deburring. The conveyor belt has been replaced. The machine can be inspected while powered on. Klsdszbhd Sjpfx Al Nju Available immediately.

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Klodpfx Aley Ugd Es Neu

Condition: as good as new (ex-display), Year of construction: 2026, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. Kljdjtr Avijpfx Al Nju The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Condition: good (used), functionality: fully functional, For sale: 1 used facing machine for HSS blades Manufacturer: Loroch Type: AK Blade diameter min/max: 80/710 mm Klsdpfxey Nx Apj Al Nju Pitch: 3-25 mm Grinding wheel diameter: 200 mm Drive motor: 0.55 kW Working speed: 10-45 rpm Coolant Weight: approx. 750 kg Can be inspected in our warehouse upon request.

Condition: excellent (used), functionality: fully functional, Rainer bevelling machine, model 250/6, with fixed angle, max thickness 6 mm, used machine, internal code: SVR 401 Kjdpfxsyv Hyio Al Nslu

Condition: used, Year of construction: 2008, operating hours: 1,019 h, functionality: fully functional, machine/vehicle number: 93.437.268, working width: 1,350 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 7,085 mm, total width: 2,020 mm, total height: 2,295 mm, overall weight: 4,800 kg, working height: 850 mm, input voltage: 400 V, compressed air connection: 6 bar, input frequency: 50 Hz, power: 55 kW (74.78 HP), table height: 850 mm, grinding width: 1,350 mm, input current: 100 A, Equipment: documentation/manual, For sale is a reliable Weber NLC 1350 wet grinding machine from 2008. This machine is specifically designed for high-quality surface finishing of laser-cut, punched, and nibble parts. Thanks to wet grinding technology, excessive material heating is prevented, ensuring consistent results with high precision. Highlights & Features: Precision: Ksdpjy Ar A Nefx Al Nelu Consistent working height and robust modular construction. Versatility: Suitable for deburring, edge rounding, and descaling of both thin and thick sheet metal. Safety: Wet grinding binds grinding dust and increases safety in the production process. Control System: Intuitive user interface for rapid changeover. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Kedpfx Aswbh Dyel Nslu Fintec 128 Tube finishing machine for sale Can be viewed under power with your steel tubes

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, working width: 150 mm, feed rate X-axis: 6 m/min, sheet thickness (max.): 200 mm, working height: 200 mm, Long sheet metal parts up to 150 mm wide, box sections, rectangular tubes, and strips. Deburring, edge rounding, and finish grinding. Kledpfxsy D Nh Es Al Nju Abrasive belt unit (K) TopBrush unit (2TB) Working width: 150 mm Ex-showroom machine!

Condition: used, Technical details: Kodpfx Aswiu Smjl Nslu Weight: ca. 80 kg dimension machine xH: ca. 077 x 0,45 x 0,5 m BRUSH MACHINE *

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material Kledpfx Alju Ngfdo Nsu -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: used, Year of construction: 2023, gebraucht 2023 5542 prompt, Zwischenverkauf v Italien 11600 € 1 1300 mm 150 mm Kedpfx Aowiryhsl Nslu 150 mm 250x350 mm 945 mm 0.75 kW 1400 mm 1000 mm 1450 mm 300 kg Demo machine / mint condition Net price (price for new machine € 13.600,00) Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: * The grinding pressure is applied manually. * When deburring from above, the workpieces are pressed onto the high-grip lid. * Fast processing, low costs The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr. BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Year of construction: 1995, Model: Rotomat 180 Ksdpfx Asw Uabijl Nelu Manufacturer: Egon Wutzke, Zell a. A., Germany Machine type: Bürst-Entgratemaschine (deburring and brushing machine) Article number: 609 101-04 Serial number: 1071 Year of manufacture: 1995 Key components: - Main switch (Hauptschalter) – red knob 0/1 - Fault indicator (Störung) – error warning light - Power indicator (Spannung) – voltage control lamp Brush spindle speeds: - I: 800 rpm - II: 1,600 rpm Working width: approx. 180 mm (hence the “180” model designation) Type of process: Brush deburring (for metal, aluminium, steel, plastics) Power supply: 400 V / 50 Hz (three-phase) Motor power: approx. 2.2 – 3.0 kW (depending on version) Speed settings: 2-stage (800 and 1,600 rpm) Dust extraction connection: Yes (extraction nozzle visible at rear) Safety features: Emergency stop, mechanical interlocks, fault signalling 🔹 Typical applications - Removal of sharp edges after laser cutting, stamping, or milling - Processing of small and medium metal parts - Surface preparation prior to painting, galvanising, or welding For sale: EWU Rotomat 180 Deburring Machine Offering for sale a brush deburring machine EWU Entgrattechnik Rotomat 180, year of manufacture 1995, made by Egon Wutzke (Germany). The machine is fully functional, used, newly serviced, and ready for operation. Technical data: • Model: Rotomat 180 • Manufacturer: Egon Wutzke / EWU Entgrattechnik • Year of manufacture: 1995 • Serial number: 1071 • Motor power: approx. 2.2 kW • Power supply: 400 V / 50 Hz (three-phase) • Spindle speeds: 800 / 1,600 rpm (2 ranges) • Maximum part size: Ø 180 mm / square up to 127 mm • Dimensions: approx. 950 × 1125 × 1270 mm • Weight: approx. 350 kg • Hour counter: [enter actual reading – shown in photo: 4451 h] • Equipment: dust extraction nozzle included Applications: • Deburring and edge rounding of pipes, profiles, steel and aluminium parts • Edge processing after cutting, stamping or milling • Surface preparation prior to painting, galvanising, or welding Condition: • The machine is in good technical condition • Fully functional electrical systems and controls • Ready for work, on-site inspection possible

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The device comes with a new belt, a spare belt, and additional brushes. It includes a complete set of BOECK brushes with sandpaper, as well as extra wire brushes for removing oxides, as shown in the photo. The set also features a complete extraction system with industrial filters (filter ventilation unit) from Keller. Klsdpfox Ht Rvjx Al Neu

Condition: good (used), Year of construction: 1994, Speed: 1500 / 3000 rpm Connected load: 2.4 / 3.7 kW Required space: approx. 1.0 x 0.5 x 1.2 m (L x W x H) Transportation and loading can be organized Europe-wide on request and for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us, our team looks forward to assisting you. Machinery purchase / sale Kljdjy H Ifhopfx Al Nsu PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or are you looking to sell your equipment? For further information or contact options, you can reach us via the contact form.

Condition: good (used), Year of construction: 1996, Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: RSA, Deburring machine type Deburrer DUO -Drive: 2.4/3.7 kW / 1500/3000 rpm -Brush: Ø 255 mm -Brush width: -Dimensions: 440/945/H1185 mm Kodpsyw Sirjfx Al Njlu -Weight: 277 kg

Condition: good (used), Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: Keil, Keil-Single deburring machine with base -Drive: 3.0/2.0 kW / 3000/1500 rpm -Brush: Ø 200 mm, Ø 200-250-300 mm possible -Brush width: 60 mm, 20-40-60-80-100 possible Kledpfx Aorw Daael Neu -Dimensions: 800/800/H1210 mm -Weight: 110 kg

Condition: ready for operation (used), * Brand: SBM Austria * Model: hopper with vibrating chute and screening machine Kodpoywm Rdjfx Al Nslu * Type: Grizzly * Dim. hopper: 6000 x 2500 x 1000 mm * Vibrating chute: length 3500 mm - width 1200 mm. * Driving: 2 pieces vibration motors of each 3,5 kW. * Surface screen: 2200 x 1200 mm. * Driving: 11 kW E-motor.

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 40-200 mm total power requirement: 31,3 kW Kedpfx Aoxc E Icel Nolu weight of the machine ca.: 4 t dimensions of the machine ca.: 1,8 x 2,2 x 1,8 m

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 300 mm gear width: 100 mm max. module: 5 workpiece turning speeds: min work piece - max.: 1100 mm workpiece clamping: auto. tension device number of spindle speeds: 1/min. spindle bearing diameter: 100 mm diameter of spindle flange: 120 mm tailstock travel: 80 mm weight of the machine ca.: 3500 KG Kjdpfx Ajyzh Rasl Nolu dimensions: 1200 x 1450 x 2250 mm total power requirement: 10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility. *

Condition: ready for operation (used), Year of construction: 2010, A Fritz Gross pipe end processing machine is available. Connected load: 11kW, max. pipe diameter: 60mm, weight: approx. 1500kg. An on-site inspection is possible. Kledoy Nm Uyspfx Al Neu

Condition: used, Year of construction: 2015, Technical details: Kodel Ha Ubepfx Al Nelu weight of the machine ca.: 4 t

Condition: excellent (used), Series 12-225-WRD 1st station sanding belt for removing burrs and laser spatter Kljdpfx Aloymlfdj Neu 2nd station disc for light edge rounding Pass-through width 225 mm incl. TEKA extraction system

Condition: excellent (used), functionality: fully functional, Timesavers 22 Series 1100-WBB 1st Station: Abrasive belt for pre-grinding, ideal for removing burrs, laser scale, etc. Optionally, the abrasive belt can be switched to a Scotch-Brite/non-woven belt to achieve a surface finish on the parts. Easy belt change in under a minute thanks to quick-change system. The belt speed is continuously adjustable. 2nd & 3rd Station: Disc brushes for edge rounding, two stations in sequence with both left and right rotation for optimal results. Eccentric mechanism enables lateral oscillation of the disc brush stations (can be switched on or off). Easy brush change using the quick-change system. Disc brush speed is continuously adjustable. Conveyor belt speed is steplessly adjustable. Working width: 1100 mm Maximum part thickness: 100 mm The machine is fully operational and can be inspected and tested under power on site. Kledpfx Aox Uwlaol Nou

Condition: excellent (used), Year of construction: 2026, Timesavers Series 10 Manual Grinder This machine is a demonstration model that has been used occasionally for demonstrations. It features simple operation and comfortable handling. It has a non-slip rubber mat and an additional vacuum field for small parts. Ksdpfxsfhb N Se Al Nelu The speed is continuously adjustable. The machine is in our warehouse and can be inspected, tested, and accepted at any time while powered on.

Condition: new, Year of construction: 2025, working width 1500 mm workpiece width - max. 0,5 - 50 mm dimensions 3300 x 1500 x 1800 mm feed stepless 0-4 m/min total power requirement 20,4 kW weight of the machine ca. 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant working environment without dirt, dust, or noise pollution. Consisting of: - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 grinding belts with P60 Co web - 2x SBM-L 1500 grinding belt L=4123 W=70 P80 Co - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP - Dry extraction DDE 3002 Kljdox H Tvfepfx Al Neu - Standard piping DDE 3002 The machine is available for immediate delivery from our warehouse in Niederlangen.