Used Chipboard for sale (232)

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables Dcodpfx Acjupxupo Neg • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: excellent (used), Consisting of: 30 upright frames, 10,200 x 1,100 mm 358 beams, 2,700 x CE100 mm 174 end stops, 2,700 x 80 mm The permissible bay load is 2,400 kg (with evenly distributed load) = 800 kg per pallet! The upright frames are fully pre-assembled! If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories and are happy to assist you with your planning. Dedsyink Ejpfx Ac Njcg Further accessories available, such as: Frame and column guards, corner protectors, impact protection, push-through protections, chipboards, mesh shelves, rear mesh panels, and depth bars. Shipping: Please enquire about freight costs, specifying your postcode, location, and desired quantity. Additional services offered: Planning, rack assembly/disassembly, purchase/sale. Subject to technical changes, errors, and prior sale!

Condition: good (used), Year of construction: 2013, Approx. 200 bays of wide-span shelving / compartment shelving, SSI Schäfer, with steel shelves – used – : Price per bay ex location: Now only €99 instead of €225 (net), dismantled, packed, and loaded! Dedpfx Acjvxh Are Necg Additional single beams: €5 (net) / each Price per bay without steel shelves ex location: €225 (net), dismantled, packed, and loaded! Additional single beams: €5 (net) / each Manufacturer: SSI Schäfer Type: Carton flow rack (converted) Year of manufacture: 2013 Each bay with 3 shelf levels! Frame width: approx. 6 cm Frame depth: approx. 85 cm Beam height: approx. 6 cm Steel shelf dimensions: Depth: approx. 76.5 cm, width: approx. 30 cm, height: approx. 2 cm, qty approx. 130 pcs Depth: approx. 76.5 cm, width: approx. 20 cm, height: approx. 2 cm, qty approx. 76 pcs Bracing beam: height approx. 6.5 cm Available frame heights: Rack height: approx. 2.20 m Depth: 85 cm No. of frames: 288 pcs Rack height: approx. 2.50 m Depth: 85 cm No. of frames: approx. 145 pcs Available bay widths: Clear bay width: 1.80 m Beam with edge for steel shelves: 180 cm – 58 pcs Beam without edge (like a pallet rack – also ideal for chipboard panels): 180 cm – 344 pcs Clear bay width: approx. 2.20 m Beam with edge for steel shelves: 220 cm – 7 pcs Beam without edge (like a pallet rack – also ideal for chipboard panels): 220 cm – 237 pcs Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Dcedpfx Acstk It Se Nog Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Year of construction: 2019, condition: new, GOMA GS-900 Router Manufacturer GOMA Model / type of the GS-900 machine Production year 2019 Machine category Router Location Gorzów Wlkp. Conditions of delivery Dedefbl Epjpfx Ac Necg OWN COLLECTION Cost of delivery Customer cover Startup Type to be agreed Description Comments Value Data Spindle speed 9000 - 18000 rpm Two-speed engine 3.2 / 2.4 kW Head rotation +/- 45 ° Vertical table travel 150 mm Table dimensions 700 x 800; (700 x 1200) mm The GS-900 router is intended for processing solid wood and wood-based materials, i.e. chipboard, MDF, etc. Characteristic: - processing of solid wood and chipboard, - milling of grooves in plates, edge profiling according to a curvilinear route or a straight line, - remote control for working with templates extended from the table, - double bearings allow you to use the full engine power, - pneumatic smooth lowering of the spindle controlled by a pedal, - spindle tilt in the range of +/- 45 degrees. Machining of very short, very long, complex curved edges or other unusual work requires the use of special equipment necessary for safety reasons. This tooling must sufficiently cover the tool and guarantee reliable material guidance to prevent kickback or kicking. The headstock is tilted sideways manually; the vertical position is determined by the removable pin. In the table, coaxially with the tool, there is a retractable pin D = 10 mm. After extending and installing the bearing, it provides guidance for the template with the workpiece. Clamps that can be purchased at Lignum can be used to attach the item. The tool is mounted directly in the spindle. Combined with reinforced bearings, this allows high feed rates. ATTENTION!!! The purchase of tools lies with the buyer. Spindle lock yes Table Length 1200 Spindle length mm 700 Number of heads piece 1 Number of engines pcs. 1 Number of pistons pcs. 1 Number of Spindles pcs. 1 Maximum Working Length mm 2500mm Maximum Working Width mm 1200 Maximum cutting height mm 150mm The machine has CE marking yes Engine power kW 3.2 / 2.4 kW Supply voltage V 380 New machine yes Spindle speed rpm 9000/18000 Security Guards yes Full Operation and Maintenance Documentation yes Extraction connection mm yes 70 mm Table working surface mm x mm 1200x800 Noise Level Db 50 db Manual adjustment yes Very Good Condition yes Machine weight kg 500 Capacity m3 / h 1800 m3 / h Machining height mm 150 mm With noise suppression housing yes Other machines in the category Routers

Condition: used, power: 185 kW (251.53 HP), gearing type: automatic, fuel type: diesel, first registration: 01/2017, emission class: euro4, The Forus SE 250 (2017) is a powerful two-shaft pre-shredder, specially designed for processing various materials such as household waste, commercial waste, waste wood, green cuttings, electronic scrap, film, and paper. With its robust design and versatile equipment, it is ideal for use in recycling companies, composting plants, and by agricultural contractors. Technical data: Drive: Diesel engine: Volvo TAD8, 185 kW (251 HP), EU Stage IV Alternatively: Electric motor with 132 kW Shredding unit: Two rotors with a diameter of 570 mm Multifunctional unit (asynchronous) or triangle blades (synchronous) Number of blades: 65 (multifunctional) or 40 or 80 (triangle blades) Rotor speed: 5–30 rpm (multifunctional) or 14–26 rpm (triangle blades) Throughput (depending on material): Household waste: up to 25 t/h Waste wood: up to 20 t/h Commercial waste: up to 12 t/h Green cuttings: up to 15 t/h Biomass: up to 50 t/h Final grain sizes: 150–500 mm, depending on selected breaker bar Dimensions: Working position (L×W×H): 10,000 × 2,500 × 3,300 mm Transport position (L×W×H): 7,800 × 2,500 × 2,500 mm Weight: approx. 15,000 Equipment & options: Hydraulically raisable and lowerable overband magnet Hydraulically adjustable breaker bar (type A1–A4) Radio remote control for all functions Large loading hopper for easy filling Galvanized conveyor frame Optional: crawler chassis Areas of application: The Forus SE 250 is excellent for: Shredding household and commercial waste Processing waste wood, chipboard, and MDF boards Composting green cuttings and rootstocks Preparation of biomass for energy production Recycling of electronic waste, film, and paper Dcedpfxjwqqyvo Ac Njg

Condition: good (used), Year of construction: 2007, functionality: fully functional, The Italmeccanica MacPower 6TE/480/1600 is an industrial brushing machine / surface processing line for panels and sheet elements (e.g., MDF, chipboard, wood). The unit is designed for brushing, structuring, and finishing panel surfaces in woodworking and furniture manufacturing processes. Main features and parameters (typical for the MacPower series): • Working width: approx. 1600 mm • Multi-head brushing system (longitudinal and transverse brush groups) • Capable of processing both surfaces and panel edges • Designed for continuous operation in production lines • Robust industrial build, high efficiency, and consistent processing quality • Industrial 3-phase power supply • Typical applications: surface structuring, finishing of furniture panels, door components, wood-based boards The MecPower/MacPower series by Italmeccanica is used in industrial panel brushing lines. Machines are often equipped with multiple brush groups and a working width of 1600 mm, allowing the processing of large sheet elements. Italmeccanica MacPower 6TE/480/1600 Machine type: brushing / structure sanding machine for panels Manufacturer: Italmeccanica (Italy) 🔧 Working data • Working width: 1600 mm • Material pass-through height: approx. 130 mm (typical for the series) • Minimum piece length: approx. 400 mm • Number of working units: 6 • Top units: 2 • Side units: 3 • Longitudinal/transverse units: combination of longitudinal and transverse brushes • Edge processing: yes • Rollers/brushes: multizone horizontal and transverse brushes ⚡ Electrical data • Installed power: approx. 11–17 kW (depending on configuration) Dodpfxoykzigo Ac Njcg • Power supply: 3-phase 400 V, 50 Hz • Extraction system: dust extraction ports on the working units 📏 Dimensions and weight (typical for 1600 version) • Length: approx. 3300 mm • Width: approx. 2450 mm • Height: approx. 2250 mm • Weight: approx. 1500–3000 kg (depending on equipment)

Condition: used, Frame 7000*1100 mm Crossbeams 3600*120 mm Load capacity 2T/level If you require shelving or accessories in different configurations or versions, please contact us. We offer a comprehensive range of new and used shelving as well as accessories and are happy to support you with your planning. Additional accessories such as: Frames, corner and impact protection, anti-push-through devices, chipboard panels, wire mesh decks, rear mesh panels, depth bars are available. Dsdpfx Acjx U Agpo Nocg Shipping: Please enquire about shipping costs, stating your postcode, location, and the desired quantity of items. Additional services: Planning, racking assembly/dismantling, purchase/sale Subject to technical modifications, errors in details and prices, and prior sale!

Condition: new, Year of construction: 2026, C6090 milling plotters are professional precision devices designed for small-sized processing of materials such as: wooden materials, chipboard, plywood, MDF, OSB, or PVC plastics, plexiglass, dibond, light metals. Training at CORMAK headquarters included in the price for each machine. Optional - the latest UCanCAM V13 software in Polish language version Drive Motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. In the X and Y axes, high-quality toothed bars work, praised by users, which ensure high durability and precision, The Z axis is driven by a high-quality ball screw. All axes move on rail guides. The machine is equipped with a drive height sensor Spindle Brushless high-class spindle, which is characterized by durability. Liquid cooling system The spindle design uses high-quality machine bearings, characterized by very quiet operation and ensuring increased durability. Tool height measurement sensor - included. The spindle speed range is from 6000 to 24000 rpm. Software OPTIONALLY The latest UCanCAM V13 software in the Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software allows for quick and easy design of elements, which the program then converts to the so-called G-code. It is also possible to import ready-made files from other programs. Dcedpfx Acswcd Tmo Nog The machine is equipped with a function of remembering the last G-code path (In the event of a power failure or interruption, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing The DSP controller of the machine has its own processor and RAM, which ensures trouble-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. After a power loss, there is no need to initialize the program from scratch. The memory built into the controller allows the machine to work without having to load the program every time. Technical parameters Spindle 2.2kW / 3.0kW / s1 / s6 24000 rpm. inverter Workspace 600x900x300 mm DSP control Program resolution 0.001 mm Power supply 230V Weight 310 kg Machine dimensions width 1370x length 1720x height 2050 mm Table height 750 mm Linear guides Drive transmission toothed rack (Z axis - ball screw) Axis drives stepper motors UCanCAM V13 software in Polish language version (option) Equipment leveling feet, screws, keys, training cutter package, ER32 collets - 1/8 inch, 1/2 inch, and 5-6 mm Unloading and machine location on the customer's side. Power plug on the customer's side due to different sockets 16A / 32A Price is only for machine itself

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Dsdjf Eyqqepfx Ac Nscg Efficient and precise CNC CORMAK C1325 milling plotter, has a structure made of steel and cast iron, which provides it with adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood or PVC, plexiglass, dibond. Dissecting table with four independent vacuum sections with dimensions of 1300x2500 mm. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1080 kg Machine dimensions 2100 x 3100 x 2200mm Table height 715mm Vacuum pump 5.5kW (included) Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h Highest class security barriers: Optionally available highest quality light barriers The safety zone determined by the sensors does not allow you to enter the machine's operating area A set of barriers ensures the operator's safety Gate height in the Z axis up to 450 mm UCANCAM V11 software(possibility to import files from Corel, Autocad). File import/export, text editor and input Tool set: mills, drills, holders *Unloading and positioning the machine by the customer. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis for 350mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP Control - Digital Data Processing Machine equipped with the function of remembering the last track of the G-code (In the event of a power failure or interruption, it starts working from the last point without losing time and material.) The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X,Y,Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. CNC milling plotter CORMAK C2040 is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass, dibond and metals. The plotter is mainly intended for use in the furniture and modeling industries. Dissecting table with four independent vacuum sections with dimensions of 2100x4000 mm. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2100 x 4000mm, Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor Linear bearings: trapezoidal rails, Hiwin carriages Spindle High-quality brushless spindle that is characterized by durability. Additionally equipped with an innovative AIR / not liquid cooling system! The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing Digital Signal Processing The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2100x4000mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Djdpevupr Tsfx Ac Necg Power supply 400V Libra 1580 kg Machine dimensions 2270x4570x2200mm Table height 715mm Guides linear Vacuum Pump 7.5kW or 5.5kW (optional) Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: new, Shelving frame column cover. The Mega-M storage rack leg bumper is made of yellow lacquered steel. It has 4 holes for permanent installation in the floor and lateral holes for attaching e.g. a horizontal beam. The buffer provides greater safety for forklifts to move around the warehouse, reducing the risk of serious racking repairs. -Made of yellow lacquered steel. -Universal and easy to install. -Mounted on the front side of the racking. -Makes it possible to attach horizontal beams. -Used in industry to protect shelves from mechanical damage. -Increases safety, reducing warehouse maintenance costs. The offer concerns the leg bumper: Product code: MTP001334 - Height: 400 mm Djdpfx Aem Sg Dhjc Nocg - Width: 170 mm - Length: 300 mm - Metal thickness: 4 mm - Mounting hole diameter: 15 mm - Colour: RAL1023 yellow - Pallet quantity : 108 pieces Net price : 11 euro each. We have a wide range of shelving components, both new and used: frames, crossbars/beams and shelving fillings: crossbeams, WEMA gratings, mesh shelves or chipboards. Prices quoted are for the sale of wholesale quantities for export outside Poland, please contact us for details. Would you like to check wholesale and retail prices within Poland please contact us. * The above price is valid for a minimum purchase of one pallet. * Transport throughout Europe possible. * The aforementioned offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: used, Frame: 6000x1000 mm Dcedpfjpu Amhsx Ac Nsg Beams: 4300x120 mm If you require shelving or accessories in different configurations or versions, please contact us. We offer a comprehensive range of new and used racking as well as accessories, and are happy to assist you with your planning. Further accessories such as frame protectors, corner and collision guards, push-through protections, chipboard shelves, wire mesh shelves, mesh rear panels, and depth bars are available. Shipping: Please inquire about shipping costs by providing your postcode, location, and the desired quantity of items. Additional services: Planning, racking assembly/disassembly, purchasing/sales Technical data, specifications, and prices are subject to change and errors excepted. Prior sale reserved!

Condition: good (used), Crossbars: 1250*40*40 mm Djdpfx Ash Izuhec Nscg If you need shelves or accessories in other compositions or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you in your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grating, rear wall grating, depth bars available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: good (used), For pallet racks with 800 mm frame depth Size: 530x800 mm Load capacity: 140 kg / panel If you need shelves or accessories in other compositions or designs, please contact us. Dodpjgz H R Iofx Ac Nscg We offer a comprehensive range of new and used shelving units and accessories and accessories and are happy to assist you with your planning. Further accessories like for example: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Please enquire about freight costs, stating your postcode and location, as well as the desired item quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: new, Cantilever racking is ideal for storing long goods such as pipes, bars or plates. The uprights and profiles of our cantilever racks are made of particularly resilient, hot-formed IPE profiles. The racking rows are of any length and can be used on one or both sides. Cantilever racking is relatively easy to install and reconfigure. With the absence of actual shelving, adjusting the height and angle of the arms is simple and quick. This flexibility in shelving allows you to store a variety of loads. If you need shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories as well as accessories and are happy to support you in your planning. Further accessories like for example: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Please enquire about freight costs, stating your postcode and location, as well as the desired item quantity. Further service offers: Dsdpedmkv Hefx Ac Nscg Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: used, Frame: 9550 mm Crossbeams: 2700*100 mm, 2900*100 mm Load capacity: 2400 kg/level If you need shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelves as well as accessories and are happy to support you with your planning. Further accessories such as: Frame, corner, and impact protection, push-through protections, chipboard panels, grating, rear wall grids, depth bars available. Dcodjv D Ix Dopfx Ac Njg Shipping: Please inquire about shipping costs by providing your postal code, location, and desired quantity of articles. Further services: Planning, shelving assembly/disassembly, purchase/sale Subject to changes and errors in the technical data, information, and prices as well as prior sale!

Condition: like new (used), Ideal for traverses 2700 mm. If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. Dcsdpfepu Amwox Ac Neg Shipping: Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in technical data, information and prices as well as prior sale!

Condition: good (used), Ideal for pallet racks with frame depth 800 mm and 2700 mm crossbars. It is also suitable for other uses. Size: 1340*820 mm (55*105 mm) Load capacity: about 400 kg/m2 If you need shelves or accessories in other compositions or designs, please contact us. We offer a wide range of new and used shelves and accessories and will be happy to assist you in your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Dedjhbhavjpfx Ac Necg Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: new, Storage platform accessories (stairs, transfer station, handrail sluice, folding door) new: handrail lock: H1800 L1500 mm, H1800 L2300 mm, H1800 L3000 mm Folding door: beite 1500 mm 2000 mm If you need shelves or accessories in other compositions or other combinations or designs, please contact us. We offer a comprehensive range of new and used shelving units and accessories and accessories and are happy to assist you with your planning. An individual offer tailored to your needs is a matter of course for us. Further accessories like for example: Collision protection corners, ram protection walls, push-through protection, chipboards, gratings, depth bars are available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity the freight charges. Further service offers: Shelf assembly, maintenance, expansion, conversion, as well as repair. Dismantling, PURCHASE, recycling, disposal. Dcsdpfx Aefcrwyjc Neg

Condition: new, Available in all sizes, load capacity. I need the following information for the offer: -height, length, width -carrying capacity (kg/m2) -Floor: chipboard, grating Djdpsfcu D Ijfx Ac Nocg -Stairs or other accessories? Accessories such as stairs, railings etc. can be supplied at extra cost. (prices on request) Do you need shelves or accessories in other Compositions or designs, please contact us. We offer a comprehensive range of new and used shelves as well as accessories and will gladly support you in your planning. An offer tailored to your individual needs is a matter of course for us. Other accessories such as: Collision protection corners, impact protection walls, push-through protection, chipboard, Gratings, depth bars available. Shipping: Please inquire by indicating your postcode and location, as well as the desired item quantity. Further service offers: Shelf assembly, maintenance, extension, conversion and repair. Disassembly, PURCHASE, recycling, disposal.

Condition: used, Size: 200x1280 mm 3 EUR/piece 100x1280 mm 1.5 EUR/piece If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving units and accessories, and are happy to assist you with your planning. Additional accessories such as: Frames, corner and impact protection, push-through protections, chipboards, wire mesh decking, rear mesh panels, depth bars are available. Shipping: Please inquire about shipping costs by providing your postal code and location, as well as the desired quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Djdpfxoik E Npe Ac Njcg Subject to technical changes, errors, and prior sale!

Condition: used, Extension element for Dexion H280 boltless shelving. Price: €1.5/piece If you require shelving or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and are happy to assist you with your planning. Additional accessories such as: Frames, corner and collision protection, push-through protection, chipboard panels, wire mesh decking, rear mesh panels, and depth supports are available. Shipping: Please enquire about freight costs by providing your postal code, location, and the desired quantity of items. Additional services: Planning, shelf assembly/disassembly, purchase/sale All technical data, details, and prices are subject to change and errors excepted. Subject to prior sale! Dsdow Tavqepfx Ac Necg

Condition: new, Lattice rear walls -Anti-fall protection of stored goods at traffic and work areas If you need shelves or accessories in other combinations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories like for example: Frame, corner and collision protection, push-through protection, chipboard, gratings, depth bars available. Dcodpshciu Esfx Ac Nog Shipping: Please enquire about freight costs, stating your postcode and location, as well as the desired item quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: new, 890*1100 mm 250 kg/m² €16.15 500 kg/m² €18.02 750 kg/m² €22.50 If you require shelving or accessories in different configurations or designs, please contact us. We offer a comprehensive range of new and used shelving as well as accessories and are happy to assist you with your planning. Dsdpfxegqw A Hj Ac Necg Additional accessories available, such as: Frame, corner and collision guards, push-through protections, chipboard panels, grating, rear mesh panels, depth bars supplied. D7sz8e0 Shipping: Please request the freight costs by providing your postal code, location and the desired quantity of items. Other services offered: Planning, shelf assembly/disassembly, purchase/sale Subject to change and errors in technical specifications, information and prices. Intermediate sale reserved!