Used Chipboard for sale (225)

Condition: good (used), Note: The images are for illustrative purposes only. - The workbench frames are commissioned unassembled; - Production time is typically approximately 3-5 business days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Included in delivery: 4x square tubes, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole pitch: 75 x 50 mm Drill hole diameter: 13 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm Tedpfxowgicbj Am Toa 1x chipboard, used Thickness Chipboard: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: coated if necessary (two-part if necessary) 6x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 16x washers: M12 Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,000 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 1,700 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm 06x self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: Tedertqm Djpfx Am Tsa This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), The scope of delivery includes: 02x workbench frames, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Todpfx Amoi Ewqyj Tea Frame height: 900 mm Frame depth: 1,000 mm Includes cross and diagonal braces, base plates The frames are pre-assembled (bolted framework) 04x workbench crossbars, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Crossbar type: TRV1-240-084-30CE Clear span: 2,400 mm 08x locking pins, new Design: fully galvanized 01x chipboard, grade II, used Chipboard thickness: 38 mm Chipboard width: 2,580 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 01x chipboard, grade II, used Chipboard thickness: 38 mm Chipboard width: 2,380 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 16x drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are intended to illustrate the material. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied disassembled; - The workbench frames are pre-assembled; - The production time is usually approximately 5 working days.

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of racking rows: 1 unit Length per racking row: approx. 5,025 mm Number of bays per racking row: 02 units, each 2,400 mm Number of levels including base level: 04 units Included in the scope of delivery: 03x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian Blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Includes cross and diagonal braces, Base plates The uprights are delivered unassembled (bolted framework) 2,350 mm high 800 mm deep Note: The racking uprights are delivered unassembled. We can assemble the racking uprights for an additional charge of €17.50 plus 19% VAT. 16x Pallet racking beams, new Material color: RAL 7035 light gray Box profile: 80 x 40 mm Beam type: ASM50-CES80|40|1.5 Design: Step beam Agraffe: 5 hooks Clear width: 2,400 mm Max. load per beam pair: 1,600 kg, with evenly distributed load 08x Chipboard II grade, used Thickness: 22 mm Dimensions: 2,380 x 710 mm Surface: possibly coated (possibly in two parts) 32x Locking pins, new Design: fully galvanized Tedpfekti Sxsx Am Tea For securing the longitudinal beams against unintentional lifting 12x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 06x Shims, new Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and shelf loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), clear span: 1,350 mm, frame height: 2,000 mm, Technical data for the packing table: Manufacturer: Stow Type: Pal Rack NS Basic data: Total width: approx. 1,550 mm Total depth: approx. 1,000/400 mm Total height: approx. 2,000 mm Number of levels (1,000 mm deep): 02 pcs. Number of levels (400 mm deep): 02 pcs. Working height: approx. 938 mm The scope of delivery includes: 02x shelf uprights, used Tsdpfx Asrn S Udsm Toa Material color: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Upright height: 2,000 mm Stand depth: 1,000/400 mm Incl. cross and diagonal struts, base plates The uprights are pre-assembled ( bolted framework ) 02x foot plates, new Material color: blue Total width: approx. 100 mm Total depth: approx. 110 mm 08x Shelf crossbars, used Material color: orange Beam type: PNBH0488 Box profile: 80 x 50 mm clear width: 1,350 mm 16x locking pins, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x chipboard, second-hand Chipboard thickness: 38 mm Chipboard width: 1,550 mm Depth of chipboard: 1,000 mm Surface: coated if required (two-piece if necessary) 01x chipboard, used Thickness chipboard: 38 mm Chipboard width: 1,330 mm Depth of chipboard: 1,000 mm Surface: coated if required (two-piece if necessary) 02x chipboard, used Thickness chipboard: 38 mm Chipboard width: 1,330 mm Depth of chipboard: 400 mm Surface: possibly coated (two-piece if necessary) 24x locking brackets, new Version: galvanized f. Crossbeam width: 50 mm The pictures serve to illustrate the material. The material color may vary. - The packing tables are picked unassembled; - The shelf stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Storage platform 4,000 x 10,000 mm, load-bearing capacity 500 kg/m² The scope of delivery includes: 4 uprights, single-sided 100 x 100 x 3 mm 2 uprights, double-sided 100 x 100 x 3 mm 4 main beams C+300 x 3 x 3,990 mm 10 cross beams S+300 x 2 x 4,800 mm 20 mounting angles 3 diagonal braces 18 chipboard panels P6, 3000 x 850 x 38 mm, underside white, top surface natural including fastening materials including load capacity signs Dimensions, technical data Steel structure: 4,000 x 10,000 mm Floor area: approx. 40 m² Todpjd Hl Niefx Am Tsa Height, top edge of flooring: freely selectable up to 3,500 mm (other heights available on request) Clearance height, underside: top surface minus 338 mm Load-bearing capacity: 500 kg/m² Uprights: 100 x 100 x 3 mm Main beams: C-profiles C+300 x 3 mm Cross beams: Sigma-profiles S+300 x 2 mm Flooring: 38 mm chipboard, one side white Uprights available in the following standard colors: RAL 7035, light gray RAL 7016, anthracite gray RAL 3000, fire engine red RAL 5003, sapphire blue Other colors available on request! Accessories, such as stairs, railings, etc., are not included in the offer but can be supplied at an additional cost. (Prices on request)

Condition: new, Storage platform 4,000 x 15,000 mm, load capacity 500 kg/m² The scope of supply includes: 4 uprights, single-sided 100 x 100 x 3 mm 4 uprights, double-sided 100 x 100 x 3 mm 6 main beams C+300 x 3 x 4,190 mm 15 cross beams S+300 x 2 x 4,800 mm 30 mounting angles 4 diagonal braces 27 chipboard panels P6, 3000 x 850 x 38 mm, underside white, topside natural Underside white, topside natural including fixing material including load capacity signs Dimensions, technical data Tedpfxed Htryo Am Tea Steel structure: 4,000 x 15,000 mm Floor area: approx. 60 m² Height, top edge of flooring: freely selectable up to 3,500 mm (other heights on request) Clear height, underside: top surface minus 338 mm Load capacity: 500 kg/m² Uprights: 100 x 100 x 3 mm Main beams: C-profiles C+300 x 3 mm Cross beams: Sigma profiles S+300 x 2 mm Flooring: 38 mm chipboard, one side white Uprights in the following standard colors: RAL 7035, light gray RAL 7016, anthracite gray RAL 3000, fire red RAL 5003, sapphire blue Other colors on request! Accessories, such as stairs, railings, etc., are not included in the scope of supply. These can be supplied at an extra cost. (Prices on request) Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet (without unloading)

Condition: new, clear span: 1,350 mm, total height: 2,000 mm, Current delivery time: approx. 10-15 working days Order goods Technical data for the shelf trolley: Shelving system: Kimer Number of levels: 05 pcs. The scope of delivery includes: 02x shelf uprights, new Material color: RAL 5003 sapphire blue Profile dimensions: 50 x 55 x 1.50 mm unassembled, incl. base plates Shelf depth: 400 mm Shelf height: 2,000 mm 10x shelf beams, new Material color: RAL 2004 orange Cross beam length: 1,350 mm 20x Kimer locking pins Material color: sendzimir galvanized Tjdpfetxagasx Am Tea 05x chipboard, used Thickness: 22 mm Width: 1,340 mm Depth: 395 mm Design: multi-part 10x depth bars, new Material color: sendzimir galvanized Shelf depth: approx. 400 mm 04x swivel castors, new swivel (360 degrees) Loadable up to 250 kg General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,750 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,450 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,750 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm Todpfxjtk Iwps Am Tja 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 800 mm We are offering a used workbench from the manufacturer Jung Heinrich for sale. The scope of delivery includes: 02x Workbench frames, used Material color: blue Frame profile: 76.2 - 100 mm Frame height: 900 mm Frame depth: 800 mm Incl. cross and diagonal braces, base plates The frames are pre-assembled (bolted framework) 04x Workbench crossbars, used Material color: orange Box profile: 85 x 40 mm Crossbar type: GN85x41mm Clear width: 2,775 mm 08x Locking pins, used Tsdpshm Stljfx Am Tea Design: fully galvanized 01x Chipboard, grade II, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,980 mm Chipboard depth: 800 mm Surface: possibly coated (possibly in two parts) 01x Chipboard, grade II, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,755 mm Chipboard depth: 800 mm Surface: possibly coated (possibly in two parts) 16x Drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are for illustrative purposes. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied unassembled; - The workbench frames are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: as good as new (ex-display), Demonstration unit with 7 operating hours immediately available (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Year of manufacture: 2023 Infeed opening 800x1000 mm Motor: 22 kW; 400 V - 50 Hz - 3 phase Blades: multiple-rotation hydraulically actuated slide Screen size selectable (10 - 40 mm) Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star/delta start - fast hydraulics - auto. OFF when rotor is idling - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Shredder raised by 30 cm (preparation for conveyor belt) Additional shredder options: Tjdpfx Amov Sqrpj Tsa - Articulating conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - The moisture content (as received) must be below 30%, - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: used, Year of construction: 2021, total length: 4,000 mm, total width: 1,200 mm, total height: 1,750 mm, overall weight: 1,000 kg, power: 7.3 kW (9.93 HP), No. 04539 Profile sanding machine / automatic edge processing machine Rehnen KBA Used, year of construction 2021, low operating hours Tedpszhbzcofx Am Toa Profile sanding machine / automatic edge processing machine for sanding edges, routing profiles and sanding profiles in through-feed operation Materials to be processed: solid wood, chipboard and MDF Fields of application: stair construction, furniture production, shopfitting, interior finishing, etc. Material thickness up to approx. 90 mm, centrally adjustable by handwheel Variable feed speed up to 6 m/min Total power 7.3 kW Pneumatically controlled and tracing profile sanding shoes with standard sanding belts Longer belt life due to long sanding belts and pneumatically height-adjustable oscillation High material removal thanks to calibrating roller - Continuously adjustable oscillating sanding unit (between 30 - 130 mm) / sanding and fine sanding via contact roller and sanding shoe / sanding belt size edge 2000 x 150 mm - 2 routing units with profile cutters 50 x 10 x 16 mm, Z4 / routing of radii, profiles and chamfers on top and bottom at 12000 rpm / controlled via frequency inverter - 2 profile sanding units for profile sanding with endless sanding belts via application-controlled, air-cooled steel profile sanding shoe / sanding belt size profile 30 x 1960 mm - Extendable roller conveyor at the front - Extraction connection diameter 160 mm - Workpiece feed via chain plate conveyor Transport dimensions approx. 4000 x 1200 x 1750 mm LWH Weight approx. 1000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: as good as new (ex-display), functionality: fully functional, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 300 mm, saw blade bore: 30 mm, rotational speed (max.): 4,750 rpm, total length: 6,535 mm, total width: 1,340 mm, total height: 2,901 mm, overall weight: 1,100 kg, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, It just keeps running – in countless businesses. Day after day, meter by meter, the STRIEBIG STANDARD saw cuts the most diverse panel materials. Always with the highest precision, always with sharp edges and dimensionally accurate cuts. Universally applicable for a variety of panel materials: Whether chipboard, OSB, MDF, acrylic glass, composite, or plastic panels, the STANDARD enables precise cutting of various materials. Self-supporting, solidly welded construction with hardened guides – these have always set the STANDARD’s saw frame apart. This frame, the heart of every STRIEBIG panel saw, has been continuously improved over the years. The absolute parallelism between the upper guide rail as well as the center and roller support ensures cutting precision is maintained over many years. Additional technical data: Cutting height: vertical: 2240 mm | horizontal: 2100 mm Emission sound pressure at the workplace: 79 dB Saw blade speed: 4750 rpm Compressed air connection: 6 - 10 bar Rated power consumption: 7.3 kW Tjdswztyaopfx Am Tja Comprehensive standard equipment: Heavy-duty, self-supporting, rigidly welded, torsion-resistant saw frame Sturdy, long-lasting steel support beam construction Robust mounting of the motor carriage ensures high cutting precision Powerful, high-torque 5.5 kW motor (7.5 HP) TRK dust extraction Model TRK 2 with automatically retracting aluminum slatted frame and plastic supports Bracket for wall mounting 17-position roller support with 3 foot brakes (Model 6224) Strip stop for repeat cuts Program cam switch for recurring dimensions Small parts tray made of aluminum Supersilent sound insulation to reduce saw blade noise Mechanical motor brake Optional equipment: Striebig paper holder Striebig complete aluminum small parts tray Includes delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Tsdpsd Hkqhjfx Am Tea Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction Tsdpfx Amsyzxfns Toa - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: used, Year of construction: 2005, functionality: fully functional, HOLZ-HER 6110 CUT 70 Panel Saw A HOLZ-HER 6110 CUT 70 panel saw is for sale, designed for precise cutting of chipboard, MDF, and other panel materials. The machine is located in Labin (Istria, Croatia). Price: 25,000.00 EUR Service and Condition The machine is regularly serviced. A new computer and a new label printer were installed a few months ago. It is ready for immediate use. The CUT 70 model is designed for fast and precise cutting of panel materials and enables reliable and efficient production in carpentry workshops and industry. If you are interested in purchasing the entire production facility, please contact us. We will be happy to discuss a serious offer. The following are also available in the facility: HOLZ-HER Eco Master 7120 CNC machining center HOLZ-HER Sprint 1321-2 STUF edge bander Lazzari UNO 3000i circular saw Polymac curved edge bander Polymac ABS edge trimming machine Busellato jointer Table router for making grooves Tjdpfx Aszp U Raom Tsa Overhead router Contact: Damir Verbanac 📞 +385 91 22 55 349 Also available via WhatsApp or Viber.

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software Todoiz A Ezspfx Am Tja The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Efficient and precise CNC CORMAK C1325 milling plotter, has a structure made of steel and cast iron, which provides it with adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood or PVC, plexiglass, dibond. Dissecting table with four independent vacuum sections with dimensions of 1300x2500 mm. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1080 kg Machine dimensions 2100 x 3100 x 2200mm Table height 715mm Tedpfx Ajf Eyqqjm Tja Vacuum pump 5.5kW (included) Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h Highest class security barriers: Optionally available highest quality light barriers The safety zone determined by the sensors does not allow you to enter the machine's operating area A set of barriers ensures the operator's safety Gate height in the Z axis up to 450 mm UCANCAM V11 software(possibility to import files from Corel, Autocad). File import/export, text editor and input Tool set: mills, drills, holders *Unloading and positioning the machine by the customer. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis for 350mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP Control - Digital Data Processing Machine equipped with the function of remembering the last track of the G-code (In the event of a power failure or interruption, it starts working from the last point without losing time and material.) The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X,Y,Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. CNC milling plotter CORMAK C2040 is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass, dibond and metals. The plotter is mainly intended for use in the furniture and modeling industries. Dissecting table with four independent vacuum sections with dimensions of 2100x4000 mm. Design Tjdevupr Tepfx Am Tsa Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2100 x 4000mm, Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor Linear bearings: trapezoidal rails, Hiwin carriages Spindle High-quality brushless spindle that is characterized by durability. Additionally equipped with an innovative AIR / not liquid cooling system! The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing Digital Signal Processing The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2100x4000mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1580 kg Machine dimensions 2270x4570x2200mm Table height 715mm Guides linear Vacuum Pump 7.5kW or 5.5kW (optional) Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: good (used), Year of construction: 2014, input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 2,100 mm, cutting width (max.): 4,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, For sale: Complete vertical panel saw system suitable for acrylic, plexiglass, plywood, and wood-based panels, along with a heavy-duty dust collection system. Fully operational. • Panel Saw: MAKK / Bala Makina Vertical Panel Saw • Dust Extractor: Pettini Franco E.S. Model E.F. 500.B (Year of Manufacture 2014) Tedpfx Aszqd Idjm Tea • Applications: Cutting acrylic, plastic sheets, plywood, MDF, and chipboard. • Includes: Vertical cutting frame, saw head, dust extraction tower with collection bags. (Note: blow gun attachment on the table is not included).

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Tsdpsx Iwfmsfx Am Tja Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: used, ONLY BEAMS for Stow pallet racking: Beam sizes: 2900*120 mm 3600*140 mm 1800*80 mm 3500*145 mm 2700*80 mm 1900*120 mm 4400*160 mm 3700*160 mm Tsdpfx Aehryh Hsm Tsa If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking, as well as accessories, and will be happy to assist you with your planning. Other accessories available include: Frame, corner, and end protectors, push-through guards, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Please request shipping costs by providing your postal code, location, and the desired quantity of items. Other service offerings: Planning, racking installation/disassembly, purchase/sale Changes and errors in technical data, information, and prices, as well as sales subject to prior sale!

Condition: used, Year of construction: 2006, drilling depth: 28 mm, Used Koch Drilling and Dowel Insertion Machine, Sprint-PTP-3 Technical data of the machine: Workpiece dimensions: Length Y: 110-800mm Width X: 20-1200mm Thickness Z: 14-60mm Material: Chipboard/MDF/Softwood Machine with 2 working areas. 2 workpieces with a maximum width of 600mm each can be loaded independently of each other. Tedjzbunkepfx Am Tsa Working height 900mm - with horizontal drilling station - with glue application and dowel insertion station - with 1 oscillating conveyor - Drilling distance vertically Z above the support table: 35 mm - 1 stop rail on the left and right - Mechanical digital displays for height adjustment - Work cycle triggered by a manual button Koch Numeric with 1 NC axis (X) Positioning control with PC (Windows XP Professional PC) Including widened machine frame for a maximum workpiece width of 1200mm 2 additional workpiece clamping cylinders Center stop for 4 working areas (removable for wide workpieces) Horizontal drilling station with 1 drilling spindle: Max. drilling depth 28mm Drill chuck Ø10mm Total drill length 70mm Drill speed 7200 rpm With dowel hole blow-out Glue application and dowel insertion station Dowel diameter: 8mm Dowel length 30mm Dowel projection 7-14 mm Set to 11mm Tolerance for wood dowels: --- Dowel length +/- 1 mm --- Dowel diameter +0.1/-0.2 mm With electronic glue monitoring (ELC) A monitoring device is installed before the glue valve, which measures the glue flow during each work cycle. If no glue is injected at a valve, the machine interrupts its work cycle and displays the corresponding glue valve in the control cabinet. Electrical values: Connection value: 400V, 50 Hz, 3 phases Voltage fluctuations max +6% to 10% Air connection 1 x R 1/2" internal thread 7 bar Extraction air velocity: approx. 30m/sec

Condition: excellent (used), Year of construction: 2013, Weinig Powermat 600 automatic profiling planer, net price €68,800 Technical specifications: Year of manufacture: 2013 Working width (with a cutting circle of 93 - 125 mm): 20 - 230 mm Working height (with a cutting circle of 93 - 125 mm): 10 - 120 mm 7 spindles First lower horizontal spindle, 5.5 kW (7.5 HP) motor First right vertical spindle, shared motor with the left vertical spindle, 11 kW (15 HP) First left vertical spindle, shared motor with the 1st right vertical spindle Second right vertical spindle, 5.5 kW (7.5 HP) motor First upper horizontal spindle, 7.5 kW (10 HP) motor Second upper horizontal spindle, 7.5 kW (10 HP) motor Second lower horizontal spindle, 5.5 kW (7.5 HP) motor Electronic feed with brake, steplessly adjustable 5 - 30 m/min. 4 kW (5.5 HP) motor Operating voltage: 400 V (voltage range 380 - 420 V), 50 Hz All spindle motors are IE2 rated. All spindles have high rotational accuracy. Basic equipment for PowerLock. Surfacing table length 2 m (including a longitudinal guide) Marathon Coating for the machine table and fences Special coating for protecting table segments and fences against excessive wear. Recommended for processing abrasive materials (e.g. tropical wood, MDF, chipboard). OPTION TO PURCHASE THE FOLLOWING MACHINES AT SEPARATE PRICES: 1. Weinig Rondamat 960 Powerlock (automatic straight knife and profile grinder), net price €13,500 Specifications: Weinig Rondamat 960 Powerlock / HSK profile grinder. High-precision knife grinder for sharpening straight knives and profiling with a template. Sharpening straight knives in the cutting block. Manual grinder for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: ceramic 5 mm, borazon 10 mm Grinding wheel bore: 60 mm Tool circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1.1 kW Spindle speed: 1700/2000/2400/3000 rpm Clearance angle: Radial: (rear) 10 - 30 degrees, Axial: 0 - 20 degrees For rotary heads up to 60 degrees Coolant tank approx. 50 liters Table feed 0 - 240 mm Electrical connection approx. 2 kW Tjdpfeytd S Nex Am Tea POWER LOCK SYSTEM option For grinding Powerlock tools. Tool holder with manual quick-change HSK system. Radial table mounting with precise adjustment, max. tool width 240 mm. 2. WEINIG OptiControl 970095 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 Tool diameter max. 300 mm Tool length 0 - 240 mm Radial measuring range (radius): 150 mm Non-contact measurement of tool dimensions, radius (R) and height (H) and display on electronic digital displays. Electronic digital displays indicating tool radius and height. HSK63 tool holder for PowerLock tools NEW PowerLock adapter HSK63, shank D=50 x 260 mm 3. Weinig Template maker Isel 3020 template milling machine, net price €1,700 Application: Profiling milling Creating templates for tools used for further processing on the machine, e.g. Weinig Rondamat 4. POWERLOCK MOUNTED CUTTING HEADS, price €7,500 Two cabinets full of cutting heads for various applications, approximately 45 pieces.

Condition: new, Year of construction: 2026, The PS12E-3000 format saw is a professional carpentry tool that stands out for its powerful specification and its ability to perform large-scale precision cuts. This advanced circular saw has been developed for a variety of woodworking tasks and is the ideal tool for demanding users. The main features of the saw, the PS12E-3000 wood panel saw: Two cutting discs: The saw is equipped with two cutting discs - a main disc and an undercutting disc - which provides ample cutting capacity for different types of wood materials. Large format table: One of the main advantages of this model is the extra-wide, bearing-mounted format table with support, which allows precise processing of large-format chipboard up to almost 3,000mm long and other large-sized wood materials. Additional undercutter: The additional undercutting blade makes the saw ideal for cutting furniture board and particleboard, eliminating the risk of splintering and ensuring an even cut. Disc inclination: The cutting disc can be tilted from 90° to 45° Maximum bar length: This saw is fitted with a bar of an impressive length of 2,300 mm Disc replacement: The replacement process is quick and efficient, thanks to the ability to remove the metal top and unscrew the blade. Saw blade guard: The saw has an effective saw blade guard, which can also be connected to the extraction system to help keep the work area clean. Powerful motor: The saw blades are driven by a powerful 3.8 kW, 400V motor, which guarantees smooth operation and efficient cuts. Control panel: The machine's control panel is located on the underside of the saw and includes an emergency stop, a knob for angle cuts (45°) and a knob for blade height adjustment with a locking mechanism. Additional measuring instruments: All guides are equipped with length and cutting angle scales, allowing the required angle and length to be quickly set without the need for additional measurements. Extraction compatibility: The saw is suitable for connection to a sawdust and chip extraction system with a suction nozzle diameter of 100 mm, which contributes to keeping the workplace clean. Application of the saw, format saw for wood: The PS12E-3000 format saw is an advanced tool that combines durability, precision and performance, making it the ideal choice for professional woodworkers and everyday woodworkers. Its versatile capabilities and advanced features allow it to handle a wide variety of woodworking projects and tasks in both industrial and craft settings. DIMENSIONS OF THE MOVING TABLE 3000 x 270 mm Tedpfx Amjvugc Ao Toa MAIN TABLE DIMENSIONS 800 x 385 mm SIDE AUXILIARY TABLE DIMENSIONS 880 x 800 mm BAND WIDTH 1220 mm SAW TILT 0-45° CUTTING HEIGHT AT 90° 100 mm CUTTING HEIGHT AT 45° 80 mm MAXIMUM SAW SIZE 315 mm MAXIMUM Blade size 100 mm MAIN SAW RPM 4000 rpm CUTTING SAW RPM 5800 rpm POWER OF ENGINE S6 5,3 kW / 7,1 hp POWER OF ENGINE S1 3,8 kW / 5,1 hp 400 V POWER SUPPLY WEIGHT 309 kg