Used Chip Screen for sale (12,561)

Condition: new, Year of construction: 2025, The manufacturer guarantees the quality of purification. A certified control cabinet allows for constant monitoring of the correctness of operation. The negative pressure fan 11 kW / 11300 m3/h, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust absorber Bodpfxeudalws Aflelr the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility of building a ceiling system and connecting several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile drive system facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% airtightness of the system, have also been equipped with a mobile system mobile Control cabinet for switching the device on/off The polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 11 kW Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 960 mm Number of filters 64 pieces Inlet diameter 350 mm Outlet diameter 500 mm Efficiency 11300 m3/h Dimensions (width x length x height) 1190 x 3160 x 2320 mm (without upper elbow) Net weight 710 kg

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, total length: 3,000 mm, total width: 1,500 mm, total height: 2,200 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 1,500 kg, 1. very precise, fully automatic screen printing machine with an automatic feeder feeder that positions the sheet with an accuracy of 0.08mm. Blsdpfxoqu Udwj Aflor The integrated CCD camera recognizes a hole or a print mark and positions the screen with an accuracy of 0.02mm to the print mark. 2. welded steel frame and highly dynamic servo axes for maximum precision and smooth running 3. the printing table is made of cast aluminum with a flatness of ± 0.1 mm per meter 4. all guides are hardened linerar guides for a long service life 5. an integrated, controlled pneumatic squeegee pressure compensation, which acts directly on the individual squeegee holders, is able to level out even the smallest unevenness in the printed material. 6. the material is kept in a floating state during application and removal, which guarantees scratch-free transportation.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Place: Austria Available immediately Bledpfoxy Rddsx Afler

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. Bodexwhw Aepfx Aflslr FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Year of construction: 2025, condition: new, functionality: fully functional, Applications & Customer Benefits: The Arno® Screen SD Series (SD 1300–2100 / SD 1500–3400 / SD 2100–6000) are robust, semi-mobile screening drums designed for metal recycling and material separation. Ideal for processing metal chips, sheet metal, punching waste, and electronic scrap, they deliver precise three-fraction separation, high throughput, and flexible configuration for various screening tasks. Bedpjxy I N Rjfx Aflolr Key Features: • Available in versions with Extension (larger drum area) or Bunker (uniform material feed) • Exclusive hexagonal drum design for superior precision and flow • Adjustable perforation sizes for customizable screening performance • Semi-mobile, foldable structure for flexible setup and transport • Optional Hardox drum plates for extended durability and wear resistance Tech Highlights: Sieve length 2100/3400/6000 mm · Screen Perforation 1-100/6-100/10-100 mm · Screen Perforation 1-100/6-100/10-100 mm · Power 5,5/7,5/7,5 kw · Installation surface 3,3 x 2,1 x 2,9/5,6 x 1,8/9,25 m

Condition: used, Year of construction: 2007, functionality: unexamined, total length: 6,100 mm, total width: 3,700 mm, Used screen printing machine CNC Balsfulland 100 with 4 print units. Installation of a UV lamp holder in place of the 4th print unit Blsdext Urxjpfx Aflor 1 pc. UV lamp Manufacturer: UVITERNO Type: Mono DSK-SE 7525 with EVO-Plus incl. exhaust fan Lamp length: 200 mm Lamp power: 200 W/cm 1 pc. external pretreatment station Manufacturer: GST, Type: VSP, Year of construction 2017 Consisting of: Curve conveyor belt with robust steel base frame and SEW drive motor Hill burner system with 1 burner, burner length: 200 mm Lifting and turning station, servo-pneumatic Siemens S7 control with touch display Safety device

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Bledpfx Afox Agpzelor Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: used, functionality: fully functional, Kolb RB5D Stencil Cleaning System Operating hours: 1,781 h Screen stencil dimensions: max. 750 x 585 mm Power: 1.7 kW, Connection: 230 V Cleaning chamber capacity: 75 liters Dimensions: 185 cm x 100 cm Weight: approx. 240 kg Bedpfeqn U Hgox Aflslr Shipping is possible upon request. The machine is fully functional and ready for use. Please see the photos for the visual condition and other details. The key for the emergency stop switch is no longer available. With option: stainless steel aluminum operating platform With option: wash cycle counter and operating hours display #7891

Condition: new, Year of construction: 2025, functionality: fully functional, Place: Austria Bjdexy Nkpjpfx Afljlr Available immediately

Condition: used, For sale: gas-powered drying tunnels: Tesoma Compact G-18-HHS 2020 – 11,000 Euro, Tesoma DLT-G-17-HH-SC 2019 – 16,500 Euro. Very good condition. Blsdpfjv Eulyjx Aflor

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Bljdpfxjwp Rqfo Aflor Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Cincinnati PAK 600 Extruder Specifications The Cincinnati PAK 600 is a single-screw extruder designed for high-throughput plastic processing applications. • Drive System: Requires two electrical drops—one for the control cabinet and another for the drive cabinet. • Electrical Load: Maximum amp load depends on the standard AC motor & drive, as well as the number of barrel and die zones. Electrical engineering will determine the exact amp load based on specific configurations. Blsdpfx Afjwm Ngyslsr • Operational Rating: Rated at a service factor (SF) of 1.0 at 1750/100 rpm.

Condition: used, Year of construction: 1986, Please contact ATS Norway for more information Please provide reference number upon request: 20528 Specifications: - 1986 model - Unknown hours - Feed box - Side conveyor - Service taken myself - Screen - Conveyor belt - Ready for delivery Description: We have a 1986 Haahjem ctc 110 crusher w/side conveyor and screen for sale. The crusher has unknown hours as the hour meter does not show. All services have been performed by the owner. The crusher bearing on the left side is gone. Some additional cost must be expected to get this in order again. Ready for delivery. Own weight: Blsdpfxowpic He Aflor Model: CTC110

Condition: used, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h Bljdsxzrzaopfx Aflor ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg WARNING!! This machine is a return item. Mechanical damage to the casing, broken electrical box.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Available immediately Bodexy Iikopfx Afljlr

Condition: not inspected (used), functionality: unexamined, Year of construction: 2013, machine/vehicle number: JS-GL4560FM, Used Shenzhen Juisun semi-automatic glass screen printer (Precise Electromotion Screen Printing machine) Manufacturer: Shenzen Juisun Screen Printing Machinery Co., Ltd. Bsdexiv Iyjpfx Aflolr Model: JS-GL4560FM Voltage: 380V (20A) Includes extra spare parts (see photos)

Year of construction: 2022, operating hours: 2 h, condition: new, Oversize conveyor length / width: 4,900 x 1,000 mm Engine / type / power: JCB / 444 TA4-55/1 / 55 kW Bunker volume: 5 m³ Fine grain belt length / width: 7,200 x 1,000 mm Effective screening area: 30 m² Screening capacity: up to 150 m³/h Drum diameter: 2,000 mm Drum length: 5,500 mm Working position dimensions: 15,230 x 6,200 mm (LxW) Transport position dimensions: 12,000 x 2,550 mm (LxW) Blodpfst R Rgmjx Aflor Screen drum with replaceable screen linings (currently fitted with square mesh 60 x 8 mm).

Year of construction: 2022, condition: as good as new (ex-display), Log cleaner Disc screen, disc cleaner for cleaning and sorting firewood. Bsdoci U I Nopfx Afljlr Fire Wood Cleaner Woodsifter

Condition: new, Year of construction: 2025, In stock: The STF 3.0 floating sink separator with our highly efficient SP1000 Mk2 centrifuge and our VS1 water screen. A compact but powerful washing system that is low-maintenance and can wash/sort up to 3000 kg/h of hard plastics. Blsdpfxoxhf Nwo Aflor The machines are made entirely of 304 stainless steel, so salt solutions can be used without any problems. An excellent starting point for a good homemade zinc float installation. The machines are in stock and can therefore be delivered within a week. Ask us for further information.

Condition: used, Year of construction: 1994, functionality: limited functionality, input voltage: 400 V, total length: 2,430 mm, total width: 1,880 mm, total height: 1,400 mm, conveyor belt width: 1,100 mm, Three-quarter automatic flatbed screen printing machine with tilt-opening upper assembly and pull-out device. Product removal device via vacuum suction cups, Natgraph Air Force dryer type 110-4002 TC, automatic copying system esc for frame size 105x125 cm, automatic screen washing system DSW, automatic wastewater treatment system (defective), 2 manual screen washing systems. The printing unit is operational, but is being sold as defective. No guarantee or warranty. The system is still in operation and can be inspected. Bljdow I N Ilopfx Aflor There is also the option to sell individual components of the system by offer. The system must be dismantled by the buyer – assistance possible!

Year of construction: 2013, condition: used, Working machine and 2 units available total. Located in the EU. Blodexy Sl Ajpfx Aflsr Ask for additional information.

Condition: as good as new (ex-display), Year of construction: 1998, SVECIA semi-automatic SSM-D year of manufacture 1998 Bedpfxohvrvij Aflelr refurbished machine, very good condition printing size 750 x 1050 mm operation via touch panelinfinitely variable adjustment of printing table, squeegeesqueegee speedpneumatic squeegee change-overpneumatic squeegee pressure compensation Pneumatic screen frame clamping with this machine all print parameters are stored for each jobif required, these settings are automatically recalled and set again LxWxH 2,0m , 2,55m , 1,4m Weight 700 kg youtu.be/-oPRkSZTFe8

Condition: new, Year of construction: 2025, In stock: The STF 3.0 floating sink separator with our highly efficient SP1000 Mk2 centrifuge and our VS1 water screen. A compact but powerful washing system that is low-maintenance and can wash/sort up to 3000 kg/h of hard plastics. The machines are made entirely of 304 stainless steel, so salt solutions can be used without any problems. An excellent starting point for a good homemade zinc float installation. The machines are in stock and can therefore be delivered within a week. Bodpoxhf H Nsfx Aflelr Ask us for further information.

Condition: as good as new (ex-display), Year of construction: 1998, SVECIA semi-automatic SSM-D, year of manufacture 1998 Bljdpfshylzvjx Aflsr like new conditionprinting size 880 x 1250 mm operation via touch panelinfinitely variable adjustment of printing table, squeegeesqueegee speedpneumatic squeegee change-overpneumatic squeegee pressure compensation Pneumatic screen frame clamping with this machine all print parameters are stored for each jobif required, these settings are automatically recalled and set again LxBxH 2,2m , 2,75m , 1,4m Gewicht 800 kg

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 110951103061440, Thieme semi-automatic 1010, built in 1995 reconditioned machine, very good condition, like new! Thieme squeegee unit Print height: max. 50 mm Print format max. 500 x 560 mm Outside frame: 1000 x 1100 mm Print table: 800 x 1000 mm 23Hgnqhag Performance: 1350 pcs./h Electric/compressed air: 400/230 V / 12 A, 50 Hz / 6 bar Blsdpfx Aevrzv Sjfljr Dimensions 1.7m X 2.3m H=1.6m 1200 kg