Used Screen Textile System for sale (41,145)

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Nwsdpfxjzp E T Se Akqjk Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: good (used), Year of construction: 2008, functionality: fully functional, A weighing system previously used for packing hard-boiled sweets, but suitable for all manner of snack foods, confectionery, nuts, seeds, etc. Features the following equipment: Nwodpfszaw Nuox Akqjk 1 x AST-2-1 stainless-steel hopper and vibratory feeding pan with manual gate. Hopper internal dimensions - 795mm long x 795mm wide. Overall dimensions - 1100mm long x 880mm wide x 1150mm high. 1 x AST-3-5 stainless-steel bucket elevator. Each bucket dimensions - 380mm long x 115mm wide x 60mm high. Overall dimensions - 2650mm long x 680mm wide x 3400mm high. 1 x A10 -10-head multi-head weigher with touch-screen control panel and 1.6L smooth weighing pans. Programmable for up to different 50 programs. 1 x Stainless-steel gantry with height-adjustable feet and wheels. Overall dimensions - 1220mm wide x 1320mm deep x 1680mm high. Overall footprint of system (in current setup) - 3.7m long x 2m wide x 3.4m high.

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond. Njdpfx Akezlh Aueqowk

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: Nwodpoy An I Iofx Akqok 1 x Joy Conveyors product hopper. Manufacturer – Joy Conveyors Ltd. Overall dimensions – 550mm long x 610mm wide x 680mm deep. 1 x Joy Conveyors bucket elevator. Manufacturer – Joy Conveyors Ltd. 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Manufacturer – High Dream Intelligent Machinery Co., Ltd. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). 1 x Keymac servo-driven timing hopper. Manufacturer – Keymac Packaging Systems Ltd. 1 x Keymac vertical form, fill and seal twin bagging machine. Manufacturer – Keymac Packaging Systems Ltd. Model – BT2600 VFFS. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Electrical requirements – 220-240 V / 60-60 hz / 1 phase. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. System footprint - 7.5m long x 3.4m wide x 4.4m high.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm -Overall dimensions: 1100/800/1750 mm -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. Nwsdpozhv Rljfx Akqok The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Nedpfszcf Dlsx Akqswk Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Year of construction: 2026, condition: new, functionality: fully functional, The combination of FTJ-1175 jaw track crusher and FTB-1550 scalper screen are stone crushing and screening systems, which are often used in quarries, mines and construction sites. This type of equipment is designed for crushing and screening of hard rocks. Here are the general features of these two FABO equipments combined and serve as a single line FTJ-1175 Tracked Jaw Crusher: - Capacity: Ideal for crushing hard rocks and stones with high capacity. - Mobility: Thanks to its crawler structure, it moves easily in difficult terrains. - Jaw Opening: Thanks to its wide jaw opening, it easily crushes large-sized materials. - Efficiency: It offers long-lasting use with its energy-saving engine and durable construction materials. FTB-1550 Tracked Scalper Screen - Screening Capacity: Suitable for pre-screening of large volume and coarse materials. - Dimensions: Features a 1550 mm wide screen system, allowing for larger material capacity. - Durability: With its wear-resistant construction, it can be used in heavy-duty operations. - VariousScreening Options: Different sizes of screens allow separation of various material sizes. Advantages of the Combination: 1. High Performance: Crushing and screening of the material is done quickly in the same system. 2. Mobility: The crawler structure provides portability and offers the possibility of use at different sites 3. Operational Ease: Integrated operation on a single line saves labour and time. 4. Various Applications: Suitable for quarries, recycling plants and large-scale construction projects. With impressive crushing capacity, reduced operating costs, and simple maintenance, this combination is a reliable, high-performing solution for any project Nwjdpjzw Hkuefx Akqjk FABO’s innovative technology guarantees exceptional efficiency and performance, giving your projects a strong competitive edge.

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO ME Series mobile sand screening plant is an ideal solutions for the classifying materials which was provided as pre-crushed. Most important advantage of plant is having all equipment on only a single chassis. Transportation can be done by only one truck. TECHNICAL SPECIFICATIONS: - Hopper: 9 m3 - Plant Dimensions: 14130x4600x4160 mm - Production Capacity: 200-300 Tons Per Hour - Vibrating Screen and Deck: 2000x5000 (4 decks) - Total Motor Power: 65 Kw - Generator (optional): 100 kvA ME-2050 IS A COMBINATION OF: • Bunker (Hopper) • High Stroke Vibrating Screen • Folding type feeding and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) Nwedpfszw Hh Tsx Akqok FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2008, input voltage: 400 V, Gas dryer for textiles after screen printing, M&R Sprint 2000. The oven is in very good condition. Conveyor belt length: 6 m. Stepless regulation of temperature and belt speed. Nwsdpoxfkyijfx Akqek

Condition: used, Year of construction: 2009, functionality: fully functional, total width: 4,300 mm, total length: 3,700 mm, total height: 3,000 mm, Description Nedpfx Aksy Ai Ehoqewk For sale is a Tonello Laser Blaze 250 industrial laser finishing system, offered as a complete enclosed workstation. This high-performance system is specifically designed for laser-based garment finishing, enabling precise and repeatable effects such as denim fading, whiskering, engraving, and decorative surface treatments. The Laser Blaze series by Tonello S.r.l. is widely recognized in industrial denim production, offering a modern and sustainable alternative to traditional manual processes. The system utilizes a Rofin CO₂ laser source, known for its precision, stability, and reliability in continuous production environments. This unit replaces labor-intensive finishing methods such as hand-scraping, sandblasting, and chemical spraying, significantly improving consistency, efficiency, and environmental impact. The machine has been used in a professional garment factory environment and has been tested in operation with video documentation (March 2026). Recently serviced on 27.02.2026. Includes • Tonello Laser Blaze 250 enclosed laser cabin • Integrated laser processing unit • Computer workstation with control system • Electrical cabinets • Cooling unit (MTA) • Ventilation / exhaust connections • Operator control panel and integrated safety system Technical Details • Manufacturer: Tonello S.r.l., Italy • Model: Laser Blaze 250 • Laser source: Rofin CO₂ • Year: 2009 • Power: approx. 30 kW system • Voltage: 400V, 3-phase • Work area: approx. up to 150 × 150 cm • Application: Denim laser finishing and garment treatment Key Features • High-precision CO₂ laser technology for consistent results • Advanced control via Tonello CREA software • Capability for both flat and 3D (mannequin-based) processing • 360° garment effects without flat-pattern limitations • Double-position workflow for improved productivity • Fully enclosed workstation with integrated safety systems Technical Capabilities • Denim distressing (whiskers, chevrons, worn effects) • Laser engraving of logos, graphics, and textures • Photorealistic surface patterning • Multi-material capability (denim, leather, technical textiles) • High repeatability – identical results from first to last garment Sustainability Benefits • Eliminates need for sandblasting and manual abrasion • Reduces water and chemical consumption significantly • Lower energy usage compared to traditional laundry processes • Improves worker safety and production cleanliness Condition Used industrial condition. Machine is complete and was operational prior to factory shutdown. Tested and video recorded in operation (05–06.03.2026). Recently serviced (27.02.2026). Typical signs of use from production environment. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications • Denim laser fading and whiskering • Garment engraving and marking • Decorative textile finishing • Replacement for manual sandblasting processes Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling, loading, and transport. Professional dismantling strongly recommended due to system size and complexity.

Condition: good (used), Year of construction: 2006, functionality: limited functionality, 6-colour automatic screen printing machine, in good condition, little used. The machine has been dismantled due to lack of space. Nwjdpfx Aoyv Uunokqek

Condition: ready for operation (used), Year of construction: 2006, A complete screen and gravure printing system for paper and non-woven wallpapers is available. Output: 15000 rolls/24h, substrates: paper: 80g-150g/m², non-woven: 50g-150g/m², printing width: 1060mm, working width: 1200mm, printing speed: 5m-150m/min. Components: Preconditioning, gravure printing unit, 5x screen printing units, 2x screen gravure printing units, 5x intermediate dryers (standard version), 2x intermediate dryers (1.5 times dryer height), 1x main channel with 6x 4m zones, roller/unwinder, register embossing, double-head printing units. Including various peripheral devices and units. Total dimensions X/Y/Z: approx. 60m/8m/6m. Documentation available. On-site inspection is possible. Nedpfx Aket Rkatsqewk

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. Nwodjy Um T Hspfx Akqek 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request.

Condition: used, Year of construction: 1985, year of last overhaul: 2008, CLEARANCE SALE 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE STORK RD4 Textile Rotary Printing Machine – 8 / 12 Colors – 1850 mm – Used / Overhauled Make: Stork Model/Type: RD-IV Number of colors: 8 ( possible 12) Working width: 1850 mm Year of manufacture: 1985 Condition: Renewed / major overhaul completed in 2008, later preserved Heating system: Steam Included equipment: Njdpfjy A S Ryex Akqswk Fluff remover: Stork SU-II / 1850 Dryer: 6-chamber dryer Suitable for textile rotary printing operations requiring reliable multi-color production. MACHINE IS REFURBISHED , PROFESSIONALLY MARKED, DISMANTLED, STORED IN MILL-FLOOR - VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6471 Nwsdezn Rciepfx Akqok 1 x 2021 CERTUSS complete steam generator system (Type – CERTUSS Universal 600 TC) with chemical dosing and blow-down vessel, automatically PLC controlled. The 2021 CERTUSS Universal 600 TC Complete Steam Generator System is a high-performance industrial steam generator designed to deliver reliable, energy-efficient process steam for continuous production environments. With a steam capacity of 600 kg/hour, the system is ideal for food and beverage processing, bakeries, meat and fish processing, ready meal production, pharmaceutical manufacturing, commercial laundries, chemical processing, and other industrial applications. KEY SPECIFICATIONS: Manufacturer: CERTUSS. Model: Universal 600 TC. Date of manufacture: 2021. Steam output: 600 kg/hour. Fuel: Propane (but can be converted). High-efficiency industrial steam generator. Compact vertical design. Fast start-up from cold. Automatic PLC control system. Complete steam generator package with ancillary equipment. Suitable for continuous industrial process steam applications. Condition: Excellent - very low working hours.

Condition: as good as new (ex-display), Year of construction: 2023, total length: 3,400 mm, total width: 1,300 mm, total height: 820 mm, overall weight: 565 kg, power: 2.2 kW (2.99 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO CB 3000 Conveyor Belt is a robust, 3-meter transport solution for construction, recycling, horticulture, and industrial applications. Perfect for moving sand, soil, gravel, compost, and other bulk materials, it delivers reliable, efficient, and continuous material handling. This particular unit was used only for demonstration purposes, showcasing its functionality and excellent condition. Key Features: • Adjustable belt speed, angle, and length for versatile use • Modular and extendable design for longer transport distances • Integrated hour counter for maintenance tracking • Simple belt tension and height adjustment • Durable, low-maintenance build for continuous operation Tech Highlights: Nwsdpfx Asw N Imiskqok Speed 10 - 135 cm/s · Capacity 20 - 120 m³/h · Belt width 0.6 m · Hopper length 0.8 - 1.6 m · Hopper capacity 0.2 - 0.5 m³ · Drive power 400 V / 2.2 kW · Weight 565 kg · Width 1.3 m · Length 3.4 m · Height 0.82 m

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Nodeynnlijpfx Akqjwk Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: excellent (used), Year of construction: 2020, operating hours: 750 h, functionality: fully functional, overall weight: 12,500 kg, Model: Star Screen Zeta Star 75DK Year of Manufacture: 2020 Condition: Used Functionality: Fully operational Operating Hours: approx. 400h Power: 75 kW Drive: Perkins diesel engine Speed: Infinitely variable LxWxH (Deployed): 11,780mm x 8,100mm x 3,600mm LxWxH (Folded): 7,980mm x 2,490mm x 2,765mm Weight: 12.5 t - Crawler chassis max. 1.5 km/h - Feed hopper Nwedpfexnbddox Akqjk - Radio remote control - Discharge conveyor for finished material, B=650mm, height-adjustable max. 2.6m - Discharge conveyor for oversize material, swiveling discharge belt, B=800mm, height-adjustable max. 3.7m

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. System comprises of: 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan). Nodpfx Ajyvac Askqswk

Year of construction: 2026, condition: new, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MEY Series mobile sand screening and washing plant is an ideal solutions for the classifying and washing of materials which was provided as pre-crushed. Most important advantage of plant is having all equipment on only a single chassis. Transportation can be done by only one truck. TECHNICAL SPECIFICATIONS: - Hopper: 8 m3 - Plant Dimensions: 13500x4500x3600 mm - Production Capacity: 120-200 Tons Per Hour - Screw Washer Size: 600x6000 mm Double Helix Nwedpfx Akjy Twqmsqek - Vibrating Screen and Deck: 1600x4500 (4 decks) - Total Motor Power: 68 Kw - Generator (optional): 130 kvA MEY-1645 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Screen with Washing Nozzles • Double Helix Screw Washer • Folding type feeding and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2011, condition: ready for operation (used), Various laboratory devices are available for quality testing in the textile industry. 1) Textile tensile tester Textechno FPA ME, year of manufacture: 2000, max. speed of pull-off clamp: 5000mm/min, clamping dimensions X/Y: 46mm/10mm, clamping pressure 3bar/5bar/8bar: 1200N/2000N/3200N, max. clamping distance: 960mm, force transducer: E 10N/E100N/E1000N, accuracy: +/-1%, machine dimensions X/Y/Z: approx. 885mm/700mm/1730mm, weight: approx. 200kg, control: Textechno Bus. 2) Illuminated table White Screen Normlight, lighting: 3x 36W, machine dimensions X/Y/Z: approx. 1250mm/800mm/850mm. 3) Textile length measuring machine Yuan More YG086, year of manufacture: 2011, measurement: linear yarn density, yarn count: 1-6, frame circumference: 1000mm (+/-1mm), frame speed min./max.: 30r/270r/min, max. yarn frame turns: 9999, yarn traverse stroke: 35mm (+/-0.5mm), single yarn tension range: 0cN-100cN, machine dimensions X/Y/Z: approx. 850mm/680mm/550mm, weight: approx. 50kg. 4) Digital microscope Di-Li. 5) Light box Just color Viewing Light. 6) Cardwinder Graf & Co CCW15. Documentation available. On-site inspection is possible. Nsdpfouanrwox Akqswk

Condition: good (used), Year of construction: 2006, power: 3 kW (4.08 HP), Zentner Soltec Screen Washing Unit ST 100 Manufacturer: Zentner Systems GmbH Model: Soltec ST 100 Year of manufacture: 2006 Serial number: 0505 / 06 Operating voltage: 3 × 400 V Mains frequency: 50 Hz Operating power: 3 kW Operating pressure (air): 6.0 bar Design: Enclosed stainless steel screen washing cabin Application: Automatic cleaning of screen printing frames Special features: – EX safety signs present Njdpfx Akjyrndgsqewk – Integrated exhaust/ventilation system – Compact design with separate control cabinet Location: Schierling Viewing possible by appointment.

Year of construction: 2020, condition: excellent (used), 2020 Coherent EasyJewel 5 Premium Desktop Class 1 Fibre Laser Marking and Engraving System With Rotary Axis The Coherent EasyJewel 5 Is A Premium Desktop Class 1 Fibre Laser Marking & Engraving System Designed Primarily For Jewellery, Watches, Medical Devices, Precision Engineering & Small Industrial Components. It Is Capable Of High-Resolution Engraving, Deep Engraving, Annealing, 2D Code Marking, Optional 3D Engraving Using Coherent's Laser Suite Software. Chamber Dimension W300 x D200 x H120mm. Marking Field Options Standard Lenses Include Fields Like 120 x 120mm, 180 x 180mm, or 240 x 240mm. Pulse Width 4 to 200ns. Pilot Lase: 660nm (Visible Red Guide). 'Z' Axis Travel 120mm. Voltage 230V. S/No. 40475422 (2020). Nwodpjzvpy Nefx Akqok With BOFA Extraction & Filtration Unit, Laptop With Software, EasyJewel Special Ring Holders, EasyJewel Chuck For Bangle/Bracelet Marking & EasyJewel Chuck For Irregular Shaped Rings. Overall Dimensions L770 x W540 x H750mm. Weight Approx. 87kg.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Njdjy Hlvwopfx Akqjwk Condition – Fully operational.

Condition: new, Year of construction: 2026, functionality: fully functional, color: other, CONSTMACH dewatering screens and hydrocyclone systems are specially designed for producers seeking high efficiency and quality in fine material washing processes. These systems deliver superior performance in washing materials up to 7 mm in size. Their most significant advantage is their ability to retain even the finest particles, down to 90 microns, within the material. This ensures high-quality standards, particularly in applications where preserving micronized material is critical, such as in construction sand production. Material loss encountered in classic washing systems with helical or bucket designs is minimized thanks to CONSTMACH technology. Additionally, the system offers easy maintenance, durable polyurethane screen surfaces, and the advantage of easy storage of the dry final product. These features both reduce operating costs and ensure production continuity. Dehydration Screen and Hydrocyclone Technical Specifications MODEL: CDS-1225 Dehydration Screen Dimensions (mm): 1,200 x 2,500 Hydrocyclone Diameter: 20" Slurry Pump Motor Power (kW): 37 Vibrator Motor Power (kW): 2 x 4.5 Production Capacity (tons/hour): 60 - 80 MODEL: CDS-1635 Dehydration Screen Dimensions (mm): 1,600 x 3,500 Hydrocyclone Diameter: 26” Slurry Pump Motor Power (kW): 55 Vibrator Motor Power (kW): 2 x 7.5 Production Capacity (tons/hour): 100 - 150 MODEL: CDS-2040 Dewatering Screen Dimensions (mm): 2,000 x 4,000 Hydrocyclone Diameter: 2 x 26” Slurry Pump Motor Power (kW): 75 Vibrator Motor Power (kW): 2 x 11 Production Capacity (tons/hour): 150 - 200 Why Choose Constmach Dewatering Screens? Choosing CONSTMACH dewatering screens and hydrocyclones means not only high performance but also reliability. Superior engineering design, energy efficiency, and low maintenance requirements ensure your facility runs smoothly for years to come. CONSTMACH develops customized solutions for its customers' production needs, offering both quality and durability. Therefore, if you are aiming for an efficient washing and dewatering process, the CONSTMACH brand is the right choice for you. Nodpfxsxqan Tj Akqswk What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Information: The prices listed in the advertisement are shared based on current information. However, due to changes in market conditions and supply processes, our prices may vary from time to time. Therefore, we recommend requesting a quote from us for accurate pricing information.