Used Channel Baler for sale (1,119)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Wiefelstede
785 km
15 kW pressure blower
ElektrorRD 92
Call
Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower, radial fan, pressure blower
-Manufacturer: Elektror, pressure blower radial fan type RD 92
-Drive: 15 kW
-Speed: 2950 rpm
-Volume flow rate: 7500 m³/h
-Pressure: 8300 Pa
-Inlet connection: Ø 220 mm
-Outlet connection: Ø 220 mm
-Protection class: IP 54
-Fan wheel: Ø 720 x 60 mm
Quantity: 1 piece available
Knedpfx Anjwnccqowed
-Dimensions: 960/910/H1075 mm
-Weight: 210 kg
Success:
Your message has been sent.
Listing
Duxford
436 km
Autoclude Model V Peristaltic Pump
AutocludeModel V
Call
Condition: used, This listing is for the Autoclude Model V Peristaltic Pump
The unit is in full working condition and is ready for immediate use
The Autoclude peristaltic pump is a type of tube (hose) pump made by Verderflex / Autoclude. Its defining feature is that only the flexible tube (or hose) inside the pump is in contact with the fluid being pumped. The rest of the pump (rollers, casing etc.) stay clean / isolated. This makes them good for contamination-critical, corrosive, slurry, or shear-sensitive fluids
Design / Key Features
Some of the design / functional features:
Seal-less and valveless: Since fluid is contained within tube, no seals exposed to fluid or valves that could leak.
Self-priming: Can start pumping without needing fluid completely filling the inlet, and often able to handle gas or ‘air’ in the line.
Capable of running dry without damage (when tube material allows) for short durations.
Electrolab Group
Kjdpoxhduxjfx Anwend
Reversible flow: The rotor or drive can reverse, so flow can be reversed to purge lines, etc.
Gentle pumping: Because fluid only contacts tube, and the shearing is limited, better for shear-sensitive liquids / slurries.
Rapid tube replacement
Stackable / multi‑head options: Some “easy tube loading” models allow several pump heads to be driven by a single drive unit, for multi‑channel or sampling/analysis setups
Success:
Your message has been sent.
Listing
Duxford
436 km
Biotek ELx808 Plate reader
BiotekELx808
Call
Condition: used, This listing is for the Biotek ELx808 Plate reader
The unit is in full working condition and is ready for immediate use
Knedpfoxhftvox Anwsd
The BioTek ELx808 is a multi-channel absorbance microplate reader designed for high-precision optical density measurements in 96-well format microplates. Functioning essentially as a microplate-format spectrophotometer, the ELx808 measures light intensity as a function of wavelength—allowing for precise quantification in applications such as ELISA, endotoxin testing, enzyme kinetics, and microbial growth.
This model is suitable for both research and development as well as diagnostic use, and is frequently employed across multiple disciplines including biology, chemistry, and nanotechnology. However, unlike some other microplate readers on the market, the ELx808 is specifically engineered for 96-well plates only and does not accommodate a broad range of labware.

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Success:
Your message has been sent.
Listing
Duxford
436 km
Bioer Quant Gene 9600 Fluorescent Quantitative Detection System
Bioer Quant Gene 9600Gene 9600
Call
Condition: used, This listing is for the Bioer Quant Gene 9600 Fluorescent Quantitative Detection System
The unit is in full working condition and is ready for immediate use
Bioer LineGene Plus 9600 FQD-96A – Fluorescent Quantitative Detection System
Key Specifications
Sample Capacity: 96-well 0.2 mL PCR plates, 12 × 8-strip tubes, or 96 × 0.2 mL single tubes (transparent bottom)
Reaction Volume: 5–100 µL
Knsdpsxhgfgefx Anwsd
Dynamic Range: 1–10¹⁰ copies/µL
Detection Channels: 5 or 6 channels (F1–F6)
Excitation Wavelength: 300–800 nm
Emission Wavelength: 500–800 nm
Temperature Range: 4–105°C (0.1°C increments)
Temperature Control Accuracy: ±0.1°C
Temperature Uniformity: ≤ ±0.3°C
Heating Rate: Up to 4.0°C/s
Cooling Rate: Up to 4.0°C/s
Hot Lid Temperature Range: 30–110°C (adjustable, default 105°C)
Gradient Temperature Range: 1–36°C
Scanning Mode: Full-plate scanning and designated line scanning (5.5 seconds per scan)
Programming: Up to 20 segments per program, up to 99 cycles
Operating System Compatibility: Windows 7/8/10
Software Requirements: Microsoft Excel 2000/2002/2003/2007/2012
Minimum Computer Configuration: RAM: 512 MB; Hard Disk: 10 GB; CPU: Pentium 4; Virtual Memory: ≥1000 MB
Power Supply: 100–240V, 50/60Hz, 600W
Dimensions: 410 mm (W) × 386 mm (D) × 352 mm (H)
Weight: Approximately 20 kg
Certifications: CE, EMC, RoHS2.0, MET
.
Success:
Your message has been sent.
Listing
Rednitzhembach
1,194 km
Band saw
BFSSuper Trad 301 Dual Mode
Call
Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Manual high-performance metal bandsaw with selectable manual or hydraulic saw frame lowering. In autonomous mode, the lowering speed is continuously adjustable via the “Push&Pull” controller. By pulling the controller, the frame maintains the previously selected speed, removing the need to reset it for the next cut.
Standard Features:
- Saw frame made of a robust cast construction
- Heavy-duty round table with cutting channel for mitre cuts from 0°–60° to the right and 0°–45° to the left
- Movable vise with adjustable guide rails and quick-release lever for repeat cuts
Knsdpfoxcnqajx Anwjd
- Oil-bath reduction gearbox with bronze gear and hardened, ground steel worm
- Electric coolant pump for band lubrication and cooling
- Mechanical bandsaw blade tensioning with electrical blade tension monitoring
- Precise blade guidance via adjustable, ground carbide plates and ball bearings
- "Push&Pull" controller for adjusting the lowering speed
- Rotating swarf removal brush
- Precision angle scale for angles from 60° right to 45° left
- Control panel with ready-to-operate indicator, main/speed selector switch, and switch for manual or autonomous lowering mode
- Emergency stop button at knee height for optimal accessibility
- Microswitch in the handle for starting motor and pump (dead-man function in manual mode)
- Safety switch on the saw frame guard and blade tensioning carriage
- Limit switch for automatic motor shutoff after cutting
- Length stop for repeat cuts
- Material support on the infeed side
- Bi-metal saw blade
- Tools and user manual
Technical Data:
- Pole-changeable 400 V three-phase motor, 1.1/1.5 kW
- 2 cutting speeds (33/66 m/min)
- Vise clamping width: 305 mm
- Working height: 940 mm
- Saw blade dimensions: 2750x27x0.9 mm
- Weight: 380 kg
Cutting capacity in mm:
90° 255 250x250 300x200
45° R 190 180x180 190x170
60° R 110 110x110 150x110
45° L 160 140x140 170x120
Discover more used machines
Success:
Your message has been sent.
Listing
Coesfeld
796 km
Vacuum tank truck
MERCEDES-BENZArocs 3251 8x4 NEU ! KROLL ADR-Kombi 4-Achser
Call
Condition: used, mileage: 500 km, power: 375 kW (509.86 HP), first registration: 12/2025, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT
Internal number: #398
Mercedes-Benz Arocs 3551 8x4 with Combined High Pressure Jetting and Suction Pressure Tank Body ADR Type K 1.0-18.0 / 28 PE
This Mercedes-Benz Arocs 3251 8x4 with KROLL ADR combined jetting and suction pressure tank body is a NEW vehicle, built for the highest performance requirements. With VacuStar WR 3100, Uraca KD 718, large hose storage cassette, DN125 telescopic boom, and complete ADR L4BH equipment, it is immediately ready for demanding sewer, industrial, and hazardous goods applications.
Body
• Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH
• Tank material: S355J2+N (St 52.3)
• ADR suction/pressure tank Type K 1.0-18.0 / 28 PE
• Ejector piston with 3 locking positions
• Suction from open waters possible (“comfort version”) via boom cassette with integrated filter
• Tanker equipment ADR – Type class AT/FL L4BH
• Discharge via pneumatically actuated piston
• Sludge water outlet DN80 for backflushing via the boom into the channel
Vacuum System
• CVS VacuStar WR 3100 – approx. 3,100 m³/h at 400 mbar
• Approx. 20 m HD hose DN125
• Hose storage cassette with simultaneous telescopic boom DN125
• Parallel routing of suction and HD hoses over the boom
• Reach on hit side: 5,200 mm
• Hydraulic suction hose reel on the right with 30 m DN75, fully passable
High-Pressure System
• Uraca KD 718 – approx. 315 l/min at 170 bar
• Large HD hose reel for 240 m DN25, 180° swiveling
• Equipped with 160 m DN25
• Small HD hose reel for 80 m DN13, hydraulic
• Equipped with 80 m DN13
Special Features
• Hose storage cassette with telescopic boom DN125
• Continuously adjustable suction hose height (hydraulic, roller guide carriage)
• Hydraulic, telescopic, 180° swiveling boom arm
• Electric cable winch on the boom
• ADR L4BH, including EX/II, EX/III and AT
• Spray gun
• LED beacons
• LED ambient lighting
• CAN-BUS remote control for work functions
• Radio remote control with 14 functions
• Hot water hand washing unit
• Large locker rear left (e.g. for push camera)
• Reversing camera
• Sound insulation for pump compartment
• Large equipment box
• Toolbox
• Holder for traffic cones
• Vice
• Ladder
• Large advertising boards right & left
Special Equipment
• Axle load measuring system
• Digital radio DAB/DAB+
• ADR equipment package
• Right-hand outer mirror with maneuvering position
• 220 Ah battery
• Interactive multimedia cockpit
• 24V / 100A electrical pre-installation cab
• High beam and cornering light assistant
• Movable cab entry
• Front suspension: 9.0 t / 4-leaf
Knedpfoxc Sz Nex Anwsd
• Remote online query function
• Tinted windshield with band filter
• Vehicle without trailer coupling
• ADR hazardous goods version Type FL
• Speed limiter
• 16-speed gearbox G 280-16
• Gearbox lock (independent of transmission)
• Rear axle ring gear 300
• 3-piece mudguards with splash protection
• Fuel tank 290 l aluminum, left
• Cool box / refrigerator
• Cooling package for hot regions
• Front air intake
• Reinforced engine brake
• Trailing axle: 9 t steered, relievable, liftable
• Navigation system
• PTO – smooth flange
• PTO independent of transmission and dependent on clutch MB 1.65
• Programmable special module
• Wheelbase variant 3,900 mm
• Frame overhang 1,200 mm
• Re
Success:
Your message has been sent.
Listing
Stuhr
833 km
Car trailer
AnssemsASX 2500 325x178 Hochlader mit Auffahrsc
Call
Condition: new, functionality: fully functional, empty load weight: 500 kg, maximum load weight: 2,000 kg, overall weight: 2,500 kg, loading space length: 3,250 mm, loading space width: 1,780 mm, loading space height: 300 mm, Product Information "Anssems ASX 2500 325x178 Platform Trailer with Loading Ramps"
Tandem axle platform trailer from manufacturer ANSSEMS, model ASX2500 325x178.
Kedpewuzx Defx Anwsnd
Standard features of the Anssems flatbed trailer include brakes, all-aluminium side panels that are foldable and removable, a pair of loading ramps stowable under the loading floor, robust eccentric latches, external and internal lashing rings, profile channels for accessories or load securing devices, a highly stable welded steel frame, extendable supports for the tailgate, jockey wheel, and a V-drawbar.
We also offer accessories for Anssems car trailers such as high tarpaulins, flat tarpaulins, net hooks, mesh extensions, side wall extensions, rear support leg sets, accessory boxes, straps, and coupler locks.
-----
With us, you can also obtain the following services:
· Financing
· Leasing (business customers only)
· Consulting
· Nationwide delivery (excluding islands in Germany)
· Accessories
· Rental trailers
· Spare parts
· Registration service for DH – HB – DEL
· Service
· Repairs
· Technical inspection (TÜV) for car trailers
PKW-Anhänger-Center Ahrens
Moordeicher Landstraße 37
28816 Stuhr near Bremen
Opening hours: Monday - Friday 8:00 am – 5:00 pm
Success:
Your message has been sent.
Listing
Petershagen
875 km
Tipper semitrailer
KEMPFSKM 36/3 AK 3-Achs Alu Sattelkipper 50m³
Call
Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,430 mm, loading space height: 2,300 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, KEMPF SKM 36/3 AK – 3-Axle Aluminum Tipper Semi-Trailer 50m³ – New Vehicle
----Vehicle Data Manufacturer: Fahrzeugbau KEMPF GmbH
* Model: SKM 36/3 AK
* Design: 3-axle tipper semi-trailer with aluminum box body
* Target market: Germany
* Permissible total weight: 36,000 kg
* Axle load: 3 × 8,000 kg
* Fifth wheel load: approx. 12,000 kg
* Nominal coupling height, loaded: approx. 1,200 mm (technically possible 1,200–1,260 mm)
* Loading length: approx. 9,000 mm
* Loading width: approx. 2,430 mm
* Body height: approx. 2,300 mm
* Body volume: approx. 50.3 m³
* Total height: approx. 3,710 mm to loading edge (loaded)
----Paint / Design Chassis: Deep black RAL 9005
* Attachments: hot-dip galvanized and black powder coated
* Axles and wheel hubs: black (KTL-coated)
Ksdsxn Eb Hjpfx Anwend
* Body: White aluminum RAL 9006
* Tarpaulin: Silver No. 911 (Mehler)
* Contour marking on sides (white) and rear (red) according to EC directives
----Chassis and Running Gear Frame: High-quality welded construction from fine-grained steel, conically cranked (approx. 80 mm)
* Axles: SAF INTRADISC plus Integral – offroad version, disc brakes Ø 430 mm
* Lift axle: 1st axle fully automatic, liftable, with forced lowering when empty
* Air suspension: Air suspension assemblies with small air bellows (300 mm), plastic covers
* Air tanks: Aluminum version
* Support legs: 2 aluminum drop legs, max. 24 t (2 × 12 t)
* Mudguards: PVC half-shells with rigid spray suppression
* Toolboxes: 2 pieces PVC, black, each approx. 660 × 500 × 460 mm
* Side underrun protection: right side
* Ladder: removable, aluminum, approx. 4,000 mm long
* Access ladder: extendable at the rear (not UVV compliant)
----Underrun Protection and Rear Foldable steel underrun protection according to ECE R58.03
* With spring lifting aid and integrated tow eye
* Continuous KEMPF splash guard with large reflective panel (200 × 1,130 mm)
----Lighting and Electrics Complete LED version according to ADR standard
* Marker, position, reversing, and rear fog lights in LED
* 2 LED work lights (left/right)
* Cargo area lighting with switch and indicator lamp
* 15-pin electrical connection
* Round lamps with chrome rings
* Without reversing camera
----Tires Rims: Alcoa Ultra ONE alloy wheels, Dura-Bright EVO, offset 120
* Tires: 385/65 R 22.5, brand according to Kempf's choice
----Braking System and Safety Electronic braking system (EBS) Wabco with RSS (Roll Stability Support)
* ABS 4-channel (4S/2M)
* Parking brake via spring-loaded cylinders
* Axle load display via EBS CAN bus (display in cab possible)
* Trailer information module SmartBoard (Wabco)
* Tire pressure monitoring system (TPMS) according to ECE R141
----Hydraulics Hydraulic front tipping cylinder (Hyva), operating pressure 190 bar, single-circuit hydraulic system
* Smallest piston hard-chromed
* Hydraulic connection: Edbro 1" quick coupling, screwed
----Superstructure / Body Aluminum rear tipper body made of hollow profiles
* Front wall: 20° sloped, approx. 5 mm thick, with robust brackets for front press
* Floor: approx. 7 mm thick, annealed aluminum
* Side walls made of aluminum hollow profiles, continuous inner lining 2.5 mm, welded
* Rear wall: straight, pendulum type, two-wing (2/3 left, 1/3 right), automatic pneumatic locking
* Rear wall control: left switch (pendulum function), right switch (door function)
* Grain-tight design
* Slide: approx. 400 × 400 mm, lever operated to the left
* Dust bag with adapter frame (hopper approx. 250 mm high)
* Catwalk with handrail acco
Success:
Your message has been sent.
Listing
Saarbrücken
985 km
Textile printer
M & RSportsman EX 8/6
Call
Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer:
M&R Sportsman EX 8/6 textile carousel, built in 2013
Total print count: 1,168,378
Diameter: 386 cm
Weight: 1,497 kg
Kedjv Iy H Ijpfx Anwend
Power supply: 380 V
Pallets: Textile - 40 x 55 cm, 8 pieces
Pockets - 30 x 40 cm, 8 pieces
Sleeves - 15/12 x 40 cm, 8 pieces
Squeegees: 6 x flood and 6 x pressure squeegees
Screen fit with TRI-LOC
M&R Radicure D 36/6-3 conveyor dryer, built in 2012
Conveyor width: 91 cm
Drying channel length: 183 cm
Total width: 127 cm
Total length: 305cm
Weight: 817kg
Power supply: 380V
Price negotiable
Success:
Your message has been sent.
Listing
Stuhr
835 km
Emptying of wire mesh boxes
unbekanntunbekannt
Call
Condition: good (used), functionality: fully functional, Gitterbox emptying, pneumatic, for gitterboxes 1200 x 800 mm
Dimensions: 2200 x 1700 x 2250 mm (LxWxH)
Weight approx. 1500 kg
Note:
The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above in the pictures, or on our website or our YouTube channel.
Knsdpfxsv Nhk Do Anwed
Inspections, even under power, are possible at any time by arrangement. Video calls are possible on request.
We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m.
Please note:
All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors.
The offers are non-binding, subject to prior sale and can be revoked at any time.
Viewings are possible by arrangement.
The sale takes place ex location, without warranty or guarantee.
Our payment terms are 100% advance payment.
Success:
Your message has been sent.
Listing
Hamburg
891 km
Filling System
AMTECSAMPLE-SYS COUNTFIL 1
Call
Condition: new, Year of construction: 2025, Sample system for capsule and tablet counting and filling. The system includes a vibration and multi channel feeder, PLC control system, dynamic scan counting, bottle/can transfer unit. - Specifications: Range of counting 20-999 pcs; counting and filling speed: max. 4000 tablets/min; final output: 50-100 bottles/cans per minute; max. product diameter: 13mm; max. product length/thickness: 6mm; typical bottles sizes: diameter 45-60mm, height 50-100mm; 380V, 1.2kW. Please note: This is a sample system only. The final specifications will vary. - Please let us know your product datails (product size and shape, required speed , working stations, etc.) to prepare a suitable quotation for you.
Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Ksdev Nlc Dspfx Anwond
Success:
Your message has been sent.
Listing
Tarnów Opolski
1,531 km
Bale press
Bramidan, Aventek, Orwak4-OF
Call
Condition: ready for operation (used), Bramidan 4-0F
Knodpfx Aev Ai Uqonwsd
Engine: 4 kW
Press dimensions: 250 x 100 x 255 cm
Bale dimensions: 1100 x 700 x 950 cm
Bale weight: 200-250 kg
Pressure: 18 tons
Weight: 1580
This machine is used to reduce the volume of waste such as film, paper, etc.
Price: 4800 EUR
Aventek MK 2500 baler
This is an industrial baler for compressing waste such as:
film
cardboard / paper
plastics
pressing force: 25 tons
bale weight: 400 kg, depending on the material
bale dimensions: approx. 1200 × 800 × 800 mm
cycle time: approx. 50 s
power supply: 400 V
engine power: approx. 5.5 kW
Year: 2013
Price: 6800 EUR
ORWAK 9020 baler:
- 2.2 kW motor - 380V
- 20-ton pressure
- bale dimensions: 1100x700x800
- bale weight: depends on the raw material, 200-300 kg
Price: 5500 EUR
Success:
Your message has been sent.
Listing
Tarnów Opolski
1,531 km
Bale press
Bramidan OrwakB3, B5, 3100, 3105
Call
Condition: good (used), Brand: BRAMIDAN
Model: B3
Width (cm): 94
Depth (cm): 72
Height (cm): 198
Weight (kg): 310
Power (kW): 1.1
Voltage (V): 230
Chamber width (cm): 70
Chamber depth (cm): 50
Chamber height (cm): 110
Year of manufacture: 2010-2015
Pressing force (t): 3
Noise level (dB): 69
Price: 2000 EUR
B5 - Ideal for large boxes:
High performance – high throughput
Bales are ejected automatically
Belt rollers positioned at the front for easy belt replacement
Knjdpfev Akr Rsx Anwjd
Weight of cardboard bale (kg): 80-110
Weight of plastic film bale (kg): 90-130
Bale size (W x D x H) (mm): 1000 x 700 x 800
Pressing force (t): 5
Power supply: 1x230V 50Hz 10A
Motor (kW): 1.1
Noise level (dB): 65-68
Average cycle time (sec): 33
Dimensions (W x D x H) (mm): 1360 x 895 x 2370
Weight (kg): 600
Feeding opening width x height (mm): 1000 x 500
Year of manufacture: 2014-16, cost: 3800 EUR
Orak 3100 baler costs 2000 EUR
Orwak 3105 baler costs 2200 EUR
Success:
Your message has been sent.
Listing
Gerolzhofen
1,110 km
Mobile deduster
SchukoVacomat 140/60 XPe
Call
Condition: new, Description:Vacomat 140/160 XPe- The Vacomat 140/160 XPe mobile dust extractor is our smallest model and ideal for single machine extraction. Air volumes of up to 1,593 m³/h can be conveyed with this extraction system using the vacuum method,e.g. for dedusting sliding table saws, jointers or thicknessers.- In the standard version, extraction is started manually at the push of a button. On request, an automatic start of the fan can be installed when the connected processing machine is switched on,so that the extraction system is not forgotten or unnecessarily operated in idle mode.- The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container.- The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure load cell and ensures maximum operational filter cleaning system- In the Vacomat 140/160 XPe, an integrated control cabinet ensures that the filter bags are cleaned electro-mechanically via a vibrator motor.- The control system is activated by querying the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaking starts automaticallyNo connection to compressed air and therefore no compressor is required for this regeneration mechanism. This results in a significant reduction in the noise level during cleaning.- An efficient pressure shock cleaning system (XPe-D) is available as an option, especially recommended for very high and particularly fine dust content (ATTENTION: overall height then 100 mm and length 280 mm).Cleaning via the compressed air tank takes place offline, after extraction UKOCONE FILTER- The Vacomat 140/160 XPe mobile dust extractor is equipped with patented SchukoCone® filter bags as standard.- The SchukoCone® filters are a successful combination of an externally loaded filter bag with an internally loaded cone. This innovative filter design offers approx. 60 % more filter surface area with a smaller surface area requirement.- SchukoCone® filter bags unfold their enormous potential particularly with fine dusts, where a large filter surface area and low filter surface load must be ensured.- By reducing the filter surface load, a longer service life of the filter is achieved. If the filter resistance is low, less fan power and therefore less electricity is EMBLY
Kjdpfxevwflne Anwsnd
Success:
Your message has been sent.
Listing
Augsburg
1,249 km
Machine package
BUETFERING, HEESEMANN, BarberanLackierung & Oberflächenbearbeitung
Call
Condition: used, No. 3198
Machine package painting & surface treatment BUETFERING, HEESEMANN, Barberan
Used
Consisting of:
- Wide belt sanding machine BUETFERING Classic 313 - QCE
- UV lacquer roller Barberan BRB - 1400
- Drying channel Barberan HOK - 14/2
- Lacquer sanding machine HEESEMANN FGA 8
- Suction unit Schuko Vacomat S/N 25/45
Technical data:
- Wide belt sanding machine BUETFERING Classic 313 - QCE
Used, year of construction 2000
Sanding width 1350 mm
Sanding belt width cross belt 150 mm
Sanding belt length cross belt 4700 mm
Sanding belt width wide belt 1370 mm
Sanding belt length wide belt 1900 mm
Workpiece thickness 3 - 150 mm
Feed infinitely variable 2.5 - 13 m/min
Power cross belt 15 kW
1st wide belt 12.5/16 kW
2nd wide belt 11 kW
Total connection 49 kW
Sanding of veneered workpieces with the cross sanding unit and the link pressure beam in one or two passes
Precise calibration with the contact roller of the 2nd unit
Sanding solid wood: 1st pass with the contact roller / 2nd pass with the cross sanding unit and the link pressure beam
Weight of the machine 4500 kg
- UV lacquer roller Barberan BRB - 1400
Used, year of construction 2006
For application of primer and top coat
- Drying channel Barberan HOK - 14/2
Used, year of construction 2006
With half pressure lamp made of mercury or gallium, with an output of 80 W/cm or 120 W/cm
Elliptical point reflector, air cooled, made of aluminum
Air cooling system for each lamp or reflector
- Lacquer sanding machine HEESEMANN FGA 8
Used, year of construction 1994
Multi-purpose surface sanding machine
1 sanding belt, oscillating
Sanding belt width 1350 mm
Drive 11 kW
Workpiece height max. 140 mm
Sanding belt dimensions 2620 x 1350 mm LW
- Suction unit Schuko Vacomat S/N 25/45
Used, year of construction 2000
Filter area 45 m2
Sale on behalf of the customer, ex location near 86156 Augsburg, without dismantling, without transport and assembly
Dismantling, loading and transport by us optionally possible
Errors in the description and price excepted
To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended
Sold as is
Kedpfx Aovxrynenwsnd
Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: “purchased as seen”
Pictures and videos serve as examples and do not represent the actual scope of delivery
Terms of payment: Prices plus VAT, payment before collection or dispatch
Terms of delivery: ex location
Success:
Your message has been sent.
Listing
Stuhr
833 km
Lowbed
AnssemsAnssems BSX 1350 251x130x150cm Planenanhänger
Call
Condition: used, empty load weight: 300 kg, maximum load weight: 1,050 kg, overall weight: 1,350 kg, loading space length: 2,510 mm, loading space width: 1,300 mm, loading space height: 1,500 mm, tire size: 195/70r14c, Sturdy, braked low-loader with a high cover, manufactured by ANSSEMS, model BSX1350 251x130.
As standard equipment, the Anssems covered trailer with brakes features aluminum sideboards, a cover and frame, internal locking mechanisms, external lashing points, profile channels for mounting accessories or securing the load, a very stable welded steel frame, side rails, a front headboard, a front flap, pull-out supports for the tailgate, a support wheel, and a V-drawbar.
We also offer accessories for Anssems car trailers, such as a flat cover, net hooks, a corrugated grid attachment, a sideboard attachment, a rear support set, a toolbox, lashing points, lashing straps, and a lock.
---
Ksdsgf Nxzjpfx Anwjnd
You can find all our cost-effective offers on our website.
Germany-wide delivery is possible (except for the islands)! Please ask us for the prices.
---
PKW-Anhänger-Center Ahrens
Moordeicher Landstraße 37
28816 Stuhr near Bremen
Tel: 0
Fax:
Pick-up times: Monday - Friday – hours
Pick-up is not possible on Saturdays!
Success:
Your message has been sent.
Listing
Hryniewicze
1,737 km
Semi-auto knife sharpening machine
GRAFSSR Semi-Auto
Call
Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland.
All our machines are in 100% build in GRAFS factory in Poland.
We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for:
- different recycling blades,
- chipper knives, (ALBACH, JENZ, BRUKS),
- planer knives,
- guilotine blades,
Knsdpfegwct Dox Anwed
- shredding knives,
- granulator blades,
The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm
Sending inquiry to us, please let us know what grinding length you need.
TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR:
• Hand wheel for down feed of the grinding motor,
• Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm)
• Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes).
• Grinding wheel motor angle adjustment within 0–10° (for surface grinding).
• Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives.
• Exchangeable hardened steel guide strips on the machine guides ensuring long service life.
• Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever),
• Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles.
• Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement.
• Reversal of grinding wheel rotation,
• Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included,
• Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws.
• Automatic external magnetic coolant cleaner – MS60.
• Variable carriage speed smoothly adjustable in the range 1–12 m/min.
• Carriage run adjustment knob (potentiometer) for fine control.
• Precision scale for downfeed / grinding motor position measurement.
• Precision scale for blade angle measurement.
• Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity.
• Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021.
• Adjustable anti-vibration leveling feet.
• LED lamp in working area.
• Very compact electric cabinet at the back of the machine base / body.
• Coolant through the 2 nozzles either side of the grinding wheel,
• Packing, shipment preparation, and truck loading included.
FUNCTIONS INCLUDED:
• Automatic down feed with mechanical feed system by ratchet,
• Grinding wheel motor angle adjustment 0–10° (surface grinding option).
• Smooth adjustment of carriage/head speed 1–16 m/min.
• Manual positioning of the grinding head over the workpiece.
• Carriage relative movement in the Y-axis.
• Capability of grinding knives up to 360 mm in height.
• Quick up/down travel of the grinding motor for fast setup and wheel replacement.
• Automatic coolant filtration system.
We are a producer from Poland, we provide after sale support and service with 12 month's warranty.
Success:
Your message has been sent.
Listing
Brakel
926 km
BTS-Plastic Foil Compactor
BTS-Folienverdichter
Call
Year of construction: 2026, condition: new, The BTS-Plastic Foil Compactor is the solution to keep large bulky packaging film under control. With its space-saving footprint and secure stand you can easily reduce all foil waste to a minimum of volume. The retaining ring in the plastic foil compactor prevents annoying expansion so that the foils stay where they belong. The filled bags can be baled by using a waste baler or disposed of in a recycling bin.
By collecting and compacting this valuable and recyclable material you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle.
Foil Compactor size: 1000 H x 450 W x 420 D mm
Knedpfx Ansdzvhwjwsd
Foil Compactor weight: 5.5 kg
Foil Compactor colour: RAL 9006 silver
Foil Compactor Bag volume: 240 Ltr.
Foil Compactor Bag weight capacity: up to 15 kg
Easy collecting the packaging films
Clean and safe working environment
Retaining ring prevents the annoying material expansion of the foils
Optimum utilization of bags
Reduces frequency of waste collection
A quality product “Made in Germany”
Suitable for collecting and compacting
Bulky packaging films and foils
Foam foils
Optional extras
BTS-Foil Bags 240 Ltr.
Plastic Foil Compactor colour RAL
(minimum order 40 units)
BTS-Waste Baler for plastic film and foils
Plastic Film Compactor, Foil Compactor, Plastic Film Collector, Foil Collector, Sack Holder
Success:
Your message has been sent.
Listing
Lüdenscheid
870 km
Barfeeder
IEMCAPRA 40/42 P
Call
Condition: good (used), Year of construction: 1990, - For connection to multi-spindle turning centers
- Storage: Flat magazine, 4 x 450 mm capacity
Ksdpfx Anjihhz Rowend
- Bar diameter: 4-52 mm (depending on the guide channel)
- Guide channel diameter: 44 mm
- Bar length: approx. 3000-4200 mm
- Dimensions L x W x H: 4600 x 750 x 1300 mm
- Weight: approx. 850 kg
Success:
Your message has been sent.
Listing
Mudersbach
912 km
Drilling machine
BernardoSB 40 Profi
Call
Condition: new, Bernardo Vario Pillar Drill SB 40 Profi
Technical Specifications
Drilling capacity max. 40 mm
Drill chuck 1 – 16 mm / B 18
Morse taper MK 4
Spindle speed, stepless 90 – 1455 rpm
Overhang 320 mm
Drill table swiveling -50° to +50°
Distance spindle / table max. 590 mm
Distance spindle / base plate 1155 mm
Quill stroke 160 mm
Quill feed 0.1 / 0.2 / 0.3 mm/rev
Column diameter 120 mm
Table size / T-slot size 505 x 425 mm / 14 mm
Base plate working area 360 x 370 mm
Motor power 1.0 / 1.5 kW
Machine dimensions (W x D x H) 500 x 930 x 1870 mm
Weight approx. 380 kg
Features
Vario drive for precise speed adjustment
Quill feed can be done manually or via mechanical feed
Easy tool change due to automatic tool ejector
Set speed can be quickly and easily read via digital display
Solid, swiveling gray cast iron table with T-slots and coolant channel
Knsdpfx Anjd Hxk Njwsd
Coolant system and lighting included
Adjustable drilling depth stop, drilling depth can be read via scale
Right-hand/left-hand rotation for thread cutting
Scope of supply
Drill chuck arbor MK 4 / B 18
Coolant system
Digital speed display
Quick-change drill chuck 1 – 16 mm / B 18
Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1
LED machine light
Automatic tool ejector
Height-adjustable protective shield
Success:
Your message has been sent.
Listing
Aalen
1,178 km
Fitting centre
RUCHSERMontagelinie Video
Call
Condition: new, Ruchsr Assembly line consisting of:
Item 1.0 /
RU-CBM 4000 work table
with running rail extended by 500mm for additional assembly
an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD
with RU-SH special screwdriver, support table
Length 4000 mm, width 1400 mm, inclination of the working platform
manually adjustable. Holder for fitting scissors or fitting punch.
16 pieces of swiveling counter-holders for hanging the wings, completely
pneumatic
Foldable for unhindered movement of the wings on the table surface.
Device for scanning the sash fitting length for constant and
variable/central gear seat for already drilled wings, colored
Dimension recognition of the fittings.
RU-SH, special screwdriver with pneumatic depth switch on carriage
mounted, safety control, pneumatic height adjustment,
Screw feeder with automatic shutdown of the filling container
(Manual insertion for a second screw length on the special screwdriver upon
request).
RA-8, turret stop for 8 screw levels mounted on the carriage.
RA-4, turret stop for 4 different wing widths
Swivel table mounted.
Pneumatic wing measurement sensing. operated, scanning range up to 2500mm
simultaneous clamping of the scanning.
PSF - Pneumatic tensioning device for sashes.
Working height adjustable from 900 - 1000 mm.
Support table covered with felt. Running rail extended to the left by 800 mm.
Item 1.1 / 5035-1
Pneumatic swivel device of the work surface with foot valve
Item 1.2 / 0500000
Holder matched to customer punch/scissors.
For mounting a hardware punch provided by the customer or
Fitting shears (third-party manufacturer) on the sash assembly table.
Please specify make when ordering!!!
Item 1.3 / 5597-7
Driving device for RU-CBM on semicircular rails.
The castors are on the left and right of the base frame
of the table mounted.
Item 1.4 / 6354-6
3 double meters of semicircular rails 30 x 10 mm.
Item 1.5 / 0730000
RU-SBL3000/40 free-standing fitting bearing,
Length 3100 mm, depth 1250 mm, height 2200 mm,
Stand frame on the front without supports,
40 compartments, divided into 10 compartments in a row by dividers
and a continuous shelf at the top,
Compartment size: width 280 mm, height 150 mm.
Item 2
RU-CSA-SMB aluminum holder screwing machine with automatic
Screw feeding and manual feeding of the aluminum holders from one
traveling box with pneumatic positioning device,
Screwdriver with depth cut-off with 4-fold turret stop.
Pneumatic adjustment device in the y direction against 2 pieces 6-fold
Revolver attacks. Feed container for manual feeding of rotary holders
or clip holder in square shape 18.5 x 18.5.
The holder is manually pushed into a channel in the box and with
Kedpfxed Ih Hue Anwond
positioned in front of the screwdriver mouthpiece using a pneumatically
operated slide.
Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm.
Item 3
RU-S48-A6-350 column slewing crane
for chain hoist, with 6 m aluminum boom
Version with column, smooth-running boom
and sliding chassis for swivel and trolley travel
manually by pulling and pushing the load.
Projection 6 m
Construction height 4,461 m
Lower edge of boom 3.722 m (top edge of boom 3.9 m)
Swivel range max. 270°
Painting of the steel construction in RAL 7035
The base plate is attached to the on-site hall floor
At least 250 mm thick.
Designed, of course, according to the valid STANDARD EN 13155...
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Germany
1,034 km
Band Saw - Automatic - Horizontal
BERG & SCHMIDGBS 255 VA-I CNC
Call
Condition: new, capacity 90 degrees: round 255 mm
capacity 90 degrees: square 240 mm
300 x 180
saw band length 2.765 x 27 x 0,9 mm mm
table height 870 mm
band speed 18 - 110 m/min
Control CNC
total power requirement 1,5/1,8 kW
weight of the machine ca. 0,63 t
dimensions of the machine ca. 1,8 x 1,85 x 1,85 m
Miter band saw, fully automatic GBS 255 Super VA-I CNC
• miter left 45° automatic operation
• miter left 60° semi-automatic operation (cuts without programming)
• Material height sensor (automatic cut start detection)
• Frame and gearbox made from one piece, very quiet cut and very low vibration
• Removable chip tray (disinfection)
• Shockproof and ergonomic control panel with oil-resistant EPDM cover
• High performance positioning with incremental encoder (CNC) c.
• Top access to the saw, material and feed unit
• Hinged safety cover
• Fine feed adjustment
• Semi-auto. Cut!
• Optimize work processes with CNC control
Possibility to enter various parameters such as quantities and material
lengths,
automatic calculation of the cutting channel
Kjdpfxod Iipze Anwjnd
• CNC control for 10 different saw programs with 99 sub-programs for
different lengths and quantities, e.g. 1 cutting program with various
section lengths
• Automatic feed unit (CNC) via ball roller spindle incremental feed
with automatic length compensation. Adjustable for section lengths of
2 mm to 9,999 mm, remainder length 170 mm.
Success:
Your message has been sent.
Listing
Göd
1,771 km
Briquetting press
Mekom Kft.MiniBRIK
Call
Condition: new, Year of construction: 2025, Small hydraulic briquetting press. Main motor is 4 kW, briquette diameter is 50mm. Capacity of the press is 30-50 kg/hour. The machine is new, and has CE certificate. Customer can order it with oil cooler. For more information visit our YouTube channel, webpage or Facebook site.
Kodpfx Anofk N Tpowend
Success:
Your message has been sent.
Listing
Wiefelstede
785 km
Control unit
Eurothermnanodac
Call
Condition: good (used), Control unit, heating controller, osmosis control control box, heating controller, heating control device
-Eurotherm: nanodac 4-channel curve recorder
-Heating control system for: 2 heating fields
-Table control unit with: 380 V connector
-Number: 3x available
Ksdpofd Iuaofx Anwjnd
-Price: per piece
-Dimensions: 560/540/H300 mm
-Weight: 26 kg/piece
Success:
Your message has been sent.
Listing
Hryniewicze
1,737 km
Automatic knife grinding machine 2400 mm
GRAFSGR-2400e
Call
Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 2,400 mm, total length: 3,500 mm, grinding width: 180 mm, grinding wheel diameter: 250 mm, Equipment: documentation/manual, GRAFS GR-2400e is heavy-duty straight knife grinder / vertical surface grinder with swiveling electromagnetic chuck, suitable for a broad range of industrial knives, such as guilotine knives for metal, granulator blades, veneer knives, chipper knives, planer and paper and knives HM / HSS for paper cutters. We are a sharpening shop for over 12 years. All our machines are in 100% build in GRAFS factory in Poland.
TECHNICAL FEATURES / MAIN ADVANTAGES:
• Mitsubishi Touch Screen operation panel HMI 7";
• Mitsubishi PLC,
• Mitsubishi Inverter for carriage run adjustment / feed,
• Internet communication system with GRAFS technical support in case of any problems,
• Grinding wheel motor 11 kW (15 HP), 400-3-50 Hz;
• Grinding wheel Ø250mm corundum in aluminum base, (segment grinding
wheel upon request);
• Reversal of grinding wheel rotation;
• Electromagnetic chuck 180x2400 mm; Surface grinding 180x2400mm,
• T channel on the other side of the chuck (from operator side),
• Angular divisor for magnetic table rotation ±120°;
• Fast grinding wheel descent and
ascent (by switches) and slow approach by hand wheel;
• Motorized automatic grinding wheel downfeed,
controlled by Mitsubishi PLC (0.001-0.05 mm);
• Automatic work cycle (roughing, sparkout);
• Variable carriage speed from 1 to 16 m/min;
• Coolant through 2 nozzles either side of the grinding motor;
• Longitudinal grinding head angle adjustment from 0° to 5°; (flat surface grinding possibility),
• External tank with pump;
• Magnetic cleaner / filter MODEL MS,
• Fast grinding wheel exchange system, grinding wheel adapter with 3 securing screws,
• Exchangable hardened steel strips on machine body guides, 2 at the top, and 2 at the bottom of main guide.
• Carriage rollers from INA, on on the regulated cam,
• Heavy body of the machine (steel plates 10 mm thick), build in cell design,
• Electric cabinet on Shneider components,
• Secure cover of the grinding wheel with magnetic interlocks,
Knjdpfx Anod Tc Haewjd
• User manual and control panel menu in Polish / English / German / Czech / Spanish / French,
• Machinery LED lamp in working area,
UPON REQUEST:
• Different types of knives mounting,
• Coolant cleaner with automatic paper filter,
• Main grinding motor can be 5.5 kW, 7.5 kW and 11 kW,
• The knife sharpening machine model GRAFS GR can be supplied in 4 different grinding lengths: 1.200 mm, 1.800 mm, 2.100 mm and 2.400 mm.
• Accordion covers on whole body of the machine,
• Mist collector,
We provide an European Declaration of Conformity and all documents.
The machine is new, we are a producer from Poland, we provide after sale support and service with 12 month's warranty.
We make it easier for you to find: "channel baler"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Channel Baler (1,119)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month


























































































































































































































































